ATOMIC_FS_UPDATE now Projecte-Define

.gitignore

@@ -0,0 +1 @@
+Bestellung.xlsx

Hardware/.gitignore

@@ -27,4 +27,5 @@ fp-info-cache
 *.xml
 *.csv
 
-gerber/
+gerber/
+*-backups/

Hardware/oiler SMD-cache.lib

@@ -169,6 +169,33 @@ X 5V 9 -100 800 100 D 50 50 1 1 W
 ENDDRAW
 ENDDEF
 #
+# Memory_EEPROM_24LC64
+#
+DEF Memory_EEPROM_24LC64 U 0 20 Y Y 1 F N
+F0 "U" -250 250 50 H V C CNN
+F1 "Memory_EEPROM_24LC64" 50 250 50 H V L CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+ALIAS 24LC02 24LC00 24LC04 24LC08 24LC01 24LC512 24LC64 24LC1025 24LC32 24LC256 24LC128 CAT24C256 CAT24C128
+$FPLIST
+ DIP*W7.62mm*
+ SOIC*3.9x4.9mm*
+ TSSOP*4.4x3mm*P0.65mm*
+ DFN*3x2mm*P0.5mm*
+$ENDFPLIST
+DRAW
+S -300 200 300 -200 1 1 10 f
+X A0 1 -400 100 100 R 50 50 1 1 I
+X A1 2 -400 0 100 R 50 50 1 1 I
+X A2 3 -400 -100 100 R 50 50 1 1 I
+X GND 4 0 -300 100 U 50 50 1 1 W
+X SDA 5 400 100 100 L 50 50 1 1 B
+X SCL 6 400 0 100 L 50 50 1 1 I
+X WP 7 400 -100 100 L 50 50 1 1 I
+X VCC 8 0 300 100 D 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
 # Regulator_Switching_R-78C5.0-1.0
 #
 DEF Regulator_Switching_R-78C5.0-1.0 U 0 10 Y Y 1 F N

Hardware/oiler SMD.kicad_pro

@@ -0,0 +1,443 @@
+{
+  "board": {
+    "design_settings": {
+      "defaults": {
+        "board_outline_line_width": 0.049999999999999996,
+        "copper_line_width": 0.19999999999999998,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.049999999999999996,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": false,
+          "text_position": 0,
+          "units_format": 1
+        },
+        "fab_line_width": 0.09999999999999999,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.09999999999999999,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.762,
+          "height": 1.524,
+          "width": 1.524
+        },
+        "silk_line_width": 0.12,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.15,
+        "silk_text_upright": false,
+        "zones": {
+          "45_degree_only": false,
+          "min_clearance": 0.19999999999999998
+        }
+      },
+      "diff_pair_dimensions": [],
+      "drc_exclusions": [],
+      "meta": {
+        "filename": "board_design_settings.json",
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "copper_edge_clearance": "error",
+        "courtyards_overlap": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint_type_mismatch": "error",
+        "hole_clearance": "error",
+        "hole_near_hole": "error",
+        "invalid_outline": "error",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "error",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_dangling": "warning",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zone_has_empty_net": "error",
+        "zones_intersect": "error"
+      },
+      "rule_severitieslegacy_courtyards_overlap": true,
+      "rule_severitieslegacy_no_courtyard_defined": false,
+      "rules": {
+        "allow_blind_buried_vias": false,
+        "allow_microvias": false,
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_copper_edge_clearance": 0.049999999999999996,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.19999999999999998,
+        "min_microvia_drill": 0.09999999999999999,
+        "min_silk_clearance": 0.0,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.19999999999999998,
+        "min_via_annular_width": 0.049999999999999996,
+        "min_via_diameter": 0.39999999999999997,
+        "use_height_for_length_calcs": true
+      },
+      "track_widths": [
+        0.0,
+        0.5,
+        1.0,
+        2.0
+      ],
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        },
+        {
+          "diameter": 0.7,
+          "drill": 0.35
+        },
+        {
+          "diameter": 1.0,
+          "drill": 0.6
+        },
+        {
+          "diameter": 2.0,
+          "drill": 1.0
+        }
+      ],
+      "zones_allow_external_fillets": false,
+      "zones_use_no_outline": true
+    },
+    "layer_presets": []
+  },
+  "boards": [],
+  "cvpcb": {
+    "equivalence_files": []
+  },
+  "erc": {
+    "erc_exclusions": [],
+    "meta": {
+      "version": 0
+    },
+    "pin_map": [
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0,
+        1,
+        2
+      ],
+      [
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        1,
+        1,
+        2,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        2,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2
+      ]
+    ],
+    "rule_severities": {
+      "bus_definition_conflict": "error",
+      "bus_entry_needed": "error",
+      "bus_label_syntax": "error",
+      "bus_to_bus_conflict": "error",
+      "bus_to_net_conflict": "error",
+      "different_unit_footprint": "error",
+      "different_unit_net": "error",
+      "duplicate_reference": "error",
+      "duplicate_sheet_names": "error",
+      "extra_units": "error",
+      "global_label_dangling": "warning",
+      "hier_label_mismatch": "error",
+      "label_dangling": "error",
+      "lib_symbol_issues": "warning",
+      "multiple_net_names": "warning",
+      "net_not_bus_member": "warning",
+      "no_connect_connected": "warning",
+      "no_connect_dangling": "warning",
+      "pin_not_connected": "error",
+      "pin_not_driven": "error",
+      "pin_to_pin": "warning",
+      "power_pin_not_driven": "error",
+      "similar_labels": "warning",
+      "unannotated": "error",
+      "unit_value_mismatch": "error",
+      "unresolved_variable": "error",
+      "wire_dangling": "error"
+    }
+  },
+  "libraries": {
+    "pinned_footprint_libs": [],
+    "pinned_symbol_libs": []
+  },
+  "meta": {
+    "filename": "oiler SMD.kicad_pro",
+    "version": 1
+  },
+  "net_settings": {
+    "classes": [
+      {
+        "bus_width": 12.0,
+        "clearance": 0.2,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Default",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.25,
+        "via_diameter": 0.8,
+        "via_drill": 0.4,
+        "wire_width": 6.0
+      }
+    ],
+    "meta": {
+      "version": 2
+    },
+    "net_colors": null
+  },
+  "pcbnew": {
+    "last_paths": {
+      "gencad": "",
+      "idf": "",
+      "netlist": "Rehoiler SMD.net",
+      "specctra_dsn": "",
+      "step": "",
+      "vrml": ""
+    },
+    "page_layout_descr_file": ""
+  },
+  "schematic": {
+    "annotate_start_num": 0,
+    "drawing": {
+      "default_line_thickness": 6.0,
+      "default_text_size": 50.0,
+      "field_names": [],
+      "intersheets_ref_own_page": false,
+      "intersheets_ref_prefix": "",
+      "intersheets_ref_short": false,
+      "intersheets_ref_show": false,
+      "intersheets_ref_suffix": "",
+      "junction_size_choice": 3,
+      "label_size_ratio": 0.25,
+      "pin_symbol_size": 25.0,
+      "text_offset_ratio": 0.08
+    },
+    "legacy_lib_dir": "",
+    "legacy_lib_list": [],
+    "meta": {
+      "version": 1
+    },
+    "net_format_name": "Pcbnew",
+    "ngspice": {
+      "fix_include_paths": true,
+      "fix_passive_vals": false,
+      "meta": {
+        "version": 0
+      },
+      "model_mode": 0,
+      "workbook_filename": ""
+    },
+    "page_layout_descr_file": "",
+    "plot_directory": "",
+    "spice_adjust_passive_values": false,
+    "spice_external_command": "spice \"%I\"",
+    "subpart_first_id": 65,
+    "subpart_id_separator": 0
+  },
+  "sheets": [
+    [
+      "b1ddb058-f7b2-429c-9489-f4e2242ad7e5",
+      ""
+    ]
+  ],
+  "text_variables": {}
+}

Hardware/oiler SMD.sch

@@ -92,8 +92,6 @@ F 3 "" H 6500 4200 50  0001 C CNN
 $EndComp
 Wire Wire Line
 	6500 4200 6500 3950
-Wire Wire Line
-	8450 3050 8450 3750
 Wire Wire Line
 	8450 3750 8600 3750
 Wire Wire Line
@@ -218,8 +216,9 @@ U 1 1 61D2CD57
 P 8250 4400
 F 0 "D2" V 8296 4320 50  0000 R CNN
 F 1 "BAT42" V 8205 4320 50  0000 R CNN
-F 2 "Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal" H 8250 4225 50  0001 C CNN
+F 2 "Diode_SMD:D_SOD-123" H 8250 4225 50  0001 C CNN
 F 3 "http://www.vishay.com/docs/85660/bat42.pdf" H 8250 4400 50  0001 C CNN
+F 4 "BAT 42" H 8250 4400 50  0001 C CNN "Reichelt Order No."
 	1    8250 4400
 	0    -1   -1   0   
 $EndComp
@@ -239,7 +238,7 @@ Wire Wire Line
 Wire Wire Line
 	8250 4700 8250 4550
 Wire Wire Line
-	8250 4250 8250 3150
+	8250 4250 8250 3350
 $Comp
 L Device:C C1
 U 1 1 61D2F740
@@ -254,23 +253,23 @@ $EndComp
 $Comp
 L Device:C C2
 U 1 1 61D32638
-P 8000 3400
-F 0 "C2" H 8115 3446 50  0000 L CNN
-F 1 "10n" H 8115 3355 50  0000 L CNN
-F 2 "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" H 8038 3250 50  0001 C CNN
-F 3 "~" H 8000 3400 50  0001 C CNN
-	1    8000 3400
+P 8000 3700
+F 0 "C2" H 8115 3746 50  0000 L CNN
+F 1 "10n" H 8115 3655 50  0000 L CNN
+F 2 "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" H 8038 3550 50  0001 C CNN
+F 3 "~" H 8000 3700 50  0001 C CNN
+	1    8000 3700
 	1    0    0    -1  
 $EndComp
 $Comp
 L power:GND #PWR0109
 U 1 1 61D32EB9
-P 8000 3550
-F 0 "#PWR0109" H 8000 3300 50  0001 C CNN
-F 1 "GND" H 8005 3377 50  0000 C CNN
-F 2 "" H 8000 3550 50  0001 C CNN
-F 3 "" H 8000 3550 50  0001 C CNN
-	1    8000 3550
+P 8000 3850
+F 0 "#PWR0109" H 8000 3600 50  0001 C CNN
+F 1 "GND" H 8005 3677 50  0000 C CNN
+F 2 "" H 8000 3850 50  0001 C CNN
+F 3 "" H 8000 3850 50  0001 C CNN
+	1    8000 3850
 	1    0    0    -1  
 $EndComp
 $Comp
@@ -284,32 +283,15 @@ F 3 "" H 7400 3850 50  0001 C CNN
 	1    7400 3850
 	1    0    0    -1  
 $EndComp
-Wire Wire Line
-	6900 3150 8000 3150
-Wire Wire Line
-	6900 3050 8450 3050
-Wire Wire Line
-	7400 3250 7400 3550
-Wire Wire Line
-	8000 3250 8000 3150
-Connection ~ 8000 3150
-Wire Wire Line
-	8000 3150 8250 3150
-Wire Wire Line
-	6900 3250 7400 3250
-Wire Wire Line
-	7400 3250 7750 3250
-Wire Wire Line
-	7750 3250 7750 4250
-Connection ~ 7400 3250
 $Comp
 L Diode:BAT42 D1
 U 1 1 61D35ED1
 P 7750 4400
 F 0 "D1" V 7796 4320 50  0000 R CNN
 F 1 "BAT42" V 7705 4320 50  0000 R CNN
-F 2 "Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal" H 7750 4225 50  0001 C CNN
+F 2 "Diode_SMD:D_SOD-123" H 7750 4225 50  0001 C CNN
 F 3 "http://www.vishay.com/docs/85660/bat42.pdf" H 7750 4400 50  0001 C CNN
+F 4 "BAT 42" H 7750 4400 50  0001 C CNN "Reichelt Order No."
 	1    7750 4400
 	0    -1   -1   0   
 $EndComp
@@ -319,7 +301,7 @@ U 1 1 61D36E68
 P 9100 2750
 F 0 "D3" H 9100 2967 50  0000 C CNN
 F 1 "1N4001" H 9100 2876 50  0000 C CNN
-F 2 "Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal" H 9100 2575 50  0001 C CNN
+F 2 "Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal" H 9100 2575 50  0001 C CNN
 F 3 "http://www.vishay.com/docs/88503/1n4001.pdf" H 9100 2750 50  0001 C CNN
 	1    9100 2750
 	1    0    0    -1  
@@ -338,6 +320,7 @@ F 0 "C3" H 9568 2246 50  0000 L CNN
 F 1 "470µF" H 9568 2155 50  0000 L CNN
 F 2 "Capacitor_SMD:CP_Elec_8x10" H 9488 2050 50  0001 C CNN
 F 3 "~" H 9450 2200 50  0001 C CNN
+F 4 "ECC MZS350ARA471" H 9450 2200 50  0001 C CNN "Reichelt Order No."
 	1    9450 2200
 	1    0    0    -1  
 $EndComp
@@ -363,6 +346,7 @@ F 0 "C4" H 10668 2246 50  0000 L CNN
 F 1 "100µ" H 10668 2155 50  0000 L CNN
 F 2 "Capacitor_SMD:CP_Elec_6.3x7.7" H 10588 2050 50  0001 C CNN
 F 3 "~" H 10550 2200 50  0001 C CNN
+F 4 "ECC HXE250ARA101" H 10550 2200 50  0001 C CNN "Reichelt Order No."
 	1    10550 2200
 	1    0    0    -1  
 $EndComp
@@ -378,8 +362,6 @@ F 3 "" H 10550 2350 50  0001 C CNN
 	1    10550 2350
 	1    0    0    -1  
 $EndComp
-Wire Wire Line
-	7150 3350 6900 3350
 $Comp
 L power:GND #PWR0113
 U 1 1 61D3BF4D
@@ -423,7 +405,7 @@ U 1 1 61D3DFDC
 P 9300 3350
 F 0 "D4" V 9254 3430 50  0000 L CNN
 F 1 "1N4001" V 9345 3430 50  0000 L CNN
-F 2 "Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal" H 9300 3175 50  0001 C CNN
+F 2 "Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal" H 9300 3175 50  0001 C CNN
 F 3 "http://www.vishay.com/docs/88503/1n4001.pdf" H 9300 3350 50  0001 C CNN
 	1    9300 3350
 	0    1    1    0   
@@ -455,8 +437,6 @@ Wire Wire Line
 	7850 5400 7850 5450
 Wire Wire Line
 	7150 5300 7300 5300
-Wire Wire Line
-	7150 3350 7150 5300
 Wire Wire Line
 	7750 4550 7750 5200
 Wire Wire Line
@@ -481,94 +461,238 @@ Wire Wire Line
 $Comp
 L Connector_Generic:Conn_01x04 J5
 U 1 1 61E12B85
-P 7650 2500
-F 0 "J5" H 7730 2492 50  0000 L CNN
-F 1 "I2C" H 7730 2401 50  0000 L CNN
-F 2 "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" H 7650 2500 50  0001 C CNN
-F 3 "~" H 7650 2500 50  0001 C CNN
-	1    7650 2500
+P 8450 2500
+F 0 "J5" H 8530 2492 50  0000 L CNN
+F 1 "I2C" H 8530 2401 50  0000 L CNN
+F 2 "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal" H 8450 2500 50  0001 C CNN
+F 3 "~" H 8450 2500 50  0001 C CNN
+	1    8450 2500
 	1    0    0    -1  
 $EndComp
 $Comp
 L power:+3.3V #PWR0116
 U 1 1 61E137AF
-P 7250 1550
-F 0 "#PWR0116" H 7250 1400 50  0001 C CNN
-F 1 "+3.3V" H 7265 1723 50  0000 C CNN
-F 2 "" H 7250 1550 50  0001 C CNN
-F 3 "" H 7250 1550 50  0001 C CNN
-	1    7250 1550
+P 8050 1550
+F 0 "#PWR0116" H 8050 1400 50  0001 C CNN
+F 1 "+3.3V" H 8065 1723 50  0000 C CNN
+F 2 "" H 8050 1550 50  0001 C CNN
+F 3 "" H 8050 1550 50  0001 C CNN
+	1    8050 1550
 	1    0    0    -1  
 $EndComp
 $Comp
 L power:GND #PWR0117
 U 1 1 61E147DB
-P 7400 2750
-F 0 "#PWR0117" H 7400 2500 50  0001 C CNN
-F 1 "GND" H 7405 2577 50  0000 C CNN
-F 2 "" H 7400 2750 50  0001 C CNN
-F 3 "" H 7400 2750 50  0001 C CNN
-	1    7400 2750
+P 8200 2750
+F 0 "#PWR0117" H 8200 2500 50  0001 C CNN
+F 1 "GND" H 8205 2577 50  0000 C CNN
+F 2 "" H 8200 2750 50  0001 C CNN
+F 3 "" H 8200 2750 50  0001 C CNN
+	1    8200 2750
 	1    0    0    -1  
 $EndComp
 Wire Wire Line
-	7450 2700 7400 2700
+	8250 2700 8200 2700
 Wire Wire Line
-	7400 2700 7400 2750
+	8200 2700 8200 2750
 Wire Wire Line
-	6900 2950 7250 2950
+	8050 2950 8050 2400
 Wire Wire Line
-	7250 2950 7250 2400
+	8050 2400 8250 2400
 Wire Wire Line
-	7250 2400 7450 2400
+	7950 2850 7950 2500
 Wire Wire Line
-	6900 2850 7150 2850
-Wire Wire Line
-	7150 2850 7150 2500
-Wire Wire Line
-	7150 2500 7450 2500
+	7950 2500 8250 2500
 $Comp
 L Device:R R4
 U 1 1 61E189A2
-P 7150 1850
-F 0 "R4" H 7080 1804 50  0000 R CNN
-F 1 "4k7" H 7080 1895 50  0000 R CNN
-F 2 "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" V 7080 1850 50  0001 C CNN
-F 3 "~" H 7150 1850 50  0001 C CNN
-	1    7150 1850
+P 7950 1850
+F 0 "R4" H 7880 1804 50  0000 R CNN
+F 1 "4k7" H 7880 1895 50  0000 R CNN
+F 2 "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" V 7880 1850 50  0001 C CNN
+F 3 "~" H 7950 1850 50  0001 C CNN
+	1    7950 1850
 	-1   0    0    1   
 $EndComp
 $Comp
 L Device:R R5
 U 1 1 61E1955B
-P 7250 2150
-F 0 "R5" H 7180 2104 50  0000 R CNN
-F 1 "4k7" H 7180 2195 50  0000 R CNN
-F 2 "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" V 7180 2150 50  0001 C CNN
-F 3 "~" H 7250 2150 50  0001 C CNN
-	1    7250 2150
+P 8050 2150
+F 0 "R5" H 7980 2104 50  0000 R CNN
+F 1 "4k7" H 7980 2195 50  0000 R CNN
+F 2 "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" V 7980 2150 50  0001 C CNN
+F 3 "~" H 8050 2150 50  0001 C CNN
+	1    8050 2150
 	-1   0    0    1   
 $EndComp
 Wire Wire Line
-	7450 2600 7050 2600
+	8250 2600 7850 2600
 Wire Wire Line
-	7050 2600 7050 1600
+	7850 2600 7850 1600
 Wire Wire Line
-	7050 1600 7150 1600
+	7850 1600 7950 1600
 Wire Wire Line
-	7250 1600 7250 1550
-Connection ~ 7150 1600
+	8050 1600 8050 1550
+Connection ~ 7950 1600
 Wire Wire Line
-	7150 1600 7250 1600
+	7950 1600 8050 1600
 Wire Wire Line
-	7250 2000 7250 1600
-Connection ~ 7250 1600
+	8050 2000 8050 1600
+Connection ~ 8050 1600
 Wire Wire Line
-	7150 1600 7150 1700
+	7950 1600 7950 1700
 Wire Wire Line
-	7250 2300 7250 2400
-Connection ~ 7250 2400
+	8050 2300 8050 2400
+Connection ~ 8050 2400
 Wire Wire Line
-	7150 2000 7150 2500
-Connection ~ 7150 2500
+	7950 2000 7950 2500
+Connection ~ 7950 2500
+Wire Wire Line
+	6900 3550 7150 3550
+Wire Wire Line
+	7150 3550 7150 5300
+Wire Wire Line
+	6900 3450 7400 3450
+Connection ~ 7400 3450
+Wire Wire Line
+	7400 3450 7400 3550
+Wire Wire Line
+	7400 3450 7750 3450
+Wire Wire Line
+	7750 3450 7750 4250
+Wire Wire Line
+	6900 3350 8000 3350
+Wire Wire Line
+	8000 3350 8000 3550
+Wire Wire Line
+	8000 3350 8250 3350
+Connection ~ 8000 3350
+Wire Wire Line
+	8450 3250 8450 3750
+Wire Wire Line
+	6900 3250 8450 3250
+$Comp
+L Memory_EEPROM:24LC64 U3
+U 1 1 61DDD4E7
+P 6750 1550
+F 0 "U3" H 6750 2031 50  0000 C CNN
+F 1 "24LC64" H 6750 1940 50  0000 C CNN
+F 2 "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" H 6750 1550 50  0001 C CNN
+F 3 "http://ww1.microchip.com/downloads/en/DeviceDoc/21189f.pdf" H 6750 1550 50  0001 C CNN
+	1    6750 1550
+	1    0    0    -1  
+$EndComp
+$Comp
+L power:+3.3V #PWR0118
+U 1 1 61DDE198
+P 6750 1250
+F 0 "#PWR0118" H 6750 1100 50  0001 C CNN
+F 1 "+3.3V" H 6765 1423 50  0000 C CNN
+F 2 "" H 6750 1250 50  0001 C CNN
+F 3 "" H 6750 1250 50  0001 C CNN
+	1    6750 1250
+	1    0    0    -1  
+$EndComp
+$Comp
+L power:GND #PWR0119
+U 1 1 61DDE4C0
+P 6750 1850
+F 0 "#PWR0119" H 6750 1600 50  0001 C CNN
+F 1 "GND" H 6755 1677 50  0000 C CNN
+F 2 "" H 6750 1850 50  0001 C CNN
+F 3 "" H 6750 1850 50  0001 C CNN
+	1    6750 1850
+	1    0    0    -1  
+$EndComp
+$Comp
+L power:GND #PWR0120
+U 1 1 61DDE71F
+P 6300 1850
+F 0 "#PWR0120" H 6300 1600 50  0001 C CNN
+F 1 "GND" H 6305 1677 50  0000 C CNN
+F 2 "" H 6300 1850 50  0001 C CNN
+F 3 "" H 6300 1850 50  0001 C CNN
+	1    6300 1850
+	1    0    0    -1  
+$EndComp
+Wire Wire Line
+	6350 1650 6300 1650
+Wire Wire Line
+	6300 1650 6300 1850
+Wire Wire Line
+	6350 1450 6300 1450
+Wire Wire Line
+	6300 1450 6300 1550
+Connection ~ 6300 1650
+Wire Wire Line
+	6350 1550 6300 1550
+Connection ~ 6300 1550
+Wire Wire Line
+	6300 1550 6300 1650
+Wire Wire Line
+	6900 2850 7400 2850
+Wire Wire Line
+	6900 2950 7500 2950
+Wire Wire Line
+	7150 1550 7400 1550
+Wire Wire Line
+	7400 1550 7400 2850
+Connection ~ 7400 2850
+Wire Wire Line
+	7400 2850 7950 2850
+Wire Wire Line
+	7500 1450 7500 2950
+Wire Wire Line
+	7150 1450 7500 1450
+Connection ~ 7500 2950
+Wire Wire Line
+	7500 2950 8050 2950
+$Comp
+L power:GND #PWR0121
+U 1 1 61DFBD18
+P 7250 1850
+F 0 "#PWR0121" H 7250 1600 50  0001 C CNN
+F 1 "GND" H 7255 1677 50  0000 C CNN
+F 2 "" H 7250 1850 50  0001 C CNN
+F 3 "" H 7250 1850 50  0001 C CNN
+	1    7250 1850
+	1    0    0    -1  
+$EndComp
+Wire Wire Line
+	7150 1650 7250 1650
+Wire Wire Line
+	7250 1650 7250 1850
+$Comp
+L power:GND #PWR0122
+U 1 1 61DEAC05
+P 6000 1700
+F 0 "#PWR0122" H 6000 1450 50  0001 C CNN
+F 1 "GND" H 6005 1527 50  0000 C CNN
+F 2 "" H 6000 1700 50  0001 C CNN
+F 3 "" H 6000 1700 50  0001 C CNN
+	1    6000 1700
+	1    0    0    -1  
+$EndComp
+$Comp
+L Device:C C5
+U 1 1 61DEA081
+P 6000 1550
+F 0 "C5" H 6115 1596 50  0000 L CNN
+F 1 "10n" H 6115 1505 50  0000 L CNN
+F 2 "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" H 6038 1400 50  0001 C CNN
+F 3 "~" H 6000 1550 50  0001 C CNN
+	1    6000 1550
+	1    0    0    -1  
+$EndComp
+$Comp
+L power:+3.3V #PWR0123
+U 1 1 61DEAFE2
+P 6000 1400
+F 0 "#PWR0123" H 6000 1250 50  0001 C CNN
+F 1 "+3.3V" H 6015 1573 50  0000 C CNN
+F 2 "" H 6000 1400 50  0001 C CNN
+F 3 "" H 6000 1400 50  0001 C CNN
+	1    6000 1400
+	1    0    0    -1  
+$EndComp
 $EndSCHEMATC

Software/.gitignore

@@ -0,0 +1,7 @@
+data/
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch
+wifi_credentials.ini

Software/.vscode/extensions.json

@@ -0,0 +1,10 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
+}

Software/data_src/index.htm

@@ -0,0 +1,624 @@
+<!DOCTYPE html>
+<html>
+
+<head>
+  <meta charset="utf-8" />
+  <title>KTM CAN Chain Oiler</title>
+  <meta name="viewport" content="width=device-width, initial-scale=1">
+  <link rel="stylesheet" href="static/css/bootstrap.min.css">
+  <link rel="stylesheet" href="static/css/custom.css">
+  <link rel="stylesheet" href="static/css/tweaks.css">
+  <script src="static/js/jquery.min.js"></script>
+  <script src="static/js/bootstrap.min.js"></script>
+  <link rel="apple-touch-icon" sizes="180x180" href="static/img/apple-touch-icon.png">
+  <link rel="icon" type="image/png" sizes="32x32" href="static/img/favicon-32x32.png">
+  <link rel="icon" type="image/png" sizes="16x16" href="static/img/favicon-16x16.png">
+  <link rel="manifest" href="static/img/site.webmanifest">
+</head>
+
+<body>
+
+  <nav class="navbar fixed-top navbar-dark bg-primary" id="navbar1">
+    <a class="navbar-brand" href="#">
+      <img src="static/img/logo.png" width="30" height="30" class="d-inline-block align-top mr-1" alt="">
+      KTM CAN ChainLube
+    </a>
+    <button class="navbar-toggler" type="button" data-toggle="collapse" data-target="#collapsingNavbar"
+      aria-controls="collapsingNavbar" aria-expanded="false" aria-label="Toggle navigation">
+      <span class="navbar-toggler-icon"></span>
+    </button>
+
+    <div class="collapse navbar-collapse" id="collapsingNavbar">
+      <ul class="navbar-nav nav mr-auto mt-2 mt-lg-0">
+
+        <li class="nav-item"><a class="nav-link active" role="tab" data-toggle="tab" href="#tab_home">Home</a></li>
+        <li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_source">Wegstrecke</a></li>
+        <li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_lube">Schmierung</a></li>
+        <li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_maintenance">Wartung</a></li>
+        <li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_sysinfo">Systeminfo</a></li>
+        <li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_fwupdate">Update</a></li>
+
+      </ul>
+    </div>
+  </nav>
+
+  <main class="container">
+
+    <!-- Tabs Content -->
+    <div class="tab-content">
+      <!-- Div Tab Home-->
+      <div id="tab_home" class="tab-pane fade show active" role="tabpanel">
+        <div class="col text-center">
+          <div class="jumbotron">
+            <img src="static/img/logo.png" width="120" height="120" class="img-fluid" alt="">
+            <h3 class="pt-3">KTM CAN Chain Lube</h3>
+          </div>
+        </div>
+        <hr />
+        <p>
+        <h4>Tankinhalt verbleibend</h4>
+        <div class="progress">
+          <div class="progress-bar" role="progressbar" aria-valuenow="%TANK_REMAIN_CAPACITY%" aria-valuemin="0"
+            aria-valuemax="100" style="width: %TANK_REMAIN_CAPACITY%&#37;">
+            %TANK_REMAIN_CAPACITY%&#37;
+          </div>
+        </div>
+        </p>
+        <hr />
+        <p>
+        <h4>aktueller Modus</h4>
+        <input class="form-control" type="text" placeholder="%SYSTEM_STATUS%" readonly>
+        </p>
+        <hr />
+        <div %SHOW_DTC_TABLE%>
+          <p>
+          <h4>Fehlercodes</h4>
+          <table class="table">
+            <tbody>
+              <tr>
+                <th class="col-md-3" scope="col">Zeitstempel</th>
+                <th class="col-md-3" scope="col">Fehlercode</th>
+                <th class="col-md-3" scope="col">Schwere</th>
+                <th class="col-md-3" scope="col">Aktiv</th>
+              </tr>
+              %DTC_TABLE%
+            </tbody>
+          </table>
+          </p>
+          <hr />
+        </div>
+      </div>
+      <!-- Div Tab Home-->
+      <!-- Div Tab Source Settings-->
+      <div id="tab_source" class="tab-pane fade" role="tabpanel">
+        <h3>Wegstreckenerfassung</h3>
+        <hr />
+        <p>
+        <h4>Signalquelle</h4>
+        <form action="post.htm" method="POST" class="form-horizontal">
+          <div class="form-group row">
+            <label for="sourceselect" class="control-label col-4">Schnittstelle</label>
+            <div class="col-8">
+              <select id="sourceselect" name="sourceselect" class="select form-control">
+                %SOURCE_SELECT_OPTIONS%
+              </select>
+            </div>
+          </div>
+          <div class="alert alert-primary alert-dismissable show fade" role="alert">
+            <button type="button" class="close" data-dismiss="alert" aria-label="Close">
+              <span aria-hidden="true">×</span>
+            </button>
+            <strong>Achtung!</strong><br>
+            Bei Änderung der Signalquelle wird der CAN-Oiler neu gestartet.
+            Dadurch wird die WiFi-Verbindung getrennt und muss neu aufgebaut werden.
+          </div>
+          <div class="form-group row">
+            <div class="offset-4 col-8">
+              <button name="sourcesave" type="submit" class="btn btn-outline-primary">&Uuml;bernehmen</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <!-- Div Source:Impulse Settings-->
+        <div %SHOW_IMPULSE_SETTINGS%>
+          <hr />
+          <p>
+          <h4>Einstellungen Impulseingang</h4>
+          <form action="post.htm" method="POST" class="form-horizontal">
+
+            <div class="form-group row">
+              <label for="tirewidth" class="control-label col-4">Reifenbreite</label>
+              <div class="col-8">
+                <div class="input-group">
+                  <input id="tirewidth" name="tirewidth" type="text" required="required" class="form-control"
+                    value="%TIRE_WIDTH_MM%">
+                  <div class="input-group-append">
+                    <span class="input-group-text">mm</span>
+                  </div>
+                </div>
+              </div>
+            </div>
+
+            <div class="form-group row">
+              <label for="tireratio" class="control-label col-4">Höhe/Breite-Verhältniss</label>
+              <div class="col-8">
+                <div class="input-group">
+                  <input id="tireratio" name="tireratio" type="text" required="required" class="form-control"
+                    value="%TIRE_RATIO%">
+                  <div class="input-group-append">
+                    <span class="input-group-text">mm</span>
+                  </div>
+                </div>
+              </div>
+            </div>
+            <div class="form-group row">
+              <label for="tiredia" class="control-label col-4">Felgendurchmesser</label>
+              <div class="col-8">
+                <div class="input-group">
+                  <input id="tiredia" name="tiredia" type="text" required="required" class="form-control"
+                    value="%RIM_DIAMETER%">
+                  <div class="input-group-append">
+                    <span class="input-group-text">"</span>
+                  </div>
+                </div>
+              </div>
+            </div>
+            <div class="form-group row">
+              <label for="pulserev" class="control-label col-4">Pulse pro Umdrehung</label>
+              <div class="col-8">
+                <div class="input-group">
+                  <input id="pulserev" name="pulserev" type="text" required="required" class="form-control"
+                    value="%PULSE_PER_REV%">
+                  <div class="input-group-addon"></div>
+                </div>
+              </div>
+            </div>
+            <div class="form-group row">
+              <div class="offset-4 col-8">
+                <button name="pulsesave" type="submit" class="btn btn-outline-primary">Speichern</button>
+              </div>
+            </div>
+          </form>
+          </p>
+        </div>
+        <!-- Div Source:Impulse Settings-->
+        <!-- Div Source:CAN Settings-->
+        <div %SHOW_CAN_SETTINGS%>
+          <hr />
+          <p>
+          <h4>Einstellungen CAN-Bus</h4>
+          <form action="post.htm" method="POST" class="form-horizontal">
+            <div class="form-group row">
+              <label for="cansource" class="control-label col-4">Model</label>
+              <div class="col-8">
+                <select id="cansource" name="cansource" class="select form-control">
+                  %CANSOURCE_SELECT_OPTIONS%
+                </select>
+              </div>
+            </div>
+            <div class="form-group row">
+              <div class="offset-4 col-8">
+                <button name="cansave" type="submit" class="btn btn-outline-primary">Speichern</button>
+              </div>
+            </div>
+          </form>
+          </p>
+        </div>
+        <!-- Div Source:CAN Settings-->
+        <!-- Div Source:GPS Settings-->
+        <div %SHOW_GPS_SETTINGS%>
+          <hr />
+          <p>
+          <h4>Einstellungen GPS</h4>
+          <form action="post.htm" method="POST" class="form-horizontal">
+            <div class="form-group row">
+              <label for="gpsbaud" class="control-label col-4">Baudrate</label>
+              <div class="col-8">
+                <select id="gpsbaud" name="gpsbaud" class="select form-control">
+                  %GPSBAUD_SELECT_OPTIONS%
+                </select>
+              </div>
+            </div>
+            <div class="form-group row">
+              <div class="offset-4 col-8">
+                <button name="gpssave" type="submit" class="btn btn-outline-primary">Speichern</button>
+              </div>
+            </div>
+          </form>
+          </p>
+        </div>
+        <!-- Div Source:GPS Settings-->
+      </div>
+      <!-- Div Tab Source Settings-->
+      <!-- Div Tab Lube -->
+      <div id="tab_lube" class="tab-pane fade" role="tabpanel">
+        <h3>Schmierung</h3>
+        <hr />
+        <h4>Dosierung</h4>
+        <p>
+        <form action="post.htm" method="POST" class="form-horizontal">
+          <div class="form-group row">
+            <label for="lubedistancenormal" class="control-label col-4">Normal (gr&uuml;n)</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="lubedistancenormal" name="lubedistancenormal" value="%LUBE_DISTANCE_NORMAL%" type="text"
+                  class="form-control" required="required">
+                <div class="input-group-append">
+                  <span class="input-group-text">m</span>
+                </div>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <label for="lubedistancerain" class="control-label col-4">Regen (blau)</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="lubedistancerain" name="lubedistancerain" value="%LUBE_DISTANCE_RAIN%" type="text"
+                  class="form-control" required="required">
+                <div class="input-group-append">
+                  <span class="input-group-text">m</span>
+                </div>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <div class="offset-4 col-8">
+              <button name="oilsave" type="submit" class="btn btn-outline-primary">Speichern</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <hr />
+      </div>
+      <!-- Div Tab Lube -->
+      <!-- Div Tab Maintenance -->
+      <div id="tab_maintenance" class="tab-pane fade" role="tabpanel">
+        <h3>Wartung</h3>
+        <hr />
+        <p>
+        <h4>&Ouml;lvorrat</h4>
+        <form action="post.htm" method="POST" class="form-horizontal">
+          <div class="form-group row">
+            <label for="tankcap" class="control-label col-4">Tankkapazität</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="tankcap" name="tankcap" value="%TANK_CAPACITY%" type="text" class="form-control"
+                  required="required">
+                <div class="input-group-append">
+                  <span class="input-group-text">ml</span>
+                </div>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <label for="tankwarn" class="control-label col-4">Leer-Warnung</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="tankwarn" name="tankwarn" value="%TANK_REMIND%" type="text" class="form-control"
+                  required="required">
+                <div class="input-group-append">
+                  <span class="input-group-text">&#37;</span>
+                </div>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <label for="pumppulse" class="control-label col-4">Menge pro Puls</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="pumppulse" name="pumppulse" value="%AMOUNT_PER_DOSE%" type="text" class="form-control"
+                  required="required">
+                <div class="input-group-append">
+                  <span class="input-group-text">µl</span>
+                </div>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <label for="tankremain_maint" class="control-label col-4">Tankinhalt verbleibend</label>
+            <div class="col-8">
+              <div class="progress">
+                <div id="tankremain_maint" class="progress-bar" role="progressbar"
+                  aria-valuenow="%TANK_REMAIN_CAPACITY%" aria-valuemin="0" aria-valuemax="100"
+                  style="width: %TANK_REMAIN_CAPACITY%&#37;">
+                  %TANK_REMAIN_CAPACITY%&#37;
+                </div>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <div class="offset-4 col-8 row">
+              <button name="oilsave" type="submit" class="btn btn-outline-primary">Speichern</button>
+              <button name="resettank" type="submit" class="btn btn-outline-primary ml-2">Tank zurücksetzen</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <hr />
+        <p>
+        <h4>Entl&uuml;ftung</h4>
+        <form action="post.htm" method="POST" class="form-horizontal">
+          <div class="form-group row">
+            <label for="purgepulse" class="control-label col-4">Entl&uuml;ftung Dosierung</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="purgepulse" name="purgepulse" value="%BLEEDING_PULSES%" type="text" class="form-control">
+                <div class="input-group-append">
+                  <span class="input-group-text">Pulse</span>
+                </div>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <div class="offset-4 col-8 row">
+              <button name="maintsave" type="submit" class="btn btn-outline-primary">Speichern</button>
+              <button name="purgenow" type="submit" class="btn btn-outline-primary ml-2">Entlüftung starten</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <hr />
+        <h4>EEPROM formatieren</h4>
+        <p>
+        <div class="alert alert-primary alert-dismissable show fade" role="alert">
+          <button type="button" class="close" data-dismiss="alert" aria-label="Close">
+            <span aria-hidden="true">×</span>
+          </button>
+          <strong>Achtung!</strong><br>
+          Das Formatieren der EEPROM-Bereiche sollte nur ausgeführt werden wenn es unbedingt erforderlich ist!
+          Hierdurch werden alle Einstellungen zurück gesetzt bzw. alle Betriebsdaten gehen verloren.
+          Folgende Situationen erfordern unter anderem eine Formatierung:
+          - Erstinitialisierung (bei neu aufgebautem Gerät)
+          - Firmware-Update (nur wenn es die Release-Notes fordern)
+        </div>
+        <form action="post.htm" method="POST" class="form-horizontal">
+          <div class="form-group row">
+            <div class="offset-4 col-8">
+              <div class="form-check">
+                <input class="form-check-input" type="checkbox" name="reset_ee_cfg" id="reset_ee_cfg">
+                <label class="form-check-label" for="reset_ee_cfg">
+                  Bereich "CFG"
+                </label>
+              </div>
+              <div class="form-check">
+                <input class="form-check-input" type="checkbox" name="reset_ee_pds" id="reset_ee_pds">
+                <label class="form-check-label" for="reset_ee_pds">
+                  Bereich "PDS"
+                </label>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <div class="offset-4 col-8">
+              <button name="reset_ee_btn" type="submit" class="btn btn-outline-primary">EEPROM formatieren</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <hr />
+      </div>
+      <!-- Div Tab Maintenance -->
+      <!-- Div Tab SystemInfo -->
+      <div id="tab_sysinfo" class="tab-pane fade" role="tabpanel">
+        <h3>Systeminfo</h3>
+        <hr />
+        <h4>Einstellungen</h4>
+        <p>
+        <table class="table">
+          <tbody>
+            <tr>
+              <th class="col-md-8" scope="col">Parameter</td>
+              <th class="col-md-4" scope="col">Value</td>
+            </tr>
+            <tr>
+              <td>DistancePerLube_Default</td>
+              <td>%LUBE_DISTANCE_NORMAL%</td>
+            </tr>
+            <tr>
+              <td>DistancePerLube_Rain</td>
+              <td>%LUBE_DISTANCE_RAIN%</td>
+            </tr>
+            <tr>
+              <td>tankCapacity_ml</td>
+              <td>%TANK_CAPACITY%</td>
+            </tr>
+            <tr>
+              <td>amountPerDose_&micro;l</td>
+              <td>%AMOUNT_PER_DOSE%</td>
+            </tr>
+            <tr>
+              <td>TankRemindAtPercentage</td>
+              <td>%TANK_REMIND%</td>
+            </tr>
+            <tr>
+              <td>PulsePerRevolution</td>
+              <td>%PULSE_PER_REV%</td>
+            </tr>
+            <tr>
+              <td>TireWidth_mm</td>
+              <td>%TIRE_WIDTH_MM%</td>
+            </tr>
+            <tr>
+              <td>TireWidthHeight_Ratio</td>
+              <td>%TIRE_RATIO%</td>
+            </tr>
+            <tr>
+              <td>RimDiameter_Inch</td>
+              <td>%RIM_DIAMETER%</td>
+            </tr>
+            <tr>
+              <td>DistancePerRevolution_mm</td>
+              <td>%DISTANCE_PER_REV%</td>
+            </tr>
+            <tr>
+              <td>BleedingPulses</td>
+              <td>%BLEEDING_PULSES%</td>
+            </tr>
+            <tr>
+              <td>SpeedSource</td>
+              <td>%SPEED_SOURCE%</td>
+            </tr>
+            <tr>
+              <td>GPSBaudRate</td>
+              <td>%GPS_BAUD%</td>
+            </tr>
+            <tr>
+              <td>CANSource</td>
+              <td>%CAN_SOURCE%</td>
+            </tr>
+            <tr>
+              <td>Checksum</td>
+              <td>%CONFIG_CHECKSUM%</td>
+            </tr>
+          </tbody>
+        </table>
+        </p>
+        <h4>Betriebsdaten</h4>
+        <p>
+        <table class="table">
+          <tbody>
+            <tr>
+              <th class="col-md-8" scope="col">Parameter</td>
+              <th class="col-md-4" scope="col">Value</td>
+            </tr>
+            <tr>
+              <td>writeCycleCounter</td>
+              <td>%WRITE_CYCLE_COUNT%</td>
+            </tr>
+            <tr>
+              <td>PersistenceMarker</td>
+              <td>%PERSISTENCE_MARKER%</td>
+            </tr>
+            <tr>
+              <td>tankRemain_µl</td>
+              <td>%TANK_REMAIN_UL%</td>
+            </tr>
+            <tr>
+              <td>TravelDistance_highRes</td>
+              <td>%TRAVEL_DISTANCE_HIGHRES%</td>
+            </tr>
+            <tr>
+              <td>Odometer</td>
+              <td>%ODOMETER%,%ODOMETER_M%</td>
+            </tr>
+            <tr>
+              <td>checksum</td>
+              <td>%PERSISTANCE_CHECKSUM%</td>
+            </tr>
+        </table>
+        </p>
+      </div>
+      <!-- Div Tab SystemInfo -->
+      <!-- Div Tab Firmware Update-->
+      <div id="tab_fwupdate" class="tab-pane fade" role="tabpanel">
+        <h3>Firmware</h3>
+        <hr />
+        <p>
+        <h4>Version-Info</h4>
+        <table class="table">
+          <tbody>
+            <tr>
+              <td>Firmware Version</td>
+              <td>%SW_VERSION%</td>
+            </tr>
+            <tr>
+              <td>Flash Version</td>
+              <td>%FS_VERSION%</td>
+            </tr>
+        </table>
+        </p>
+        <hr />
+        <p>
+        <h4>Firmware-Update</h4>
+        <form method='POST' action='doUpdate' enctype='multipart/form-data'>
+          <div class="form-group row">
+            <div class="custom-file">
+              <input type="file" name="fw-update-file" class="custom-file-input" id="fw-update-file"
+                accept=".fw.bin,.fs.gz" required />
+              <label class="custom-file-label" for="fw-update-file">Firmware-Update ausw&auml;hlen</label>
+            </div>
+          </div>
+          <div class="form-group row">
+            <button name="submit" type="submit" class="btn btn-outline-primary">Update starten</button>
+          </div>
+        </form>
+        </p>
+      </div>
+      <!-- Div Tab Firmware Update-->
+    </div>
+    <!-- Tabs Content -->
+  </main>
+
+  <!-- Footer -->
+
+  <footer class="page-footer navbar-dark bg-primary font-small fixed-bottom">
+    <div class="container-fluid text-center">
+      <div class="footer-copyright text-center py-3">
+        <span class="text-muted">© 2022 -
+          <a class="text-reset fw-bold" href="https://eventronics.de/">Marcel Peterkau</a></span>
+      </div>
+    </div>
+  </footer>
+
+  <!-- Footer -->
+
+  <!-- Modal Dialog -->
+
+  <div class="modal fade" id="dtcModal" tabindex="-1" role="dialog" aria-labelledby="dtcModalLabel" aria-hidden="true">
+    <div class="modal-dialog modal-dialog-centered" role="document">
+      <div class="modal-content">
+        <div class="modal-header">
+          <h5 class="modal-title" id="dtcModalLabel">DTC-Description</h5>
+          <button type="button" class="close" data-dismiss="modal" aria-label="Close">
+            <span aria-hidden="true">&times;</span>
+          </button>
+        </div>
+        <div class="modal-body">
+          <p class="dtc-desc">DTC Description</p>
+        </div>
+        <div class="modal-footer">
+          <button type="button" class="btn btn-outline-secondary" data-dismiss="modal">Close</button>
+        </div>
+      </div>
+    </div>
+  </div>
+
+  <!-- Modal Dialog -->
+
+  <script>
+    $('.navbar-nav>li>a').on('click', function () {
+      $('.navbar-collapse').collapse('hide');
+    });
+
+    document.querySelector('.custom-file-input').addEventListener('change', function (e) {
+      var fileName = document.getElementById("fw-update-file").files[0].name;
+      var nextSibling = e.target.nextElementSibling
+      nextSibling.innerText = fileName
+    });
+
+    $(document).ready(function () {
+      $("tr[data-dtc]").each(function (i) {
+        $(this).attr('data-toggle', "modal");
+        $(this).attr('data-target', "#dtcModal");
+      });
+    });
+
+    $('#dtcModal').on('show.bs.modal', function (event) {
+      var dtctr = $(event.relatedTarget)
+      var dtc = dtctr.data('dtc')
+      var modal = $(this)
+      $.getJSON('static/tt_dtc/dtc_' + dtc + '.json', function (data) {
+        modal.find('.modal-title').text(data.title)
+        modal.find('.dtc-desc').text(data.description)
+      }).fail(function () {
+        console.log("An error has occurred.");
+        modal.find('.modal-title').text("Fehler")
+        modal.find('.dtc-desc').text("DTC-Beschreibung konnte nicht geladen werden")
+      });
+    });
+
+  </script>
+
+</body>
+
+</html>

Software/data_src/post.htm

@@ -0,0 +1,28 @@
+<!DOCTYPE html>
+<html>
+
+<head>
+  <meta charset="utf-8" />
+  <title>KTM CAN Chain Oiler</title>
+  <meta http-equiv="content-type" content="text/html;charset=UTF-8">
+  <meta name="viewport" content="width=device-width, initial-scale=1">
+  <link rel="stylesheet" href="static/css/bootstrap.min.css">
+  <link rel="stylesheet" href="static/css/custom.css">
+  <script src="static/js/jquery.min.js"></script>
+  <script src="static/js/bootstrap.min.js"></script>
+  <link rel="apple-touch-icon" sizes="180x180" href="static/img/apple-touch-icon.png">
+  <link rel="icon" type="image/png" sizes="32x32" href="static/img/favicon-32x32.png">
+  <link rel="icon" type="image/png" sizes="16x16" href="static/img/favicon-16x16.png">
+  <link rel="manifest" href="static/img/site.webmanifest">
+  <meta http-equiv="refresh" content="3; url='index.htm'" />
+</head>
+
+<body>
+  <div class="container" style="display: flex; justify-content: center; align-items: center; height: 100vh">
+    <div class="alert alert-success">
+      <strong>Bitte warten!</strong> Änderungen werden übernommen.
+    </div>
+  </div>
+</body>
+
+</html>

Software/data_src/static/css/tweaks.css

@@ -0,0 +1,20 @@
+@font-face {
+    font-family: 'Comfortaa';
+    font-style: normal;
+    font-weight: 300;
+    src: url(../fonts/comfortaa.woff2) format('woff2');
+    unicode-range: U+0000-00FF, U+0131, U+0152-0153, U+02BB-02BC, U+02C6, U+02DA, U+02DC, U+2000-206F, U+2074, U+20AC, U+2122, U+2191, U+2193, U+2212, U+2215, U+FEFF, U+FFFD;
+  }
+
+body {
+    padding-top: 70px;
+    margin-bottom: 56px;
+}
+
+hr {
+    height: 2px;
+    border-width: 0;
+    color: gray;
+    background-color: gray
+}
+

Software/data_src/static/img/site.webmanifest

@@ -0,0 +1 @@
+{"name":"","short_name":"","icons":[{"src":"/static/img/android-chrome-192x192.png","sizes":"192x192","type":"image/png"},{"src":"/static/img/android-chrome-512x512.png","sizes":"512x512","type":"image/png"}],"theme_color":"#ffffff","background_color":"#ffffff","display":"standalone"}

Software/data_src/static/tt_dtc/dtc_1.json

@@ -0,0 +1,4 @@
+{
+    "title": "Ölvorrat leer",
+    "description": "Ölvorrat ist komplett leer. Den Ölvorrat auffüllen und im Menu 'Wartung' zurück setzen"
+}

Software/data_src/static/tt_dtc/dtc_10.json

@@ -0,0 +1,4 @@
+{
+    "title": "Keine GPS-Verbindung",
+    "description": "Es wurde kein GPS-Signal über die serielle Schnittstelle empfangen, Prüfen sie die Verbindung und das GPS-Modul"
+}

Software/data_src/static/tt_dtc/dtc_11.json

@@ -0,0 +1,4 @@
+{
+    "title": "CAN-Transceiver Error",
+    "description": "Es konnte keine Verbindung zum CAN-Transceiver hergestellt werden. Prüfen Sie die Hardware auf Defekte"
+}

Software/data_src/static/tt_dtc/dtc_12.json

@@ -0,0 +1,4 @@
+{
+    "title": "Keine CAN-Verbindung",
+    "description": "Es konnte kein CAN-Signal empfangen werden. Prüfen sie die Verbindung und die Einstellungen"
+}

Software/data_src/static/tt_dtc/dtc_2.json

@@ -0,0 +1,4 @@
+{
+    "title": "Ölvorrat niedrig",
+    "description": "Ölvorrat ist unter der Warnschwelle. Den Ölvorrat demnächst auffüllen und im Menu 'Wartung' zurück setzen"
+}

Software/data_src/static/tt_dtc/dtc_3.json

@@ -0,0 +1,4 @@
+{
+    "title": "kein EEPROM gefunden",
+    "description": "Es wurde kein EEPROM gefunden. Dies lässt einen Hardware-Defekt vermuten."
+}

Software/data_src/static/tt_dtc/dtc_4.json

@@ -0,0 +1,4 @@
+{
+    "title": "EEPROM CFG Checksumme",
+    "description": "Die Checksumme der Config-Partition des EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'CFG' im Menu 'Wartung' zurück"
+}

Software/data_src/static/tt_dtc/dtc_5.json

@@ -0,0 +1,4 @@
+{
+    "title": "EEPROM PDS Checksumme",
+    "description": "Die Checksumme der Betriebsdaten-Partition des EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'PDS' im Menu 'Wartung' zurück"
+}

Software/data_src/static/tt_dtc/dtc_6.json

@@ -0,0 +1,4 @@
+{
+    "title": "EEPROM PDS Adresse",
+    "description": "Die Adresse der Betriebsdaten-Partition im EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'PDS' im Menu 'Wartung' zurück"
+}

Software/data_src/static/tt_dtc/dtc_7.json

@@ -0,0 +1,4 @@
+{
+    "title": "EEPROM Version falsch",
+    "description": "Die Layout-Version des EEPROM stimmt nicht mit der Firmware-Version überein. Setzen sie den EEPROM-Bereich 'CFG' im Menu 'Wartung' zurück"
+}

Software/data_src/static/tt_dtc/dtc_8.json

@@ -0,0 +1,4 @@
+{
+    "title": "Flashstorage Fehler",
+    "description": "Der Flashstorage konnte nicht initialisiert werden. Aktualisieren sie Flash & Firmware"
+}

Software/data_src/static/tt_dtc/dtc_9.json

@@ -0,0 +1,4 @@
+{
+    "title": "Flashstorage Version falsch",
+    "description": "Die Version des Flashstorage stimmt nicht mit der Firmware-Version überein. Aktualisieren sie den Flash mit der passenden Update-Datei"
+}

Software/data_src/version

@@ -0,0 +1 @@
+1.2

Software/git_rev_macro.py

@@ -0,0 +1,8 @@
+import subprocess
+
+revision = (
+    subprocess.check_output(["git", "rev-parse", "--short=10", "HEAD"])
+    .strip()
+    .decode("utf-8")
+)
+print("-DGIT_REV='\"%s\"'" % revision)

Software/include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

Software/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

Software/platformio.ini

@@ -0,0 +1,61 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[platformio]
+extra_configs =
+  wifi_credentials.ini
+
+[env:d1_mini]
+platform = espressif8266
+board = d1_mini
+framework = arduino
+
+upload_protocol = esptool
+upload_speed = 921600
+;upload_port = ChainLube_DDEFB2
+;upload_protocol = espota
+;upload_flags =  
+;    --auth=${wifi_cred.admin_password}
+
+build_flags =
+  !python git_rev_macro.py
+  -DWIFI_SSID_CLIENT=${wifi_cred.wifi_ssid_client}
+  -DWIFI_PASSWORD_CLIENT=${wifi_cred.wifi_password_client}
+  -DADMIN_PASSWORD=${wifi_cred.admin_password}
+  -DWIFI_AP_PASSWORD=${wifi_cred.wifi_ap_password}
+  -DWIFI_AP_IP_GW=10,0,0,1
+  -DATOMIC_FS_UPDATE
+  -DFEATURE_ENABLE_WIFI_CLIENT
+  -DFEATURE_ENABLE_REMOTE_DEBUG
+  -DFEATURE_ENABLE_OLED
+  -DFEATURE_ENABLE_CAN
+  -DFEATURE_ENABLE_GPS
+  -DPCB_REV=4
+  -DNO_MODE_FLASH
+
+;build_type = debug
+
+board_build.filesystem = littlefs
+extra_scripts = post:prepare_littlefs.py
+
+monitor_filters = esp8266_exception_decoder
+monitor_speed = 115200
+
+board_build.ldscript = eagle.flash.4m1m.ld
+lib_ldf_mode = deep
+lib_deps = 
+    olikraus/U8g2 @ ^2.28.8
+    joaolopesf/RemoteDebug @ ^2.1.2
+    fastled/FastLED @ ^3.5.0
+    sstaub/Ticker @ ^4.2.0
+    coryjfowler/mcp_can @ ^1.5.0
+    robtillaart/I2C_EEPROM @ ^1.5.2
+    mikalhart/TinyGPSPlus @ ^1.0.3
+    me-no-dev/ESP Async WebServer @ ^1.2.3

Software/prepare_littlefs.py

@@ -0,0 +1,116 @@
+# SCRIPT TO GZIP CRITICAL FILES FOR ACCELERATED WEBSERVING
+# see also https://community.platformio.org/t/question-esp32-compress-files-in-data-to-gzip-before-upload-possible-to-spiffs/6274/10
+
+
+import glob
+import shutil
+import gzip
+import os
+Import("env")
+Import("projenv")
+
+
+def gzip_file(src_path, dst_path):
+
+    with open(src_path, 'rb') as src, gzip.open(dst_path, 'wb') as dst:
+        for chunk in iter(lambda: src.read(4096), b""):
+            dst.write(chunk)
+
+
+def getListOfFiles(dirName):
+    # create a list of file and sub directories
+    # names in the given directory
+    listOfFile = os.listdir(dirName)
+    allFiles = list()
+    # Iterate over all the entries
+    for entry in listOfFile:
+        # Create full path
+        fullPath = os.path.join(dirName, entry)
+        # If entry is a directory then get the list of files in this directory
+        if os.path.isdir(fullPath):
+            allFiles = allFiles + getListOfFiles(fullPath)
+        else:
+            allFiles.append(fullPath)
+
+    return allFiles
+
+def remove_prefix(text, prefix):
+    if text.startswith(prefix):
+        return text[len(prefix):]
+    return text  # or whatever
+
+# Compress files from 'data_src/' to 'data/'
+
+
+def gzip_webfiles(source, target, env):
+    # Filetypes to compress
+    filetypes_to_gzip = ['.css', '.png', '.js', '.ico', '.woff2', '.json']
+    print('\nGZIP: Starting gzip-Process for LittleFS-Image...\n')
+    data_src_dir_path = os.path.join(env.get('PROJECT_DIR'), 'data_src')
+    data_dir_path = env.get('PROJECT_DATA_DIR')
+    # check if data and datasrc exist. If the first exists and not the second, it renames it
+    if(os.path.exists(data_dir_path) and not os.path.exists(data_src_dir_path)):
+        print('GZIP: Directory "'+data_dir_path +
+              '" exists, "'+data_src_dir_path+'" is not found.')
+        print('GZIP: Renaming "' + data_dir_path +
+              '" to "' + data_src_dir_path + '"')
+        os.rename(data_dir_path, data_src_dir_path)
+    # Delete the 'data' directory
+    if(os.path.exists(data_dir_path)):
+        print('GZIP: Deleting the "data" directory ' + data_dir_path)
+        shutil.rmtree(data_dir_path)
+    # Recreate empty 'data' directory
+    print('GZIP: Re-creating an empty data directory ' + data_dir_path)
+    os.mkdir(data_dir_path)
+    # Determine the files to compress
+
+    files_to_copy = []
+    files_to_gzip = []
+
+    all_data_src = getListOfFiles(data_src_dir_path)
+    for file in all_data_src:
+        file_name, file_extension = os.path.splitext(file)
+        print(file_name + " has filetype " + file_extension)
+        if file_extension in filetypes_to_gzip:
+            files_to_gzip.append(file)
+        else:
+            filename_subdir = remove_prefix(file, data_src_dir_path)
+            files_to_copy.append(filename_subdir)
+
+    for file in files_to_copy:
+        print('GZIP: Copying file from: ' + data_src_dir_path + file + ' to: ' + data_dir_path + file)
+        os.makedirs(os.path.dirname(data_dir_path + file), exist_ok=True)
+        shutil.copy(data_src_dir_path + file, data_dir_path + file)
+    # Compress and move files
+    
+    was_error = False
+    try:
+        for source_file_path in files_to_gzip:
+            print('GZIP: compressing... ' + source_file_path)
+            filename_subdir = remove_prefix(source_file_path, data_src_dir_path)
+            target_file_path = data_dir_path + filename_subdir
+            os.makedirs(os.path.dirname(target_file_path), exist_ok=True)
+            print('GZIP: Compressed... ' + target_file_path)
+            gzip_file(source_file_path, target_file_path + ".gz")
+    except IOError as e:
+        was_error = True
+        print('GZIP: Failed to compress file: ' + source_file_path)
+        # print( 'GZIP: EXCEPTION... {}'.format( e ) )
+    if was_error:
+        print('GZIP: Failure/Incomplete.\n')
+    else:
+        print('GZIP: Compressed correctly.\n')
+
+    return
+ 
+def gzip_binffiles(source, target, env):
+    littlefsbin = target[0].get_abspath()
+    targetbin = os.path.join(os.path.dirname(littlefsbin), 'filesystem.fs')
+    shutil.copyfile(littlefsbin, targetbin)
+    gzip_file(targetbin, os.path.join(str(targetbin) + '.gz'))
+    os.remove(targetbin)
+    return
+
+# IMPORTANT, this needs to be added to call the routine
+env.AddPreAction('$BUILD_DIR/littlefs.bin', gzip_webfiles)
+env.AddPostAction('$BUILD_DIR/littlefs.bin', gzip_binffiles)

Software/src/can.cpp

@@ -0,0 +1,46 @@
+#ifdef FEATURE_ENABLE_CAN
+#include "can.h"
+
+MCP_CAN CAN0(GPIO_CS_CAN);
+
+void Init_CAN()
+{
+
+    if (CAN0.begin(MCP_STDEXT, CAN_500KBPS, MCP_16MHZ) != CAN_OK)
+        MaintainDTC(DTC_CAN_TRANSCEIVER_FAILED, DTC_CRITICAL, true);
+
+    CAN0.init_Mask(0, 0, 0x07FF0000); // Init first mask...
+    CAN0.init_Mask(1, 0, 0x07FF0000); // Init second mask...
+    CAN0.init_Filt(0, 0, 0x012D0000); // Init first filter...
+
+    CAN0.setMode(MCP_NORMAL);
+}
+
+uint32_t Process_CAN_WheelSpeed()
+{
+#define FACTOR_RWP_KMH_890ADV 18 // Divider to convert Raw Data to km/h
+
+    can_frame canMsg;
+    static uint32_t lastRecTimestamp = 0;
+    uint16_t RearWheelSpeed_raw;
+
+    if (CAN0.readMsgBuf(&canMsg.can_id, &canMsg.can_dlc, canMsg.data) == CAN_OK)
+    {
+        RearWheelSpeed_raw = (uint16_t)canMsg.data[5] << 8 | canMsg.data[6];
+        // raw / FACTOR_RWP_KMH_890ADV -> km/h * 100000 -> cm/h / 3600 -> cm/s
+        // raw * 500 -> cm/s
+        uint32_t RWP_millimeter_per_second = (((uint32_t)RearWheelSpeed_raw * 1000000) / FACTOR_RWP_KMH_890ADV) / 3600;
+
+        uint32_t timesincelast = millis() - lastRecTimestamp;
+        lastRecTimestamp = millis();
+
+        uint32_t milimeters_to_add = (RWP_millimeter_per_second * timesincelast) / 1000;
+
+        return milimeters_to_add;
+    }
+
+    MaintainDTC(DTC_NO_CAN_SIGNAL, DTC_CRITICAL, (millis() > lastRecTimestamp + 10000 ? true : false));
+
+    return 0;
+}
+#endif

Software/src/can.h

@@ -0,0 +1,21 @@
+#ifndef _CAN_H_
+#define _CAN_H_
+
+#include <Arduino.h>
+#include <mcp_can.h>
+#include <SPI.h>
+#include "common.h"
+#include "globals.h"
+#include "dtc.h"
+
+struct can_frame
+{
+    unsigned long can_id;
+    uint8_t can_dlc;
+    uint8_t data[8] __attribute__((aligned(8)));
+};
+
+void Init_CAN();
+uint32_t Process_CAN_WheelSpeed();
+
+#endif

Software/src/common.h

@@ -0,0 +1,53 @@
+#ifndef _COMMON_H_
+#define _COMMON_H_
+
+#define Q(x) #x
+#define QUOTE(x) Q(x)
+
+#if PCB_REV == 2
+    #define GPIO_BUTTON D7
+    #define GPIO_LED D8
+    #define GPIO_TRIGGER D6
+    #define GPIO_PUMP D5
+#elif PCB_REV == 1 || PCB_REV == 3
+    #define GPIO_BUTTON D5
+    #define GPIO_LED D6
+    #define GPIO_TRIGGER D4
+    #define GPIO_PUMP D3
+#elif PCB_REV == 4
+    #define GPIO_BUTTON D4
+    #define GPIO_LED D3
+    #define GPIO_TRIGGER D6
+    #define GPIO_PUMP D0
+    #define GPIO_CS_CAN D8
+#endif
+
+#ifndef HOST_NAME
+#define HOST_NAME "ChainLube_%06X" // Use printf-Formatting - Chip-ID (uin32_t) will be added
+#endif
+
+#define SW_VERSION 1.2
+
+#define FLASH_FS_VERSION 1.2
+
+#ifndef OTA_DELAY
+#define OTA_DELAY 50 // ticks -> 10ms / tick
+#endif
+
+#define LUBE_PULSE_LENGHT_MS 160
+#define LUBE_PULSE_PAUSE_MS 340
+
+// -> 2Hz PumpPulse
+// -> 49,7cc  / h @ 2Hz
+// -> 49,7 ml / h @ 2Hz
+// -> 828,4µl / min @ 2Hz
+// -> 828,3µl / 60s 
+// -> 13,81µl / 1s
+// ->  6,90µl / Pulse
+
+#define DEFAULT_PUMP_DOSE 7
+
+#define STARTUP_DELAY 5000
+#define SHUTDOWN_DELAY_MS 5000
+
+#endif

Software/src/config.cpp

@@ -0,0 +1,233 @@
+#include "config.h"
+
+I2C_eeprom ee(0x50, EEPROM_SIZE_BYTES);
+
+LubeConfig_t LubeConfig;
+persistenceData_t PersistenceData;
+const uint16_t eeVersion = 2; // inc
+boolean eeAvailable = false;
+
+const uint16_t startofLubeConfig = 16;
+const uint16_t startofPersistence = 16 + sizeof(LubeConfig) + (sizeof(LubeConfig) % 16);
+
+boolean checkEEPROMavailable();
+
+void InitEEPROM()
+{
+  ee.begin();
+  checkEEPROMavailable();
+}
+
+void EEPROM_Process()
+{
+  switch (globals.requestEEAction)
+  {
+  case EE_CFG_SAVE:
+    StoreConfig_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    break;
+  case EE_CFG_LOAD:
+    GetConfig_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    break;
+  case EE_CFG_FORMAT:
+    FormatConfig_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    globals.systemStatus = sysStat_Shutdown;
+    break;
+  case EE_PDS_SAVE:
+    StorePersistence_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    break;
+  case EE_PDS_LOAD:
+    GetPersistence_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    break;
+  case EE_PDS_FORMAT:
+    FormatPersistence_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    break;
+  case EE_FORMAT_ALL:
+    FormatConfig_EEPROM();
+    FormatPersistence_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    break;
+  case EE_ALL_SAVE:
+    StorePersistence_EEPROM();
+    StoreConfig_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    break;
+  case EE_IDLE:
+  default:
+    globals.requestEEAction = EE_IDLE;
+  }
+}
+
+void StoreConfig_EEPROM()
+{
+  LubeConfig.checksum = 0;
+  LubeConfig.checksum = Checksum_EEPROM((uint8_t *)&LubeConfig, sizeof(LubeConfig));
+  if (!checkEEPROMavailable())
+    return;
+
+  ee.updateBlock(startofLubeConfig, (uint8_t *)&LubeConfig, sizeof(LubeConfig));
+}
+
+void GetConfig_EEPROM()
+{
+  if (!checkEEPROMavailable())
+    return;
+
+  ee.readBlock(startofLubeConfig, (uint8_t *)&LubeConfig, sizeof(LubeConfig));
+
+  uint32_t checksum = LubeConfig.checksum;
+  LubeConfig.checksum = 0;
+
+  if (Checksum_EEPROM((uint8_t *)&LubeConfig, sizeof(LubeConfig)) != checksum)
+  {
+    MaintainDTC(DTC_EEPROM_CFG_BAD, DTC_CRITICAL, true);
+  }
+  LubeConfig.checksum = checksum;
+}
+
+void StorePersistence_EEPROM()
+{
+  if (PersistenceData.writeCycleCounter >= 0xFFF0)
+    MovePersistencePage_EEPROM(false);
+  else
+    PersistenceData.writeCycleCounter++;
+
+  PersistenceData.checksum = 0;
+  PersistenceData.checksum = Checksum_EEPROM((uint8_t *)&PersistenceData, sizeof(PersistenceData));
+
+  if (!checkEEPROMavailable())
+    return;
+
+  ee.updateBlock(globals.eePersistanceAdress, (uint8_t *)&PersistenceData, sizeof(PersistenceData));
+}
+
+void GetPersistence_EEPROM()
+{
+  if (!checkEEPROMavailable())
+    return;
+
+  ee.readBlock(0, (uint8_t *)&globals.eePersistanceAdress, sizeof(globals.eePersistanceAdress));
+  // if we got the StartAdress of Persistance and it's out of Range - we Reset it and store defaults
+  // otherwise we Read from eeprom and check if everything is correct
+  if (globals.eePersistanceAdress < startofPersistence || globals.eePersistanceAdress > ee.getDeviceSize())
+  {
+    MovePersistencePage_EEPROM(true);
+    FormatPersistence_EEPROM();
+    MaintainDTC(DTC_EEPROM_PDSADRESS_BAD, DTC_CRITICAL, true);
+  }
+  else
+  {
+    ee.readBlock(globals.eePersistanceAdress, (uint8_t *)&PersistenceData, sizeof(PersistenceData));
+
+    uint32_t checksum = PersistenceData.checksum;
+    PersistenceData.checksum = 0;
+
+    if (Checksum_EEPROM((uint8_t *)&PersistenceData, sizeof(PersistenceData)) != checksum)
+    {
+      MaintainDTC(DTC_EEPROM_PDS_BAD, DTC_CRITICAL, true);
+    }
+    PersistenceData.checksum = checksum;
+  }
+}
+
+void FormatConfig_EEPROM()
+{
+  Serial.println("Formatting Config-Partition");
+  LubeConfig = LubeConfig_defaults;
+  LubeConfig.EEPROM_Version = eeVersion;
+  StoreConfig_EEPROM();
+}
+
+void FormatPersistence_EEPROM()
+{
+  Serial.println("Formatting Persistance-Partition");
+  memset(&PersistenceData, 0, sizeof(PersistenceData));
+  StorePersistence_EEPROM();
+}
+
+void MovePersistencePage_EEPROM(boolean reset)
+{
+  if (!checkEEPROMavailable())
+    return;
+
+  globals.eePersistanceAdress = +sizeof(PersistenceData);
+  PersistenceData.writeCycleCounter = 0;
+
+  // check if we reached the End of the EEPROM and Startover at the beginning
+  if ((globals.eePersistanceAdress + sizeof(PersistenceData)) > ee.getDeviceSize() || reset)
+  {
+    globals.eePersistanceAdress = startofPersistence;
+  }
+
+  ee.updateBlock(0, (uint8_t *)&globals.eePersistanceAdress, sizeof(globals.eePersistanceAdress));
+}
+
+uint32_t Checksum_EEPROM(uint8_t const *data, size_t len)
+{
+  if (data == NULL)
+    return 0;
+  uint32_t crc, mask;
+  crc = 0xFFFFFFFF;
+
+  while (len--)
+  {
+    crc ^= *data++;
+    for (uint8_t k = 0; k < 8; k++)
+    {
+      mask = -(crc & 1);
+      crc = (crc >> 1) ^ (0xEDB88320 & mask);
+    }
+  }
+  return ~crc;
+}
+
+void dumpEEPROM(uint16_t memoryAddress, uint16_t length)
+{
+#define BLOCK_TO_LENGTH 16
+
+  if (!checkEEPROMavailable())
+    return;
+
+  char ascii_buf[BLOCK_TO_LENGTH + 1];
+  sprintf(ascii_buf, "%*s", BLOCK_TO_LENGTH, "ASCII");
+  Serial.print(PSTR("\nAddress "));
+  for (int x = 0; x < BLOCK_TO_LENGTH; x++)
+    Serial.printf("%3d", x);
+
+  memoryAddress = memoryAddress / BLOCK_TO_LENGTH * BLOCK_TO_LENGTH;
+  length = (length + BLOCK_TO_LENGTH - 1) / BLOCK_TO_LENGTH * BLOCK_TO_LENGTH;
+
+  for (unsigned int i = 0; i < length; i++)
+  {
+    int blockpoint = memoryAddress % BLOCK_TO_LENGTH;
+    if (blockpoint == 0)
+    {
+      ascii_buf[BLOCK_TO_LENGTH] = 0;
+      Serial.printf("  %s", ascii_buf);
+      Serial.printf("\n0x%05X:", memoryAddress);
+    }
+    ascii_buf[blockpoint] = ee.readByte(memoryAddress);
+    Serial.printf(" %02X", ascii_buf[blockpoint]);
+    if (ascii_buf[blockpoint] < 0x20 || ascii_buf[blockpoint] > 0x7E)
+      ascii_buf[blockpoint] = '.';
+    memoryAddress++;
+  }
+  Serial.println();
+}
+
+boolean checkEEPROMavailable()
+{
+  if (!ee.isConnected())
+  {
+    MaintainDTC(DTC_NO_EEPROM_FOUND, DTC_CRITICAL, true);
+    globals.systemStatus = sysStat_Error;
+    return false;
+  }
+  MaintainDTC(DTC_NO_EEPROM_FOUND, DTC_CRITICAL, false);
+  return true;
+}

Software/src/config.h

@@ -0,0 +1,123 @@
+#ifndef _CONFIG_H_
+#define _CONFIG_H_
+
+#include <Arduino.h>
+#include <Wire.h>
+#include <I2C_eeprom.h>
+#include "globals.h"
+#include "dtc.h"
+#include "common.h"
+
+#define EEPROM_SIZE_BYTES I2C_DEVICESIZE_24LC256
+
+typedef enum SpeedSource_e
+{
+  SOURCE_TIME,
+  SOURCE_IMPULSE,
+#ifdef FEATURE_ENABLE_GPS
+  SOURCE_GPS,
+#endif
+#if FEATURE_ENABLE_CAN
+  SOURCE_CAN
+#endif
+} SpeedSource_t;
+
+const char SpeedSourceString[][8] = {
+    "Timer",
+    "Impuls",
+#ifdef FEATURE_ENABLE_GPS
+    "GPS",
+#endif
+#if FEATURE_ENABLE_CAN
+    "CAN-Bus"
+#endif
+};
+
+#ifdef FEATURE_ENABLE_GPS
+typedef enum GPSBaudRate_e
+{
+  BAUD_9600,
+  BAUD_115200
+} GPSBaudRate_t;
+
+const char GPSBaudRateString[][7] = {
+    "9600",
+    "115200"};
+
+const size_t GPSBaudRateString_Elements = sizeof(GPSBaudRateString) / sizeof(GPSBaudRateString[0]);
+#endif
+
+#ifdef FEATURE_ENABLE_CAN
+typedef enum CANSource_e
+{
+  KTM_890_ADV_R_2021
+} CANSource_t;
+
+const char CANSourceString[][28] = {
+    "KTM 890 Adventure R (2021)"};
+
+const char CANSourceString_Elements = sizeof(CANSourceString) / sizeof(CANSourceString[0]);
+#endif
+
+const size_t SpeedSourceString_Elements = sizeof(SpeedSourceString) / sizeof(SpeedSourceString[0]);
+
+typedef struct
+{
+  uint16_t writeCycleCounter = 0;
+  uint32_t tankRemain_µl = 0;
+  uint32_t TravelDistance_highRes_mm = 0;
+  uint32_t odometer_mm = 0;
+  uint32_t odometer = 0;
+  uint32_t checksum = 0;
+} persistenceData_t;
+
+typedef struct
+{
+  uint8_t EEPROM_Version = 0;
+  uint32_t DistancePerLube_Default = 8000;
+  uint32_t DistancePerLube_Rain = 4000;
+  uint32_t tankCapacity_ml = 320;
+  uint32_t amountPerDose_µl = DEFAULT_PUMP_DOSE;
+  uint8_t TankRemindAtPercentage = 30;
+  uint8_t PulsePerRevolution = 1;
+  uint32_t TireWidth_mm = 150;
+  uint32_t TireWidthHeight_Ratio = 70;
+  uint32_t RimDiameter_Inch = 18;
+  uint32_t DistancePerRevolution_mm = 2000;
+  uint16_t BleedingPulses = 25;
+  SpeedSource_t SpeedSource = SOURCE_IMPULSE;
+#ifdef FEATURE_ENABLE_GPS
+  GPSBaudRate_t GPSBaudRate = BAUD_115200;
+#endif
+#ifdef FEATURE_ENABLE_CAN
+  CANSource_t CANSource = KTM_890_ADV_R_2021;
+#endif
+  uint32_t checksum = 0;
+} LubeConfig_t;
+
+const LubeConfig_t LubeConfig_defaults{
+    0, 8000, 4000, 320, DEFAULT_PUMP_DOSE, 30, 1, 150, 70, 18, 2000, 25, SOURCE_IMPULSE,
+#ifdef FEATURE_ENABLE_GPS
+    BAUD_115200,
+#endif
+#ifdef FEATURE_ENABLE_CAN
+    KTM_890_ADV_R_2021,
+#endif
+    0};
+
+void InitEEPROM();
+void EEPROM_Process();
+void StoreConfig_EEPROM();
+void GetConfig_EEPROM();
+void StorePersistence_EEPROM();
+void GetPersistence_EEPROM();
+void FormatConfig_EEPROM();
+void FormatPersistence_EEPROM();
+uint32_t Checksum_EEPROM(uint8_t const *data, size_t len);
+void dumpEEPROM(uint16_t memoryAddress, uint16_t length);
+void MovePersistencePage_EEPROM(boolean reset);
+
+extern LubeConfig_t LubeConfig;
+extern persistenceData_t PersistenceData;
+extern uint16_t eePersistenceMarker;
+#endif // _CONFIG_H_

Software/src/dtc.cpp

@@ -0,0 +1,106 @@
+#include "dtc.h"
+
+DTCEntry_s DTCStorage[MAX_DTC_STORAGE];
+
+void MaintainDTC(DTCNums_t DTC_no, DTCSeverity_t DTC_severity, boolean active)
+{
+    for (int i = 0; i < MAX_DTC_STORAGE; i++)
+    {
+        if (DTCStorage[i].Number == DTC_no)
+        {
+            if (active && DTCStorage[i].active != DTC_ACTIVE)
+            {
+                Serial.printf("DTC gone active: %d\n", DTC_no);
+                DTCStorage[i].timestamp = millis();
+                DTCStorage[i].active = DTC_ACTIVE;
+                DTCStorage[i].severity = DTC_severity;
+            }
+            if (!active && DTCStorage[i].active == DTC_ACTIVE)
+            {
+                Serial.printf("DTC gone previous: %d\n", DTC_no);
+                DTCStorage[i].active = DTC_PREVIOUS;
+            }
+            return;
+        }
+    }
+
+    // DTC was not found with upper iteration, but is active
+    // so we need to look for free space to store DTC
+    if (active == true)
+    {
+        for (int i = 0; i < MAX_DTC_STORAGE; i++)
+        {
+            if (DTCStorage[i].Number == DTC_LAST_DTC)
+            {
+                Serial.printf("new DTC registered: %d\n", DTC_no);
+                DTCStorage[i].Number = DTC_no;
+                DTCStorage[i].timestamp = millis();
+                DTCStorage[i].active = DTC_ACTIVE;
+                return;
+            }
+        }
+    }
+}
+
+void ClearDTC(DTCNums_t DTC_no)
+{
+    for (int i = 0; i < MAX_DTC_STORAGE; i++)
+    {
+        if (DTCStorage[i].Number == DTC_no)
+        {
+            DTCStorage[i].Number = DTC_LAST_DTC;
+            DTCStorage[i].active = DTC_NONE;
+            DTCStorage[i].timestamp = 0;
+        }
+    }
+}
+
+void ClearAllDTC()
+{
+    for (int i = 0; i < MAX_DTC_STORAGE; i++)
+    {
+        DTCStorage[i].Number = DTC_LAST_DTC;
+        DTCStorage[i].active = DTC_NONE;
+        DTCStorage[i].timestamp = 0;
+    }
+}
+
+DTCNums_t getlastDTC(boolean only_active)
+{
+    int8_t pointer = -1;
+    uint32_t lasttimestamp = 0;
+
+    for (int i = 0; i < MAX_DTC_STORAGE; i++)
+    {
+        if (DTCStorage[i].Number > 0 && DTCStorage[i].timestamp > lasttimestamp)
+        {
+            if (only_active == false || DTCStorage[i].active == DTC_ACTIVE)
+            {
+                pointer = i;
+                lasttimestamp = DTCStorage[i].timestamp;
+            }
+        }
+    }
+
+    return pointer >= 0 ? DTCStorage[pointer].Number : DTC_LAST_DTC;
+}
+
+DTCNums_t getlastDTC_Severity(boolean only_active, DTCSeverity_t severity)
+{
+    int8_t pointer = -1;
+    uint32_t lasttimestamp = 0;
+
+    for (int i = 0; i < MAX_DTC_STORAGE; i++)
+    {
+        if (DTCStorage[i].Number > 0 && DTCStorage[i].timestamp > lasttimestamp)
+        {
+            if ((only_active == false || DTCStorage[i].active == DTC_ACTIVE) && DTCStorage[i].severity == severity)
+            {
+                pointer = i;
+                lasttimestamp = DTCStorage[i].timestamp;
+            }
+        }
+    }
+
+    return pointer >= 0 ? DTCStorage[pointer].Number : DTC_LAST_DTC;
+}

Software/src/dtc.h

@@ -0,0 +1,58 @@
+#ifndef _DTC_H_
+#define _DTC_H_
+
+#include <Arduino.h>
+
+#define MAX_DTC_STORAGE 6
+
+typedef enum DTCNums_e
+{
+  DTC_TANK_EMPTY = 1,
+  DTC_TANK_LOW,
+  DTC_NO_EEPROM_FOUND,
+  DTC_EEPROM_CFG_BAD,
+  DTC_EEPROM_PDS_BAD,
+  DTC_EEPROM_PDSADRESS_BAD,
+  DTC_EEPROM_VERSION_BAD,
+  DTC_FLASHFS_ERROR,
+  DTC_FLASHFS_VERSION_ERROR,
+#ifdef FEATURE_ENABLE_GPS
+  DTC_NO_GPS_SERIAL,
+#endif
+#ifdef FEATURE_ENABLE_CAN
+  DTC_CAN_TRANSCEIVER_FAILED,
+  DTC_NO_CAN_SIGNAL,
+#endif
+  DTC_LAST_DTC
+} DTCNums_t;
+
+typedef enum DTCActive_e
+{
+  DTC_NONE,
+  DTC_ACTIVE,
+  DTC_PREVIOUS
+} DTCActive_t;
+
+typedef enum DTCSeverity_e
+{
+  DTC_INFO,
+  DTC_WARN,
+  DTC_CRITICAL
+} DTCSeverity_t;
+
+typedef struct DTCEntry_s
+{
+  DTCNums_t Number;
+  uint32_t timestamp;
+  DTCActive_t active;
+  DTCSeverity_t severity;
+} DTCEntry_t;
+
+void MaintainDTC(DTCNums_t DTC_no, DTCSeverity_t DTC_severity, boolean active);
+void ClearDTC(DTCNums_t DTC_no);
+void ClearAllDTC();
+DTCNums_t getlastDTC(boolean only_active);
+DTCNums_t getlastDTC_Severity(boolean only_active, DTCSeverity_t severity);
+
+extern DTCEntry_s DTCStorage[MAX_DTC_STORAGE];
+#endif

Software/src/globals.h

@@ -0,0 +1,46 @@
+#ifndef _GLOBALS_H_
+#define _GLOBALS_H_
+
+#include <Arduino.h>
+
+typedef enum eSystem_Status
+{
+  sysStat_Startup,
+  sysStat_Normal,
+  sysStat_Rain,
+  sysStat_Purge,
+  sysStat_Error,
+  sysStat_Shutdown
+} tSystem_Status;
+
+typedef enum eEERequest
+{
+  EE_IDLE,
+  EE_CFG_SAVE,
+  EE_CFG_LOAD,
+  EE_CFG_FORMAT,
+  EE_PDS_SAVE,
+  EE_PDS_LOAD,
+  EE_PDS_FORMAT,
+  EE_FORMAT_ALL,
+  EE_ALL_SAVE
+
+} tEERequest;
+
+typedef struct Globals_s
+{
+  tSystem_Status systemStatus = sysStat_Startup;
+  tSystem_Status resumeStatus = sysStat_Startup;
+  char systemStatustxt[16] = "";
+  uint16_t purgePulses = 0;
+  eEERequest requestEEAction = EE_IDLE;
+  char DeviceName[33];
+  char FlashVersion[10];
+  uint16_t eePersistanceAdress;
+  uint8_t TankPercentage;
+  bool hasDTC;
+} Globals_t;
+
+extern Globals_t globals;
+
+#endif

Software/src/gps.cpp

@@ -0,0 +1,59 @@
+#ifdef FEATURE_ENABLE_GPS
+#include "gps.h"
+
+TinyGPSPlus gps;
+
+void Init_GPS()
+{
+    uint32_t baudrate;
+    switch (LubeConfig.GPSBaudRate)
+    {
+    case BAUD_9600:
+        baudrate = 9600;
+        break;
+    case BAUD_115200:
+        baudrate = 115200;
+        break;
+    default:
+        baudrate = 4800;
+        break;
+    }
+
+    Serial.printf(PSTR("Init GPS with Baud %d\n"), baudrate);
+    Serial.begin(baudrate);
+}
+
+uint32_t Process_GPS_WheelSpeed()
+{
+    static uint32_t lastRecTimestamp;
+    static uint32_t lastValidSpeedTimestamp;
+    uint16_t RearWheelSpeed_kmh;
+
+    while (Serial.available() > 0)
+    {
+        uint8_t incoming = Serial.read();
+        if (gps.encode(incoming))
+        {
+            RearWheelSpeed_kmh = gps.speed.isValid() ? gps.speed.kmph() : 0;
+
+            if (RearWheelSpeed_kmh > 0)
+            {
+                uint32_t RWP_millimeter_per_second = ((uint32_t)RearWheelSpeed_kmh * 1000000) / 3600;
+
+                uint32_t timesincelast = millis() - lastValidSpeedTimestamp;
+                lastValidSpeedTimestamp = millis();
+
+                uint32_t milimeters_to_add = (RWP_millimeter_per_second * timesincelast) / 1000;
+
+                return milimeters_to_add;
+            }
+            lastRecTimestamp = millis();
+        }
+    }
+
+    MaintainDTC(DTC_NO_GPS_SERIAL,DTC_CRITICAL, (millis() > lastRecTimestamp + 10000));
+
+    return 0;
+}
+
+#endif

Software/src/gps.h

@@ -0,0 +1,12 @@
+#ifndef _GPS_H_
+#define _GPS_H_
+
+#include <TinyGPSPlus.h>
+#include "config.h"
+#include "common.h"
+#include "dtc.h"
+
+void Init_GPS();
+uint32_t Process_GPS_WheelSpeed();
+
+#endif

Software/src/lubeapp.cpp

@@ -0,0 +1,133 @@
+#include "lubeapp.h"
+
+uint32_t lubePulseTimestamp = 0;
+
+void RunLubeApp(uint32_t add_milimeters)
+{
+
+    globals.TankPercentage = PersistenceData.tankRemain_µl / (LubeConfig.tankCapacity_ml * 10);
+
+    MaintainDTC(DTC_TANK_EMPTY, DTC_CRITICAL, (PersistenceData.tankRemain_µl < LubeConfig.amountPerDose_µl));
+    MaintainDTC(DTC_TANK_LOW, DTC_WARN, (globals.TankPercentage < LubeConfig.TankRemindAtPercentage));
+
+    static tSystem_Status preserverSysStatusError;
+
+    if (getlastDTC(false) < DTC_LAST_DTC)
+    {
+        globals.hasDTC = true;
+        if (getlastDTC_Severity(true, DTC_CRITICAL) < DTC_LAST_DTC)
+        {
+            if (globals.systemStatus != sysStat_Error)
+            {
+                preserverSysStatusError = globals.systemStatus;
+            }
+            globals.systemStatus = sysStat_Error;
+        }
+        else
+        {
+            if (globals.systemStatus == sysStat_Error)
+            {
+                globals.systemStatus = preserverSysStatusError;
+            }
+        }
+    }
+    else
+    {
+        globals.hasDTC = false;
+    }
+
+    // Add traveled Distance in mm
+    PersistenceData.TravelDistance_highRes_mm += add_milimeters;
+    PersistenceData.odometer_mm += add_milimeters;
+    if (PersistenceData.odometer_mm >= 1000000)
+    {
+        PersistenceData.odometer++;
+        PersistenceData.odometer_mm = 0;
+    }
+
+    switch (globals.systemStatus)
+    {
+    case sysStat_Startup:
+        if (millis() > STARTUP_DELAY)
+        {
+            globals.systemStatus = sysStat_Normal;
+            globals.resumeStatus = sysStat_Normal;
+        }
+        break;
+
+    case sysStat_Normal:
+        if (PersistenceData.TravelDistance_highRes_mm / 1000 > LubeConfig.DistancePerLube_Default)
+        {
+            LubePulse();
+            PersistenceData.TravelDistance_highRes_mm = 0;
+        }
+        break;
+
+    case sysStat_Rain:
+        if (PersistenceData.TravelDistance_highRes_mm / 1000 > LubeConfig.DistancePerLube_Rain)
+        {
+            LubePulse();
+            PersistenceData.TravelDistance_highRes_mm = 0;
+        }
+        break;
+    case sysStat_Purge:
+        if (globals.purgePulses > 0)
+        {
+            if (lubePulseTimestamp + LUBE_PULSE_PAUSE_MS < millis())
+            {
+                LubePulse();
+                globals.purgePulses--;
+            }
+        }
+        else
+        {
+            globals.systemStatus = globals.resumeStatus;
+        }
+        break;
+    case sysStat_Error:
+    case sysStat_Shutdown:
+    default:
+        break;
+    }
+
+    switch (globals.systemStatus)
+    {
+    case sysStat_Normal:
+        strcpy_P(globals.systemStatustxt, PSTR("Normal"));
+        break;
+    case sysStat_Purge:
+        strcpy_P(globals.systemStatustxt, PSTR("Purge"));
+        break;
+    case sysStat_Rain:
+        strcpy_P(globals.systemStatustxt, PSTR("Rain"));
+        break;
+    case sysStat_Startup:
+        strcpy_P(globals.systemStatustxt, PSTR("Startup"));
+        break;
+    case sysStat_Error:
+        strcpy_P(globals.systemStatustxt, PSTR("Error"));
+        break;
+    case sysStat_Shutdown:
+        strcpy_P(globals.systemStatustxt, PSTR("Shutdown"));
+        break;
+    }
+
+    // maintain Pin-State of Lube-Pump
+    if (lubePulseTimestamp > millis())
+        digitalWrite(GPIO_PUMP, HIGH);
+    else
+        digitalWrite(GPIO_PUMP, LOW);
+}
+
+void LubePulse()
+{
+    if (PersistenceData.tankRemain_µl > 0) // Only Lube if theres Oil remaining!
+    {
+        lubePulseTimestamp = millis() + LUBE_PULSE_LENGHT_MS;
+
+        if (PersistenceData.tankRemain_µl < LubeConfig.amountPerDose_µl) // Prevent underrun and shiftover
+            PersistenceData.tankRemain_µl = 0;
+        else
+            PersistenceData.tankRemain_µl = PersistenceData.tankRemain_µl - LubeConfig.amountPerDose_µl;
+    }
+}

Software/src/lubeapp.h

@@ -0,0 +1,14 @@
+#ifndef _LUBEAPP_H_
+#define _LUBEAPP_H_
+
+#include <Arduino.h>
+#include <stdlib.h>
+#include "config.h"
+#include "common.h"
+#include "globals.h"
+#include "dtc.h"
+
+void RunLubeApp(uint32_t add_milimeters);
+void LubePulse();
+
+#endif

Software/src/main.cpp

@@ -0,0 +1,816 @@
+#include <Arduino.h>
+#include <Wire.h>
+#ifdef FEATURE_ENABLE_OLED
+#include <U8g2lib.h>
+#endif
+#include <ESP8266WiFi.h>
+#include <ArduinoOTA.h>
+
+#include <FastLED.h>
+#include <Ticker.h>
+
+#include "common.h"
+
+#include "sanitycheck.h"
+
+#include "lubeapp.h"
+#include "webui.h"
+#include "config.h"
+#include "globals.h"
+#ifdef FEATURE_ENABLE_CAN
+#include "can.h"
+#endif
+#ifdef FEATURE_ENABLE_GPS
+#include "gps.h"
+#endif
+#include "dtc.h"
+
+#ifdef FEATURE_ENABLE_REMOTE_DEBUG
+#include <RemoteDebug.h>
+#include "rmtdbghelp.h"
+#else
+#define debugV Serial.println
+#define debugE Serial.println
+#endif
+
+#ifdef FEATURE_ENABLE_WIFI_CLIENT
+#include <ESP8266WiFiMulti.h>
+
+const char *ssid = QUOTE(WIFI_SSID_CLIENT);
+const char *password = QUOTE(WIFI_PASSWORD_CLIENT);
+const uint32_t connectTimeoutMs = 5000;
+
+ESP8266WiFiMulti wifiMulti;
+#endif
+
+bool startSetupMode = false;
+
+Globals_t globals;
+uint32_t TravelDistance_highRes;
+volatile uint32_t wheel_pulse = 0;
+
+CRGB leds[1];
+
+// Function-Prototypes
+void IRAM_ATTR trigger_ISR();
+void LED_Process(uint8_t override = false, CRGB setColor = CRGB::White);
+#ifdef FEATURE_ENABLE_OLED
+U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(-1);
+void Display_Process();
+#endif
+void Button_Process();
+void toggleWiFiAP(boolean shutdown = false);
+void SystemShutdown();
+uint32_t Process_Impulse_WheelSpeed();
+void EEPROMCyclicPDS_callback();
+void initGlobals();
+
+#ifdef FEATURE_ENABLE_REMOTE_DEBUG
+RemoteDebug Debug;
+String IpAddress2String(const IPAddress &ipAddress);
+void processCmdRemoteDebug();
+void RemoteDebug_formatCFG();
+void RemoteDebug_formatPersistence();
+void RemotDebug_printSystemInfo();
+void RemoteDebug_printWifiInfo();
+void RemoteDebug_CheckEEPOM();
+void RemoteDebug_dumpConfig();
+void RemoteDebug_dumpPersistance();
+void RemoteDebug_ShowDTCs();
+void RemoteDebug_dumpGlobals();
+#endif
+
+#ifdef FEATURE_ENABLE_WIFI_CLIENT
+void wifiMaintainConnectionTicker_callback();
+Ticker WiFiMaintainConnectionTicker(wifiMaintainConnectionTicker_callback, 1000, 0, MILLIS);
+#endif
+Ticker EEPROMCyclicPDSTicker(EEPROMCyclicPDS_callback, 60000, 0, MILLIS);
+
+void setup()
+{
+  system_update_cpu_freq(SYS_CPU_80MHZ);
+  snprintf(globals.DeviceName, 32, HOST_NAME, ESP.getChipId());
+  WiFi.persistent(false);
+
+  ClearAllDTC(); // Init DTC-Storage
+
+#ifdef FEATURE_ENABLE_WIFI_CLIENT
+  WiFi.mode(WIFI_STA);
+  WiFi.setHostname(globals.DeviceName);
+  wifiMulti.addAP(QUOTE(WIFI_SSID_CLIENT), QUOTE(WIFI_PASSWORD_CLIENT));
+  WiFiMaintainConnectionTicker.start();
+#else
+  WiFi.mode(WIFI_OFF);
+#endif
+
+  Serial.begin(115200);
+  Serial.setDebugOutput(false);
+
+  Serial.println("\n\nSouko's ChainLube Mk1");
+  Serial.println(globals.DeviceName);
+
+  InitEEPROM();
+  GetConfig_EEPROM();
+  GetPersistence_EEPROM();
+#ifdef FEATURE_ENABLE_OLED
+  u8x8.begin();
+  u8x8.setFont(u8x8_font_chroma48medium8_r);
+#endif
+  FastLED.addLeds<WS2811, GPIO_LED, RGB>(leds, 1); // GRB ordering is assumed
+
+  switch (LubeConfig.SpeedSource)
+  {
+  case SOURCE_IMPULSE:
+    pinMode(GPIO_TRIGGER, INPUT_PULLUP);
+    attachInterrupt(digitalPinToInterrupt(GPIO_TRIGGER), trigger_ISR, FALLING);
+    break;
+#ifdef FEATURE_ENABLE_GPS
+  case SOURCE_GPS:
+    Init_GPS();
+    break;
+#endif
+  case SOURCE_TIME:
+
+    break;
+#ifdef FEATURE_ENABLE_CAN
+  case SOURCE_CAN:
+    Init_CAN();
+    break;
+#endif
+  default:
+    debugE("Source Setting N/A");
+    break;
+  }
+
+  pinMode(GPIO_BUTTON, INPUT_PULLUP);
+  pinMode(GPIO_PUMP, OUTPUT);
+
+#ifdef FEATURE_ENABLE_REMOTE_DEBUG
+  Debug.begin(globals.DeviceName);
+  Debug.setResetCmdEnabled(true);
+  Debug.showProfiler(false);
+  Debug.showColors(true);
+  Debug.setPassword(QUOTE(ADMIN_PASSWORD));
+  Debug.setSerialEnabled(true);
+  Debug.showDebugLevel(true);
+
+  Debug.setHelpProjectsCmds(helpCmd);
+  Debug.setCallBackProjectCmds(&processCmdRemoteDebug);
+#endif
+
+  ArduinoOTA.setPort(8266);
+  ArduinoOTA.setHostname(globals.DeviceName);
+  ArduinoOTA.setPassword(QUOTE(ADMIN_PASSWORD));
+#ifdef FEATURE_ENABLE_OLED
+  ArduinoOTA.onStart([]()
+                     {
+                       u8x8.clearDisplay();
+                       u8x8.drawString(0, 0, "OTA-Update");
+                       u8x8.refreshDisplay(); });
+
+  ArduinoOTA.onProgress([](unsigned int progress, unsigned int total)
+                        {
+                          static bool refreshed = false;
+                          if (!refreshed)
+                          {
+                            u8x8.clearDisplay();
+                            refreshed = true;
+                            u8x8.drawString(0, 0, "OTA Upload");
+                          }
+                          uint32_t percent = progress / (total / 100);
+                          u8x8.setCursor(0, 1);
+                          u8x8.printf("%d %%", percent);
+                          u8x8.refreshDisplay(); });
+
+  ArduinoOTA.onEnd([]()
+                   {
+                     u8x8.clearDisplay();
+                     u8x8.drawString(0, 0, "OTA-Restart");
+                     u8x8.refreshDisplay(); });
+#endif
+  ArduinoOTA.begin();
+
+#ifdef FEATURE_ENABLE_OLED
+  u8x8.clearDisplay();
+  u8x8.drawString(0, 0, "KTM ChainLube V1");
+  u8x8.refreshDisplay();
+#endif
+
+  initWebUI();
+  initGlobals();
+  EEPROMCyclicPDSTicker.start();
+  Serial.println("Setup Done");
+}
+
+void loop()
+{
+  uint32_t wheelDistance = 0;
+
+  switch (LubeConfig.SpeedSource)
+  {
+  case SOURCE_IMPULSE:
+    wheelDistance = Process_Impulse_WheelSpeed();
+    break;
+#ifdef FEATURE_ENABLE_CAN
+  case SOURCE_CAN:
+    wheelDistance = Process_CAN_WheelSpeed();
+    break;
+#endif
+  case SOURCE_TIME:
+    break;
+#ifdef FEATURE_ENABLE_GPS
+  case SOURCE_GPS:
+    wheelDistance = Process_GPS_WheelSpeed();
+    break;
+#endif
+  }
+
+  RunLubeApp(wheelDistance);
+  EEPROMCyclicPDSTicker.update();
+#ifdef FEATURE_ENABLE_OLED
+  Display_Process();
+#endif
+  Button_Process();
+  LED_Process();
+  EEPROM_Process();
+
+  ArduinoOTA.handle();
+#ifdef FEATURE_ENABLE_REMOTE_DEBUG
+  Debug.handle();
+#endif
+#ifdef FEATURE_ENABLE_WIFI_CLIENT
+  WiFiMaintainConnectionTicker.update();
+#endif
+  if (globals.systemStatus == sysStat_Shutdown)
+    SystemShutdown();
+  yield();
+}
+
+String IpAddress2String(const IPAddress &ipAddress)
+{
+  return String(ipAddress[0]) + String(".") +
+         String(ipAddress[1]) + String(".") +
+         String(ipAddress[2]) + String(".") +
+         String(ipAddress[3]);
+}
+
+void initGlobals()
+{
+  globals.purgePulses = 0;
+  globals.requestEEAction = EE_IDLE;
+  globals.resumeStatus = sysStat_Normal;
+  globals.systemStatus = sysStat_Startup;
+}
+
+#ifdef FEATURE_ENABLE_REMOTE_DEBUG
+void processCmdRemoteDebug()
+{
+  String lastCmd = Debug.getLastCommand();
+
+  if (lastCmd == "sysinfo")
+    RemotDebug_printSystemInfo();
+  else if (lastCmd == "netinfo")
+    RemoteDebug_printWifiInfo();
+  else if (lastCmd == "formatCFG")
+    RemoteDebug_formatCFG();
+  else if (lastCmd == "formatPDS")
+    RemoteDebug_formatPersistence();
+  else if (lastCmd == "checkEE")
+    RemoteDebug_CheckEEPOM();
+  else if (lastCmd == "dumpEE1k")
+    dumpEEPROM(0, 1024);
+  else if (lastCmd == "dumpEE")
+    dumpEEPROM(0, EEPROM_SIZE_BYTES);
+  else if (lastCmd == "resetPageEE")
+    MovePersistencePage_EEPROM(true);
+  else if (lastCmd == "dumpCFG")
+    RemoteDebug_dumpConfig();
+  else if (lastCmd == "dumpPDS")
+    RemoteDebug_dumpPersistance();
+  else if (lastCmd == "saveEE")
+    globals.requestEEAction = EE_ALL_SAVE;
+  else if (lastCmd == "showdtc")
+    RemoteDebug_ShowDTCs();
+  else if (lastCmd == "dumpGlobals")
+    RemoteDebug_dumpGlobals();
+}
+
+void RemoteDebug_formatCFG()
+{
+  debugA("Formatting Config-EEPROM and reseting to default");
+  FormatConfig_EEPROM();
+}
+
+void RemoteDebug_formatPersistence()
+{
+  debugA("Formatting Persistence-EEPROM and reseting to default");
+  FormatPersistence_EEPROM();
+}
+
+void RemotDebug_printSystemInfo()
+{
+  debugA("Souko's ChainOiler Mk1");
+  debugA("Hostname: %s", globals.DeviceName);
+
+  FlashMode_t ideMode = ESP.getFlashChipMode();
+  debugA("Sdk version: %s", ESP.getSdkVersion());
+  debugA("Core Version: %s", ESP.getCoreVersion().c_str());
+  debugA("Boot Version: %u", ESP.getBootVersion());
+  debugA("Boot Mode: %u", ESP.getBootMode());
+  debugA("CPU Frequency: %u MHz", ESP.getCpuFreqMHz());
+  debugA("Reset reason: %s", ESP.getResetReason().c_str());
+  debugA("Flash Size: %d", ESP.getFlashChipRealSize());
+  debugA("Flash Size IDE: %d", ESP.getFlashChipSize());
+  debugA("Flash ide mode:  %s", (ideMode == FM_QIO ? "QIO" : ideMode == FM_QOUT ? "QOUT"
+                                                         : ideMode == FM_DIO    ? "DIO"
+                                                         : ideMode == FM_DOUT   ? "DOUT"
+                                                                                : "UNKNOWN"));
+  debugA("OTA-Pass: %s", QUOTE(ADMIN_PASSWORD));
+  debugA("Git-Revison: %s", GIT_REV);
+  debugA("Sw-Version: %s", QUOTE(SW_VERSION));
+}
+
+void RemoteDebug_dumpConfig()
+{
+  debugA("DistancePerLube_Default: %d", LubeConfig.DistancePerLube_Default);
+  debugA("DistancePerLube_Rain: %d", LubeConfig.DistancePerLube_Rain);
+  debugA("tankCapacity_ml: %d", LubeConfig.tankCapacity_ml);
+  debugA("amountPerDose_µl: %d", LubeConfig.amountPerDose_µl);
+  debugA("TankRemindAtPercentage: %d", LubeConfig.TankRemindAtPercentage);
+  debugA("PulsePerRevolution: %d", LubeConfig.PulsePerRevolution);
+  debugA("TireWidth_mm: %d", LubeConfig.TireWidth_mm);
+  debugA("TireWidthHeight_Ratio: %d", LubeConfig.TireWidth_mm);
+  debugA("RimDiameter_Inch: %d", LubeConfig.RimDiameter_Inch);
+  debugA("DistancePerRevolution_mm: %d", LubeConfig.DistancePerRevolution_mm);
+  debugA("BleedingPulses: %d", LubeConfig.BleedingPulses);
+  debugA("SpeedSource: %d", LubeConfig.SpeedSource);
+#ifdef FEATURE_ENABLE_GPS
+  debugA("GPSBaudRate: %d", LubeConfig.GPSBaudRate);
+#endif
+#ifdef FEATURE_ENABLE_CAN
+  debugA("CANSource: %d", LubeConfig.CANSource);
+#endif
+  debugA("checksum: 0x%08X", LubeConfig.checksum);
+}
+
+void RemoteDebug_dumpGlobals()
+{
+  debugA("systemStatus: %d", globals.systemStatus);
+  debugA("resumeStatus: %d", globals.resumeStatus);
+  debugA("systemStatustxt: %s", globals.systemStatustxt);
+  debugA("purgePulses: %d", globals.purgePulses);
+  debugA("requestEEAction: %d", globals.requestEEAction);
+  debugA("DeviceName: %s", globals.DeviceName);
+  debugA("FlashVersion: %s", globals.FlashVersion);
+  debugA("eePersistanceAdress: %d", globals.eePersistanceAdress);
+  debugA("TankPercentage: %d", globals.TankPercentage);
+  debugA("hasDTC: %d", globals.hasDTC);
+}
+
+void RemoteDebug_dumpPersistance()
+{
+  debugA("writeCycleCounter: %d", PersistenceData.writeCycleCounter);
+  debugA("tankRemain_µl: %d", PersistenceData.tankRemain_µl);
+  debugA("TravelDistance_highRes_mm: %d", PersistenceData.TravelDistance_highRes_mm);
+  debugA("checksum: %d", PersistenceData.checksum);
+  debugA("PSD Adress: 0x%04X", globals.eePersistanceAdress);
+}
+
+void RemoteDebug_printWifiInfo()
+{
+}
+
+void RemoteDebug_CheckEEPOM()
+{
+  uint32_t checksum = PersistenceData.checksum;
+  PersistenceData.checksum = 0;
+
+  if (Checksum_EEPROM((uint8_t *)&PersistenceData, sizeof(PersistenceData)) == checksum)
+  {
+    debugA("PersistenceData EEPROM Checksum OK\n");
+  }
+  else
+  {
+    debugA("PersistenceData EEPROM Checksum BAD\n");
+  }
+
+  PersistenceData.checksum = checksum;
+
+  checksum = LubeConfig.checksum;
+  LubeConfig.checksum = 0;
+
+  if (Checksum_EEPROM((uint8_t *)&LubeConfig, sizeof(LubeConfig)) == checksum)
+  {
+    debugA("LubeConfig EEPROM Checksum OK\n");
+  }
+  else
+  {
+    debugA("LubeConfig EEPROM Checksum BAD\n");
+  }
+  LubeConfig.checksum = checksum;
+}
+#endif
+
+#ifdef FEATURE_ENABLE_WIFI_CLIENT
+void wifiMaintainConnectionTicker_callback()
+{
+  static uint32_t WiFiFailCount = 0;
+  const uint32_t WiFiFailMax = 20;
+
+  if (wifiMulti.run(connectTimeoutMs) == WL_CONNECTED)
+  {
+    return;
+  }
+  else
+  {
+    if (WiFiFailCount < WiFiFailMax)
+    {
+      WiFiFailCount++;
+    }
+    else
+    {
+      debugV("WiFi not connected! - Start AP");
+      toggleWiFiAP();
+    }
+  }
+}
+#endif
+
+void EEPROMCyclicPDS_callback()
+{
+  StorePersistence_EEPROM();
+}
+
+void trigger_ISR()
+{
+  wheel_pulse++;
+}
+
+void LED_Process(uint8_t override, CRGB SetColor)
+{
+  typedef enum
+  {
+    LED_Startup,
+    LED_Normal,
+    LED_Confirm_Normal,
+    LED_Rain,
+    LED_Confirm_Rain,
+    LED_Purge,
+    LED_Error,
+    LED_Override
+  } tLED_Status;
+
+  static tSystem_Status oldSysStatus = sysStat_Startup;
+  static tLED_Status LED_Status = LED_Startup;
+  static CRGB LED_override_color = 0;
+  static tLED_Status LED_ResumeOverrideStatus = LED_Startup;
+
+  uint8_t color = 0;
+  uint32_t timer = 0;
+  static uint32_t timestamp = 0;
+  timer = millis();
+
+  if (override == 1)
+  {
+    if (LED_Status != LED_Override)
+    {
+      LED_ResumeOverrideStatus = LED_Status;
+      debugV("Override LED_Status");
+    }
+    LED_Status = LED_Override;
+    LED_override_color = SetColor;
+  }
+
+  if (override == 2)
+  {
+    if (LED_Status == LED_Override)
+    {
+      LED_Status = LED_ResumeOverrideStatus;
+      debugV("Resume LED_Status");
+    }
+  }
+
+  if (oldSysStatus != globals.systemStatus)
+  {
+    switch (globals.systemStatus)
+    {
+    case sysStat_Startup:
+      LED_Status = LED_Startup;
+      debugV("sysStat: Startup");
+      break;
+    case sysStat_Normal:
+      timestamp = timer + 3500;
+      LED_Status = LED_Confirm_Normal;
+      debugV("sysStat: Normal");
+      break;
+    case sysStat_Rain:
+      timestamp = timer + 3500;
+      LED_Status = LED_Confirm_Rain;
+      debugV("sysStat: Rain");
+      break;
+    case sysStat_Purge:
+      LED_Status = LED_Purge;
+      debugV("sysStat: Purge");
+      break;
+    case sysStat_Error:
+      LED_Status = LED_Error;
+      debugV("sysStat: Error");
+      break;
+    case sysStat_Shutdown:
+    default:
+      break;
+    }
+    oldSysStatus = globals.systemStatus;
+  }
+
+  switch (LED_Status)
+  {
+  case LED_Startup:
+    FastLED.setBrightness(255);
+
+    if (globals.TankPercentage < LubeConfig.TankRemindAtPercentage)
+      leds[0] = CRGB::OrangeRed;
+    else
+      leds[0] = CRGB::White;
+    break;
+
+  case LED_Confirm_Normal:
+    FastLED.setBrightness(255);
+    leds[0] = timer % 250 > 125 ? CRGB(0, 255, 0) : CRGB(0, 4, 0);
+    if (timestamp < timer)
+    {
+      LED_Status = LED_Normal;
+      FastLED.setBrightness(64);
+      debugV("LED_Status: Confirm -> Normal");
+    }
+    break;
+
+  case LED_Normal:
+#ifndef NO_MODE_FLASH
+    if (timer % 2000 > 1950)
+      leds[0] = CRGB(0, 255, 0);
+    else if (WiFi.getMode() != WIFI_OFF && timer % 2000 > 1800 && timer % 2000 < 1850)
+#else
+    if (WiFi.getMode() != WIFI_OFF && timer % 2000 > 1950)
+#endif
+      leds[0] = CRGB(255, 128, 0);
+    else
+      leds[0] = CRGB(0, 4, 0);
+    break;
+
+  case LED_Confirm_Rain:
+    FastLED.setBrightness(255);
+    leds[0] = timer % 250 > 125 ? CRGB(0, 0, 255) : CRGB(0, 0, 4);
+    if (timestamp < timer)
+    {
+      LED_Status = LED_Rain;
+      FastLED.setBrightness(64);
+      debugV("LED_Status: Confirm -> Rain");
+    }
+    break;
+
+  case LED_Rain:
+#ifndef NO_MODE_FLASH
+    if (timer % 2000 > 1950)
+      leds[0] = CRGB(0, 0, 255);
+    else if (WiFi.getMode() != WIFI_OFF && timer % 2000 > 1800 && timer % 2000 < 1850)
+#else
+    if (WiFi.getMode() != WIFI_OFF && timer % 2000 > 1950)
+#endif
+      leds[0] = CRGB(255, 128, 0);
+    else
+      leds[0] = CRGB(0, 0, 4);
+    break;
+
+  case LED_Purge:
+    timer = timer % 500;
+    color = timer / 2;
+    leds[0] = CRGB::DeepPink;
+    if (timer < 250)
+      FastLED.setBrightness(color);
+    else
+      FastLED.setBrightness(250 - color);
+    break;
+
+  case LED_Error:
+    leds[0] = timer % 500 > 250 ? CRGB::Red : CRGB::Black;
+    break;
+
+  case LED_Override:
+    leds[0] = LED_override_color;
+    break;
+
+  default:
+    break;
+  }
+  FastLED.show();
+}
+#ifdef FEATURE_ENABLE_OLED
+void Display_Process()
+{
+  static tSystem_Status oldSysStatus = sysStat_Startup;
+
+  if (oldSysStatus != globals.systemStatus)
+  {
+    u8x8.clearDisplay();
+    u8x8.drawString(0, 0, "KTM ChainLube V1");
+    oldSysStatus = globals.systemStatus;
+  }
+
+  u8x8.setCursor(0, 1);
+  uint32_t DistRemain = globals.systemStatus == sysStat_Normal ? LubeConfig.DistancePerLube_Default : LubeConfig.DistancePerLube_Rain;
+  DistRemain -= TravelDistance_highRes / 1000;
+  u8x8.printf(PSTR("Mode: %10s\n"), globals.systemStatustxt);
+  if (globals.systemStatus == sysStat_Error)
+  {
+    u8x8.printf(PSTR("last DTC: %6d\n"), getlastDTC(false));
+  }
+  else
+  {
+    u8x8.printf(PSTR("next Lube: %4dm\n"), DistRemain);
+    u8x8.printf(PSTR("Tank: %8dml\n"), PersistenceData.tankRemain_µl / 1000);
+    u8x8.printf(PSTR("WiFi: %10s\n"), (WiFi.getMode() == WIFI_AP ? "AP" : WiFi.getMode() == WIFI_OFF ? "OFF"
+                                                                      : WiFi.getMode() == WIFI_STA   ? "CLIENT"
+                                                                                                     : "UNKNOWN"));
+    u8x8.printf(PSTR("Source: %8s\n"), SpeedSourceString[LubeConfig.SpeedSource]);
+    u8x8.printf("%s\n", WiFi.localIP().toString().c_str());
+  }
+  u8x8.refreshDisplay();
+}
+#endif
+
+void Button_Process()
+{
+
+#define BUTTON_ACTION_DELAY_TOGGLEMODE 500
+#define BUTTON_ACTION_DELAY_PURGE 3500
+#define BUTTON_ACTION_DELAY_WIFI 6500
+#define BUTTON_ACTION_DELAY_NOTHING 9500
+
+  typedef enum buttonAction_e
+  {
+    BTN_INACTIVE,
+    BTN_NOTHING,
+    BTN_TOGGLEMODE,
+    BTN_TOGGLEWIFI,
+    BTN_STARTPURGE
+  } buttonAction_t;
+
+  static uint32_t buttonTimestamp = 0;
+  static buttonAction_t buttonAction = BTN_INACTIVE;
+
+  if (digitalRead(GPIO_BUTTON) == LOW)
+  {
+
+    if (buttonTimestamp == 0)
+      buttonTimestamp = millis();
+
+    if (buttonTimestamp + BUTTON_ACTION_DELAY_NOTHING < millis())
+    {
+      LED_Process(1, CRGB::White);
+      buttonAction = BTN_NOTHING;
+    }
+    else if (buttonTimestamp + BUTTON_ACTION_DELAY_WIFI < millis())
+    {
+      LED_Process(1, CRGB::Yellow);
+      buttonAction = BTN_TOGGLEWIFI;
+    }
+    else if (buttonTimestamp + BUTTON_ACTION_DELAY_PURGE < millis())
+    {
+      LED_Process(1, CRGB::DeepPink);
+      buttonAction = BTN_STARTPURGE;
+    }
+    else if (buttonTimestamp + BUTTON_ACTION_DELAY_TOGGLEMODE < millis())
+    {
+      CRGB color = globals.systemStatus == sysStat_Normal ? CRGB::Blue : CRGB::Green;
+      LED_Process(1, color);
+      buttonAction = BTN_TOGGLEMODE;
+    }
+  }
+  else
+  {
+    if (buttonAction != BTN_INACTIVE)
+    {
+      switch (buttonAction)
+      {
+      case BTN_TOGGLEWIFI:
+        toggleWiFiAP();
+        debugV("Starting WiFi AP");
+        break;
+
+      case BTN_STARTPURGE:
+        globals.systemStatus = sysStat_Purge;
+        globals.purgePulses = LubeConfig.BleedingPulses;
+        debugV("Starting Purge");
+        break;
+
+      case BTN_TOGGLEMODE:
+        switch (globals.systemStatus)
+        {
+        case sysStat_Normal:
+          globals.systemStatus = sysStat_Rain;
+          globals.resumeStatus = sysStat_Rain;
+          break;
+
+        case sysStat_Rain:
+          globals.systemStatus = sysStat_Normal;
+          globals.resumeStatus = sysStat_Normal;
+          break;
+        default:
+          break;
+        }
+        debugV("Toggling Mode");
+        break;
+
+      case BTN_NOTHING:
+      default:
+        debugV("Nothing or invalid");
+        break;
+      }
+      LED_Process(2);
+    }
+    buttonAction = BTN_INACTIVE;
+    buttonTimestamp = 0;
+  }
+}
+
+void toggleWiFiAP(boolean shutdown)
+{
+  if (WiFi.getMode() != WIFI_OFF)
+  {
+    WiFi.mode(WIFI_OFF);
+    debugV("WiFi turned off");
+#ifdef FEATURE_ENABLE_WIFI_CLIENT
+    WiFiMaintainConnectionTicker.stop();
+#endif
+  }
+  else
+  {
+    WiFi.mode(WIFI_AP);
+    WiFi.softAPConfig(IPAddress(WIFI_AP_IP_GW), IPAddress(WIFI_AP_IP_GW), IPAddress(255, 255, 255, 0));
+    WiFi.softAP(globals.DeviceName, QUOTE(WIFI_AP_PASSWORD));
+#ifdef FEATURE_ENABLE_WIFI_CLIENT
+    WiFiMaintainConnectionTicker.stop();
+    debugV("WiFi AP started, stopped Maintain-Timer");
+#else
+    debugV("WiFi AP started");
+#endif
+  }
+}
+
+void SystemShutdown()
+{
+  static uint32_t shutdown_delay = 0;
+
+  if (shutdown_delay == 0)
+  {
+    shutdown_delay = millis() + SHUTDOWN_DELAY_MS;
+    Serial.printf("Shutdown requested - Restarting in %d seconds\n", SHUTDOWN_DELAY_MS / 1000);
+  }
+  if (shutdown_delay < millis())
+  {
+    StoreConfig_EEPROM();
+    StorePersistence_EEPROM();
+    ESP.restart();
+  }
+}
+
+uint32_t Process_Impulse_WheelSpeed()
+{
+  uint32_t add_milimeters;
+  // Calculate traveled Distance in mm
+  add_milimeters = (wheel_pulse * (LubeConfig.DistancePerRevolution_mm / LubeConfig.PulsePerRevolution));
+  wheel_pulse = 0;
+
+  return add_milimeters;
+}
+
+#ifdef FEATURE_ENABLE_REMOTE_DEBUG
+void RemoteDebug_ShowDTCs()
+{
+  char buff_timestamp[16]; // Format: DD-hh:mm:ss:xxx
+  char buff_active[9];
+
+  for (uint32_t i = 0; i < MAX_DTC_STORAGE; i++)
+  {
+    if (DTCStorage[i].Number < DTC_LAST_DTC)
+    {
+      sprintf(buff_timestamp, "%02d-%02d:%02d:%02d:%03d",
+              DTCStorage[i].timestamp / 86400000,    // Days
+              DTCStorage[i].timestamp / 360000 % 24, // Hours
+              DTCStorage[i].timestamp / 60000 % 60,  // Minutes
+              DTCStorage[i].timestamp / 1000 % 60,   // Seconds
+              DTCStorage[i].timestamp % 1000);       // milliseconds
+
+      if (DTCStorage[i].active == DTC_ACTIVE)
+        strcpy(buff_active, "active");
+      else if (DTCStorage[i].active == DTC_PREVIOUS)
+        strcpy(buff_active, "previous");
+      else
+        strcpy(buff_active, "none");
+
+      debugA("%s \t %6d \t %s", buff_timestamp, DTCStorage[i].Number, buff_active);
+    }
+  }
+}
+#endif

Software/src/rmtdbghelp.h

@@ -0,0 +1,13 @@
+const char helpCmd[] = "sysinfo     - System Info\r\n"
+                       "netinfo     - WiFi Info\r\n"
+                       "formatPDS   - Format Persistence EEPROM Data\r\n"
+                       "formatCFG   - Format Configuration EEPROM Data\r\n"
+                       "checkEE     - Check EEPROM with checksum\r\n"
+                       "dumpEE1k    - dump the first 1kb of EEPROM to Serial\r\n"
+                       "dumpEE      - dump the whole EPPROM to Serial\r\n"
+                       "resetPageEE - Reset the PersistenceData Page\r\n"
+                       "dumpCFG     - print Config struct\r\n"
+                       "dumpPDS     - print PersistanceStruct\r\n"
+                       "saveEE      - save EE-Data\r\n"
+                       "showdtc     - Show all DTCs\r\n"
+                       "dumpGlobals - print globals\r\n";

Software/src/sanitycheck.h

@@ -0,0 +1,37 @@
+#ifndef _SANITYCHECK_H_
+#define _SANITYCHECK_H_
+
+#ifndef PCB_REV
+    #error "You must define PCB_REV"
+#else
+    #if PCB_REV < 1 || PCB_REV > 4
+        #error "Unsupported PCB-Revision"
+    #endif
+
+    #if PCB_REV < 4 && defined(FEATURE_ENABLE_CAN)
+        #error "CAN-Feature unsupported with this PCB-Rev"
+    #endif
+    #if PCB_REV < 4 && defined(DFEATURE_ENABLE_GPS)
+        #error "CAN-Feature unsupported with this PCB-Rev"
+    #endif
+#endif
+
+#ifndef ADMIN_PASSWORD
+    #error "You need to define ADMIN_PASSWORD for OTA-Update"
+#endif
+
+#ifdef FEATURE_ENABLE_WIFI_CLIENT
+    #ifndef WIFI_PASSWORD_CLIENT
+        #error "You must define an WIFI_PASSWORD for Client-Mode"
+    #endif
+
+    #ifndef WIFI_SSID_CLIENT
+        #error "You must define an WIFI_SSID for Client-Mode"
+    #endif
+#endif
+
+#ifndef WIFI_AP_PASSWORD
+#error "You must define an WIFI_AP_PASSWORD for Standalone AP-Mode"
+#endif
+
+#endif //_SANITYCHECK_H_

Software/src/webui.cpp

@@ -0,0 +1,396 @@
+#include "webui.h"
+
+AsyncWebServer webServer(80);
+
+const char *PARAM_MESSAGE = "message";
+
+String processor(const String &var);
+void WebserverPOST_Callback(AsyncWebServerRequest *request);
+void WebserverNotFound_Callback(AsyncWebServerRequest *request);
+void Webserver_Callback(AsyncWebServerRequest *request);
+void WebserverFirmwareUpdate_Callback(AsyncWebServerRequest *request, const String &filename, size_t index, uint8_t *data, size_t len, bool final);
+void GetFlashVersion(char *buff, size_t buff_size);
+
+void initWebUI()
+{
+  if (!LittleFS.begin())
+  {
+    Serial.println("An Error has occurred while mounting LittleFS");
+    MaintainDTC(DTC_FLASHFS_ERROR, DTC_CRITICAL, true);
+    return;
+  }
+
+  GetFlashVersion(globals.FlashVersion, sizeof(globals.FlashVersion));
+
+  if (strcmp(globals.FlashVersion, QUOTE(FLASH_FS_VERSION)))
+  {
+    MaintainDTC(DTC_FLASHFS_VERSION_ERROR, DTC_WARN, true);
+  }
+
+  MDNS.begin(globals.DeviceName);
+  MDNS.addService("telnet", "tcp", 23);
+  MDNS.addService("http", "tcp", 80);
+
+  webServer.serveStatic("/static/", LittleFS, "/static/").setCacheControl("max-age=360000");
+  webServer.on("/", HTTP_GET, [](AsyncWebServerRequest *request)
+               { request->redirect("/index.htm"); });
+  webServer.onNotFound(WebserverNotFound_Callback);
+  webServer.on("/index.htm", HTTP_GET, Webserver_Callback);
+  webServer.on("/post.htm", HTTP_POST, WebserverPOST_Callback);
+  webServer.on(
+      "/doUpdate", HTTP_POST, [](AsyncWebServerRequest *request) {}, WebserverFirmwareUpdate_Callback);
+
+  webServer.begin();
+}
+
+String processor(const String &var)
+{
+  if (var == "TANK_REMAIN_CAPACITY")
+    return String((PersistenceData.tankRemain_µl / 10) / LubeConfig.tankCapacity_ml);
+  if (var == "LUBE_DISTANCE_NORMAL")
+    return String(LubeConfig.DistancePerLube_Default);
+  if (var == "LUBE_DISTANCE_RAIN")
+    return String(LubeConfig.DistancePerLube_Rain);
+  if (var == "TANK_CAPACITY")
+    return String(LubeConfig.tankCapacity_ml);
+  if (var == "AMOUNT_PER_DOSE")
+    return String(LubeConfig.amountPerDose_µl);
+  if (var == "TANK_REMIND")
+    return String(LubeConfig.TankRemindAtPercentage);
+  if (var == "PULSE_PER_REV")
+    return String(LubeConfig.PulsePerRevolution);
+  if (var == "TIRE_WIDTH_MM")
+    return String(LubeConfig.TireWidth_mm);
+  if (var == "TIRE_RATIO")
+    return String(LubeConfig.TireWidthHeight_Ratio);
+  if (var == "RIM_DIAMETER")
+    return String(LubeConfig.RimDiameter_Inch);
+  if (var == "DISTANCE_PER_REV")
+    return String(LubeConfig.DistancePerRevolution_mm);
+  if (var == "BLEEDING_PULSES")
+    return String(LubeConfig.BleedingPulses);
+  if (var == "SPEED_SOURCE")
+    return String(SpeedSourceString[LubeConfig.SpeedSource]);
+  if (var == "GPS_BAUD")
+#ifdef FEATURE_ENABLE_GPS
+    return String(GPSBaudRateString[LubeConfig.GPSBaudRate]);
+#else
+    return "Feature N/A";
+#endif
+  if (var == "CAN_SOURCE")
+#ifdef FEATURE_ENABLE_CAN
+    return String(CANSourceString[LubeConfig.CANSource]);
+#else
+    return "Feature N/A";
+#endif
+  if (var == "CONFIG_CHECKSUM")
+  {
+    char buffer[7];
+    sprintf(buffer, "0x%04X", LubeConfig.checksum);
+    return String(buffer);
+  }
+  if (var == "WRITE_CYCLE_COUNT")
+    return String(PersistenceData.writeCycleCounter);
+  if (var == "PERSISTENCE_MARKER")
+    return String(globals.eePersistanceAdress);
+  if (var == "TANK_REMAIN_UL")
+    return String(PersistenceData.tankRemain_µl);
+  if (var == "TRAVEL_DISTANCE_HIGHRES")
+    return String(PersistenceData.TravelDistance_highRes_mm);
+  if (var == "ODOMETER")
+    return String(PersistenceData.odometer);
+  if (var == "ODOMETER_M")
+    return String(PersistenceData.odometer_mm / 1000);
+  if (var == "PERSISTANCE_CHECKSUM")
+  {
+    char buffer[7];
+    sprintf(buffer, "0x%04X", PersistenceData.checksum);
+    return String(buffer);
+  }
+  if (var == "SHOW_IMPULSE_SETTINGS")
+    return LubeConfig.SpeedSource == SOURCE_IMPULSE ? "" : "hidden";
+  if (var == "SHOW_CAN_SETTINGS")
+#ifdef FEATURE_ENABLE_CAN
+    return LubeConfig.SpeedSource == SOURCE_CAN ? "" : "hidden";
+#else
+    return "hidden";
+#endif
+  if (var == "SHOW_GPS_SETTINGS")
+#ifdef FEATURE_ENABLE_GPS
+    return LubeConfig.SpeedSource == SOURCE_GPS ? "" : "hidden";
+#else
+    return "hidden";
+#endif
+  if (var == "SHOW_DTC_TABLE")
+    return globals.hasDTC ? "" : "hidden";
+
+  if (var == "DTC_TABLE")
+  {
+    String temp = "";
+    char buff_timestamp[16]; // Format: DD-hh:mm:ss:xxx
+
+    for (uint32_t i = 0; i < MAX_DTC_STORAGE; i++)
+    {
+      if (DTCStorage[i].Number < DTC_LAST_DTC)
+      {
+        sprintf(buff_timestamp, "%02d-%02d:%02d:%02d:%03d",
+                DTCStorage[i].timestamp / 86400000,    // Days
+                DTCStorage[i].timestamp / 360000 % 24, // Hours
+                DTCStorage[i].timestamp / 60000 % 60,  // Minutes
+                DTCStorage[i].timestamp / 1000 % 60,   // Seconds
+                DTCStorage[i].timestamp % 1000);       // milliseconds
+
+        temp = temp + "<tr data-dtc=" + String(DTCStorage[i].Number) + "><td>" + String(buff_timestamp);
+        temp = temp + "</td><td>" + String(DTCStorage[i].Number) + "</td><td>";
+        temp = temp + "<img src=static/img/";
+        switch (DTCStorage[i].severity)
+        {
+        case DTC_CRITICAL:
+          temp = temp + "critical";
+          break;
+        case DTC_WARN:
+          temp = temp + "warn";
+          break;
+        case DTC_INFO:
+          temp = temp + "info";
+          break;
+        }
+        temp = temp + ".png></td><td>";
+
+        if (DTCStorage[i].active == DTC_ACTIVE)
+          temp = temp + "active";
+        else if (DTCStorage[i].active == DTC_PREVIOUS)
+          temp = temp + "previous";
+        else
+          temp = temp + "none";
+
+        temp = temp + "</td></tr>";
+      }
+    }
+    return temp;
+  }
+
+  if (var == "SOURCE_SELECT_OPTIONS")
+  {
+    String temp;
+    for (uint32_t i = 0; i < SpeedSourceString_Elements; i++)
+    {
+      String selected = LubeConfig.SpeedSource == i ? " selected " : "";
+      temp = temp + "<option value=\"" + i + "\"" + selected + ">" + SpeedSourceString[i] + "</option>";
+    }
+    return temp;
+  }
+
+#ifdef FEATURE_ENABLE_CAN
+  if (var == "CANSOURCE_SELECT_OPTIONS")
+  {
+    String temp;
+    for (uint32_t i = 0; i < CANSourceString_Elements; i++)
+    {
+      String selected = LubeConfig.CANSource == i ? " selected " : "";
+      temp = temp + "<option value=\"" + i + "\"" + selected + ">" + CANSourceString[i] + "</option>";
+    }
+    return temp;
+  }
+#endif
+#ifdef FEATURE_EABLE_GPS
+  if (var == "GPSBAUD_SELECT_OPTIONS")
+  {
+    String temp;
+    for (uint32_t i = 0; i < GPSBaudRateString_Elements; i++)
+    {
+      String selected = LubeConfig.GPSBaudRate == i ? " selected " : "";
+      temp = temp + "<option value=\"" + i + "\"" + selected + ">" + GPSBaudRateString[i] + "</option>";
+    }
+    return temp;
+  }
+#endif
+
+  if (var == "SYSTEM_STATUS")
+    return String(globals.systemStatustxt);
+  if (var == "SW_VERSION")
+  {
+    return String(QUOTE(SW_VERSION));
+  }
+  if (var == "FS_VERSION")
+    return String(globals.FlashVersion);
+
+  if (var == "PLACEHOLDER")
+    return "placeholder";
+
+  return String();
+}
+
+void Webserver_Callback(AsyncWebServerRequest *request)
+{
+  request->send(LittleFS, "/index.htm", "text/html", false, processor);
+}
+
+void WebserverPOST_Callback(AsyncWebServerRequest *request)
+{
+  request->send(LittleFS, "/post.htm", "text/html", false, processor);
+
+  Serial.print("POST:\n");
+  int paramsNr = request->params();
+  for (int i = 0; i < paramsNr; i++)
+  {
+    AsyncWebParameter *p = request->getParam(i);
+    Serial.printf("%s : %s\n", p->name().c_str(), p->value().c_str());
+
+    // begin: POST Form Source Changed
+    if (p->name() == "sourceselect")
+    {
+      SpeedSource_t temp = (SpeedSource_t)p->value().toInt();
+      Serial.printf("temp: %d", temp);
+      Serial.printf("SpeedSource: %d", LubeConfig.SpeedSource);
+      if (LubeConfig.SpeedSource != temp)
+      {
+        LubeConfig.SpeedSource = temp;
+        globals.systemStatus = sysStat_Shutdown;
+      }
+    }
+    // end: POST Form Source Changed
+    // begin: POST Form Source Pulse Settings
+    if (p->name() == "tirewidth")
+      LubeConfig.TireWidth_mm = p->value().toInt();
+    if (p->name() == "tireratio")
+      LubeConfig.TireWidthHeight_Ratio = p->value().toInt();
+    if (p->name() == "tiredia")
+      LubeConfig.RimDiameter_Inch = p->value().toInt();
+    if (p->name() == "pulserev")
+      LubeConfig.PulsePerRevolution = p->value().toInt();
+    if (p->name() == "pulsesave")
+      globals.requestEEAction = EE_CFG_SAVE;
+      // end: POST Form Source Pulse Settings
+#ifdef FEATURE_EABLE_GPS
+    // begin: POST Form Source GPS Settings
+    if (p->name() == "gpsbaud")
+      LubeConfig.GPSBaudRate = (GPSBaudRate_t)p->value().toInt();
+    if (p->name() == "gpssave")
+      globals.requestEEAction = EE_CFG_SAVE;
+// end: POST Form Source GPS Settings
+#endif
+#ifdef FEATURE_EABLE_CAN
+    // begin: POST Form Source CAN Settings
+    if (p->name() == "cansource")
+      LubeConfig.CANSource = (CANSource_t)p->value().toInt();
+    if (p->name() == "cansave")
+      globals.requestEEAction = EE_CFG_SAVE;
+// end: POST Form Source CAN Settings
+#endif
+    // begin: POST Form Lubrication
+    if (p->name() == "lubedistancenormal")
+      LubeConfig.DistancePerLube_Default = p->value().toInt();
+    if (p->name() == "lubedistancerain")
+      LubeConfig.DistancePerLube_Rain = p->value().toInt();
+    if (p->name() == "lubesave")
+      globals.requestEEAction = EE_CFG_SAVE;
+    // end: POST Form Lubrication
+    // begin: POST Form Oiltank
+    if (p->name() == "tankcap")
+      LubeConfig.tankCapacity_ml = p->value().toInt();
+    if (p->name() == "tankwarn")
+      LubeConfig.TankRemindAtPercentage = p->value().toInt();
+    if (p->name() == "pumppulse")
+      LubeConfig.amountPerDose_µl = p->value().toInt();
+    if (p->name() == "oilsave")
+      globals.requestEEAction = EE_CFG_SAVE;
+    // end: POST Form Oiltank
+    // begin: POST Form Maintenance
+    if (p->name() == "purgepulse")
+      LubeConfig.BleedingPulses = p->value().toInt();
+    if (p->name() == "maintsave")
+      globals.requestEEAction = EE_CFG_SAVE;
+    if (p->name() == "resettank")
+    {
+      PersistenceData.tankRemain_µl = LubeConfig.tankCapacity_ml * 1000;
+      globals.requestEEAction = EE_PDS_SAVE;
+    }
+    if (p->name() == "reset_ee_btn")
+    {
+      if (request->hasParam("reset_ee_pds", true))
+      {
+        AsyncWebParameter *param = request->getParam("reset_ee_pds", true);
+        if (param->value() == "on")
+          globals.requestEEAction = globals.requestEEAction == EE_CFG_FORMAT ? EE_FORMAT_ALL : EE_PDS_FORMAT;
+      }
+      if (request->hasParam("reset_ee_cfg", true))
+      {
+        AsyncWebParameter *param = request->getParam("reset_ee_cfg", true);
+        if (param->value() == "on")
+          globals.requestEEAction = globals.requestEEAction == EE_PDS_FORMAT ? EE_FORMAT_ALL : EE_CFG_FORMAT;
+      }
+    }
+    if (p->name() == "purgenow")
+    {
+      globals.systemStatus = sysStat_Purge;
+      globals.purgePulses = LubeConfig.BleedingPulses;
+    }
+    // end: POST Form Maintenance
+  }
+}
+
+void WebserverNotFound_Callback(AsyncWebServerRequest *request)
+{
+  request->send(404, "text/html", "Not found");
+}
+
+void GetFlashVersion(char *buff, size_t buff_size)
+{
+  File this_file = LittleFS.open("version", "r");
+  if (!this_file)
+  { // failed to open the file, retrn empty result
+    buff[0] = '\0';
+    return;
+  }
+  if (this_file.available())
+  {
+    int bytes_read;
+    bytes_read = this_file.readBytesUntil('\r', buff, buff_size - 1);
+    buff[bytes_read] = '\0';
+  }
+  this_file.close();
+}
+
+void WebserverFirmwareUpdate_Callback(AsyncWebServerRequest *request, const String &filename, size_t index, uint8_t *data, size_t len, bool final)
+{
+
+  if (!index)
+  {
+    Serial.println("Update");
+    size_t content_len = request->contentLength();
+    int cmd = (filename.indexOf(".fs") > -1) ? U_FS : U_FLASH;
+    Update.runAsync(true);
+    if (!Update.begin(content_len, cmd))
+    {
+      Update.printError(Serial);
+    }
+  }
+
+  if (Update.write(data, len) != len)
+  {
+    Update.printError(Serial);
+  }
+  else
+  {
+    Serial.printf("Progress: %d%%\n", (Update.progress() * 100) / Update.size());
+  }
+
+  if (final)
+  {
+    AsyncWebServerResponse *response = request->beginResponse(302, "text/plain", "Please wait while the device reboots");
+    response->addHeader("Refresh", "20");
+    response->addHeader("Location", "/");
+    request->send(response);
+    if (!Update.end(true))
+    {
+      Update.printError(Serial);
+    }
+    else
+    {
+      Serial.println("Update complete");
+      Serial.flush();
+      globals.systemStatus = sysStat_Shutdown;
+    }
+  }
+}

Software/src/webui.h

@@ -0,0 +1,19 @@
+#ifndef _WEBUI_H_
+#define _WEBUI_H_
+
+#include <Arduino.h>
+#include <FS.h>
+#include <LittleFS.h>
+#include <ESPAsyncTCP.h>
+#include <ESPAsyncWebServer.h>
+#include <Updater.h>
+#include <ESP8266mDNS.h>
+
+#include "config.h"
+#include "globals.h"
+#include "dtc.h"
+#include "common.h"
+
+void initWebUI();
+
+#endif

Software/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

Software/wifi_credentials.example.ini

@@ -0,0 +1,5 @@
+[wifi_cred]
+admin_password = adminpass
+wifi_ap_password = wifiappass
+wifi_ssid_client = wifi-ssid
+wifi_password_client = wifi-pass