added CAN-Debug-Message

Software/include/can.h

@@ -7,6 +7,7 @@
 #include "common.h"
 #include "globals.h"
 #include "dtc.h"
+#include "debugger.h"
 
 struct can_frame
 {
@@ -16,6 +17,7 @@ struct can_frame
 };
 
 void Init_CAN();
+void CAN_Process();
 uint32_t Process_CAN_WheelSpeed();
 
 #endif

Software/include/lubeapp.h

@@ -7,6 +7,7 @@
 #include "common.h"
 #include "globals.h"
 #include "dtc.h"
+#include "debugger.h"
 
 void RunLubeApp(uint32_t add_milimeters);
 void LubePulse();

Software/include/sanitycheck.h

@@ -16,6 +16,12 @@
     #endif
 #endif
 
+#ifdef CAN_DEBUG_MESSAGE
+    #ifndef FEATURE_ENABLE_CAN
+        #error "You cannot enable CAN-Debug-Message without FEATURE_ENABLE_CAN"
+    #endif
+#endif
+
 #ifndef ADMIN_PASSWORD
     #error "You need to define ADMIN_PASSWORD for OTA-Update"
 #endif

Software/src/can.cpp

@@ -2,6 +2,9 @@
 #include "can.h"
 
 MCP_CAN CAN0(GPIO_CS_CAN);
+#ifdef CAN_DEBUG_MESSAGE
+void sendCANDebugMessage();
+#endif
 
 void Init_CAN()
 {
@@ -16,6 +19,17 @@ void Init_CAN()
     CAN0.setMode(MCP_NORMAL);
 }
 
+void CAN_Process()
+{
+    static uint32_t previousMillis = 0;
+
+    if (millis() - previousMillis >= 100)
+    {
+        sendCANDebugMessage();
+        previousMillis = millis();
+    }
+}
+
 uint32_t Process_CAN_WheelSpeed()
 {
 #define FACTOR_RWP_KMH_890ADV 18 // Divider to convert Raw Data to km/h
@@ -46,4 +60,55 @@ uint32_t Process_CAN_WheelSpeed()
 
     return milimeters_to_add;
 }
+
+#ifdef CAN_DEBUG_MESSAGE
+void sendCANDebugMessage()
+{
+#define MAX_DEBUG_MULTIPLEXER 6
+    static uint8_t debugMultiplexer = 0;
+    byte data[8] = {debugMultiplexer, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+    uint32_t millisValue = millis();
+
+    switch (debugMultiplexer)
+    {
+    case 0:
+        memcpy(&data[1], &millisValue, sizeof(millisValue));
+        memcpy(&data[5], &globals.purgePulses, sizeof(globals.purgePulses));
+        break;
+    case 1:
+        data[1] = (uint8_t)globals.systemStatus;
+        data[2] = (uint8_t)globals.resumeStatus;
+        data[3] = (uint8_t)globals.requestEEAction;
+        data[4] = globals.TankPercentage;
+        data[5] = (0x01 & globals.hasDTC) | ((0x01 & globals.measurementActive) << 1);
+        break;
+    case 2:
+        memcpy(&data[1], &globals.eePersistanceAdress, sizeof(globals.eePersistanceAdress));
+        memcpy(&data[3], &PersistenceData.tankRemain_microL, sizeof(PersistenceData.tankRemain_microL));
+        break;
+    case 3:
+        memcpy(&data[1], &PersistenceData.writeCycleCounter, sizeof(PersistenceData.writeCycleCounter));
+        memcpy(&data[3], &PersistenceData.TravelDistance_highRes_mm, sizeof(PersistenceData.TravelDistance_highRes_mm));
+        break;
+    case 4:
+        memcpy(&data[1], &PersistenceData.odometer_mm, sizeof(PersistenceData.odometer_mm));
+        break;
+    case 5:
+        memcpy(&data[1], &PersistenceData.odometer, sizeof(PersistenceData.odometer));
+        break;
+    case 6:
+        memcpy(&data[1], &PersistenceData.checksum, sizeof(PersistenceData.checksum));
+        break;
+    default:
+        break;
+    }
+
+    debugMultiplexer++;
+    debugMultiplexer = debugMultiplexer > MAX_DEBUG_MULTIPLEXER ? 0 : debugMultiplexer;
+
+    byte sndStat = CAN0.sendMsgBuf(0x7FF, 0, 8, data);
+    if (sndStat != CAN_OK)
+        Debug_pushMessage("failed sending CAN-DbgMsg: %d\n", sndStat);
+}
+#endif
 #endif

Software/src/main.cpp

@@ -96,31 +96,19 @@ void setup()
 #endif
   leds.begin();
   Serial.print("\nLED-Init done");
-  switch (LubeConfig.SpeedSource)
-  {
-  case SOURCE_IMPULSE:
-    pinMode(GPIO_TRIGGER, INPUT_PULLUP);
-    attachInterrupt(digitalPinToInterrupt(GPIO_TRIGGER), trigger_ISR, FALLING);
-    break;
-#ifdef FEATURE_ENABLE_GPS
-  case SOURCE_GPS:
-    Init_GPS();
-    break;
-#endif
-#ifdef FEATURE_ENABLE_TIMER
-  case SOURCE_TIME:
 
-    break;
+  pinMode(GPIO_TRIGGER, INPUT_PULLUP);
+  attachInterrupt(digitalPinToInterrupt(GPIO_TRIGGER), trigger_ISR, FALLING);
+  Serial.print("\nPulse-Input Init done");
+#ifdef FEATURE_ENABLE_GPS
+  Init_GPS();
+  Serial.print("\nGPS-Init done");
 #endif
 #ifdef FEATURE_ENABLE_CAN
-  case SOURCE_CAN:
+  Init_CAN();
-    Init_CAN();
+  Serial.print("\nCAN-Init done");
-    break;
 #endif
-  default:
+
-    Debug_pushMessage("Source Setting N/A");
-    break;
-  }
   Serial.print("\nSource-Init done");
   pinMode(GPIO_BUTTON, INPUT_PULLUP);
   pinMode(GPIO_PUMP, OUTPUT);
@@ -193,6 +181,9 @@ void loop()
   RunLubeApp(wheelDistance);
 #ifdef FEATURE_ENABLE_OLED
   Display_Process();
+#endif
+#ifdef FEATURE_ENABLE_CAN
+  CAN_Process();
 #endif
   Button_Process();
   LED_Process();