Airsoft/DarkEmergency-Timer
1
0
Fork 0
Code Issues Pull Requests Releases 9 Wiki Activity

Compare commits

base: Airsoft:ab2ab0e0c186138ee676017b2654701192ef17b8
Branches Tags
Airsoft:master
Airsoft:1.08 Airsoft:1.07 Airsoft:1.06 Airsoft:1.05 Airsoft:1.04_RC1 Airsoft:1.03 Airsoft:1.02 Airsoft:PCB_Rev_1.0 Airsoft:Release-1.0
..
compare: Airsoft:Release-1.0
Branches Tags
Airsoft:master
Airsoft:1.08 Airsoft:1.07 Airsoft:1.06 Airsoft:1.05 Airsoft:1.04_RC1 Airsoft:1.03 Airsoft:1.02 Airsoft:PCB_Rev_1.0 Airsoft:Release-1.0

14 Commits
ab2ab0e0c1 ... Release-1.

Author SHA1 Message Date
Marcel Peterkau
b147d8dee8 changed upload-params 2022-05-15 22:52:50 +02:00
Marcel Peterkau
31b5353158 added ButtonCombo to activate WiFi AP 2022-05-15 22:52:24 +02:00
Marcel Peterkau
4faa0a997b changed IP and deactivated Captive 2022-05-15 22:51:42 +02:00
Marcel Peterkau
cadaf60087 commands from WebUI no longer CaseSensitive 2022-05-15 22:48:25 +02:00
Marcel Peterkau
b874c7dd30 disabled WiFi-Client and swaped Displays for BatLo 2022-05-15 16:46:48 +02:00
Marcel Peterkau
c78f3b9d5b EEPROM changes 2022-05-15 16:37:34 +02:00
Marcel Peterkau
8d271e9678 fixed Warning (for Real this time) 2022-04-16 17:36:05 +02:00
Marcel Peterkau
5e6f4b6a84 Low Bat Information Display tuned 2022-04-16 17:14:04 +02:00
Marcel Peterkau
2a101b7b88 OTA Info on 7Seg instead Serial 2022-04-16 17:13:46 +02:00
Marcel Peterkau
bf612ee193 fixed Warning 2022-04-16 17:13:13 +02:00
Marcel Peterkau
b2f52c9767 small Menu adjustment 2022-04-16 16:14:05 +02:00
Marcel Peterkau
f0b490760e More webUI Adjustments, started with settings-Page 2022-04-16 10:17:06 +02:00
Marcel Peterkau
798c40719e WebUI-System copied from ChainLube 2022-04-14 22:48:39 +02:00
Marcel Peterkau
7f0c3e74f6 massive takeover of Firmware-parts from ChainLube 2022-04-14 22:48:11 +02:00
148 changed files with 7487 additions and 60769 deletions
Expand all files Collapse all files

6
.gitignore vendored
View File

@@ -1 +1,5 @@
Bestellung.xlsx
.pio
.vscode/.browse.c_cpp.db*
.vscode/c_cpp_properties.json
.vscode/launch.json
.vscode/ipch

0
Software/.vscode/extensions.json → .vscode/extensions.json vendored
View File

BIN
Documentation/Datasheets/E220-900T22D_UserManual_EN_v1.0.pdf
View File

Binary file not shown.

BIN
Documentation/Pinout_UART_LoRa.png
View File

Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 53 KiB

31
Hardware/.gitignore vendored
View File

@@ -1,31 +0,0 @@
# For PCBs designed using KiCad: http://www.kicad-pcb.org/
# Format documentation: http://kicad-pcb.org/help/file-formats/
# Temporary files
*.000
*.bak
*.bck
*.kicad_pcb-bak
*.kicad_sch-bak
*.kicad_prl
*.sch-bak
*~
_autosave-*
*.tmp
*-save.pro
*-save.kicad_pcb
fp-info-cache
# Netlist files (exported from Eeschema)
*.net
# Autorouter files (exported from Pcbnew)
*.dsn
*.ses
# Exported BOM files
*.xml
*.csv
gerber/
*-backups/

BIN
Hardware/BOM DE-Timer HW Rev.1.0.xlsx
View File

Binary file not shown.

19592
Hardware/DE-Timer.kicad_pcb
View File

File diff suppressed because it is too large Load Diff

437
Hardware/DE-Timer.kicad_pro
View File

@@ -1,437 +0,0 @@
{
"board": {
"design_settings": {
"defaults": {
"board_outline_line_width": 0.09999999999999999,
"copper_line_width": 0.19999999999999998,
"copper_text_italic": false,
"copper_text_size_h": 1.5,
"copper_text_size_v": 1.5,
"copper_text_thickness": 0.3,
"copper_text_upright": false,
"courtyard_line_width": 0.049999999999999996,
"dimension_precision": 4,
"dimension_units": 3,
"dimensions": {
"arrow_length": 1270000,
"extension_offset": 500000,
"keep_text_aligned": true,
"suppress_zeroes": false,
"text_position": 0,
"units_format": 1
},
"fab_line_width": 0.09999999999999999,
"fab_text_italic": false,
"fab_text_size_h": 1.0,
"fab_text_size_v": 1.0,
"fab_text_thickness": 0.15,
"fab_text_upright": false,
"other_line_width": 0.15,
"other_text_italic": false,
"other_text_size_h": 1.0,
"other_text_size_v": 1.0,
"other_text_thickness": 0.15,
"other_text_upright": false,
"pads": {
"drill": 3.0,
"height": 4.0,
"width": 4.0
},
"silk_line_width": 0.15,
"silk_text_italic": false,
"silk_text_size_h": 1.0,
"silk_text_size_v": 1.0,
"silk_text_thickness": 0.15,
"silk_text_upright": false,
"zones": {
"45_degree_only": false,
"min_clearance": 0.127
}
},
"diff_pair_dimensions": [
{
"gap": 0.0,
"via_gap": 0.0,
"width": 0.0
}
],
"drc_exclusions": [],
"meta": {
"version": 2
},
"rule_severities": {
"annular_width": "error",
"clearance": "error",
"copper_edge_clearance": "error",
"courtyards_overlap": "error",
"diff_pair_gap_out_of_range": "error",
"diff_pair_uncoupled_length_too_long": "error",
"drill_out_of_range": "error",
"duplicate_footprints": "warning",
"extra_footprint": "warning",
"footprint_type_mismatch": "error",
"hole_clearance": "error",
"hole_near_hole": "error",
"invalid_outline": "error",
"item_on_disabled_layer": "error",
"items_not_allowed": "error",
"length_out_of_range": "error",
"malformed_courtyard": "error",
"microvia_drill_out_of_range": "error",
"missing_courtyard": "ignore",
"missing_footprint": "warning",
"net_conflict": "warning",
"npth_inside_courtyard": "ignore",
"padstack": "error",
"pth_inside_courtyard": "ignore",
"shorting_items": "error",
"silk_over_copper": "warning",
"silk_overlap": "warning",
"skew_out_of_range": "error",
"through_hole_pad_without_hole": "error",
"too_many_vias": "error",
"track_dangling": "warning",
"track_width": "error",
"tracks_crossing": "error",
"unconnected_items": "error",
"unresolved_variable": "error",
"via_dangling": "warning",
"zone_has_empty_net": "error",
"zones_intersect": "error"
},
"rules": {
"allow_blind_buried_vias": false,
"allow_microvias": false,
"max_error": 0.005,
"min_clearance": 0.0,
"min_copper_edge_clearance": 0.0,
"min_hole_clearance": 0.25,
"min_hole_to_hole": 0.25,
"min_microvia_diameter": 0.19999999999999998,
"min_microvia_drill": 0.09999999999999999,
"min_silk_clearance": 0.0,
"min_through_hole_diameter": 0.3,
"min_track_width": 0.19999999999999998,
"min_via_annular_width": 0.049999999999999996,
"min_via_diameter": 0.39999999999999997,
"solder_mask_clearance": 0.0,
"solder_mask_min_width": 0.0,
"use_height_for_length_calcs": true
},
"track_widths": [
0.0,
0.635,
1.27,
2.54,
5.08
],
"via_dimensions": [
{
"diameter": 0.0,
"drill": 0.0
}
],
"zones_allow_external_fillets": false,
"zones_use_no_outline": true
},
"layer_presets": []
},
"boards": [],
"cvpcb": {
"equivalence_files": []
},
"erc": {
"erc_exclusions": [],
"meta": {
"version": 0
},
"pin_map": [
[
0,
0,
0,
0,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
2,
0,
1,
0,
0,
1,
0,
2,
2,
2,
2
],
[
0,
0,
0,
0,
0,
0,
1,
0,
1,
0,
1,
2
],
[
0,
1,
0,
0,
0,
0,
1,
1,
2,
1,
1,
2
],
[
0,
0,
0,
0,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
2
],
[
1,
1,
1,
1,
1,
0,
1,
1,
1,
1,
1,
2
],
[
0,
0,
0,
1,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
2,
1,
2,
0,
0,
1,
0,
2,
2,
2,
2
],
[
0,
2,
0,
1,
0,
0,
1,
0,
2,
0,
0,
2
],
[
0,
2,
1,
1,
0,
0,
1,
0,
2,
0,
0,
2
],
[
2,
2,
2,
2,
2,
2,
2,
2,
2,
2,
2,
2
]
],
"rule_severities": {
"bus_definition_conflict": "error",
"bus_entry_needed": "error",
"bus_label_syntax": "error",
"bus_to_bus_conflict": "error",
"bus_to_net_conflict": "error",
"different_unit_footprint": "error",
"different_unit_net": "error",
"duplicate_reference": "error",
"duplicate_sheet_names": "error",
"extra_units": "error",
"global_label_dangling": "warning",
"hier_label_mismatch": "error",
"label_dangling": "error",
"lib_symbol_issues": "warning",
"multiple_net_names": "warning",
"net_not_bus_member": "warning",
"no_connect_connected": "warning",
"no_connect_dangling": "warning",
"pin_not_connected": "error",
"pin_not_driven": "error",
"pin_to_pin": "warning",
"power_pin_not_driven": "error",
"similar_labels": "warning",
"unannotated": "error",
"unit_value_mismatch": "error",
"unresolved_variable": "error",
"wire_dangling": "error"
}
},
"libraries": {
"pinned_footprint_libs": [],
"pinned_symbol_libs": []
},
"meta": {
"filename": "DE-Timer.kicad_pro",
"version": 1
},
"net_settings": {
"classes": [
{
"bus_width": 12.0,
"clearance": 0.1,
"diff_pair_gap": 0.25,
"diff_pair_via_gap": 0.25,
"diff_pair_width": 0.2,
"line_style": 0,
"microvia_diameter": 0.3,
"microvia_drill": 0.1,
"name": "Default",
"pcb_color": "rgba(0, 0, 0, 0.000)",
"schematic_color": "rgba(0, 0, 0, 0.000)",
"track_width": 0.25,
"via_diameter": 0.8,
"via_drill": 0.4,
"wire_width": 6.0
}
],
"meta": {
"version": 2
},
"net_colors": null
},
"pcbnew": {
"last_paths": {
"gencad": "",
"idf": "",
"netlist": "",
"specctra_dsn": "",
"step": "DE-Timer.step",
"vrml": ""
},
"page_layout_descr_file": ""
},
"schematic": {
"annotate_start_num": 0,
"drawing": {
"default_line_thickness": 6.0,
"default_text_size": 50.0,
"field_names": [],
"intersheets_ref_own_page": false,
"intersheets_ref_prefix": "",
"intersheets_ref_short": false,
"intersheets_ref_show": false,
"intersheets_ref_suffix": "",
"junction_size_choice": 3,
"label_size_ratio": 0.375,
"pin_symbol_size": 25.0,
"text_offset_ratio": 0.15
},
"legacy_lib_dir": "",
"legacy_lib_list": [],
"meta": {
"version": 1
},
"net_format_name": "",
"ngspice": {
"fix_include_paths": true,
"fix_passive_vals": false,
"meta": {
"version": 0
},
"model_mode": 0,
"workbook_filename": ""
},
"page_layout_descr_file": "",
"plot_directory": "",
"spice_adjust_passive_values": false,
"spice_external_command": "spice \"%I\"",
"subpart_first_id": 65,
"subpart_id_separator": 0
},
"sheets": [
[
"1a6d2848-e78e-49fe-8978-e1890f07836f",
""
]
],
"text_variables": {}
}

3267
Hardware/DE-Timer.kicad_sch
View File

File diff suppressed because it is too large Load Diff

90
Hardware/Ebyte_RF.kicad_sym
View File

@@ -1,90 +0,0 @@
(kicad_symbol_lib (version 20211014) (generator kicad_symbol_editor)
(symbol "E220-900T22D" (in_bom yes) (on_board yes)
(property "Reference" "U" (id 0) (at 7.62 1.27 0)
(effects (font (size 1.27 1.27)))
)
(property "Value" "E220-900T22D" (id 1) (at 13.97 -1.27 0)
(effects (font (size 1.27 1.27)))
)
(property "Footprint" "" (id 2) (at 0 0 0)
(effects (font (size 1.27 1.27)) hide)
)
(property "Datasheet" "" (id 3) (at 0 0 0)
(effects (font (size 1.27 1.27)) hide)
)
(symbol "E220-900T22D_0_1"
(rectangle (start -5.08 -2.54) (end 12.7 -20.32)
(stroke (width 0) (type default) (color 0 0 0 0))
(fill (type background))
)
(polyline
(pts
(xy 15.24 -15.24)
(xy 13.97 -13.97)
)
(stroke (width 0) (type default) (color 0 0 0 0))
(fill (type none))
)
(polyline
(pts
(xy 15.24 -15.24)
(xy 15.24 -13.97)
)
(stroke (width 0) (type default) (color 0 0 0 0))
(fill (type none))
)
(polyline
(pts
(xy 12.7 -17.78)
(xy 15.24 -17.78)
(xy 15.24 -15.24)
(xy 16.51 -13.97)
)
(stroke (width 0) (type default) (color 0 0 0 0))
(fill (type none))
)
)
(symbol "E220-900T22D_1_1"
(pin input line (at -7.62 -6.35 0) (length 2.54)
(name "M0" (effects (font (size 1.27 1.27))))
(number "1" (effects (font (size 1.27 1.27))))
)
(pin unspecified line (at 10.16 -22.86 90) (length 2.54)
(name "mount" (effects (font (size 1.27 1.27))))
(number "10" (effects (font (size 1.27 1.27))))
)
(pin input line (at -7.62 -8.89 0) (length 2.54)
(name "M1" (effects (font (size 1.27 1.27))))
(number "2" (effects (font (size 1.27 1.27))))
)
(pin input line (at -7.62 -11.43 0) (length 2.54)
(name "RXD" (effects (font (size 1.27 1.27))))
(number "3" (effects (font (size 1.27 1.27))))
)
(pin output line (at -7.62 -13.97 0) (length 2.54)
(name "TXD" (effects (font (size 1.27 1.27))))
(number "4" (effects (font (size 1.27 1.27))))
)
(pin output line (at -7.62 -16.51 0) (length 2.54)
(name "AUX" (effects (font (size 1.27 1.27))))
(number "5" (effects (font (size 1.27 1.27))))
)
(pin power_in line (at 3.81 0 270) (length 2.54)
(name "VCC" (effects (font (size 1.27 1.27))))
(number "6" (effects (font (size 1.27 1.27))))
)
(pin power_in line (at 1.27 -22.86 90) (length 2.54)
(name "GND" (effects (font (size 1.27 1.27))))
(number "7" (effects (font (size 1.27 1.27))))
)
(pin unspecified line (at 5.08 -22.86 90) (length 2.54)
(name "mount" (effects (font (size 1.27 1.27))))
(number "8" (effects (font (size 1.27 1.27))))
)
(pin unspecified line (at 7.62 -22.86 90) (length 2.54)
(name "mount" (effects (font (size 1.27 1.27))))
(number "9" (effects (font (size 1.27 1.27))))
)
)
)
)

25
Hardware/Ebyte_RF.pretty/E220-900T22D.kicad_mod
View File

@@ -1,25 +0,0 @@
(footprint "E220-900T22D" (version 20211014) (generator pcbnew)
(layer "F.Cu")
(tedit 62E17D77)
(attr through_hole)
(fp_text reference "REF**" (at 0 -12.93 unlocked) (layer "F.SilkS")
(effects (font (size 1 1) (thickness 0.15)))
(tstamp 4c9fdea7-ba0c-45cc-8f66-240980c37d5c)
)
(fp_text value "E220-900T22D" (at 0 -11.43 unlocked) (layer "F.Fab")
(effects (font (size 1 1) (thickness 0.15)))
(tstamp c58960d9-4cac-4036-ad2e-1aef26946dae)
)
(fp_rect (start 18 2) (end 30.5 8.2) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 477892a1-722e-4cda-bb6c-fcdb8ba5f93e))
(fp_rect (start -18 -10.5) (end 18 10.5) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 563c12e4-8f8c-446c-a11f-94f5aa93b994))
(pad "1" thru_hole oval (at -16.5 7.62) (size 2.54 1.524) (drill 0.762) (layers *.Cu *.Mask) (tstamp cbc539d2-6a10-4052-9b7a-f10326dcac67))
(pad "2" thru_hole oval (at -16.5 5.08) (size 2.54 1.524) (drill 0.762) (layers *.Cu *.Mask) (tstamp 936e2ca6-11ae-4f42-9128-52bb329f3d21))
(pad "3" thru_hole oval (at -16.5 2.54) (size 2.54 1.524) (drill 0.762) (layers *.Cu *.Mask) (tstamp 0c30a4be-5679-499f-8c5b-5f3024f9d6cf))
(pad "4" thru_hole oval (at -16.5 0) (size 2.54 1.524) (drill 0.762) (layers *.Cu *.Mask) (tstamp 2f3deced-880d-4075-a81b-95c62da5b94d))
(pad "5" thru_hole oval (at -16.5 -2.54) (size 2.54 1.524) (drill 0.762) (layers *.Cu *.Mask) (tstamp 7e08f2a4-63d6-468b-bd8b-ec607077e023))
(pad "6" thru_hole oval (at -16.5 -5.08) (size 2.54 1.524) (drill 0.762) (layers *.Cu *.Mask) (tstamp a06e8e78-f567-42e6-b645-013b1073ca31))
(pad "7" thru_hole oval (at -16.5 -7.62) (size 2.54 1.524) (drill 0.762) (layers *.Cu *.Mask) (tstamp 53c85970-3e21-4fae-a84f-721cfc0513b5))
(pad "8" thru_hole oval (at 15 -1.92) (size 2.54 1.524) (drill 0.762) (layers *.Cu *.Mask) (tstamp 065b9982-55f2-4822-977e-07e8a06e7b35))
(pad "9" thru_hole oval (at 15 -4.46) (size 2.54 1.524) (drill 0.762) (layers *.Cu *.Mask) (tstamp 70fb572d-d5ec-41e7-9482-63d4578b4f47))
(pad "10" thru_hole oval (at 15 -7) (size 2.54 1.524) (drill 0.762) (layers *.Cu *.Mask) (tstamp 0f31f11f-c374-4640-b9a4-07bbdba8d354))
)

3
Hardware/fp-lib-table
View File

@@ -1,3 +0,0 @@
(fp_lib_table
(lib (name "Ebyte_RF")(type "KiCad")(uri "${KIPRJMOD}/Ebyte_RF.pretty")(options "")(descr ""))
)

3
Hardware/sym-lib-table
View File

@@ -1,3 +0,0 @@
(sym_lib_table
(lib (name "Ebyte_RF")(type "KiCad")(uri "${KIPRJMOD}/Ebyte_RF.kicad_sym")(options "")(descr ""))
)

8
Software/.gitignore vendored
View File

@@ -1,8 +0,0 @@
data/
.pio
.vscode/.browse.c_cpp.db*
.vscode/c_cpp_properties.json
.vscode/launch.json
.vscode/ipch
wifi_credentials.ini
__pycache__

0
Software/README.md
View File

145
Software/codegen/dtcs.py
View File

@@ -1,145 +0,0 @@
import os
import time
from jinja2 import Environment, FileSystemLoader
import json
import sys
import filechecksum as fcs
def build_dtcs():
# Pfad zur Eingabedatei und Ausgabedatei
input_file = "src/dtc_defs.txt"
output_file = "include/dtc_defs.h"
json_output_file = "data_src/static/dtc_table.json"
# Überprüfen, ob das Verzeichnis existiert, andernfalls erstellen
json_output_dir = os.path.dirname(json_output_file)
if not os.path.exists(json_output_dir):
os.makedirs(json_output_dir)
# Mehrdimensionales Array zum Speichern der Zeilen aus der Eingabedatei
dtc_lines = []
# Lesen und analysieren der Eingabedatei
with open(input_file, "r", encoding="utf-8") as f:
for line in f:
line = line.strip()
if not line or line.startswith("#"):
continue
parts = line.split(";")
if len(parts) == 5:
num, dtc_name, dtc_severity, title, description = [part.strip() for part in parts]
dtc_lines.append([int(num), dtc_name, dtc_severity, title, description])
# Überprüfen auf Duplikate in den DTC-Nummern und DTC-Namen
num_set = set()
dtc_name_set = set()
duplicates = []
for line in dtc_lines:
num, dtc_name, _, _, _ = line
if num in num_set:
duplicates.append(f"DTC-Nummer {num} ist ein Duplikat.")
else:
num_set.add(num)
if dtc_name in dtc_name_set:
duplicates.append(f"DTC-Name '{dtc_name}' ist ein Duplikat.")
else:
dtc_name_set.add(dtc_name)
if duplicates:
for duplicate in duplicates:
print(f"Fehler: {duplicate}")
raise ValueError("Duplicate DTC Data detected")
# Suchen nach DTC_NO_DTC und DTC_LAST_DTC
dtc_no_dtc_added = False
dtc_last_dtc_line = None
for line in dtc_lines:
_, dtc_name, _, _, _ = line
if dtc_name == "DTC_NO_DTC":
dtc_no_dtc_added = True
elif dtc_name == "DTC_LAST_DTC":
dtc_last_dtc_line = line
# Einen DTC für DTC_NO_DTC hinzufügen (wenn nicht vorhanden)
if not dtc_no_dtc_added:
dtc_lines.insert(0, [0, "DTC_NO_DTC", "DTC_NONE", "No Error", "No Error"])
# Falls DTC_LAST_DTC existiert, lösche es
if dtc_last_dtc_line:
dtc_lines.remove(dtc_last_dtc_line)
# Einen DTC für DTC_LAST_DTC hinzufügen (mit der höchsten Nummer)
if dtc_lines:
highest_num = max([line[0] for line in dtc_lines])
else:
highest_num = 0
dtc_lines.append([highest_num + 1, "DTC_LAST_DTC", "DTC_NONE", "Last Error", "Last Error"])
# Sortieren der Zeilen nach der Nummer aufsteigend
dtc_lines.sort(key=lambda x: x[0])
checksum = fcs.calculate_checksum(dtc_lines)
timestamp = int(time.time())
if fcs.read_and_compare_checksum(output_file, checksum):
print("Keine Änderungen im DTC-Headerfile erforderlich.")
else:
# DTC_NAME_CONSTANT-Makros initialisieren
dtc_macros = []
dtc_structs = []
# Verarbeiten der sortierten Zeilen
for i, line in enumerate(dtc_lines):
num, dtc_name, dtc_severity, title, description = line
dtc_macros.append(f"#define {dtc_name:<30} {num}")
comma = "," if i < len(dtc_lines) - 1 else " "
dtc_structs.append(f" {{ {dtc_name:<30}, {dtc_severity:<12} }}{comma} // {description}")
env = Environment(loader=FileSystemLoader('codegen/templates', encoding='utf-8'))
# Lade das Jinja2-Template aus der Datei
template = env.get_template('dtc_defs.h.j2')
# Erstelle ein Context-Dictionary mit den erforderlichen Daten
context = {
'timestamp_unix': timestamp,
'timestamp' : time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(timestamp)),
'date' : time.strftime('%d.%m.%Y', time.localtime(timestamp)),
'dtc_macros': dtc_macros, # Übergebe die dtc_macros-Liste direkt
'dtc_structs': dtc_structs, # Übergebe die dtc_structs-Liste direkt
'checksum' : checksum
}
# Rendere das Template mit den Werten und erhalte den Header-Text
header_text = template.render(context)
# Schreibe den generierten Header-Text in die Header-Datei
with open(output_file, "w", encoding='utf-8') as f:
f.write(header_text)
print(f"Header-Datei wurde erstellt: {output_file}")
if fcs.read_and_compare_json_checksum(json_output_file, checksum):
print("Keine Änderungen im DTC-JSON-file erforderlich.")
else:
dtc_info = {
"codegenerator_checksum": checksum,
'timestamp' : time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(timestamp)),
"dtc_table_data": []
}
# Verarbeiten der sortierten Zeilen
for i, line in enumerate(dtc_lines):
num, dtc_name, dtc_severity, title, description = line
dtc_info["dtc_table_data"].append({"num": num, "title": title, "description": description})
# JSON-Datei mit UTF-8-Zeichencodierung erstellen
with open(json_output_file, 'w', encoding='utf-8') as json_f:
json.dump(dtc_info, json_f, ensure_ascii=False, indent=4, separators=(',', ': '))
print(f"JSON-Datei wurde erstellt: {json_output_file}")

45
Software/codegen/filechecksum.py
View File

@@ -1,45 +0,0 @@
import hashlib
import json
# Funktion zum Berechnen der SHA-256-Checksumme
def calculate_checksum(data):
sha256 = hashlib.sha256()
sha256.update(str(data).encode('utf-8'))
return sha256.hexdigest()
# Funktion zum Lesen und Vergleichen der Checksumme in einer Datei
def read_and_compare_checksum(file_path, expected_checksum):
try:
with open(file_path, 'r') as file:
content = file.read()
# Suche nach der Zeile mit der Checksumme
checksum_line_start = content.find("// CODEGENERATOR_CHECKSUM:")
if checksum_line_start != -1:
# Extrahiere die Checksumme aus der Zeile
existing_checksum = content[checksum_line_start + len("// CODEGENERATOR_CHECKSUM:"):].strip()
# Vergleiche die Checksummen
if existing_checksum == expected_checksum:
return True
except FileNotFoundError:
pass # Datei existiert nicht, was nicht schlimm ist
return False
def read_and_compare_json_checksum(json_file_path, expected_checksum):
try:
with open(json_file_path, 'r') as json_file:
# Lade das JSON aus der Datei
data = json.load(json_file)
# Überprüfe, ob "codegenerator_checksum" im JSON vorhanden ist
if "codegenerator_checksum" in data:
existing_checksum = data["codegenerator_checksum"]
# Vergleiche die Checksummen
if existing_checksum == expected_checksum:
return True
except FileNotFoundError:
pass # Datei existiert nicht, was nicht schlimm ist
return False

181
Software/codegen/prepare_littlefs.py
View File

@@ -1,181 +0,0 @@
# SCRIPT TO GZIP CRITICAL FILES FOR ACCELERATED WEBSERVING
# see also https://community.platformio.org/t/question-esp32-compress-files-in-data-to-gzip-before-upload-possible-to-spiffs/6274/10
import glob
import shutil
import gzip
import os
import subprocess
import platform
Import("env")
Import("projenv")
# Überprüfe die Betriebssystemplattform
if platform.system() == "Windows":
# Setze die Pfade zu den Tools für Windows
html_minifier_path = os.path.join(os.getenv("APPDATA"), "npm", "html-minifier.cmd")
uglifyjs_path = os.path.join(os.getenv("APPDATA"), "npm", "uglifyjs.cmd")
terser_path = os.path.join(os.getenv("APPDATA"), "npm", "terser.cmd")
cssnano_path = os.path.join(os.getenv("APPDATA"), "npm", "cssnano.cmd")
elif platform.system() == "Linux":
# Setze die Namen der Tools für Linux
html_minifier_path = "html-minifier"
uglifyjs_path = "uglifyjs"
terser_path = "terser"
cssnano_path = "cssnano"
else:
# Hier könntest du weitere Bedingungen für andere Betriebssysteme hinzufügen
raise Exception("Unterstütztes Betriebssystem nicht erkannt")
def minify_html(input_path, output_path):
subprocess.run([html_minifier_path, '--collapse-whitespace', '--remove-comments', input_path, '-o', output_path])
def minify_js(input_path, output_path):
subprocess.run([terser_path, input_path, '-o', output_path, '-c', '-m'])
def minify_css(input_path, output_path):
subprocess.run([cssnano_path, '--no-discardUnused', input_path, output_path])
def process_file(src_path, dest_path):
_, file_extension = os.path.splitext(src_path)
# Extrahiere den Ordnerpfad im Zielverzeichnis
dest_dir = os.path.dirname(dest_path)
# Erstelle den Ordner und alle dazugehörigen Unterordner, falls sie nicht existieren
os.makedirs(dest_dir, exist_ok=True)
if file_extension.lower() == '.js':
minify_js(src_path, dest_path)
elif file_extension.lower() == '.css':
minify_css(src_path, dest_path)
elif file_extension.lower() in ['.html', '.htm']:
minify_html(src_path, dest_path)
else:
# Kopiere nicht bearbeitbare Dateien direkt in den Zielordner
shutil.copy2(src_path, dest_path)
def strip_files(src_dir, dest_dir):
# Erstelle den Zielordner und alle dazugehörigen Unterordner, falls sie nicht existieren
os.makedirs(dest_dir, exist_ok=True)
# Durchlaufe alle Dateien und Unterverzeichnisse im Quellordner
for root, _, files in os.walk(src_dir):
for filename in files:
src_path = os.path.join(root, filename)
dest_path = os.path.relpath(src_path, src_dir)
dest_path = os.path.join(dest_dir, dest_path)
# Verarbeite nur Dateien (keine Unterverzeichnisse)
process_file(src_path, dest_path)
def gzip_file(src_path, dst_path):
with open(src_path, 'rb') as src, gzip.open(dst_path, 'wb') as dst:
for chunk in iter(lambda: src.read(4096), b""):
dst.write(chunk)
def getListOfFiles(dirName):
# create a list of file and sub directories
# names in the given directory
listOfFile = os.listdir(dirName)
allFiles = list()
# Iterate over all the entries
for entry in listOfFile:
# Create full path
fullPath = os.path.join(dirName, entry)
# If entry is a directory then get the list of files in this directory
if os.path.isdir(fullPath):
allFiles = allFiles + getListOfFiles(fullPath)
else:
allFiles.append(fullPath)
return allFiles
def remove_prefix(text, prefix):
if text.startswith(prefix):
return text[len(prefix):]
return text # or whatever
# Compress files from 'data_src/' to 'data/'
def gzip_webfiles(source, target, env):
# Filetypes to compress
filetypes_to_gzip = ['.css', '.png', '.js', '.ico', '.woff2', '.json']
print('\nGZIP: Starting gzip-Process for LittleFS-Image...\n')
data_src_dir_path = os.path.join(env.get('PROJECT_DIR'), 'data_src')
data_temp_dir_path = os.path.join(env.get('PROJECT_DIR'), 'data_stripped')
strip_files(data_src_dir_path, data_temp_dir_path)
data_dir_path = env.get('PROJECT_DATA_DIR')
# check if data and datasrc exist. If the first exists and not the second, it renames it
if(os.path.exists(data_dir_path) and not os.path.exists(data_temp_dir_path)):
print('GZIP: Directory "'+data_dir_path +
'" exists, "'+data_temp_dir_path+'" is not found.')
print('GZIP: Renaming "' + data_dir_path +
'" to "' + data_temp_dir_path + '"')
os.rename(data_dir_path, data_temp_dir_path)
# Delete the 'data' directory
if(os.path.exists(data_dir_path)):
print('GZIP: Deleting the "data" directory ' + data_dir_path)
shutil.rmtree(data_dir_path)
# Recreate empty 'data' directory
print('GZIP: Re-creating an empty data directory ' + data_dir_path)
os.mkdir(data_dir_path)
# Determine the files to compress
files_to_copy = []
files_to_gzip = []
all_data_src = getListOfFiles(data_temp_dir_path)
for file in all_data_src:
file_name, file_extension = os.path.splitext(file)
print(file_name + " has filetype " + file_extension)
if file_extension in filetypes_to_gzip:
files_to_gzip.append(file)
else:
filename_subdir = remove_prefix(file, data_temp_dir_path)
files_to_copy.append(filename_subdir)
for file in files_to_copy:
print('GZIP: Copying file from: ' + data_temp_dir_path + file + ' to: ' + data_dir_path + file)
os.makedirs(os.path.dirname(data_dir_path + file), exist_ok=True)
shutil.copy(data_temp_dir_path + file, data_dir_path + file)
# Compress and move files
was_error = False
try:
for source_file_path in files_to_gzip:
print('GZIP: compressing... ' + source_file_path)
filename_subdir = remove_prefix(source_file_path, data_temp_dir_path)
target_file_path = data_dir_path + filename_subdir
os.makedirs(os.path.dirname(target_file_path), exist_ok=True)
print('GZIP: Compressed... ' + target_file_path)
gzip_file(source_file_path, target_file_path + ".gz")
except IOError as e:
was_error = True
print('GZIP: Failed to compress file: ' + source_file_path)
# print( 'GZIP: EXCEPTION... {}'.format( e ) )
if was_error:
print('GZIP: Failure/Incomplete.\n')
else:
print('GZIP: Compressed correctly.\n')
shutil.rmtree(data_temp_dir_path)
return
def gzip_binffiles(source, target, env):
littlefsbin = target[0].get_abspath()
targetbin = os.path.join(os.path.dirname(littlefsbin), 'filesystem.fs')
shutil.copyfile(littlefsbin, targetbin)
gzip_file(targetbin, os.path.join(str(targetbin) + '.gz'))
os.remove(targetbin)
return
# IMPORTANT, this needs to be added to call the routine
env.AddPreAction('$BUILD_DIR/littlefs.bin', gzip_webfiles)
env.AddPostAction('$BUILD_DIR/littlefs.bin', gzip_binffiles)

8
Software/codegen/run_pre.py
View File

@@ -1,8 +0,0 @@
Import("env") # pylint: disable=undefined-variable
env.Execute("\"$PYTHONEXE\" -m pip install jinja2")
import struct2json
import dtcs
struct2json.struct2json()
dtcs.build_dtcs()

113
Software/codegen/struct2json.py
View File

@@ -1,113 +0,0 @@
import os
import time
from jinja2 import Environment, FileSystemLoader
import re
import filechecksum as fcs
# Pfad zur Eingabedatei und Ausgabedatei
input_file = "include/eeprom.h"
output_sourcefile = "src/struct2json.cpp"
output_headerfile = "include/struct2json.h"
# Liste der zu suchenden Variablen/Structs
variable_names = ['ConfigData', 'PersistenceData']
def get_types(file_content, variable_names):
result = {}
# Entferne Kommentare, um unerwünschte Störungen zu vermeiden
file_content = re.sub(r'\/\*.*?\*\/', '', file_content, flags=re.DOTALL)
file_content = re.sub(r'\/\/.*', '', file_content)
for var_name in variable_names:
# Erstelle ein reguläres Ausdrucksmuster, um den Typ der Variable zu extrahieren
pattern = re.compile(r'\b(?:extern\s+)?(\w+)\s+' + re.escape(var_name) + r'\s*;')
match = pattern.search(file_content)
if match:
# Extrahiere den Typ aus dem Treffer
type_match = match.group(1)
result[var_name] = type_match
return result
def extract_struct_fields(file_content, variable_types):
result = {}
# Entferne Kommentare, um unerwünschte Störungen zu vermeiden
file_content = re.sub(r'\/\*.*?\*\/', '', file_content, flags=re.DOTALL)
file_content = re.sub(r'\/\/.*', '', file_content)
for var_name, var_type in variable_types.items():
# Erstelle ein reguläres Ausdrucksmuster, um das Strukturfeld zu extrahieren
pattern = re.compile(r'typedef\s+struct\s*{([^}]*)}\s*' + re.escape(var_type) + r'\s*;')
match = pattern.search(file_content)
if match:
# Extrahiere die Felder aus dem Treffer
fields_match = re.findall(r'\b(\w+)\s+(\w+)(?:\[(\d+)\])?\s*;', match.group(1))
if fields_match:
result[var_name] = {'type': var_type, 'fields': {}}
for field_type, field_name, array_size in fields_match:
if array_size:
result[var_name]['fields'][field_name] = {'type': field_type, 'size': int(array_size)}
else:
result[var_name]['fields'][field_name] = {'type': field_type}
return result
def struct2json():
# Überprüfen, ob die Verzeichnisse existieren, andernfalls erstellen
output_dir_source = os.path.dirname(output_sourcefile)
if not os.path.exists(output_dir_source):
os.makedirs(output_dir_source)
output_dir_header = os.path.dirname(output_headerfile)
if not os.path.exists(output_dir_header):
os.makedirs(output_dir_header)
# Unix-Zeitstempel hinzufügen
timestamp = int(time.time())
# Parse structs
with open(input_file, 'r') as file:
content = file.read()
variable_types = get_types(content, variable_names)
structs = extract_struct_fields(content, variable_types)
checksum = fcs.calculate_checksum(structs)
env = Environment(loader=FileSystemLoader('codegen/templates', encoding='utf-8'))
# Lade das Jinja2-Template aus der Datei
template_c = env.get_template('struct2json.cpp.j2')
template_h = env.get_template('struct2json.h.j2')
# Erstelle ein Context-Dictionary mit den erforderlichen Daten
context = {
'timestamp_unix': timestamp,
'timestamp' : time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(timestamp)),
'date' : time.strftime('%d.%m.%Y', time.localtime(timestamp)),
'structs': structs,
'checksum': checksum
}
# Überprüfe, ob die Checksummen übereinstimmen
if fcs.read_and_compare_checksum(output_sourcefile, checksum):
print("Keine Änderungen in der Source-Datei erforderlich.")
else:
# Rendere das Template mit den Werten und erhalte den Source-Text
source_text = template_c.render(context)
# Schreibe den generierten Source-Text in die Source-Datei
with open(output_sourcefile, "w", encoding='utf-8') as f:
f.write(source_text)
print(f"Source-Datei wurde erstellt: {output_sourcefile}")
# Überprüfe, ob die Checksummen übereinstimmen
if fcs.read_and_compare_checksum(output_headerfile, checksum):
print("Keine Änderungen in der Header-Datei erforderlich.")
else:
# Rendere das Template mit den Werten und erhalte den Header-Text
header_text = template_h.render(context)
# Schreibe den generierten Header-Text in die Header-Datei
with open(output_headerfile, "w", encoding='utf-8') as f:
f.write(header_text)
print(f"Header-Datei wurde erstellt: {output_headerfile}")

54
Software/codegen/templates/dtc_defs.h.j2
View File

@@ -1,54 +0,0 @@
/**
* @file dtc_defs.h
*
* @brief Header file for Diagnostic Trouble Code (DTC) definitions in the DE-Timer application.
*
* This file contains definitions for Diagnostic Trouble Codes (DTC) in the DE-Timer project.
* It includes enums for DTC active status, severity levels, and specific DTC codes.
* The file also defines an array of DTC definitions and a timestamp indicating the generation time.
*
* @note This file is auto-generated by a script on {{ timestamp }}.
*
* @author Marcel Peterkau
* @date {{ date }}
*/
#ifndef DTC_DEFS_H
#define DTC_DEFS_H
#include <stdint.h>
typedef uint32_t DTCNum_t;
typedef enum
{
DTC_INACTIVE,
DTC_ACTIVE,
DTC_PREVIOUS
} DTCActive_t;
typedef enum
{
DTC_NONE,
DTC_INFO,
DTC_WARN,
DTC_CRITICAL
} DTCSeverity_t;
typedef struct {
DTCNum_t code;
DTCSeverity_t severity;
} DTC_t;
{% for dtc in dtc_macros -%}
{{ dtc }}
{% endfor %}
const DTC_t dtc_definitions[] = {
{% for struct in dtc_structs -%}
{{ struct }}
{% endfor -%}
};
#endif // DTC_DEFS_H
// CODEGENERATOR_CHECKSUM: {{ checksum }}

25
Software/codegen/templates/struct2json.cpp.j2
View File

@@ -1,25 +0,0 @@
/**
* @file struct2json.cpp
*
* @brief Implementation file for converting structs to JSON objects.
*
* @note This file is auto-generated by a script on {{ timestamp }}.
*
* @author Marcel Peterkau
* @date {{ date }}
*/
#include "struct2json.h"
{% for var_name, var_info in structs.items() -%}
void generateJsonObject_{{ var_name }}(JsonObject data)
{
{% for field_name, field_type in var_info['fields'].items() -%}
data["{{ field_name }}"] = {{ var_name }}.{{ field_name }};
{% endfor -%}
}
{% endfor %}
// CODEGENERATOR_CHECKSUM: {{ checksum }}

26
Software/codegen/templates/struct2json.h.j2
View File

@@ -1,26 +0,0 @@
/**
* @file struct2json.h
*
* @brief Header file for converting structs to JSON objects.
*
* @note This file is auto-generated by a script on {{ timestamp }}.
*
* @author Marcel Peterkau
* @date {{ date }}
*/
#ifndef _STRUCT2JSON_H_
#define _STRUCT2JSON_H_
#include <Arduino.h>
#include <ArduinoJson.h>
#include "eeprom.h"
{% for var_name, var_info in structs.items() -%}
void generateJsonObject_{{ var_name }}(JsonObject data);
{% endfor %}
#endif /* _STRUCT2JSON_H_ */
// CODEGENERATOR_CHECKSUM: {{ checksum }}

566
Software/data_src/index.htm
View File

@@ -1,566 +0,0 @@
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8" />
<title>%DEVICENAME%</title>
<meta name="viewport" content="width=device-width, initial-scale=1">
<link rel="stylesheet" href="static/css/bootstrap.min.css">
<link rel="stylesheet" href="static/css/custom.css">
<link rel="stylesheet" href="static/css/tweaks.css">
<script src="static/js/jquery.min.js"></script>
<script src="static/js/bootstrap.min.js"></script>
<script src="static/js/websocket.js"></script>
<link rel="apple-touch-icon" sizes="180x180" href="static/img/apple-touch-icon.png">
<link rel="icon" type="image/png" sizes="32x32" href="static/img/favicon-32x32.png">
<link rel="icon" type="image/png" sizes="16x16" href="static/img/favicon-16x16.png">
<link rel="manifest" href="static/img/site.webmanifest">
</head>
<body>
<nav class="navbar fixed-top navbar-dark bg-primary" id="navbar1">
<a class="navbar-brand" href="#">
<img src="static/img/logo.png" width="30" height="30" class="d-inline-block align-top mr-1" alt="">
%DEVICENAME%
</a>
<button class="navbar-toggler" type="button" data-toggle="collapse" data-target="#collapsingNavbar"
aria-controls="collapsingNavbar" aria-expanded="false" aria-label="Toggle navigation">
<span class="navbar-toggler-icon"></span>
</button>
<div class="collapse navbar-collapse" id="collapsingNavbar">
<ul class="navbar-nav nav mr-auto mt-2 mt-lg-0">
<li class="nav-item"><a class="nav-link active" role="tab" data-toggle="tab" href="#tab_home">Home</a></li>
<li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_maintenance">Wartung</a></li>
<li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_source">Einstellungen</a></li>
<li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_sysinfo">Systeminfo</a></li>
<li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_fwupdate">Update</a></li>
</ul>
</div>
</nav>
<main class="container">
<!-- Tabs Content -->
<div class="tab-content">
<!-- Div Tab Home-->
<div id="tab_home" class="tab-pane fade show active" role="tabpanel">
<div class="col text-center">
<div class="jumbotron">
<img src="static/img/logo.png" width="120" height="120" class="img-fluid" alt="">
<h3 class="pt-3">%DEVICENAME%</h3>
</div>
</div>
<!-- Div Group Battery remain -->
<hr />
<p>
<h4>Akku Ladestand</h4>
<div class="progress">
<div class="progress-bar text-light" role="progressbar" aria-valuenow="%BAT_REMAIN_CAPACITY%"
aria-valuemin="0" aria-valuemax="100" style="width: %BAT_REMAIN_CAPACITY%&#37;">
%BAT_REMAIN_CAPACITY%&#37;
</div>
</div>
</p>
<!-- Div Group Battery remain -->
<!-- Div Group current Mode -->
<hr />
<p>
<h4>aktueller Modus</h4>
<input class="form-control" type="text" placeholder="%SYSTEM_STATUS%" readonly>
</p>
<!-- Div Group current Mode -->
<!-- Div Group Faction Points -->
<hr />
<p>
<h4>aktueller Punktestand</h4>
<div class="container-fluid">
<div class="row">
<div class="col text-center %FACTION_1_ACTIVE% text-white p-3">%NAME_FAC_1%</div>
<div class="col text-center %FACTION_2_ACTIVE% text-white p-3">%NAME_FAC_2%</div>
<div class="col text-center %FACTION_3_ACTIVE% text-white p-3">%NAME_FAC_3%</div>
</div>
<div class="row">
<div class="col bg-dark text-white p-3"><img src="static/img/logo_fac1.png"
class="rounded mx-auto img-fluid d-block" alt="...">
</div>
<div class="col bg-dark text-white p-3"><img src="static/img/logo_fac2.png"
class="rounded mx-auto img-fluid d-block" alt="...">
</div>
<div class="col bg-dark text-white p-3"><img src="static/img/logo_fac3.png"
class="rounded mx-auto img-fluid d-block" alt="...">
</div>
</div>
<div class="row">
<div class="col text-center bg-secondary text-white p-3">%POINTS_FAC_1%</div>
<div class="col text-center bg-secondary text-white p-3">%POINTS_FAC_2%</div>
<div class="col text-center bg-secondary text-white p-3">%POINTS_FAC_3%</div>
</div>
</div>
</p>
<!-- Div GroupFaction Points -->
<!-- Div Group DTC Table -->
<div %SHOW_DTC_TABLE%>
<hr />
<p>
<h4>Fehlercodes</h4>
<table class="table">
<tbody>
<tr>
<th class="col-6" scope="col">Zeitstempel</th>
<th class="col-2" scope="col">Fehlercode</th>
<th class="col-2" scope="col">Schwere</th>
<th class="col-2" scope="col">Aktiv</th>
</tr>
%DTC_TABLE%
</tbody>
</table>
</p>
</div>
<!-- Div Group DTC Table -->
</div>
<!-- Div Tab Home-->
<!-- Div Tab Maintenance -->
<div id="tab_maintenance" class="tab-pane fade" role="tabpanel">
<h3>Wartung</h3>
<!-- Div Group Reset Timers -->
<hr />
<p>
<h4>Punkte zur&uuml;cksetzen</h4>
<form action="post.htm" method="POST" class="form-horizontal">
<div class="form-group row">
<div class="col text-center">
<button name="resetpoints" type="submit" class="btn btn-outline-primary">Reset</button>
</div>
</div>
</form>
</p>
<!-- Div Group Reset Timers -->
<!-- Div Group EEPROM formatting -->
<hr />
<p>
<h4>EEPROM formatieren</h4>
<div class="alert alert-primary alert-dismissable show fade" role="alert">
<button type="button" class="close" data-dismiss="alert" aria-label="Close">
<span aria-hidden="true">×</span>
</button>
<strong>Achtung!</strong><br>
Das Formatieren der EEPROM-Bereiche sollte nur ausgeführt werden wenn es unbedingt erforderlich ist!
Hierdurch werden alle Einstellungen zurück gesetzt bzw. alle Betriebsdaten gehen verloren.
Folgende Situationen erfordern unter anderem eine Formatierung:
- Erstinitialisierung (bei neu aufgebautem Gerät)
- Firmware-Update (nur wenn es die Release-Notes fordern)
</div>
<form action="post.htm" method="POST" class="form-horizontal">
<div class="form-group row">
<div class="offset-4 col-8">
<div class="form-check">
<input class="form-check-input" type="checkbox" name="reset_ee_cfg" id="reset_ee_cfg">
<label class="form-check-label" for="reset_ee_cfg">
Bereich "CFG"
</label>
</div>
<div class="form-check">
<input class="form-check-input" type="checkbox" name="reset_ee_pds" id="reset_ee_pds">
<label class="form-check-label" for="reset_ee_pds">
Bereich "PDS"
</label>
</div>
</div>
</div>
<div class="form-group row">
<div class="col text-center">
<button name="reset_ee_btn" type="submit" class="btn btn-outline-primary">EEPROM formatieren</button>
</div>
</div>
</form>
</p>
<!-- Div Group EEPROM formatting -->
<!-- Div Group Device Reboot -->
<hr />
<p>
<h4>Ger&auml;t neustarten</h4>
<form action="post.htm" method="POST" class="form-horizontal">
<div class="form-group row">
<div class="col text-center">
<button name="reboot" type="submit" class="btn btn-outline-primary">Reboot</button>
</div>
</div>
</form>
</p>
<!-- Div Group Device Reboot -->
</div>
<!-- Div Tab Maintenance -->
<!-- Div Tab Settings-->
<div id="tab_source" class="tab-pane fade" role="tabpanel">
<h3>Einstellungen</h3>
<!-- Div Group Battery Type -->
<hr />
<p>
<form action="post.htm" method="POST" class="form-horizontal">
<h4>Akku-Variante</h4>
<div class="form-group row">
<label for="battery_select" class="control-label col-4">Akku</label>
<div class="col-8">
<select id="battery_select" name="battery_select" class="select form-control">
%BATTERY_SELECT_OPTIONS%
</select>
</div>
</div>
<h4>Timer-Einstellungen</h4>
<div class="form-group row">
<label for="factionreboot_cont" class="control-label col-4">active Faction Recovery</label>
<div class="col-8">
<div class="form-check">
<input class="form-check-input" type="checkbox" name="factionreboot_cont" id="factionreboot_cont"
%FACTIONREBOOT_CHECKED%>
<label class="form-check-label" for="factionreboot_cont">
aktive Faktion beim booten wiederherstellen ?
</label>
</div>
</div>
</div>
<h4>Faktionsbezeichnungen</h4>
<div class="alert alert-primary alert-dismissable show fade" role="alert">
<button type="button" class="close" data-dismiss="alert" aria-label="Close">
<span aria-hidden="true">×</span>
</button>
<strong>Achtung!</strong><br>
Faktionsbezeichnungen können nur aus ASCII-Zeichen bestehen, also A-Z, a-z und 0-9
</div>
<div class="form-group row">
<label for="faction_1_name" class="control-label col-4">Faktion 1</label>
<div class="col-8">
<div class="input-group">
<input id="faction_1_name" name="faction_1_name" value="%NAME_FAC_1%" type="text" class="form-control" pattern="[A-Za-z0-9 _-]{1,32}">
<div class="input-group-append">
<span class="input-group-text">max 32 Zeichen</span>
</div>
</div>
</div>
</div>
<div class="form-group row">
<label for="faction_2_name" class="control-label col-4">Faktion 2</label>
<div class="col-8">
<div class="input-group">
<input id="faction_2_name" name="faction_2_name" value="%NAME_FAC_2%" type="text" class="form-control" pattern="[A-Za-z0-9 _-]{1,32}">
<div class="input-group-append">
<span class="input-group-text">max 32 Zeichen</span>
</div>
</div>
</div>
</div>
<div class="form-group row">
<label for="faction_3_name" class="control-label col-4">Faktion 3</label>
<div class="col-8">
<div class="input-group">
<input id="faction_3_name" name="faction_3_name" value="%NAME_FAC_3%" type="text" class="form-control" pattern="[A-Za-z0-9 _-]{1,32}">
<div class="input-group-append">
<span class="input-group-text">max 32 Zeichen</span>
</div>
</div>
</div>
</div>
<div class="form-group row">
<div class="col text-center">
<button name="settingssave" type="submit" class="btn btn-outline-primary">&Uuml;bernehmen</button>
</div>
</div>
</form>
</p>
<!-- Div Group Battery Type -->
</div>
<!-- Div Tab Settings -->
<!-- Div Tab SystemInfo -->
<div id="tab_sysinfo" class="tab-pane fade" role="tabpanel">
<h3>Systeminfo</h3>
<!-- Div Group Sysinfo:Geraeteinfo -->
<hr />
<p>
<h4>Ger&auml;t</h4>
<table class="table">
<tbody>
<tr>
<th class="col-7" scope="col">Parameter</td>
<th class="col-5" scope="col">Value</td>
</tr>
<tr>
<td>Hostname</td>
<td>%HOSTNAME%</td>
</tr>
<tr>
<td>Device-ID</td>
<td>%DEVICENAME_ID%</td>
</tr>
<tr>
<td>Battery Voltage</td>
<td>%BAT_VOLTAGE%V</td>
</tr>
<tr>
<td>Battery Remain</td>
<td>%BAT_REMAIN_CAPACITY%&#37;</td>
</tr>
</table>
</p>
<!-- Div Group Sysinfo:Geraeteinfo -->
<!-- Div Group Sysinfo:Settings -->
<hr />
<p>
<h4>Einstellungen</h4>
<table class="table">
<tbody>
<tr>
<th class="col-7" scope="col">Parameter</td>
<th class="col-5" scope="col">Value</td>
</tr>
<tr>
<td>Battery_type</td>
<td>%BATTERY_TYPE%</td>
</tr>
<tr>
<td>Faction_recovery</td>
<td>%FACTION_RECOVERY%</td>
</tr>
<tr>
<td>EEPROM Version</td>
<td>%EEPROM_VERSION%</td>
</tr>
<tr>
<td>Checksum</td>
<td>%CONFIG_CHECKSUM%</td>
</tr>
</tbody>
</table>
</p>
<!-- Div Group Sysinfo:Settings -->
<!-- Div Group Sysinfo:Persistance -->
<hr />
<p>
<h4>Betriebsdaten</h4>
<table class="table">
<tbody>
<tr>
<th class="col-7" scope="col">Parameter</td>
<th class="col-5" scope="col">Value</td>
</tr>
<tr>
<td>writeCycleCounter</td>
<td>%WRITE_CYCLE_COUNT%</td>
</tr>
<tr>
<td>PersistenceMarker</td>
<td>%PERSISTENCE_MARKER%</td>
</tr>
<tr>
<td>activeFaction</td>
<td>%ACTIVE_FACTION%</td>
</tr>
<tr>
<td>faction_1_timer</td>
<td>%POINTS_FAC_1%</td>
</tr>
<tr>
<td>faction_2_timer</td>
<td>%POINTS_FAC_2%</td>
</tr>
<tr>
<td>faction_3_timer</td>
<td>%POINTS_FAC_3%</td>
</tr>
<tr>
<td>checksum</td>
<td>%PERSISTANCE_CHECKSUM%</td>
</tr>
</table>
</p>
<!-- Div Group Sysinfo:Persistance -->
<!-- Div Group LiveDebug -->
<hr />
<p>
<h4>Live Debug</h4>
<div class="form-group row">
<textarea class="form-control" spellcheck="false" id="livedebug-out" rows="3" readonly></textarea>
</div>
<div class="form-group row">
<div class="col text-center">
<button id="btn-ws-start" class="btn btn-outline-primary">Start</button>
<button id="btn-ws-stop" class="btn btn-outline-primary ml-2">Stop</button>
</div>
</div>
</p>
<!-- Div Group LiveDebug -->
</div>
<!-- Div Tab SystemInfo -->
<!-- Div Tab Firmware Update-->
<div id="tab_fwupdate" class="tab-pane fade" role="tabpanel">
<h3>Firmware</h3>
<!-- Div Group VersionInfo -->
<hr />
<p>
<h4>Version-Info</h4>
<table class="table">
<tbody>
<tr>
<th class="col-7" scope="col">Parameter</td>
<th class="col-5" scope="col">Value</td>
</tr>
<tr>
<td>Firmware Version</td>
<td>%SW_VERSION%</td>
</tr>
<tr>
<td>Flash Version</td>
<td>%FS_VERSION%</td>
</tr>
<tr>
<td>Git Revision</td>
<td>%GIT_REV%</td>
</tr>
</table>
</p>
<!-- Div Group VersionInfo -->
<!-- Div Group EEPROM Backup -->
<hr />
<p>
<h4>EEPROM-Backup</h4>
<div class="form-group row">
<div class="col text-center">
<a class="btn btn-outline-primary" href="eejson" role="button" id="ee-backup-download">Download</a>
</div>
</div>
</p>
<!-- Div Group EEPROM Backup -->
<!-- Div Group EEPROM Restore -->
<hr />
<p>
<h4>EEPROM-Restore</h4>
<form method='POST' action='eeRestore' enctype='multipart/form-data'>
<div class="form-group row">
<div class="custom-file">
<input type="file" name="ee-restore-file" class="custom-file-input" id="ee-restore-file" accept=".ee.json"
required />
<label class="custom-file-label" for="ee-restore-file">EEPROM-Backup ausw&auml;hlen</label>
</div>
</div>
<div class="form-group row">
<div class="col text-center">
<button name="submit" type="submit" class="btn btn-outline-primary">Restore starten</button>
</div>
</div>
</form>
</p>
<!-- Div Group EEPROM Restore -->
<!-- Div Group Firmware Update -->
<hr />
<p>
<h4>Firmware-Update</h4>
<form method='POST' action='doUpdate' enctype='multipart/form-data'>
<div class="form-group row">
<div class="custom-file">
<input type="file" name="fw-update-file" class="custom-file-input" id="fw-update-file"
accept=".fw.bin,.fs.gz" required />
<label class="custom-file-label" for="fw-update-file">Firmware-Update ausw&auml;hlen</label>
</div>
</div>
<div class="form-group row">
<div class="col text-center">
<button name="submit" type="submit" class="btn btn-outline-primary">Update starten</button>
</div>
</div>
</form>
</p>
<!-- Div Group Firmware Update -->
</div>
<!-- Div Tab Firmware Update-->
</div>
<!-- Tabs Content -->
</main>
<!-- Footer -->
<footer class="page-footer navbar-dark bg-primary font-small fixed-bottom">
<div class="container-fluid text-center">
<div class="footer-copyright text-center py-3">
<span class="text-muted">© 2023 -
<a class="text-reset fw-bold" href="https://hiabuto.de/">Hiabuto Defense Systems</a></span>
</div>
</div>
</footer>
<!-- Footer -->
<!-- Modal Dialog -->
<div class="modal fade" id="dtcModal" tabindex="-1" role="dialog" aria-labelledby="dtcModalLabel" aria-hidden="true">
<div class="modal-dialog modal-dialog-centered" role="document">
<div class="modal-content">
<div class="modal-header">
<h5 class="modal-title" id="dtcModalLabel">DTC-Description</h5>
<button type="button" class="close" data-dismiss="modal" aria-label="Close">
<span aria-hidden="true">&times;</span>
</button>
</div>
<div class="modal-body">
<p class="dtc-desc">DTC Description</p>
<p class="dtc-debugval">DTC DebugVal</p>
</div>
<div class="modal-footer">
<button type="button" class="btn btn-outline-secondary" data-dismiss="modal">Close</button>
</div>
</div>
</div>
</div>
<!-- Modal Dialog -->
<script>
$('.navbar-nav>li>a').on('click', function () {
$('.navbar-collapse').collapse('hide');
});
document.querySelector('.custom-file-input').addEventListener('change', function (e) {
var fileName = document.getElementById("fw-update-file").files[0].name;
var nextSibling = e.target.nextElementSibling
nextSibling.innerText = fileName
});
$(document).ready(function () {
$("tr[data-dtc]").each(function (i) {
$(this).attr('data-toggle', "modal");
$(this).attr('data-target', "#dtcModal");
});
});
$('#dtcModal').on('show.bs.modal', function (event) {
var dtctr = $(event.relatedTarget)
var dtc = dtctr.data('dtc')
var debugval = dtctr.data('debugval')
var modal = $(this)
$.getJSON('static/tt_dtc/dtc_' + dtc + '.json', function (data) {
modal.find('.modal-title').text(data.title)
modal.find('.dtc-desc').text(data.description)
if (debugval > 0) {
modal.find('.dtc-debugval').text("Debugvalue: " + debugval)
}
else {
modal.find('.dtc-debugval').remove()
}
}).fail(function () {
console.log("An error has occurred.");
modal.find('.modal-title').text("Fehler")
modal.find('.dtc-desc').text("DTC-Beschreibung konnte nicht geladen werden")
});
});
</script>
</body>
</html>

10003
Software/data_src/static/css/bootstrap.min.css vendored
View File

File diff suppressed because it is too large Load Diff

8441
Software/data_src/static/css/custom.css
View File

File diff suppressed because it is too large Load Diff

90
Software/data_src/static/css/tweaks.css
View File

@@ -1,90 +0,0 @@
@font-face {
font-family: 'Comfortaa';
font-style: normal;
font-weight: 300;
src: url(../fonts/comfortaa.woff2) format('woff2');
unicode-range: U+0000-00FF, U+0131, U+0152-0153, U+02BB-02BC, U+02C6, U+02DA, U+02DC, U+2000-206F, U+2074, U+20AC, U+2122, U+2191, U+2193, U+2212, U+2215, U+FEFF, U+FFFD;
}
body {
padding-top: 70px;
margin-bottom: 70px;
}
hr {
height: 2px;
border-width: 0;
color: gray;
background-color: gray
}
.dtc-debugval {
color: #F2771A;
font: 0.8rem Inconsolata, monospace;
background-color: black;
padding: 10px;
}
#overlay {
display: none;
position: fixed;
top: 0;
left: 0;
width: 100%;
height: 100%;
background: rgba(0, 0, 0, 0.8); /* Dunkler Hintergrund mit Transparenz */
color: white; /* Textfarbe */
justify-content: center;
align-items: center;
z-index: 9999; /* Stellen Sie sicher, dass es über anderen Elementen liegt */
}
.overlay-content {
text-align: center;
font-size: 4rem;
}
.loader {
width: 96px;
height: 96px;
border: 12px solid #FFF;
border-radius: 50%;
display: inline-block;
position: relative;
box-sizing: border-box;
animation: rotation 1s linear infinite;
}
.loader::after {
content: '';
box-sizing: border-box;
position: absolute;
left: 50%;
top: 50%;
transform: translate(-50%, -50%);
width: 120px;
height: 120px;
border-radius: 50%;
border: 12px solid transparent;
border-bottom-color: #FF3D00;
}
@keyframes rotation {
0% {
transform: rotate(0deg);
}
100% {
transform: rotate(360deg);
}
}
.notification-container {
position: fixed;
top: 30%;
left: 50%;
transform: translateX(-50%);
z-index: 1000;
}
.notification {
margin-bottom: 20px; /* Fügen Sie bei Bedarf weitere Stile hinzu */
}

96
Software/data_src/static/dtc_table.json
View File

@@ -1,96 +0,0 @@
{
"codegenerator_checksum": "313d59949b074024df3c5d796f65e3bd518e34f0bb171185c30f008f21c19d30",
"timestamp": "2024-05-30 21:56:51",
"dtc_table_data": [
{
"num": 0,
"title": "No Error",
"description": "No Error"
},
{
"num": 1,
"title": "Akku leer",
"description": "Akku ist komplett leer. Den Akku aufladen!"
},
{
"num": 2,
"title": "Akku niedrig",
"description": "Akku ist unter der Warnschwelle. Den Akku demnächst aufladen"
},
{
"num": 3,
"title": "kein EEPROM erkannt",
"description": "Es wurde kein EEPROM gefunden. Dies lässt einen Hardware-Defekt vermuten."
},
{
"num": 4,
"title": "EEPROM CFG Checksumme",
"description": "Die Checksumme der Config-Partition des EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'CFG' im Menu 'Wartung' zurück"
},
{
"num": 5,
"title": "EEPROM PDS Checksumme",
"description": "Die Checksumme der Betriebsdaten-Partition des EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'PDS' im Menu 'Wartung' zurück"
},
{
"num": 6,
"title": "EEPROM PDS Adresse",
"description": "Die Adresse der Betriebsdaten-Partition im EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'PDS' im Menu 'Wartung' zurück"
},
{
"num": 7,
"title": "EEPROM Version falsch",
"description": "Die Layout-Version des EEPROM stimmt nicht mit der Firmware-Version überein. Setzen sie den EEPROM-Bereich 'CFG' im Menu 'Wartung' zurück"
},
{
"num": 8,
"title": "Flashspeicher Fehler",
"description": "Der Flashspeicher konnte nicht initialisiert werden. Aktualisieren sie Flash & Firmware"
},
{
"num": 9,
"title": "Flashversion falsch",
"description": "Die Version des Flashspeicher stimmt nicht mit der Firmware-Version überein. Aktualisieren sie den Flash mit der passenden Update-Datei"
},
{
"num": 10,
"title": "Keine Akkuüberwachung",
"description": "Es wurde keine Akkuüberwachung über I2C gefunden, Prüfen sie die Hardware!"
},
{
"num": 11,
"title": "LoRa-Transceiver Error",
"description": "Es konnte keine Verbindung zum LoRa-Transceiver hergestellt werden. Prüfen Sie die Hardware auf Defekte"
},
{
"num": 12,
"title": "Config-Validierung",
"description": "Ein oder mehrer Einstellungswerte sind ausserhalb plausibler Werte. Prüfen Sie Ihre Einstellungen"
},
{
"num": 13,
"title": "EEPROM-Migration",
"description": "Es wurde ein altes EEPROm Image erkannt, konnte aber nicht migriert werden. EEPROM manuell zurück setzen und neue Einstellunge speichern."
},
{
"num": 14,
"title": "Dummy-DTC Info",
"description": "Ein Dummy-DTC der Schwere \"Info\" für Debugging-Zwecke"
},
{
"num": 15,
"title": "Dummy-DTC Warnung",
"description": "Ein Dummy-DTC der Schwere \"Warnung\" für Debugging-Zwecke"
},
{
"num": 16,
"title": "Dummy-DTC Kritisch",
"description": "Ein Dummy-DTC der Schwere \"Kritisch\" für Debugging-Zwecke"
},
{
"num": 17,
"title": "Last Error",
"description": "Last Error"
}
]
}

BIN
Software/data_src/static/fonts/comfortaa.woff2
View File

Binary file not shown.

BIN
Software/data_src/static/img/critical.png
View File

Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 7.9 KiB

BIN
Software/data_src/static/img/info.png
View File

Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 9.6 KiB

BIN
Software/data_src/static/img/warn.png
View File

Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 9.4 KiB

7
Software/data_src/static/js/bootstrap.min.js vendored
View File

File diff suppressed because one or more lines are too long

196
Software/data_src/static/js/dtc_table.js
View File

@@ -1,196 +0,0 @@
const jsonFilePath = "static/dtc_table.json";
var dtcState = {};
async function processDTCNotifications(dtcArray) {
if (dtcArray.length === 0 || dtcArray[0] == "0") {
dtcState = {};
return;
}
for (var i = 0; i < dtcArray.length; i++) {
var dtcInfo = dtcArray[i].split(",");
var errorCode = parseInt(dtcInfo[1]);
var activity = parseInt(dtcInfo[3]);
var severity = parseInt(dtcInfo[2]);
try {
var { title, description } = await getDescriptionForDTCNumber(errorCode);
switch (severity) {
case 1:
severity = "info";
break;
case 2:
severity = "warning";
break;
case 3:
severity = "danger";
break;
}
if (dtcState[errorCode]) {
// Überprüfen, ob sich der Zustand von "previous" auf "active" geändert hat
if (activity !== dtcState[errorCode]) {
dtcState[errorCode] = activity;
if (activity === 1) showNotification(description, severity);
}
} else {
// DTC ist neu, Zustand speichern und Benachrichtigung anzeigen
dtcState[errorCode] = activity;
showNotification(description, severity);
}
} catch (error) {
console.error("Error processing DTC:", error);
}
}
}
function getDescriptionForDTCNumber(number) {
return new Promise((resolve, reject) => {
fetch(jsonFilePath)
.then((response) => response.json())
.then((data) => {
const dtcList = data.dtc_table_data;
const foundEntry = dtcList.find((entry) => entry.num === number);
if (foundEntry) {
const description = foundEntry.description;
const title = foundEntry.title;
resolve({ title, description });
} else {
// Wenn die Nummer nicht gefunden wurde, geben Sie einen Fehler zurück
reject(`Beschreibung für Nummer ${number} nicht gefunden.`);
}
})
.catch((error) => {
// Im Fehlerfall geben Sie den Fehler zurück
reject(error);
});
});
}
async function showDTCModal(event) {
var dtc = parseInt(event.currentTarget.getAttribute("data-dtc"));
var debugval = event.currentTarget.getAttribute("data-debugval");
var modal = $("#dtcModal");
try {
var { title, description } = await getDescriptionForDTCNumber(dtc);
modal.find(".modal-title").text(title);
modal.find(".dtc-desc").text(description);
if (debugval > 0) {
modal.find(".dtc-debugval").text("Debugvalue: " + debugval);
} else {
modal.find(".dtc-debugval").remove();
}
} catch (error) {
console.error("Fehler beim Abrufen der Beschreibung:", error);
modal.find(".modal-title").text("Fehler");
modal.find(".dtc-desc").text("DTC-Beschreibung konnte nicht geladen werden");
}
// Modal anzeigen
modal.modal("show");
}
function fillDTCTable(dtcArray) {
// Referenz auf das Tabellen-Element
var table = document.getElementById("dtc_table");
var tablediv = document.getElementById("dtc_container");
// Prüfen, ob DTC vorhanden sind
if (dtcArray.length === 0 || dtcArray[0] == "0") {
// Verstecke das Tabellen-Div, wenn keine DTC vorhanden sind
tablediv.hidden = true;
table.innerHTML = "";
return;
} else {
// Zeige das Tabellen-Div, wenn DTC vorhanden sind
tablediv.hidden = false;
}
// Tabelle leeren, bevor sie neu gefüllt wird
table.innerHTML = "";
// Überschriften für die Tabelle erstellen
var headerRow = table.insertRow(0);
// Definition der Klassen und Scopes für die Spalten
var columnDefinitions = [
{ class: "col-6", scope: "Zeitstempel" },
{ class: "col-2", scope: "Fehlercode" },
{ class: "col-2", scope: "Schwere" },
{ class: "col-2", scope: "Aktiv" },
];
for (var i = 0; i < columnDefinitions.length; i++) {
var headerCell = headerRow.insertCell(i);
headerCell.className = `th ${columnDefinitions[i].class}`;
headerCell.scope = columnDefinitions[i].scope;
headerCell.innerHTML = columnDefinitions[i].scope;
}
// DTC-Daten in die Tabelle einfügen
for (var i = 0; i < dtcArray.length; i++) {
var dtcInfo = dtcArray[i].split(",");
var row = table.insertRow(i + 1); // +1 wegen der Überschriftenzeile
// Zeitstempel
var timestampCell = row.insertCell(0);
timestampCell.innerHTML = formatTimestamp(parseInt(dtcInfo[0]));
// Fehlercode
var errorCodeCell = row.insertCell(1);
errorCodeCell.innerHTML = dtcInfo[1];
// Schwere
var severityCell = row.insertCell(2);
var severity = parseInt(dtcInfo[2]);
// Schwere
switch (severity) {
case 1:
severityCell.innerHTML = '<img src="static/img/info.png" alt="Info" />';
break;
case 2:
severityCell.innerHTML =
'<img src="static/img/warn.png" alt="Warnung" />';
break;
case 3:
severityCell.innerHTML =
'<img src="static/img/critical.png" alt="Kritisch" />';
break;
default:
severityCell.innerHTML =
'<img src="static/img/none.png" alt="Unbekannt" />';
}
row.setAttribute("data-dtc", dtcInfo[1]);
row.setAttribute("data-debugval", dtcInfo[4]);
row.addEventListener("click", showDTCModal);
// Aktivität
var activityCell = row.insertCell(3);
activityCell.innerHTML = parseInt(dtcInfo[3]) === 1 ? "active" : "previous";
}
}
function formatTimestamp(milliseconds) {
const date = new Date(milliseconds);
const days = String(date.getUTCDate() - 1).padStart(2, "0");
const hours = String(date.getUTCHours()).padStart(2, "0");
const minutes = String(date.getUTCMinutes()).padStart(2, "0");
const seconds = String(date.getUTCSeconds()).padStart(2, "0");
const millisecondsFormatted = String(date.getUTCMilliseconds()).padStart(
3,
"0"
);
return `${days}-${hours}:${minutes}:${seconds}:${millisecondsFormatted}`;
}

5
Software/data_src/static/js/popper.min.js vendored
View File

File diff suppressed because one or more lines are too long

27
Software/data_src/static/js/script.js
View File

@@ -1,27 +0,0 @@
$(document).ready(function () {
$(".navbar-nav a").on("click", function () {
$(".navbar-collapse").collapse("hide");
});
$("#show_hide_password a").on("click", function (event) {
event.preventDefault();
if ($("#show_hide_password input").attr("type") == "text") {
$("#show_hide_password input").attr("type", "password");
$("#show_hide_password i").addClass("fa-eye-slash");
$("#show_hide_password i").removeClass("fa-eye");
} else if ($("#show_hide_password input").attr("type") == "password") {
$("#show_hide_password input").attr("type", "text");
$("#show_hide_password i").removeClass("fa-eye-slash");
$("#show_hide_password i").addClass("fa-eye");
}
});
});
document
.querySelector(".custom-file-input")
.addEventListener("change", function (e) {
var fileName = document.getElementById("fw-update-file").files[0].name;
var nextSibling = e.target.nextElementSibling;
nextSibling.innerText = fileName;
});

233
Software/data_src/static/js/websocket.js
View File

@@ -1,233 +0,0 @@
var gateway = `ws://${window.location.hostname}/ws`;
var websocket;
var statusMapping;
var staticMapping;
var overlay;
document.addEventListener("DOMContentLoaded", function () {
// Ihr JavaScript-Code hier, einschließlich der onLoad-Funktion
overlay = document.getElementById("overlay");
onLoad();
});
function initWebSocket() {
console.log("Trying to open a WebSocket connection...");
websocket = new WebSocket(gateway);
websocket.onopen = onOpen;
websocket.onclose = onClose;
websocket.onmessage = onMessage; // <-- add this line
}
function initButtons() {
var elements = document.getElementsByClassName("btn-wsevent");
if (elements.length > 0) {
for (var i = 0; i < elements.length; i++) {
let element = elements[i];
element.addEventListener("click", sendButton);
}
}
}
function initSettingInputs() {
var elements = document.getElementsByClassName("set-wsevent");
if (elements.length > 0) {
for (var i = 0; i < elements.length; i++) {
let element = elements[i];
element.addEventListener("change", function () {
websocket_sendevent("set-" + element.id, element.value);
});
}
}
}
function onOpen(event) {
console.log("Connection opened");
}
function onClose(event) {
console.log("Connection closed");
setTimeout(initWebSocket, 1000);
overlay.style.display = "flex";
}
function sendButton(event) {
var targetElement = event.target;
if (
targetElement.classList.contains("confirm") &&
window.confirm("Sicher?") == false
)
return;
websocket_sendevent("btn-" + targetElement.id, targetElement.value);
}
function onMessage(event) {
var data = event.data;
if (data.startsWith("NOTIFY:")) {
var notify_data = data.slice(7).split(";")[1];
var notify_type = data.slice(7).split(";")[0];
showNotification(notify_data, notify_type);
} else if (data.startsWith("DEBUG:")) {
var addtext = data.slice(6);
var livedebug_out = document.getElementById("livedebug-out");
livedebug_out.value += addtext;
livedebug_out.scrollTop = livedebug_out.scrollHeight;
do_resize(livedebug_out);
} else if (data.startsWith("DTC:")) {
const dtcs = data.slice(4);
const dtcArray = dtcs.trim() !== "" ? dtcs.split(";").filter(Boolean) : [];
processDTCNotifications(dtcArray);
fillDTCTable(dtcArray);
} else if (data.startsWith("MAPPING_STATUS:")) {
const data_sliced = data.slice(15);
statusMapping = createMapping(data_sliced);
} else if (data.startsWith("MAPPING_STATIC:")) {
const data_sliced = data.slice(15);
staticMapping = createMapping(data_sliced);
console.log(staticMapping);
} else if (data.startsWith("STATUS:")) {
const data_sliced = data.slice(7);
const result = processDataString(data_sliced, statusMapping);
fillValuesToHTML(result);
} else if (data.startsWith("STATIC:")) {
const data_sliced = data.slice(7);
const result = processDataString(data_sliced, staticMapping);
fillValuesToHTML(result);
console.log(result);
overlay.style.display = "none";
}
}
function createMapping(mappingString) {
const mappingArray = mappingString.split(";");
const mapping = [];
mappingArray.forEach((variable) => {
if (variable !== null) mapping.push(variable.trim());
});
return mapping;
}
function processDataString(dataString, mapping) {
const valuesArray = dataString.split(";");
const dataObject = {};
valuesArray.forEach((value, index) => {
const variable = mapping[index];
if (variable) {
dataObject[variable] = value.trim();
}
});
return dataObject;
}
function onLoad(event) {
initWebSocket();
initButtons();
initSettingInputs();
overlay.style.display = "flex";
}
function websocket_sendevent(element_id, element_value) {
websocket.send(element_id + ":" + element_value);
}
function do_resize(textbox) {
var maxrows = 15;
var minrows = 3;
var txt = textbox.value;
var cols = textbox.cols;
var arraytxt = txt.split("\n");
var rows = arraytxt.length;
for (i = 0; i < arraytxt.length; i++)
rows += parseInt(arraytxt[i].length / cols);
if (rows > maxrows) textbox.rows = maxrows;
else if (rows < minrows) textbox.rows = minrows;
else textbox.rows = rows;
}
function fillValuesToHTML(dataset) {
for (var key in dataset) {
var key_prefixed = "data-" + key;
var elements = document.getElementsByClassName(key_prefixed);
if (elements.length > 0) {
for (var i = 0; i < elements.length; i++) {
var element = elements[i];
if (element.type === "checkbox") {
// Wenn das Element ein Kontrollkästchen ist
element.checked = dataset[key] == 1 ? true : false;
} else if (element.tagName === "SELECT") {
// Wenn das Element ein Dropdown ist
setDropdownValue(element, dataset[key]);
} else if (element.classList.contains("progress-bar")) {
// Wenn das Element eine Fortschrittsleiste ist
updateProgressBar(element, dataset[key]);
} else if (element.classList.contains("hideable")) {
// Wenn das Element ein Settingsabschnitt-div ist
if (dataset[key] == 0) element.style.display = "none";
else element.style.display = "";
} else {
// Standardmäßig für Textfelder und andere Elemente
element.value = dataset[key];
}
}
}
}
}
// Funktion zum Setzen des ausgewählten Werts für Dropdowns
function setDropdownValue(selectElement, value) {
for (var i = 0; i < selectElement.options.length; i++) {
if (selectElement.options[i].value === value) {
selectElement.selectedIndex = i;
break;
}
}
}
// Funktion zum Aktualisieren der Fortschrittsleiste
function updateProgressBar(progressBar, value) {
// Wert in das aria-valuenow-Attribut einfügen
progressBar.setAttribute("aria-valuenow", value);
// Breite des Fortschrittsbalkens und inneren Text aktualisieren
progressBar.style.width = value + "%";
progressBar.textContent = value + "%";
}
function showNotification(message, type) {
// Erstellen Sie ein Bootstrap-Alert-Element
var alertElement = $(
'<div class="alert alert-' +
type +
' alert-dismissible fade show notification" role="alert">' +
"<strong>" +
message +
"</strong>" +
'<button type="button" class="close" data-dismiss="alert" aria-label="Close">' +
'<span aria-hidden="true">&times;</span>' +
"</button>" +
"</div>"
);
// Fügen Sie das Alert-Element dem Container hinzu
$("#notification-container").append(alertElement);
// Nach 5 Sekunden das Alert-Element ausblenden
setTimeout(function () {
alertElement.alert("close");
}, 5000);
}

1
Software/data_src/version
View File

@@ -1 +0,0 @@
1.05

64
Software/include/common.h
View File

@@ -1,64 +0,0 @@
#ifndef _COMMON_H_
#define _COMMON_H_
#include <stdint.h>
#include <stddef.h>
#define Q(x) #x
#define QUOTE(x) Q(x)
#define SET_BIT(value, bitPosition) ((value) |= (1U << (bitPosition)))
#define TRUE 1
#define FALSE 0
#ifndef HOST_NAME
#define HOST_NAME "AirsoftTimer_%08X"
#endif
#define SHUTDOWN_DELAY_MS 5000
#define STARTUP_DELAY_MS 20000
#define GPIO_LORA_TX D3
#define GPIO_LORA_RX D4
#define GPIO_LORA_AUX D0
#define GPIO_7SEG_EN_FAC1 D7
#define GPIO_7SEG_EN_FAC2 D6
#define GPIO_7SEG_EN_FAC3 D5
#define GPIO_7SEG_CLK D8
#define I2C_IO_BTN_FAC1 0
#define FAC_1_TRG_PRESSED LOW
#define I2C_IO_BTN_FAC2 1
#define FAC_2_TRG_PRESSED LOW
#define I2C_IO_BTN_FAC3 2
#define FAC_3_TRG_PRESSED LOW
#define I2C_IO_LORA_M0 4
#define I2C_IO_LORA_M1 3
#define EEPROM_TYPE 24LC64
#define I2C_IO_ADDRESS 0x38
#define I2C_POWER_ADDRESS 0x40
#define I2C_EEPROM_ADDRESS 0x50
#ifndef OTA_DELAY
#define OTA_DELAY 50 // ticks -> 10ms / tick
#endif
typedef enum eSystem_Status
{
sysStat_Startup,
sysStat_Normal,
sysStat_Rain,
sysStat_Purge,
sysStat_Error,
sysStat_Shutdown
} tSystem_Status;
#define STARTUP_DELAY 2500
#define SHUTDOWN_DELAY_MS 2500
#endif

58
Software/include/debugger.h
View File

@@ -1,58 +0,0 @@
/**
* @file debugger.h
*
* @brief Header file for debugging functions and status in the DE-Timer application.
*
* This file declares functions and status definitions for debugging purposes in the DE-Timer project.
* It includes functions to print system information, WiFi information, format EEPROM data,
* handle debug messages, and manage the status of different debug ports.
*
* @author Marcel Peterkau
* @date 09.01.2024
*/
#ifndef _DEBUGGER_H_
#define _DEBUGGER_H_
#include <Arduino.h>
#include "webui.h"
const char PROGMEM helpCmd[] = "sysinfo - System Info\n"
"netinfo - WiFi Info\n"
"formatPDS - Format Persistence EEPROM Data\n"
"formatCFG - Format Configuration EEPROM Data\n"
"checkEE - Check EEPROM with checksum\n"
"dumpEE1k - dump the first 1kb of EEPROM to Serial\n"
"dumpEE - dump the whole EPPROM to Serial\n"
"resetPageEE - Reset the PersistenceData Page\n"
"dumpCFG - print Config struct\n"
"dumpPDS - print PersistanceStruct\n"
"saveEE - save EE-Data\n"
"showdtc - Show all DTCs\n"
"dumpGlobals - print globals\n";
typedef enum DebugStatus_e
{
disabled,
enabled
} DebugStatus_t;
typedef enum DebugPorts_e
{
dbg_Serial,
dbg_Webui,
dbg_cntElements
} DebugPorts_t;
const char sDebugPorts[dbg_cntElements][7] = {
"Serial",
"WebUI"};
extern DebugStatus_t DebuggerStatus[dbg_cntElements];
void initDebugger();
void pushCANDebug(uint32_t id, uint8_t dlc, uint8_t *data);
void Debug_pushMessage(const char *format, ...);
void SetDebugportStatus(DebugPorts_t port, DebugStatus_t status);
void Debug_Process();
#endif

39
Software/include/dtc.h
View File

@@ -1,39 +0,0 @@
/**
* @file dtc.h
*
* @brief Header file for handling Diagnostic Trouble Codes (DTC) in the DE-Timer application.
*
* This file provides definitions and functions for handling Diagnostic Trouble Codes (DTC)
* in the DE-Timer project. It includes structures for DTC entries, severity levels,
* and functions for DTC maintenance and processing. DTCs are used to track system errors and issues.
*
* @author Marcel Peterkau
* @date 09.01.2024
*/
#ifndef _DTC_H_
#define _DTC_H_
#include <Arduino.h>
#include "dtc_defs.h"
#define MAX_DTC_STORAGE 12
typedef struct
{
DTCNum_t Number;
uint32_t timestamp;
DTCActive_t active;
uint32_t debugVal;
} DTCEntry_t;
void MaintainDTC(DTCNum_t DTC_no, boolean active, uint32_t DebugValue = 0);
void ClearDTC(DTCNum_t DTC_no);
void ClearAllDTC();
DTCNum_t getlastDTC(boolean only_active);
DTCNum_t ActiveDTCseverity(DTCSeverity_t severity);
DTCSeverity_t getSeverityForDTC(DTCNum_t targetCode);
void DTC_Process();
extern DTCEntry_t DTCStorage[MAX_DTC_STORAGE];
#endif

85
Software/include/dtc_defs.h
View File

@@ -1,85 +0,0 @@
/**
* @file dtc_defs.h
*
* @brief Header file for Diagnostic Trouble Code (DTC) definitions in the DE-Timer application.
*
* This file contains definitions for Diagnostic Trouble Codes (DTC) in the DE-Timer project.
* It includes enums for DTC active status, severity levels, and specific DTC codes.
* The file also defines an array of DTC definitions and a timestamp indicating the generation time.
*
* @note This file is auto-generated by a script on 2024-05-30 21:56:51.
*
* @author Marcel Peterkau
* @date 30.05.2024
*/
#ifndef DTC_DEFS_H
#define DTC_DEFS_H
#include <stdint.h>
typedef uint32_t DTCNum_t;
typedef enum
{
DTC_INACTIVE,
DTC_ACTIVE,
DTC_PREVIOUS
} DTCActive_t;
typedef enum
{
DTC_NONE,
DTC_INFO,
DTC_WARN,
DTC_CRITICAL
} DTCSeverity_t;
typedef struct {
DTCNum_t code;
DTCSeverity_t severity;
} DTC_t;
#define DTC_NO_DTC 0
#define DTC_BAT_CRITICAL 1
#define DTC_BAT_LOW 2
#define DTC_NO_EEPROM_FOUND 3
#define DTC_EEPROM_CFG_BAD 4
#define DTC_EEPROM_PDS_BAD 5
#define DTC_EEPROM_PDSADRESS_BAD 6
#define DTC_EEPROM_VERSION_BAD 7
#define DTC_FLASHFS_ERROR 8
#define DTC_FLASHFS_VERSION_ERROR 9
#define DTC_NO_BATMNON_FOUND 10
#define DTC_NO_LORA_FOUND 11
#define DTC_EEPROM_CFG_SANITY 12
#define DTC_EEPROM_MIGRATE_FAILED 13
#define DTC_FAKE_DTC_INFO 14
#define DTC_FAKE_DTC_WARN 15
#define DTC_FAKE_DTC_CRIT 16
#define DTC_LAST_DTC 17
const DTC_t dtc_definitions[] = {
{ DTC_NO_DTC , DTC_NONE }, // No Error
{ DTC_BAT_CRITICAL , DTC_CRITICAL }, // Akku ist komplett leer. Den Akku aufladen!
{ DTC_BAT_LOW , DTC_WARN }, // Akku ist unter der Warnschwelle. Den Akku demnächst aufladen
{ DTC_NO_EEPROM_FOUND , DTC_CRITICAL }, // Es wurde kein EEPROM gefunden. Dies lässt einen Hardware-Defekt vermuten.
{ DTC_EEPROM_CFG_BAD , DTC_CRITICAL }, // Die Checksumme der Config-Partition des EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'CFG' im Menu 'Wartung' zurück
{ DTC_EEPROM_PDS_BAD , DTC_CRITICAL }, // Die Checksumme der Betriebsdaten-Partition des EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'PDS' im Menu 'Wartung' zurück
{ DTC_EEPROM_PDSADRESS_BAD , DTC_CRITICAL }, // Die Adresse der Betriebsdaten-Partition im EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'PDS' im Menu 'Wartung' zurück
{ DTC_EEPROM_VERSION_BAD , DTC_CRITICAL }, // Die Layout-Version des EEPROM stimmt nicht mit der Firmware-Version überein. Setzen sie den EEPROM-Bereich 'CFG' im Menu 'Wartung' zurück
{ DTC_FLASHFS_ERROR , DTC_CRITICAL }, // Der Flashspeicher konnte nicht initialisiert werden. Aktualisieren sie Flash & Firmware
{ DTC_FLASHFS_VERSION_ERROR , DTC_CRITICAL }, // Die Version des Flashspeicher stimmt nicht mit der Firmware-Version überein. Aktualisieren sie den Flash mit der passenden Update-Datei
{ DTC_NO_BATMNON_FOUND , DTC_CRITICAL }, // Es wurde keine Akkuüberwachung über I2C gefunden, Prüfen sie die Hardware!
{ DTC_NO_LORA_FOUND , DTC_CRITICAL }, // Es konnte keine Verbindung zum LoRa-Transceiver hergestellt werden. Prüfen Sie die Hardware auf Defekte
{ DTC_EEPROM_CFG_SANITY , DTC_WARN }, // Ein oder mehrer Einstellungswerte sind ausserhalb plausibler Werte. Prüfen Sie Ihre Einstellungen
{ DTC_EEPROM_MIGRATE_FAILED , DTC_CRITICAL }, // Es wurde ein altes EEPROm Image erkannt, konnte aber nicht migriert werden. EEPROM manuell zurück setzen und neue Einstellunge speichern.
{ DTC_FAKE_DTC_INFO , DTC_INFO }, // Ein Dummy-DTC der Schwere "Info" für Debugging-Zwecke
{ DTC_FAKE_DTC_WARN , DTC_WARN }, // Ein Dummy-DTC der Schwere "Warnung" für Debugging-Zwecke
{ DTC_FAKE_DTC_CRIT , DTC_CRITICAL }, // Ein Dummy-DTC der Schwere "Kritisch" für Debugging-Zwecke
{ DTC_LAST_DTC , DTC_NONE } // Last Error
};
#endif // DTC_DEFS_H
// CODEGENERATOR_CHECKSUM: 313d59949b074024df3c5d796f65e3bd518e34f0bb171185c30f008f21c19d30

124
Software/include/eeprom.h
View File

@@ -1,124 +0,0 @@
/**
* @file eeprom.h
*
* @brief Header file for configuration settings and EEPROM operations in the DE-Timer application.
*
* This file defines configuration settings for the DE-Timer project, including default values,
* EEPROM structures, and functions for EEPROM operations. It also defines enums for different Battery Types.
* Additionally, it includes functions for EEPROM handling such as storing, retrieving, and formatting configuration data.
*
* @author Marcel Peterkau
* @date 09.01.2024
*/
#ifndef _EEPROM_H_
#define _EEPROM_H_
#include <Arduino.h>
#include <Wire.h>
#include <I2C_eeprom.h>
#include "dtc.h"
#include "common.h"
#define I2C_EE_ADDRESS 0x50
#define EEPROM_STRUCTURE_REVISION 4 // Increment this version when changing EEPROM structures
#define EEPROM_SIZE_BYTES I2C_DEVICESIZE_24LC256
typedef enum Factions_e
{
NONE,
FACTION_1,
FACTION_2,
FACTION_3
} Factions_t;
typedef enum EERequest_e
{
EE_IDLE,
EE_CFG_SAVE,
EE_CFG_LOAD,
EE_CFG_FORMAT,
EE_PDS_SAVE,
EE_PDS_LOAD,
EE_PDS_FORMAT,
EE_FORMAT_ALL,
EE_ALL_SAVE
} EERequest_t;
// Structure for persistence data stored in EEPROM
typedef struct
{
uint32_t writeCycleCounter;
uint32_t faction_1_timer;
uint32_t faction_2_timer;
uint32_t faction_3_timer;
Factions_t activeFaction;
uint32_t checksum;
} persistenceData_t;
typedef enum
{
BATTERY_UNDEFINED,
BATTERY_LIPO_2S,
BATTERY_LIPO_3S
} batteryType_t;
const char BatteryString[][10]{
"Undefined",
"LiPo 2S",
"LiPo 3S"};
const size_t BatteryString_Elements = sizeof(BatteryString) / sizeof(BatteryString[0]);
// Structure for configuration settings stored in EEPROM
typedef struct
{
uint8_t EEPROM_Version;
batteryType_t batteryType;
bool active_faction_on_reboot;
char Faction_1_Name[33];
char Faction_2_Name[33];
char Faction_3_Name[33];
char wifi_ap_ssid[33];
char wifi_ap_password[64];
char wifi_client_ssid[33];
char wifi_client_password[64];
bool wifi_autoconnect;
uint32_t checksum;
} configData_t;
// Default configuration settings
const configData_t ConfigData_defaults = {
2, // EEPROM_Version (incerease this if anything on Layout changes!)
BATTERY_LIPO_3S, // batteryType
false, // active_faction_on_reboot
"FACTION 1", // Faction_1_Name
"FACTION 2", // Faction_2_Name
"FACTION 3", // Faction_3_Name
"ArisoftTimer",
QUOTE(WIFI_AP_PASSWORD),
QUOTE(WIFI_SSID_CLIENT),
QUOTE(WIFI_PASSWORD_CLIENT),
true,
0 // checksum
};
void InitEEPROM();
void EEPROM_Process();
void StoreConfig_EEPROM();
void GetConfig_EEPROM();
void StorePersistence_EEPROM();
void GetPersistence_EEPROM();
void FormatConfig_EEPROM();
void FormatPersistence_EEPROM();
uint32_t Checksum_EEPROM(uint8_t const *data, size_t len);
void dumpEEPROM(uint16_t memoryAddress, uint16_t length);
void MovePersistencePage_EEPROM(boolean reset);
uint32_t ConfigSanityCheck(bool autocorrect = false);
bool validateWiFiString(char *string, size_t size);
extern configData_t ConfigData;
extern persistenceData_t PersistenceData;
extern uint16_t eePersistenceMarker;
#endif // _CONFIG_H_

44
Software/include/globals.h
View File

@@ -1,44 +0,0 @@
#ifndef _GLOBALS_H_
#define _GLOBALS_H_
#include <Arduino.h>
#include "eeprom.h"
#include "common.h"
typedef struct Globals_s
{
tSystem_Status systemStatus = sysStat_Startup; /**< Current system status */
tSystem_Status resumeStatus = sysStat_Startup; /**< Status to resume after rain mode */
char systemStatustxt[16] = ""; /**< Text representation of system status */
EERequest_t requestEEAction = EE_IDLE; /**< EEPROM-related request */
char DeviceName[33]; /**< Device name */
char FlashVersion[10]; /**< Flash version */
uint16_t eePersistanceAdress; /**< EEPROM persistence address */
bool hasDTC;
int loadvoltage_mV = 0;
int battery_level = 0;
bool timer_disabled = false;
} Globals_t;
extern Globals_t globals; /**< Global variable struct */
typedef struct Constants_s
{
uint8_t FW_Version_major; /**< Firmware version major number */
uint8_t FW_Version_minor; /**< Firmware version minor number */
uint8_t Required_Flash_Version_major; /**< Required flash version major number */
uint8_t Required_Flash_Version_minor; /**< Required flash version minor number */
char GitHash[11]; /**< Git hash string */
} Constants_t;
const Constants_t constants PROGMEM = {
1, 5, // Firmware_Version
1, 5, // Required Flash Version
GIT_REV // Git-Hash-String
};
/**
* @brief Initializes global variables.
*/
void initGlobals();
#endif // _GLOBALS_H_

30
Software/include/lora_messages.h
View File

@@ -1,30 +0,0 @@
#ifndef _LORA_MESSAGES_H_
#define _LORA_MESSAGES_H_
#define MESSAGES_VERSION 1.0
#include <stdint.h>
typedef char MessageType_t[8];
typedef uint16_t NodeID_t;
typedef struct
{
NodeID_t nodeid;
uint32_t millis;
uint8_t faction_active;
uint32_t faction_1_timer;
uint32_t faction_2_timer;
uint32_t faction_3_timer;
} __attribute__((packed)) MessageStatus_t;
typedef struct
{
NodeID_t nodeid;
bool gpsfix;
double latitude;
double longitude;
double altitude;
} __attribute__((packed)) MessagePosition_t;
#endif

27
Software/include/lora_net.h
View File

@@ -1,27 +0,0 @@
#ifndef _LORA_NET_H_
#define _LORA_NET_H_
#include <Arduino.h>
#ifdef LORA_FEATURE_ENABLED
#include <LoRa_E220.h>
#elif defined(FEATURE_ENABLE_UARTLORA)
#include <SoftwareSerial.h>
#endif
// local includes
#include "lora_messages.h"
#include "debugger.h"
#include "defaults.h"
#include "config.h"
#include "globals.h"
#include "dtc.h"
#include "common.h"
#define FREQUENCY_868
bool InitLoRa(void (*MPinHelper)(int, int));
void LoRa_Process();
void sendStatus_LoRa();
#endif

31
Software/include/sanitycheck.h
View File

@@ -1,31 +0,0 @@
#ifndef _SANITYCHECK_H_
#define _SANITYCHECK_H_
#ifndef ADMIN_PASSWORD
#error "You need to define ADMIN_PASSWORD for OTA-Update"
#endif
#ifndef WIFI_AP_SSID
#warning "No WIFI_AP_SSID defined. Using DeviceName"
#define WIFI_AP_SSID DEVICE_NAME
#endif
#ifndef WIFI_AP_PASSWORD
#error "You must define an WIFI_AP_PASSWORD for Standalone AP-Mode"
#endif
#if defined(FEATURE_ENABLE_UARTLORA) && defined(FEATURE_ENABLE_LORA)
#error "You cannot enable LoRa and UART-Protocol at the same time!"
#endif
#ifdef FEATURE_ENABLE_WIFI_CLIENT
#ifndef WIFI_CLIENT_PASSWORD
#error "You must define an WIFI_PASSWORD for OTA-Update"
#endif
#ifndef WIFI_CLIENT_SSID
#error "You must define an WIFI_SSID for OTA-Update"
#endif
#endif
#endif //_SANITYCHECK_H_

26
Software/include/struct2json.h
View File

@@ -1,26 +0,0 @@
/**
* @file struct2json.h
*
* @brief Header file for converting structs to JSON objects.
*
* @note This file is auto-generated by a script on 2024-05-30 22:54:25.
*
* @author Marcel Peterkau
* @date 30.05.2024
*/
#ifndef _STRUCT2JSON_H_
#define _STRUCT2JSON_H_
#include <Arduino.h>
#include <ArduinoJson.h>
#include "eeprom.h"
void generateJsonObject_ConfigData(JsonObject data);
void generateJsonObject_PersistenceData(JsonObject data);
#endif /* _STRUCT2JSON_H_ */
// CODEGENERATOR_CHECKSUM: 735cd4daf9a46bd773bdf5e6cd5a58d61b0d877196399bc2784a0d0ea7af717d

49
Software/include/webui.h
View File

@@ -1,49 +0,0 @@
/**
* @file webui.h
*
* @brief Header file for the web-based user interface (WebUI) in the DE-Timer application.
*
* This file contains declarations for functions related to the initialization and processing of the
* web-based user interface (WebUI). It includes the necessary libraries and dependencies for handling
* web server functionality, asynchronous JSON operations, and live debugging through WebSockets.
*
* @author Marcel Peterkau
* @date 09.01.2024
*/
#ifndef _WEBUI_H_
#define _WEBUI_H_
#include <Arduino.h>
#include <FS.h>
#include <LittleFS.h>
#include <ESPAsyncTCP.h>
#include <ESPAsyncWebServer.h>
#include <Updater.h>
#include <ESP8266mDNS.h>
#include <AsyncJson.h>
#include <ArduinoJson.h>
#include "config.h"
#include "globals.h"
#include "dtc.h"
#include "common.h"
#include "debugger.h"
#include "struct2json.h"
typedef enum
{
info,
success,
warning,
error
} NotificationType_t;
void initWebUI();
void Webserver_Process();
void Webserver_Shutdown();
void Websocket_PushLiveDebug(String Message);
void Websocket_PushNotification(String Message, NotificationType_t type);
#endif // _WEBUI_H_

1
Software/lib/EByte LoRa E220 library/.gitattributes vendored
View File

@@ -1 +0,0 @@
resources export-ignore

1
Software/lib/EByte LoRa E220 library/.piopm
View File

@@ -1 +0,0 @@
{"type": "library", "name": "EByte LoRa E220 library", "version": "1.0.6", "spec": {"owner": "xreef", "id": 13661, "name": "EByte LoRa E220 library", "requirements": null, "uri": null}}

11
Software/lib/EByte LoRa E220 library/.project
View File

@@ -1,11 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<projectDescription>
<name>LoRa_E220_Series_Library</name>
<comment></comment>
<projects>
</projects>
<buildSpec>
</buildSpec>
<natures>
</natures>
</projectDescription>

35
Software/lib/EByte LoRa E220 library/EByte_LoRa_E220_library.h
View File

@@ -1,35 +0,0 @@
/*
* EBYTE LoRa E220 Series
* https://www.mischianti.org/category/my-libraries/lora-e22-devices/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Renzo Mischianti www.mischianti.org All right reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef EBYTE_LORA_E220_LIBRARY_H
#define EBYTE_LORA_E220_LIBRARY_H
#include "LoRa_E220.h"
#endif
#pragma once

24
Software/lib/EByte LoRa E220 library/LICENSE.md
View File

@@ -1,24 +0,0 @@
The MIT License (MIT)
Copyright (c) 2017 Renzo Mischianti www.mischianti.org All right reserved.
You may copy, alter and reuse this code in any way you like, but please leave
reference to www.mischianti.org in your comments if you redistribute this code.
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.

1051
Software/lib/EByte LoRa E220 library/LoRa_E220.cpp
View File

File diff suppressed because it is too large Load Diff

401
Software/lib/EByte LoRa E220 library/LoRa_E220.h
View File

@@ -1,401 +0,0 @@
/*
* EBYTE LoRa E220 Series
*
* AUTHOR: Renzo Mischianti
* VERSION: 1.0.6
*
* https://www.mischianti.org
*
* The MIT License (MIT)
*
* Copyright (c) 2022 Renzo Mischianti www.mischianti.org All right reserved.
*
* You may copy, alter and reuse this code in any way you like, but please leave
* reference to www.mischianti.org in your comments if you redistribute this code.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef LoRa_E220_h
#define LoRa_E220_h
#if !defined(ARDUINO_ARCH_STM32) && !defined(ESP32) && !defined(ARDUINO_ARCH_SAMD) && !defined(ARDUINO_ARCH_MBED) && !defined(__STM32F1__) && !defined(__STM32F4__)
#define ACTIVATE_SOFTWARE_SERIAL
#endif
#if defined(ESP32)
#define HARDWARE_SERIAL_SELECTABLE_PIN
#endif
#ifdef ACTIVATE_SOFTWARE_SERIAL
#include <SoftwareSerial.h>
#endif
#include <includes/statesNaming.h>
#if ARDUINO >= 100
#include "Arduino.h"
#else
#include "WProgram.h"
#endif
#define MAX_SIZE_TX_PACKET 200
// Uncomment to enable printing out nice debug messages.
//#define LoRa_E220_DEBUG
// Define where debug output will be printed.
#define DEBUG_PRINTER Serial
// Setup debug printing macros.
#ifdef LoRa_E220_DEBUG
#define DEBUG_PRINT(...) { DEBUG_PRINTER.print(__VA_ARGS__); }
#define DEBUG_PRINTLN(...) { DEBUG_PRINTER.println(__VA_ARGS__); }
#else
#define DEBUG_PRINT(...) {}
#define DEBUG_PRINTLN(...) {}
#endif
enum MODE_TYPE {
MODE_0_NORMAL = 0,
MODE_0_TRANSMISSION = 0,
MODE_1_WOR_TRANSMITTER = 1,
MODE_1_WOR = 1,
MODE_2_WOR_RECEIVER = 2,
MODE_2_POWER_SAVING = 2,
MODE_3_CONFIGURATION = 3,
MODE_3_PROGRAM = 3,
MODE_3_SLEEP = 3,
MODE_INIT = 0xFF
};
enum PROGRAM_COMMAND {
WRITE_CFG_PWR_DWN_SAVE = 0xC0,
READ_CONFIGURATION = 0xC1,
WRITE_CFG_PWR_DWN_LOSE = 0xC2,
WRONG_FORMAT = 0xFF,
RETURNED_COMMAND = 0xC1,
SPECIAL_WIFI_CONF_COMMAND = 0xCF
};
enum REGISTER_ADDRESS {
REG_ADDRESS_CFG = 0x00,
REG_ADDRESS_SPED = 0x02,
REG_ADDRESS_TRANS_MODE = 0x03,
REG_ADDRESS_CHANNEL = 0x04,
REG_ADDRESS_OPTION = 0x05,
REG_ADDRESS_CRYPT = 0x06,
REG_ADDRESS_PID = 0x08
};
enum PACKET_LENGHT {
PL_CONFIGURATION = 0x08,
PL_SPED = 0x01,
PL_OPTION = 0x01,
PL_TRANSMISSION_MODE= 0x01,
PL_CHANNEL = 0x01,
PL_CRYPT = 0x02,
PL_PID = 0x03
};
#pragma pack(push, 1)
struct Speed {
uint8_t airDataRate :3; //bit 0-2
String getAirDataRateDescription() {
return getAirDataRateDescriptionByParams(this->airDataRate);
}
uint8_t uartParity :2; //bit 3-4
String getUARTParityDescription() {
return getUARTParityDescriptionByParams(this->uartParity);
}
uint8_t uartBaudRate :3; //bit 5-7
String getUARTBaudRateDescription() {
return getUARTBaudRateDescriptionByParams(this->uartBaudRate);
}
};
struct TransmissionMode {
byte WORPeriod :3; //bit 2,1,0
String getWORPeriodByParamsDescription() {
return getWORPeriodByParams(this->WORPeriod);
}
byte reserved2 :1; //bit 3
byte enableLBT :1; //bit 4
String getLBTEnableByteDescription() {
return getLBTEnableByteByParams(this->enableLBT);
}
byte reserved :1; //bit 5
byte fixedTransmission :1; //bit 6
String getFixedTransmissionDescription() {
return getFixedTransmissionDescriptionByParams(this->fixedTransmission);
}
byte enableRSSI :1; //bit 7
String getRSSIEnableByteDescription() {
return getRSSIEnableByteByParams(this->enableRSSI);
}
};
struct Option {
uint8_t transmissionPower :2; //bit 0-1
String getTransmissionPowerDescription() {
return getTransmissionPowerDescriptionByParams(this->transmissionPower);
}
uint8_t reserved :3; //bit 2-4
uint8_t RSSIAmbientNoise :1; //bit 5
String getRSSIAmbientNoiseEnable() {
return getRSSIAmbientNoiseEnableByParams(this->RSSIAmbientNoise);
}
uint8_t subPacketSetting :2; //bit 6-7
String getSubPacketSetting() {
return getSubPacketSettingByParams(this->subPacketSetting);
}
};
struct Crypt {
byte CRYPT_H = 0;
byte CRYPT_L = 0;
};
struct Configuration {
byte COMMAND = 0;
byte STARTING_ADDRESS = 0;
byte LENGHT = 0;
byte ADDH = 0;
byte ADDL = 0;
struct Speed SPED;
struct Option OPTION;
byte CHAN = 0;
String getChannelDescription() {
return String(this->CHAN + OPERATING_FREQUENCY) + F("MHz");
}
struct TransmissionMode TRANSMISSION_MODE;
struct Crypt CRYPT;
};
struct ModuleInformation {
byte COMMAND = 0;
byte STARTING_ADDRESS = 0;
byte LENGHT = 0;
byte model = 0;
byte version = 0;
byte features = 0;
};
struct ResponseStatus {
Status code;
String getResponseDescription() {
return getResponseDescriptionByParams(this->code);
}
};
struct ResponseStructContainer {
void *data;
byte rssi;
ResponseStatus status;
void close() {
free(this->data);
}
};
struct ResponseContainer {
String data;
byte rssi;
ResponseStatus status;
};
struct ConfigurationMessage
{
byte specialCommand1 = 0xCF;
byte specialCommand2 = 0xCF;
unsigned char message[];
};
//struct FixedStransmission {
// byte ADDL = 0;
// byte ADDH = 0;
// byte CHAN = 0;
// void *message;
//};
#pragma pack(pop)
class LoRa_E220 {
public:
#ifdef ACTIVATE_SOFTWARE_SERIAL
LoRa_E220(byte txE220pin, byte rxE220pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
LoRa_E220(byte txE220pin, byte rxE220pin, byte auxPin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
LoRa_E220(byte txE220pin, byte rxE220pin, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
#endif
LoRa_E220(HardwareSerial* serial, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
LoRa_E220(HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
LoRa_E220(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
#ifdef HARDWARE_SERIAL_SELECTABLE_PIN
LoRa_E220(byte txE220pin, byte rxE220pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
LoRa_E220(byte txE220pin, byte rxE220pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
LoRa_E220(byte txE220pin, byte rxE220pin, HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
#endif
#ifdef ACTIVATE_SOFTWARE_SERIAL
LoRa_E220(SoftwareSerial* serial, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
LoRa_E220(SoftwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
LoRa_E220(SoftwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
#endif
// LoRa_E220(byte txE220pin, byte rxE220pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600, MODE_TYPE mode = MODE_0_NORMAL);
// LoRa_E220(HardwareSerial* serial = &Serial, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600, MODE_TYPE mode = MODE_0_NORMAL);
// LoRa_E220(SoftwareSerial* serial, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600, MODE_TYPE mode = MODE_0_NORMAL);
bool begin();
Status setMode(MODE_TYPE mode);
MODE_TYPE getMode();
ResponseStructContainer getConfiguration();
ResponseStatus setConfiguration(Configuration configuration, PROGRAM_COMMAND saveType = WRITE_CFG_PWR_DWN_LOSE);
ResponseStructContainer getModuleInformation();
ResponseStatus resetModule();
ResponseStatus sendMessage(const void *message, const uint8_t size);
ResponseContainer receiveMessageUntil(char delimiter = '\0');
ResponseStructContainer receiveMessage(const uint8_t size);
ResponseStructContainer receiveMessageRSSI(const uint8_t size);
ResponseStructContainer receiveMessageComplete(const uint8_t size, bool enableRSSI);
ResponseContainer receiveMessageComplete(bool enableRSSI);
ResponseStatus sendMessage(const String message);
ResponseContainer receiveMessage();
ResponseContainer receiveMessageRSSI();
ResponseStatus sendFixedMessage(byte ADDH, byte ADDL, byte CHAN, const String message);
ResponseStatus sendFixedMessage(byte ADDH,byte ADDL, byte CHAN, const void *message, const uint8_t size);
ResponseStatus sendBroadcastFixedMessage(byte CHAN, const void *message, const uint8_t size);
ResponseStatus sendBroadcastFixedMessage(byte CHAN, const String message);
ResponseContainer receiveInitialMessage(const uint8_t size);
ResponseStatus sendConfigurationMessage( byte ADDH,byte ADDL, byte CHAN, Configuration *configuration, PROGRAM_COMMAND programCommand = WRITE_CFG_PWR_DWN_SAVE);
int available();
void (*setMPins)(int, int);
private:
HardwareSerial* hs;
#ifdef ACTIVATE_SOFTWARE_SERIAL
SoftwareSerial* ss;
#endif
bool isSoftwareSerial = true;
int8_t txE220pin = -1;
int8_t rxE220pin = -1;
int8_t auxPin = -1;
#ifdef HARDWARE_SERIAL_SELECTABLE_PIN
uint32_t serialConfig = SERIAL_8N1;
#endif
int8_t m0Pin = -1;
int8_t m1Pin = -1;
unsigned long halfKeyloqKey = 0x06660708;
unsigned long encrypt(unsigned long data);
unsigned long decrypt(unsigned long data);
UART_BPS_RATE bpsRate = UART_BPS_RATE_9600;
struct NeedsStream {
template<typename T>
void begin(T &t, uint32_t baud) {
DEBUG_PRINTLN("Begin ");
t.setTimeout(500);
t.begin(baud);
stream = &t;
}
#ifdef HARDWARE_SERIAL_SELECTABLE_PIN
// template< typename T >
// void begin( T &t, uint32_t baud, SerialConfig config ){
// DEBUG_PRINTLN("Begin ");
// t.setTimeout(500);
// t.begin(baud, config);
// stream = &t;
// }
//
template< typename T >
void begin( T &t, uint32_t baud, uint32_t config ) {
DEBUG_PRINTLN("Begin ");
t.setTimeout(500);
t.begin(baud, config);
stream = &t;
}
template< typename T >
void begin( T &t, uint32_t baud, uint32_t config, int8_t txE220pin, int8_t rxE220pin ) {
DEBUG_PRINTLN("Begin ");
t.setTimeout(500);
t.begin(baud, config, txE220pin, rxE220pin);
stream = &t;
}
#endif
void listen() {}
Stream *stream;
};
NeedsStream serialDef;
MODE_TYPE mode = MODE_0_NORMAL;
void managedDelay(unsigned long timeout);
Status waitCompleteResponse(unsigned long timeout = 1000, unsigned int waitNoAux = 100);
void flush();
void cleanUARTBuffer();
Status sendStruct(void *structureManaged, uint16_t size_);
Status receiveStruct(void *structureManaged, uint16_t size_);
void writeProgramCommand(PROGRAM_COMMAND cmd, REGISTER_ADDRESS addr, PACKET_LENGHT pl);
RESPONSE_STATUS checkUARTConfiguration(MODE_TYPE mode);
#ifdef LoRa_E220_DEBUG
void printParameters(struct Configuration *configuration);
#endif
};
#endif

1090
Software/lib/EByte LoRa E220 library/README.md
View File

File diff suppressed because it is too large Load Diff

138
Software/lib/EByte LoRa E220 library/examples/01_getConfiguration/01_getConfiguration.ino
View File

@@ -1,138 +0,0 @@
/*
* LoRa E220
* Get configuration.
* You must uncommend the correct constructor.
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- Raspberry Pi Pico ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or 3.3v) ----- 19 (or 3.3v) ----- 4 (or 3.3v) ----- 2 (or 3.3v) ----- 10 (or 3.3v) ----- PB0 (or 3.3v) ----- 7 Volt div (or 3.3v)
* M1 ----- D6 (or 3.3v) ----- 21 (or 3.3v) ----- 6 (or 3.3v) ----- 4 (or 3.3v) ----- 11 (or 3.3v) ----- PB10 (or 3.3v) ----- 6 Volt div (or 3.3v)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- 8 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- 9 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- 2 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------- Raspberry PI Pico pins --------------
// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); // RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
void printParameters(struct Configuration configuration);
void printModuleInformation(struct ModuleInformation moduleInformation);
void setup() {
Serial.begin(9600);
while(!Serial){};
delay(500);
Serial.println();
// Startup all pins and UART
e220ttl.begin();
ResponseStructContainer c;
c = e220ttl.getConfiguration();
// It's important get configuration pointer before all other operation
Configuration configuration = *(Configuration*) c.data;
Serial.println(c.status.getResponseDescription());
Serial.println(c.status.code);
printParameters(configuration);
ResponseStructContainer cMi;
cMi = e220ttl.getModuleInformation();
// It's important get information pointer before all other operation
ModuleInformation mi = *(ModuleInformation*)cMi.data;
Serial.println(cMi.status.getResponseDescription());
Serial.println(cMi.status.code);
printModuleInformation(mi);
}
void loop() {
}
void printParameters(struct Configuration configuration) {
Serial.println("----------------------------------------");
Serial.print(F("HEAD : ")); Serial.print(configuration.COMMAND, HEX);Serial.print(" ");Serial.print(configuration.STARTING_ADDRESS, HEX);Serial.print(" ");Serial.println(configuration.LENGHT, HEX);
Serial.println(F(" "));
Serial.print(F("AddH : ")); Serial.println(configuration.ADDH, HEX);
Serial.print(F("AddL : ")); Serial.println(configuration.ADDL, HEX);
Serial.println(F(" "));
Serial.print(F("Chan : ")); Serial.print(configuration.CHAN, DEC); Serial.print(" -> "); Serial.println(configuration.getChannelDescription());
Serial.println(F(" "));
Serial.print(F("SpeedParityBit : ")); Serial.print(configuration.SPED.uartParity, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getUARTParityDescription());
Serial.print(F("SpeedUARTDatte : ")); Serial.print(configuration.SPED.uartBaudRate, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getUARTBaudRateDescription());
Serial.print(F("SpeedAirDataRate : ")); Serial.print(configuration.SPED.airDataRate, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getAirDataRateDescription());
Serial.println(F(" "));
Serial.print(F("OptionSubPacketSett: ")); Serial.print(configuration.OPTION.subPacketSetting, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getSubPacketSetting());
Serial.print(F("OptionTranPower : ")); Serial.print(configuration.OPTION.transmissionPower, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getTransmissionPowerDescription());
Serial.print(F("OptionRSSIAmbientNo: ")); Serial.print(configuration.OPTION.RSSIAmbientNoise, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getRSSIAmbientNoiseEnable());
Serial.println(F(" "));
Serial.print(F("TransModeWORPeriod : ")); Serial.print(configuration.TRANSMISSION_MODE.WORPeriod, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getWORPeriodByParamsDescription());
Serial.print(F("TransModeEnableLBT : ")); Serial.print(configuration.TRANSMISSION_MODE.enableLBT, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getLBTEnableByteDescription());
Serial.print(F("TransModeEnableRSSI: ")); Serial.print(configuration.TRANSMISSION_MODE.enableRSSI, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getRSSIEnableByteDescription());
Serial.print(F("TransModeFixedTrans: ")); Serial.print(configuration.TRANSMISSION_MODE.fixedTransmission, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getFixedTransmissionDescription());
Serial.println("----------------------------------------");
}
void printModuleInformation(struct ModuleInformation moduleInformation) {
Serial.println("----------------------------------------");
Serial.print(F("HEAD: ")); Serial.print(moduleInformation.COMMAND, HEX);Serial.print(" ");Serial.print(moduleInformation.STARTING_ADDRESS, HEX);Serial.print(" ");Serial.println(moduleInformation.LENGHT, DEC);
Serial.print(F("Model no.: ")); Serial.println(moduleInformation.model, HEX);
Serial.print(F("Version : ")); Serial.println(moduleInformation.version, HEX);
Serial.print(F("Features : ")); Serial.println(moduleInformation.features, HEX);
Serial.println("----------------------------------------");
}

417
Software/lib/EByte LoRa E220 library/examples/01_setConfiguration/01_setConfiguration.ino
View File

@@ -1,417 +0,0 @@
/*
* LoRa E220
* Set configuration.
*
* You must uncommend the correct constructor.
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- Raspberry Pi Pico ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or 3.3v) ----- 19 (or 3.3v) ----- 4 (or 3.3v) ----- 2 (or 3.3v) ----- 10 (or 3.3v) ----- PB0 (or 3.3v) ----- 7 Volt div (or 3.3v)
* M1 ----- D6 (or 3.3v) ----- 21 (or 3.3v) ----- 6 (or 3.3v) ----- 4 (or 3.3v) ----- 11 (or 3.3v) ----- PB10 (or 3.3v) ----- 6 Volt div (or 3.3v)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- 8 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- 9 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- 2 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------- Raspberry PI Pico pins --------------
// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); // RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
void printParameters(struct Configuration configuration);
void printModuleInformation(struct ModuleInformation moduleInformation);
void setup() {
Serial.begin(9600);
while(!Serial){};
delay(500);
Serial.println();
// Startup all pins and UART
e220ttl.begin();
ResponseStructContainer c;
c = e220ttl.getConfiguration();
// It's important get configuration pointer before all other operation
Configuration configuration = *(Configuration*) c.data;
Serial.println(c.status.getResponseDescription());
Serial.println(c.status.code);
printParameters(configuration);
// ----------------------- DEFAULT TRANSPARENT -----------------------
configuration.ADDL = 0x03; // First part of address
configuration.ADDH = 0x00; // Second part
configuration.CHAN = 23; // Communication channel
configuration.SPED.uartBaudRate = UART_BPS_9600; // Serial baud rate
configuration.SPED.airDataRate = AIR_DATA_RATE_010_24; // Air baud rate
configuration.SPED.uartParity = MODE_00_8N1; // Parity bit
configuration.OPTION.subPacketSetting = SPS_200_00; // Packet size
configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED; // Need to send special command
configuration.OPTION.transmissionPower = POWER_22; // Device power
configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED; // Enable RSSI info
configuration.TRANSMISSION_MODE.fixedTransmission = FT_TRANSPARENT_TRANSMISSION; // Enable repeater mode
configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED; // Check interference
configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011; // WOR timing
// ----------------------- DEFAULT TRANSPARENT WITH RSSI -----------------------
// configuration.ADDL = 0x03;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_TRANSPARENT_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- FIXED SENDER -----------------------
// configuration.ADDL = 0x02;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
//
// ----------------------- FIXED RECEIVER -----------------------
// configuration.ADDL = 0x03;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- FIXED SENDER RSSI -----------------------
// configuration.ADDL = 0x02;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
//
// ----------------------- FIXED RECEIVER RSSI -----------------------
// configuration.ADDL = 0x03;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
//
// ----------------------- WOR SENDER -----------------------
// configuration.ADDL = 0x02;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
//
// ----------------------- WOR RECEIVER -----------------------
// configuration.ADDL = 0x03;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE 1 -----------------------
// configuration.ADDL = 0x04;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE 2 -----------------------
// configuration.ADDL = 0x05;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE 3 -----------------------
// configuration.ADDL = 0x06;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE RSSI 1 -----------------------
// configuration.ADDL = 0x04;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE RSSI 2 -----------------------
// configuration.ADDL = 0x05;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE RSSI 3 -----------------------
// configuration.ADDL = 0x06;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- MONITORING -----------------------
// configuration.ADDL = BROADCAST_ADDRESS;
// configuration.ADDH = BROADCAST_ADDRESS;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// Set configuration changed and set to not hold the configuration
ResponseStatus rs = e220ttl.setConfiguration(configuration, WRITE_CFG_PWR_DWN_SAVE);
Serial.println(rs.getResponseDescription());
Serial.println(rs.code);
c = e220ttl.getConfiguration();
// It's important get configuration pointer before all other operation
configuration = *(Configuration*) c.data;
Serial.println(c.status.getResponseDescription());
Serial.println(c.status.code);
printParameters(configuration);
c.close();
}
void loop() {
}
void printParameters(struct Configuration configuration) {
DEBUG_PRINTLN("----------------------------------------");
DEBUG_PRINT(F("HEAD : ")); DEBUG_PRINT(configuration.COMMAND, HEX);DEBUG_PRINT(" ");DEBUG_PRINT(configuration.STARTING_ADDRESS, HEX);DEBUG_PRINT(" ");DEBUG_PRINTLN(configuration.LENGHT, HEX);
DEBUG_PRINTLN(F(" "));
DEBUG_PRINT(F("AddH : ")); DEBUG_PRINTLN(configuration.ADDH, HEX);
DEBUG_PRINT(F("AddL : ")); DEBUG_PRINTLN(configuration.ADDL, HEX);
DEBUG_PRINTLN(F(" "));
DEBUG_PRINT(F("Chan : ")); DEBUG_PRINT(configuration.CHAN, DEC); DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.getChannelDescription());
DEBUG_PRINTLN(F(" "));
DEBUG_PRINT(F("SpeedParityBit : ")); DEBUG_PRINT(configuration.SPED.uartParity, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.SPED.getUARTParityDescription());
DEBUG_PRINT(F("SpeedUARTDatte : ")); DEBUG_PRINT(configuration.SPED.uartBaudRate, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.SPED.getUARTBaudRateDescription());
DEBUG_PRINT(F("SpeedAirDataRate : ")); DEBUG_PRINT(configuration.SPED.airDataRate, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.SPED.getAirDataRateDescription());
DEBUG_PRINTLN(F(" "));
DEBUG_PRINT(F("OptionSubPacketSett: ")); DEBUG_PRINT(configuration.OPTION.subPacketSetting, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.OPTION.getSubPacketSetting());
DEBUG_PRINT(F("OptionTranPower : ")); DEBUG_PRINT(configuration.OPTION.transmissionPower, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.OPTION.getTransmissionPowerDescription());
DEBUG_PRINT(F("OptionRSSIAmbientNo: ")); DEBUG_PRINT(configuration.OPTION.RSSIAmbientNoise, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.OPTION.getRSSIAmbientNoiseEnable());
DEBUG_PRINTLN(F(" "));
DEBUG_PRINT(F("TransModeWORPeriod : ")); DEBUG_PRINT(configuration.TRANSMISSION_MODE.WORPeriod, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getWORPeriodByParamsDescription());
DEBUG_PRINT(F("TransModeEnableLBT : ")); DEBUG_PRINT(configuration.TRANSMISSION_MODE.enableLBT, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getLBTEnableByteDescription());
DEBUG_PRINT(F("TransModeEnableRSSI: ")); DEBUG_PRINT(configuration.TRANSMISSION_MODE.enableRSSI, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getRSSIEnableByteDescription());
DEBUG_PRINT(F("TransModeFixedTrans: ")); DEBUG_PRINT(configuration.TRANSMISSION_MODE.fixedTransmission, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getFixedTransmissionDescription());
DEBUG_PRINTLN("----------------------------------------");
}
void printModuleInformation(struct ModuleInformation moduleInformation) {
Serial.println("----------------------------------------");
DEBUG_PRINT(F("HEAD: ")); DEBUG_PRINT(moduleInformation.COMMAND, HEX);DEBUG_PRINT(" ");DEBUG_PRINT(moduleInformation.STARTING_ADDRESS, HEX);DEBUG_PRINT(" ");DEBUG_PRINTLN(moduleInformation.LENGHT, DEC);
Serial.print(F("Model no.: ")); Serial.println(moduleInformation.model, HEX);
Serial.print(F("Version : ")); Serial.println(moduleInformation.version, HEX);
Serial.print(F("Features : ")); Serial.println(moduleInformation.features, HEX);
Serial.println("----------------------------------------");
}

115
Software/lib/EByte LoRa E220 library/examples/02_sendTransparentTransmission/02_sendTransparentTransmission.ino
View File

@@ -1,115 +0,0 @@
/*
* EBYTE LoRa E220
* send a transparent message, you must check that the transmitter and receiver have the same
* CHANNEL ADDL and ADDH
*
* Pay attention e220 support RSSI, if you want use that functionality you must enable RSSI on configuration
* configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
*
* and uncomment #define ENABLE_RSSI true in this sketch
*
* You must uncommend the correct constructor.
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- Raspberry Pi Pico ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or GND) ----- 19 (or GND) ----- 4 (or GND) ----- 2 (or GND) ----- 10 (or GND) ----- PB0 (or GND) ----- 7 Volt div (or GND)
* M1 ----- D6 (or GND) ----- 21 (or GND) ----- 6 (or GND) ----- 4 (or GND) ----- 11 (or GND) ----- PB10 (or GND) ----- 6 Volt div (or GND)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- 8 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- 9 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- 2 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
#define ENABLE_RSSI true
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------- Raspberry PI Pico pins --------------
// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); // RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
void setup() {
Serial.begin(9600);
delay(500);
// Startup all pins and UART
e220ttl.begin();
// If you have ever change configuration you must restore It
Serial.println("Hi, I'm going to send message!");
// Send message
ResponseStatus rs = e220ttl.sendMessage("Hello, world?");
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
}
void loop() {
// If something available
if (e220ttl.available()>1) {
// read the String message
#ifdef ENABLE_RSSI
ResponseContainer rc = e220ttl.receiveMessageRSSI();
#else
ResponseContainer rc = e220ttl.receiveMessage();
#endif
// Is something goes wrong print error
if (rc.status.code!=1){
Serial.println(rc.status.getResponseDescription());
}else{
// Print the data received
Serial.println(rc.status.getResponseDescription());
Serial.println(rc.data);
#ifdef ENABLE_RSSI
Serial.print("RSSI: "); Serial.println(rc.rssi, DEC);
#endif
}
}
if (Serial.available()) {
String input = Serial.readString();
e220ttl.sendMessage(input);
}
}

168
Software/lib/EByte LoRa E220 library/examples/04_sendFixedTransmission/04_sendFixedTransmission.ino
View File

@@ -1,168 +0,0 @@
/*
* EBYTE LoRa E220
* Send a string message to a fixed point ADDH ADDL CHAN
*
* You must configure 2 device: one as SENDER (with FIXED SENDER config) and uncomment the relative
* define with the correct DESTINATION_ADDL, and one as RECEIVER (with FIXED RECEIVER config)
* and uncomment the relative define with the correct DESTINATION_ADDL.
*
* Write a string on serial monitor or reset to resend default value.
*
* Pai attention e220 support RSSI, if you want use that functionality you must enable RSSI on configuration
* configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
*
* and uncomment #define ENABLE_RSSI true in this sketch
*
* You must uncommend the correct constructor.
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- Raspberry Pi Pico ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or GND) ----- 19 (or GND) ----- 4 (or GND) ----- 2 (or GND) ----- 10 (or GND) ----- PB0 (or GND) ----- 7 Volt div (or GND)
* M1 ----- D6 (or GND) ----- 21 (or GND) ----- 6 (or GND) ----- 4 (or GND) ----- 11 (or GND) ----- PB10 (or GND) ----- 6 Volt div (or GND)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- 8 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- 9 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- 2 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
// With FIXED SENDER configuration
// #define DESTINATION_ADDL 3
// With FIXED RECEIVER configuration
#define DESTINATION_ADDL 2
// If you want use RSSI uncomment //#define ENABLE_RSSI true
// and use relative configuration with RSSI enabled
//#define ENABLE_RSSI true
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------- Raspberry PI Pico pins --------------
// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); // RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
void printParameters(struct Configuration configuration);
void setup() {
Serial.begin(9600);
delay(500);
// Startup all pins and UART
e220ttl.begin();
ResponseStructContainer c;
c = e220ttl.getConfiguration();
// It's important get configuration pointer before all other operation
Configuration configuration = *(Configuration*) c.data;
Serial.println(c.status.getResponseDescription());
Serial.println(c.status.code);
printParameters(configuration);
c.close();
Serial.println("Hi, I'm going to send message!");
// Send message
ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "Hello, world?");
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
}
void loop() {
// If something available
if (e220ttl.available()>1) {
// read the String message
#ifdef ENABLE_RSSI
ResponseContainer rc = e220ttl.receiveMessageRSSI();
#else
ResponseContainer rc = e220ttl.receiveMessage();
#endif
// Is something goes wrong print error
if (rc.status.code!=1){
Serial.println(rc.status.getResponseDescription());
}else{
// Print the data received
Serial.println(rc.status.getResponseDescription());
Serial.println(rc.data);
#ifdef ENABLE_RSSI
Serial.print("RSSI: "); Serial.println(rc.rssi, DEC);
#endif
}
}
if (Serial.available()) {
String input = Serial.readString();
ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, input);
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
}
}
void printParameters(struct Configuration configuration) {
Serial.println("----------------------------------------");
Serial.print(F("HEAD : ")); Serial.print(configuration.COMMAND, HEX);Serial.print(" ");Serial.print(configuration.STARTING_ADDRESS, HEX);Serial.print(" ");Serial.println(configuration.LENGHT, HEX);
Serial.println(F(" "));
Serial.print(F("AddH : ")); Serial.println(configuration.ADDH, HEX);
Serial.print(F("AddL : ")); Serial.println(configuration.ADDL, HEX);
Serial.println(F(" "));
Serial.print(F("Chan : ")); Serial.print(configuration.CHAN, DEC); Serial.print(" -> "); Serial.println(configuration.getChannelDescription());
Serial.println(F(" "));
Serial.print(F("SpeedParityBit : ")); Serial.print(configuration.SPED.uartParity, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getUARTParityDescription());
Serial.print(F("SpeedUARTDatte : ")); Serial.print(configuration.SPED.uartBaudRate, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getUARTBaudRateDescription());
Serial.print(F("SpeedAirDataRate : ")); Serial.print(configuration.SPED.airDataRate, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getAirDataRateDescription());
Serial.println(F(" "));
Serial.print(F("OptionSubPacketSett: ")); Serial.print(configuration.OPTION.subPacketSetting, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getSubPacketSetting());
Serial.print(F("OptionTranPower : ")); Serial.print(configuration.OPTION.transmissionPower, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getTransmissionPowerDescription());
Serial.print(F("OptionRSSIAmbientNo: ")); Serial.print(configuration.OPTION.RSSIAmbientNoise, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getRSSIAmbientNoiseEnable());
Serial.println(F(" "));
Serial.print(F("TransModeWORPeriod : ")); Serial.print(configuration.TRANSMISSION_MODE.WORPeriod, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getWORPeriodByParamsDescription());
Serial.print(F("TransModeEnableLBT : ")); Serial.print(configuration.TRANSMISSION_MODE.enableLBT, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getLBTEnableByteDescription());
Serial.print(F("TransModeEnableRSSI: ")); Serial.print(configuration.TRANSMISSION_MODE.enableRSSI, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getRSSIEnableByteDescription());
Serial.print(F("TransModeFixedTrans: ")); Serial.print(configuration.TRANSMISSION_MODE.fixedTransmission, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getFixedTransmissionDescription());
Serial.println("----------------------------------------");
}

149
Software/lib/EByte LoRa E220 library/examples/05_sendFixedTransmissionStructure/05_sendFixedTransmissionStructure.ino
View File

@@ -1,149 +0,0 @@
/*
* EBYTE LoRa E220
* send a structured message to the device that have ADDH ADDL CHAN -> 0 DESTINATION_ADDL 23
*
* write the int humidity value on serial (or reset device that send default message)
*
* You must configure 2 device: one as SENDER (with FIXED SENDER config) and uncomment the relative
* define with the correct DESTINATION_ADDL, and one as RECEIVER (with FIXED RECEIVER config)
* and uncomment the relative define with the correct DESTINATION_ADDL.
*
* Write a string on serial monitor or reset to resend default value.
*
* Pay attention e220 support RSSI, if you want use that functionality you must enable RSSI on configuration
* configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
*
* and uncomment #define ENABLE_RSSI true in this sketch
*
* You must uncommend the correct constructor and set the correct AUX_PIN define.
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- Raspberry Pi Pico ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or GND) ----- 19 (or GND) ----- 4 (or GND) ----- 2 (or GND) ----- 10 (or GND) ----- PB0 (or GND) ----- 7 Volt div (or GND)
* M1 ----- D6 (or GND) ----- 21 (or GND) ----- 6 (or GND) ----- 4 (or GND) ----- 11 (or GND) ----- PB10 (or GND) ----- 6 Volt div (or GND)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- 8 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- 9 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- 2 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
// With FIXED SENDER configuration
#define DESTINATION_ADDL 3
#define ROOM "Kitchen"
// With FIXED RECEIVER configuration
//#define DESTINATION_ADDL 2
//#define ROOM "Bath"
// If you want use RSSI uncomment //#define ENABLE_RSSI true
// and use relative configuration with RSSI enabled
// #define ENABLE_RSSI true
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
//LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------- Raspberry PI Pico pins --------------
// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); // RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
struct Message {
char type[5];
char message[8];
float temperature;
};
void setup() {
Serial.begin(9600);
delay(500);
// Startup all pins and UART
e220ttl.begin();
Serial.println("Hi, I'm going to send message!");
struct Message message = {"TEMP", ROOM, 19.2};
// Send message
ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &message, sizeof(Message));
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
}
void loop() {
// If something available
if (e220ttl.available()>1) {
// read the String message
#ifdef ENABLE_RSSI
ResponseStructContainer rsc = e220ttl.receiveMessageRSSI(sizeof(Message));
#else
ResponseStructContainer rsc = e220ttl.receiveMessage(sizeof(Message));
#endif
// Is something goes wrong print error
if (rsc.status.code!=1){
Serial.println(rsc.status.getResponseDescription());
}else{
// Print the data received
Serial.println(rsc.status.getResponseDescription());
struct Message message = *(Message*) rsc.data;
Serial.println(message.type);
Serial.println(message.message);
Serial.println(message.temperature);
#ifdef ENABLE_RSSI
Serial.print("RSSI: "); Serial.println(rsc.rssi, DEC);
#endif
}
}
if (Serial.available()) {
struct Message message = { "TEMP", ROOM, 0 };
message.temperature = Serial.parseFloat();
// Send message
ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &message, sizeof(Message));
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
}
}

188
Software/lib/EByte LoRa E220 library/examples/05_sendFixedTransmissionStructureReadPartial/05_sendFixedTransmissionStructureReadPartial.ino
View File

@@ -1,188 +0,0 @@
/*
* EBYTE LoRa E220
* send a structured message to the device that have ADDH ADDL CHAN -> 0 DESTINATION_ADDL 23
*
* The receiver read the first part of the packet and undestand the type.
* If the type is HUMI read the message and the humidity as int
* else read the temperature as float.
* I use byte array because some microcontroller can have different size for float
*
* You must configure 2 device: one as SENDER (with FIXED SENDER config) and uncomment the relative
* define with the correct DESTINATION_ADDL, and one as RECEIVER (with FIXED RECEIVER config)
* and uncomment the relative define with the correct DESTINATION_ADDL.
*
* Write a string on serial monitor or reset to resend default value.
*
* You must uncommend the correct constructor and set the correct AUX_PIN define.
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- Raspberry Pi Pico ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or GND) ----- 19 (or GND) ----- 4 (or GND) ----- 2 (or GND) ----- 10 (or GND) ----- PB0 (or GND) ----- 7 Volt div (or GND)
* M1 ----- D6 (or GND) ----- 21 (or GND) ----- 6 (or GND) ----- 4 (or GND) ----- 11 (or GND) ----- PB10 (or GND) ----- 6 Volt div (or GND)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- 8 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- 9 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- 2 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
#define MESSAGE_TYPE "HUMI"
// With FIXED SENDER configuration
//#define DESTINATION_ADDL 3
//#define ROOM "Kitchen"
// With FIXED RECEIVER configuration
#define DESTINATION_ADDL 2
#define ROOM "Bathroo"
// If you want use RSSI uncomment //#define ENABLE_RSSI true
// and use relative configuration with RSSI enabled
// #define ENABLE_RSSI true
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
//LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------- Raspberry PI Pico pins --------------
// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); // RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
struct MessageTemperature {
char type[5];
char message[8];
byte temperature[4];
};
struct MessageHumidity {
char type[5];
char message[8];
byte humidity;
};
void setup() {
Serial.begin(9600);
delay(500);
// Startup all pins and UART
e220ttl.begin();
Serial.println("Hi, I'm going to send message!");
struct MessageHumidity message = { "HUMI", ROOM, 80 };
// Send message
ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &message, sizeof(MessageHumidity));
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
struct MessageTemperature messageT = { "TEMP", ROOM, 0 };
*(float*)(messageT.temperature) = 19.2;
// Send message
ResponseStatus rsT = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &messageT, sizeof(MessageTemperature));
// Check If there is some problem of succesfully send
Serial.println(rsT.getResponseDescription());
}
void loop() {
// If something available
if (e220ttl.available() > 1) {
// read the String message
char type[5]; // first part of structure
ResponseContainer rs = e220ttl.receiveInitialMessage(sizeof(type));
String typeStr = rs.data;
// Is something goes wrong print error
if (rs.status.code != 1) {
Serial.println(rs.status.getResponseDescription());
} else {
Serial.println(typeStr);
if (typeStr == "TEMP") {
struct MessageTemperaturePartial {
char message[8];
byte temperature[4];
};
ResponseStructContainer rsc = e220ttl.receiveMessage( sizeof(MessageTemperaturePartial));
struct MessageTemperaturePartial message = *(MessageTemperaturePartial*) rsc.data;
Serial.println(*(float*)(message.temperature));
Serial.println(message.message);
rsc.close();
} else if (typeStr == "HUMI") {
struct MessageHumidityPartial {
char message[8];
byte humidity;
};
ResponseStructContainer rsc = e220ttl.receiveMessage(sizeof(MessageHumidityPartial));
struct MessageHumidityPartial message = *(MessageHumidityPartial*) rsc.data;
Serial.println(message.humidity);
Serial.println(message.message);
rsc.close();
} else {
Serial.println("Something goes wrong!!");
}
}
}
if (Serial.available()) {
if (MESSAGE_TYPE == "HUMI") {
struct MessageHumidity message = { "HUMI", ROOM, 0 };
message.humidity = Serial.parseInt();
// Send message
ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &message, sizeof(MessageHumidity));
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
} else {
struct MessageTemperature message = { "TEMP", ROOM, 0 };
*(float*)(message.temperature) = Serial.parseFloat();
// Send message
ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &message, sizeof(MessageTemperature));
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
}
}
}

111
Software/lib/EByte LoRa E220 library/examples/06_sendWORMessage/06_sendWORMessage.ino
View File

@@ -1,111 +0,0 @@
/*
* EBYTE LoRa E220
* Send wake up WOR message to a device in Sleep (WOR transmitter)
*
* You must configure the address with 0 3 23 (FIXED SENDER configuration)
* and pay attention that WOR period must be the same of receiver
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- Raspberry Pi Pico ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or 3.3v) ----- 19 (or 3.3v) ----- 4 (or 3.3v) ----- 2 (or 3.3v) ----- 10 (or 3.3v) ----- PB0 (or 3.3v) ----- 7 Volt div (or 3.3v)
* M1 ----- D6 (or GND) ----- 21 (or GND) ----- 6 (or GND) ----- 4 (or GND) ----- 11 (or GND) ----- PB10 (or GND) ----- 6 Volt div (or GND)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- 8 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- 9 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- 2 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
// With FIXED SENDER configuration
#define DESTINATION_ADDL 3
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------- Raspberry PI Pico pins --------------
// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); // RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
void setup() {
Serial.begin(9600);
delay(500);
// Startup all pins and UART
e220ttl.begin();
e220ttl.setMode(MODE_1_WOR_TRANSMITTER);
Serial.println("Hi, I'm going to send WOR message!");
// Send message
ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "Hello, world? WOR!");
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
// e220ttl.setMode(MODE_0_NORMAL);
}
void loop() {
// If something available
if (e220ttl.available()>1) {
// read the String message
ResponseContainer rc = e220ttl.receiveMessage();
// Is something goes wrong print error
if (rc.status.code!=1){
Serial.println(rc.status.getResponseDescription());
}else{
// Print the data received
Serial.println(rc.status.getResponseDescription());
Serial.println(rc.data);
}
}
if (Serial.available()) {
String input = Serial.readString();
ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, input);
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
}
}

137
Software/lib/EByte LoRa E220 library/examples/06_wakeUPLoRaFromWOR/06_wakeUPLoRaFromWOR.ino
View File

@@ -1,137 +0,0 @@
/*
* EBYTE LoRa E220
* Stay in sleep mode and wait a wake up WOR message
*
* You must configure the address with 0 2 23 (FIXED RECEIVER configuration)
* and pay attention that WOR period must be the same of sender
*
* You must uncommend the correct constructor and set the correct AUX_PIN define.
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or GND) ----- 19 (or GND) ----- 4 (or GND) ----- 2 (or GND) ----- PB0 (or GND) ----- 7 Volt div (or GND)
* M1 ----- D6 (or 3.3v) ----- 21 (or 3.3v) ----- 6 (or 3.3v) ----- 4 (or 3.3v) ----- PB10 (or 3.3v) ----- 6 Volt div (or 3.3v)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
// With FIXED RECEIVER configuration
#define DESTINATION_ADDL 2
#define AUX_PIN 15
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
bool interruptExecuted = false;
#ifdef ESP32
void IRAM_ATTR wakeUp() {
// Do not use Serial on interrupt callback
interruptExecuted = true;
detachInterrupt(AUX_PIN);
}
#elif define(ESP8266)
ICACHE_RAM_ATTR void wakeUp() {
// Do not use Serial on interrupt callback
interruptExecuted = true;
detachInterrupt(AUX_PIN);
}
#else
void wakeUp() {
// Do not use Serial on interrupt callback
interruptExecuted = true;
detachInterrupt(AUX_PIN);
}
#endif
//The setup function is called once at startup of the sketch
void setup() {
Serial.begin(9600);
while (!Serial) {
; // wait for serial port to connect. Needed for native USB
}
delay(100);
e220ttl.begin();
e220ttl.setMode(MODE_2_WOR_RECEIVER);
delay(1000);
Serial.println();
Serial.println("Start sleep!");
delay(100);
attachInterrupt(AUX_PIN, wakeUp, FALLING);
}
// The loop function is called in an endless loop
void loop() {
if (e220ttl.available() > 1) {
Serial.println("Message arrived!");
ResponseContainer rs = e220ttl.receiveMessage();
// First of all get the data
String message = rs.data;
Serial.println(rs.status.getResponseDescription());
Serial.println(message);
// Work only with full connection
e220ttl.setMode(MODE_0_NORMAL);
delay(1000);
ResponseStatus rsSend = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "We have received the message!");
// Check If there is some problem of succesfully send
Serial.println(rsSend.getResponseDescription());
}
if(interruptExecuted) {
Serial.println("WakeUp Callback, AUX pin go LOW and start receive message!");
Serial.flush();
interruptExecuted = false;
}
}

105
Software/lib/EByte LoRa E220 library/examples/07_receiveMessages/07_receiveMessages.ino
View File

@@ -1,105 +0,0 @@
/*
* EBYTE LoRa E220
*
* Receive messages on CHANNEL 23
* Uncomment #define ENABLE_RSSI true in this sketch
* if the sender send RSSI also
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- Raspberry Pi Pico ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or GND) ----- 19 (or GND) ----- 4 (or GND) ----- 2 (or GND) ----- 10 (or GND) ----- PB0 (or GND) ----- 7 Volt div (or GND)
* M1 ----- D6 (or GND) ----- 21 (or GND) ----- 6 (or GND) ----- 4 (or GND) ----- 11 (or GND) ----- PB10 (or GND) ----- 6 Volt div (or GND)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- 8 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- 9 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- 2 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
// If you want use RSSI uncomment
//#define ENABLE_RSSI true
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
//LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------- Raspberry PI Pico pins --------------
// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); // RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
void setup() {
Serial.begin(9600);
delay(500);
// Startup all pins and UART
e220ttl.begin();
Serial.println("Start receiving!");
}
void loop() {
// If something available
if (e220ttl.available()>1) {
Serial.println("Message received!");
// read the String message
#ifdef ENABLE_RSSI
ResponseContainer rc = e220ttl.receiveMessageRSSI();
#else
ResponseContainer rc = e220ttl.receiveMessage();
#endif
// Is something goes wrong print error
if (rc.status.code!=1){
Serial.println(rc.status.getResponseDescription());
}else{
// Print the data received
Serial.println(rc.status.getResponseDescription());
Serial.println(rc.data);
#ifdef ENABLE_RSSI
Serial.print("RSSI: "); Serial.println(rc.rssi, DEC);
#endif
}
}
}

128
Software/lib/EByte LoRa E220 library/examples/07_sendBroadcastMessage/07_sendBroadcastMessage.ino
View File

@@ -1,128 +0,0 @@
/*
* EBYTE LoRa E220
*
* Send a string message to all devices of the Channel CHAN 23
*
* Write a string on serial monitor or reset to send the string to all device on channel 23.
*
* Send a fixed message, you must check that the transmitter and receiver have different
* ADDL or ADDH, check the configuration down
*
* For the test you can use
* - BROADCAST MESSAGE 1
* - BROADCAST MESSAGE 2
* - BROADCAST MESSAGE 3
*
* Pai attention e220 support RSSI, if you want use that functionality you must enable RSSI on configuration
* configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
*
* and uncomment #define ENABLE_RSSI true in this sketch
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- Raspberry Pi Pico ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or GND) ----- 19 (or GND) ----- 4 (or GND) ----- 2 (or GND) ----- 10 (or GND) ----- PB0 (or GND) ----- 7 Volt div (or GND)
* M1 ----- D6 (or GND) ----- 21 (or GND) ----- 6 (or GND) ----- 4 (or GND) ----- 11 (or GND) ----- PB10 (or GND) ----- 6 Volt div (or GND)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- 8 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- 9 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- 2 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
// If you want use RSSI uncomment //#define ENABLE_RSSI true
// and use relative configuration with RSSI enabled
//#define ENABLE_RSSI true
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
//LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------- Raspberry PI Pico pins --------------
// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); // RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
void setup() {
Serial.begin(9600);
delay(500);
// Startup all pins and UART
e220ttl.begin();
Serial.println("Hi, I'm going to send message!");
// Send message
ResponseStatus rs = e220ttl.sendBroadcastFixedMessage(23, "Hello, world?");
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
}
void loop() {
// If something available
if (e220ttl.available()>1) {
// read the String message
#ifdef ENABLE_RSSI
ResponseContainer rc = e220ttl.receiveMessageRSSI();
#else
ResponseContainer rc = e220ttl.receiveMessage();
#endif
// Is something goes wrong print error
if (rc.status.code!=1){
Serial.println(rc.status.getResponseDescription());
}else{
// Print the data received
Serial.println(rc.status.getResponseDescription());
Serial.println(rc.data);
#ifdef ENABLE_RSSI
Serial.print("RSSI: "); Serial.println(rc.rssi, DEC);
#endif
}
}
if (Serial.available()) {
String input = Serial.readString();
ResponseStatus rs = e220ttl.sendBroadcastFixedMessage(23, input);
// Check If there is some problem of succesfully send
Serial.println(rs.getResponseDescription());
}
}

461
Software/lib/EByte LoRa E220 library/includes/statesNaming.h
View File

@@ -1,461 +0,0 @@
#include "Arduino.h"
#ifdef FREQUENCY_433
#define OPERATING_FREQUENCY 410
#elif defined(FREQUENCY_400)
#define OPERATING_FREQUENCY 410
#elif defined(FREQUENCY_230)
#define OPERATING_FREQUENCY 220
#elif defined(FREQUENCY_868)
#define OPERATING_FREQUENCY 850
#elif defined(FREQUENCY_915)
#define OPERATING_FREQUENCY 850
#else
#define OPERATING_FREQUENCY 410
#endif
#define BROADCAST_ADDRESS 255
typedef enum RESPONSE_STATUS {
#ifndef ARDUINO_ARCH_STM32
SUCCESS = 1,
#endif
E220_SUCCESS = 1,
ERR_E220_UNKNOWN, /* something shouldn't happened */
ERR_E220_NOT_SUPPORT,
ERR_E220_NOT_IMPLEMENT,
ERR_E220_NOT_INITIAL,
ERR_E220_INVALID_PARAM,
ERR_E220_DATA_SIZE_NOT_MATCH,
ERR_E220_BUF_TOO_SMALL,
ERR_E220_TIMEOUT,
ERR_E220_HARDWARE,
ERR_E220_HEAD_NOT_RECOGNIZED,
ERR_E220_NO_RESPONSE_FROM_DEVICE,
ERR_E220_WRONG_UART_CONFIG,
ERR_E220_WRONG_FORMAT,
ERR_E220_PACKET_TOO_BIG
} Status;
static String getResponseDescriptionByParams(byte status){
switch (status)
{
case E220_SUCCESS:
return F("Success");
break;
case ERR_E220_UNKNOWN:
return F("Unknown");
break;
case ERR_E220_NOT_SUPPORT:
return F("Not support!");
break;
case ERR_E220_NOT_IMPLEMENT:
return F("Not implement");
break;
case ERR_E220_NOT_INITIAL:
return F("Not initial!");
break;
case ERR_E220_INVALID_PARAM:
return F("Invalid param!");
break;
case ERR_E220_DATA_SIZE_NOT_MATCH:
return F("Data size not match!");
break;
case ERR_E220_BUF_TOO_SMALL:
return F("Buff too small!");
break;
case ERR_E220_TIMEOUT:
return F("Timeout!!");
break;
case ERR_E220_HARDWARE:
return F("Hardware error!");
break;
case ERR_E220_HEAD_NOT_RECOGNIZED:
return F("Save mode returned not recognized!");
break;
case ERR_E220_NO_RESPONSE_FROM_DEVICE:
return F("No response from device! (Check wiring)");
break;
case ERR_E220_WRONG_UART_CONFIG:
return F("Wrong UART configuration! (BPS must be 9600 for configuration)");
break;
case ERR_E220_PACKET_TOO_BIG:
return F("The device support only 200byte of data transmission!");
break;
default:
return F("Invalid status!");
}
}
enum UART_PARITY
{
MODE_00_8N1 = 0b00,
MODE_01_8O1 = 0b01,
MODE_10_8E1 = 0b10,
MODE_11_8N1 = 0b11
};
static String getUARTParityDescriptionByParams(byte uartParity){
switch (uartParity)
{
case MODE_00_8N1:
return F("8N1 (Default)");
break;
case MODE_01_8O1:
return F("8O1");
break;
case MODE_10_8E1:
return F("8E1");
break;
case MODE_11_8N1:
return F("8N1 (equal to 00");
break;
default:
return F("Invalid UART Parity!");
}
}
enum UART_BPS_TYPE
{
UART_BPS_1200 = 0b000,
UART_BPS_2400 = 0b001,
UART_BPS_4800 = 0b010,
UART_BPS_9600 = 0b011,
UART_BPS_19200 = 0b100,
UART_BPS_38400 = 0b101,
UART_BPS_57600 = 0b110,
UART_BPS_115200 = 0b111
};
enum UART_BPS_RATE
{
UART_BPS_RATE_1200 = 1200,
UART_BPS_RATE_2400 = 2400,
UART_BPS_RATE_4800 = 4800,
UART_BPS_RATE_9600 = 9600,
UART_BPS_RATE_19200 = 19200,
UART_BPS_RATE_38400 = 38400,
UART_BPS_RATE_57600 = 57600,
UART_BPS_RATE_115200 = 115200
};
static String getUARTBaudRateDescriptionByParams(byte uartBaudRate)
{
switch (uartBaudRate)
{
case UART_BPS_1200:
return F("1200bps");
break;
case UART_BPS_2400:
return F("2400bps");
break;
case UART_BPS_4800:
return F("4800bps");
break;
case UART_BPS_9600:
return F("9600bps (default)");
break;
case UART_BPS_19200:
return F("19200bps");
break;
case UART_BPS_38400:
return F("38400bps");
break;
case UART_BPS_57600:
return F("57600bps");
break;
case UART_BPS_115200:
return F("115200bps");
break;
default:
return F("Invalid UART Baud Rate!");
}
}
enum AIR_DATA_RATE
{
AIR_DATA_RATE_000_24 = 0b000,
AIR_DATA_RATE_001_24 = 0b001,
AIR_DATA_RATE_010_24 = 0b010,
AIR_DATA_RATE_011_48 = 0b011,
AIR_DATA_RATE_100_96 = 0b100,
AIR_DATA_RATE_101_192 = 0b101,
AIR_DATA_RATE_110_384 = 0b110,
AIR_DATA_RATE_111_625 = 0b111
};
static String getAirDataRateDescriptionByParams(byte airDataRate)
{
switch (airDataRate)
{
case AIR_DATA_RATE_000_24:
return F("2.4kbps");
break;
case AIR_DATA_RATE_001_24:
return F("2.4kbps");
break;
case AIR_DATA_RATE_010_24:
return F("2.4kbps (default)");
break;
case AIR_DATA_RATE_011_48:
return F("4.8kbps");
break;
case AIR_DATA_RATE_100_96:
return F("9.6kbps");
break;
case AIR_DATA_RATE_101_192:
return F("19.2kbps");
break;
case AIR_DATA_RATE_110_384:
return F("38.4kbps");
break;
case AIR_DATA_RATE_111_625:
return F("62.5kbps");
break;
default:
return F("Invalid Air Data Rate!");
}
}
enum SUB_PACKET_SETTING {
SPS_200_00 = 0b00,
SPS_128_01 = 0b01,
SPS_064_10 = 0b10,
SPS_032_11 = 0b11
};
static String getSubPacketSettingByParams(byte subPacketSetting)
{
switch (subPacketSetting)
{
case SPS_200_00:
return F("200bytes (default)");
break;
case SPS_128_01:
return F("128bytes");
break;
case SPS_064_10:
return F("64bytes");
break;
case SPS_032_11:
return F("32bytes");
break;
default:
return F("Invalid Sub Packet Setting!");
}
}
enum RSSI_AMBIENT_NOISE_ENABLE {
RSSI_AMBIENT_NOISE_ENABLED = 0b1,
RSSI_AMBIENT_NOISE_DISABLED = 0b0
};
static String getRSSIAmbientNoiseEnableByParams(byte rssiAmbientNoiseEnabled)
{
switch (rssiAmbientNoiseEnabled)
{
case RSSI_AMBIENT_NOISE_ENABLED:
return F("Enabled");
break;
case RSSI_AMBIENT_NOISE_DISABLED:
return F("Disabled (default)");
break;
default:
return F("Invalid RSSI Ambient Noise enabled!");
}
}
enum WOR_PERIOD {
WOR_500_000 = 0b000,
WOR_1000_001 = 0b001,
WOR_1500_010 = 0b010,
WOR_2000_011 = 0b011,
WOR_2500_100 = 0b100,
WOR_3000_101 = 0b101,
WOR_3500_110 = 0b110,
WOR_4000_111 = 0b111
};
static String getWORPeriodByParams(byte WORPeriod)
{
switch (WORPeriod)
{
case WOR_500_000:
return F("500ms");
break;
case WOR_1000_001:
return F("1000ms");
break;
case WOR_1500_010:
return F("1500ms");
break;
case WOR_2000_011:
return F("2000ms (default)");
break;
case WOR_2500_100:
return F("2500ms");
break;
case WOR_3000_101:
return F("3000ms");
break;
case WOR_3500_110:
return F("3500ms");
break;
case WOR_4000_111:
return F("4000ms");
break;
default:
return F("Invalid WOR period!");
}
}
enum LBT_ENABLE_BYTE {
LBT_ENABLED = 0b1,
LBT_DISABLED = 0b0
};
static String getLBTEnableByteByParams(byte LBTEnableByte)
{
switch (LBTEnableByte)
{
case LBT_ENABLED:
return F("Enabled");
break;
case LBT_DISABLED:
return F("Disabled (default)");
break;
default:
return F("Invalid LBT enable byte!");
}
}
enum RSSI_ENABLE_BYTE {
RSSI_ENABLED = 0b1,
RSSI_DISABLED = 0b0
};
static String getRSSIEnableByteByParams(byte RSSIEnableByte)
{
switch (RSSIEnableByte)
{
case RSSI_ENABLED:
return F("Enabled");
break;
case RSSI_DISABLED:
return F("Disabled (default)");
break;
default:
return F("Invalid RSSI enable byte!");
}
}
enum FIDEX_TRANSMISSION
{
FT_TRANSPARENT_TRANSMISSION = 0b0,
FT_FIXED_TRANSMISSION = 0b1
};
static String getFixedTransmissionDescriptionByParams(byte fixedTransmission)
{
switch (fixedTransmission)
{
case FT_TRANSPARENT_TRANSMISSION:
return F("Transparent transmission (default)");
break;
case FT_FIXED_TRANSMISSION:
return F("Fixed transmission (first three bytes can be used as high/low address and channel)");
break;
default:
return F("Invalid fixed transmission param!");
}
}
#ifdef E220_22
enum TRANSMISSION_POWER
{
POWER_22 = 0b00,
POWER_17 = 0b01,
POWER_13 = 0b10,
POWER_10 = 0b11
};
static String getTransmissionPowerDescriptionByParams(byte transmissionPower)
{
switch (transmissionPower)
{
case POWER_22:
return F("22dBm (Default)");
break;
case POWER_17:
return F("17dBm");
break;
case POWER_13:
return F("13dBm");
break;
case POWER_10:
return F("10dBm");
break;
default:
return F("Invalid transmission power param");
}
}
#elif defined(E220_30)
enum TRANSMISSION_POWER
{
POWER_30 = 0b00,
POWER_27 = 0b01,
POWER_24 = 0b10,
POWER_21 = 0b11
};
static String getTransmissionPowerDescriptionByParams(byte transmissionPower)
{
switch (transmissionPower)
{
case POWER_30:
return F("30dBm (Default)");
break;
case POWER_27:
return F("27dBm");
break;
case POWER_24:
return F("24dBm");
break;
case POWER_21:
return F("21dBm");
break;
default:
return F("Invalid transmission power param");
}
}
#else
enum TRANSMISSION_POWER
{
POWER_22 = 0b00,
POWER_17 = 0b01,
POWER_13 = 0b10,
POWER_10 = 0b11
};
static String getTransmissionPowerDescriptionByParams(byte transmissionPower)
{
switch (transmissionPower)
{
case POWER_22:
return F("22dBm (Default)");
break;
case POWER_17:
return F("17dBm");
break;
case POWER_13:
return F("13dBm");
break;
case POWER_10:
return F("10dBm");
break;
default:
return F("Invalid transmission power param");
}
}
#endif

30
Software/lib/EByte LoRa E220 library/keywords.txt
View File

@@ -1,30 +0,0 @@
###########################################
# Syntax Coloring Map For LoRa_E32_Series-library
###########################################
###########################################
# Datatypes (KEYWORD1)
###########################################
LoRa_E220 KEYWORD1
###########################################
# Methods and Functions (KEYWORD2)
###########################################
begin KEYWORD2
getConfiguration KEYWORD2
setConfiguration KEYWORD2
getModuleInformation KEYWORD2
printParameters KEYWORD2
resetModule KEYWORD2
sendMessage KEYWORD2
receiveMessage KEYWORD2
sendFixedMessage KEYWORD2
sendBroadcastFixedMessage KEYWORD2
receiveInitialMessage KEYWORD2

11
Software/lib/EByte LoRa E220 library/library.properties
View File

@@ -1,11 +0,0 @@
name=EByte LoRa E220 library
version=1.0.6
author=Renzo Mischianti <renzo.mischianti@gmail.com>
maintainer=Renzo Mischianti <renzo.mischianti@gmail.com>
sentence=LoRa EBYTE E220 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico. LLCC68
paragraph=Ebyte E220 LoRa (Long Range) library device very cheap and very long range (from 5Km to 10Km). Arduino LoRa EBYTE E220 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico. LLCC68
category=Communication
url=https://www.mischianti.org/category/my-libraries/ebyte-lora-e22-devices/
repository=https://github.com/xreef/EByte_LoRa_E220_Series_Library
architectures=*
includes=LoRa_E220.h

2
Software/lib/ESP Async WebServer/.gitignore vendored
View File

@@ -1,2 +0,0 @@
.vscode
.DS_Store

1
Software/lib/ESP Async WebServer/.piopm
View File

@@ -1 +0,0 @@
{"type": "library", "name": "ESP Async WebServer", "version": "1.2.3", "spec": {"owner": "me-no-dev", "id": 306, "name": "ESP Async WebServer", "requirements": null, "uri": null}}

46
Software/lib/ESP Async WebServer/.travis.yml
View File

@@ -1,46 +0,0 @@
sudo: false
language: python
os:
- linux
git:
depth: false
stages:
- build
jobs:
include:
- name: "Build Arduino ESP32"
if: tag IS blank AND (type = pull_request OR (type = push AND branch = master))
stage: build
script: bash $TRAVIS_BUILD_DIR/.github/scripts/on-push.sh esp32
- name: "Build Arduino ESP8266"
if: tag IS blank AND (type = pull_request OR (type = push AND branch = master))
stage: build
script: bash $TRAVIS_BUILD_DIR/.github/scripts/on-push.sh esp8266
- name: "Build Platformio ESP32"
if: tag IS blank AND (type = pull_request OR (type = push AND branch = master))
stage: build
script: bash $TRAVIS_BUILD_DIR/.github/scripts/on-push.sh esp32 1 1
- name: "Build Platformio ESP8266"
if: tag IS blank AND (type = pull_request OR (type = push AND branch = master))
stage: build
script: bash $TRAVIS_BUILD_DIR/.github/scripts/on-push.sh esp8266 1 1
notifications:
email:
on_success: change
on_failure: change
webhooks:
urls:
- https://webhooks.gitter.im/e/60e65d0c78ea0a920347
on_success: change # options: [always|never|change] default: always
on_failure: always # options: [always|never|change] default: always
on_start: never # options: [always|never|change] default: always

17
Software/lib/ESP Async WebServer/CMakeLists.txt
View File

@@ -1,17 +0,0 @@
set(COMPONENT_SRCDIRS
"src"
)
set(COMPONENT_ADD_INCLUDEDIRS
"src"
)
set(COMPONENT_REQUIRES
"arduino-esp32"
"AsyncTCP"
)
register_component()
target_compile_definitions(${COMPONENT_TARGET} PUBLIC -DESP32)
target_compile_options(${COMPONENT_TARGET} PRIVATE -fno-rtti)

1486
Software/lib/ESP Async WebServer/README.md
View File

File diff suppressed because it is too large Load Diff

1
Software/lib/ESP Async WebServer/_config.yml
View File

@@ -1 +0,0 @@
theme: jekyll-theme-cayman

3
Software/lib/ESP Async WebServer/component.mk
View File

@@ -1,3 +0,0 @@
COMPONENT_ADD_INCLUDEDIRS := src
COMPONENT_SRCDIRS := src
CXXFLAGS += -fno-rtti

3
Software/lib/ESP Async WebServer/keywords.txt
View File

@@ -1,3 +0,0 @@
JsonArray KEYWORD1
add KEYWORD2
createArray KEYWORD3

33
Software/lib/ESP Async WebServer/library.json
View File

@@ -1,33 +0,0 @@
{
"name":"ESP Async WebServer",
"description":"Asynchronous HTTP and WebSocket Server Library for ESP8266 and ESP32",
"keywords":"http,async,websocket,webserver",
"authors":
{
"name": "Hristo Gochkov",
"maintainer": true
},
"repository":
{
"type": "git",
"url": "https://github.com/me-no-dev/ESPAsyncWebServer.git"
},
"version": "1.2.3",
"license": "LGPL-3.0",
"frameworks": "arduino",
"platforms": ["espressif8266", "espressif32"],
"dependencies": [
{
"name": "ESPAsyncTCP",
"platforms": "espressif8266"
},
{
"name": "AsyncTCP",
"platforms": "espressif32"
},
{
"name": "Hash",
"platforms": "espressif8266"
}
]
}

9
Software/lib/ESP Async WebServer/library.properties
View File

@@ -1,9 +0,0 @@
name=ESP Async WebServer
version=1.2.3
author=Me-No-Dev
maintainer=Me-No-Dev
sentence=Async Web Server for ESP8266 and ESP31B
paragraph=Async Web Server for ESP8266 and ESP31B
category=Other
url=https://github.com/me-no-dev/ESPAsyncWebServer
architectures=*

363
Software/lib/ESP Async WebServer/src/AsyncEventSource.cpp
View File

@@ -1,363 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "Arduino.h"
#include "AsyncEventSource.h"
static String generateEventMessage(const char *message, const char *event, uint32_t id, uint32_t reconnect){
String ev = "";
if(reconnect){
ev += "retry: ";
ev += String(reconnect);
ev += "\r\n";
}
if(id){
ev += "id: ";
ev += String(id);
ev += "\r\n";
}
if(event != NULL){
ev += "event: ";
ev += String(event);
ev += "\r\n";
}
if(message != NULL){
size_t messageLen = strlen(message);
char * lineStart = (char *)message;
char * lineEnd;
do {
char * nextN = strchr(lineStart, '\n');
char * nextR = strchr(lineStart, '\r');
if(nextN == NULL && nextR == NULL){
size_t llen = ((char *)message + messageLen) - lineStart;
char * ldata = (char *)malloc(llen+1);
if(ldata != NULL){
memcpy(ldata, lineStart, llen);
ldata[llen] = 0;
ev += "data: ";
ev += ldata;
ev += "\r\n\r\n";
free(ldata);
}
lineStart = (char *)message + messageLen;
} else {
char * nextLine = NULL;
if(nextN != NULL && nextR != NULL){
if(nextR < nextN){
lineEnd = nextR;
if(nextN == (nextR + 1))
nextLine = nextN + 1;
else
nextLine = nextR + 1;
} else {
lineEnd = nextN;
if(nextR == (nextN + 1))
nextLine = nextR + 1;
else
nextLine = nextN + 1;
}
} else if(nextN != NULL){
lineEnd = nextN;
nextLine = nextN + 1;
} else {
lineEnd = nextR;
nextLine = nextR + 1;
}
size_t llen = lineEnd - lineStart;
char * ldata = (char *)malloc(llen+1);
if(ldata != NULL){
memcpy(ldata, lineStart, llen);
ldata[llen] = 0;
ev += "data: ";
ev += ldata;
ev += "\r\n";
free(ldata);
}
lineStart = nextLine;
if(lineStart == ((char *)message + messageLen))
ev += "\r\n";
}
} while(lineStart < ((char *)message + messageLen));
}
return ev;
}
// Message
AsyncEventSourceMessage::AsyncEventSourceMessage(const char * data, size_t len)
: _data(nullptr), _len(len), _sent(0), _acked(0)
{
_data = (uint8_t*)malloc(_len+1);
if(_data == nullptr){
_len = 0;
} else {
memcpy(_data, data, len);
_data[_len] = 0;
}
}
AsyncEventSourceMessage::~AsyncEventSourceMessage() {
if(_data != NULL)
free(_data);
}
size_t AsyncEventSourceMessage::ack(size_t len, uint32_t time) {
// If the whole message is now acked...
if(_acked + len > _len){
// Return the number of extra bytes acked (they will be carried on to the next message)
const size_t extra = _acked + len - _len;
_acked = _len;
return extra;
}
// Return that no extra bytes left.
_acked += len;
return 0;
}
size_t AsyncEventSourceMessage::send(AsyncClient *client) {
const size_t len = _len - _sent;
if(client->space() < len){
return 0;
}
size_t sent = client->add((const char *)_data, len);
if(client->canSend())
client->send();
_sent += sent;
return sent;
}
// Client
AsyncEventSourceClient::AsyncEventSourceClient(AsyncWebServerRequest *request, AsyncEventSource *server)
: _messageQueue(LinkedList<AsyncEventSourceMessage *>([](AsyncEventSourceMessage *m){ delete m; }))
{
_client = request->client();
_server = server;
_lastId = 0;
if(request->hasHeader("Last-Event-ID"))
_lastId = atoi(request->getHeader("Last-Event-ID")->value().c_str());
_client->setRxTimeout(0);
_client->onError(NULL, NULL);
_client->onAck([](void *r, AsyncClient* c, size_t len, uint32_t time){ ((AsyncEventSourceClient*)(r))->_onAck(len, time); }, this);
_client->onPoll([](void *r, AsyncClient* c){ ((AsyncEventSourceClient*)(r))->_onPoll(); }, this);
_client->onData(NULL, NULL);
_client->onTimeout([this](void *r, AsyncClient* c __attribute__((unused)), uint32_t time){ ((AsyncEventSourceClient*)(r))->_onTimeout(time); }, this);
_client->onDisconnect([this](void *r, AsyncClient* c){ ((AsyncEventSourceClient*)(r))->_onDisconnect(); delete c; }, this);
_server->_addClient(this);
delete request;
}
AsyncEventSourceClient::~AsyncEventSourceClient(){
_messageQueue.free();
close();
}
void AsyncEventSourceClient::_queueMessage(AsyncEventSourceMessage *dataMessage){
if(dataMessage == NULL)
return;
if(!connected()){
delete dataMessage;
return;
}
_messageQueue.add(dataMessage);
_runQueue();
}
void AsyncEventSourceClient::_onAck(size_t len, uint32_t time){
while(len && !_messageQueue.isEmpty()){
len = _messageQueue.front()->ack(len, time);
if(_messageQueue.front()->finished())
_messageQueue.remove(_messageQueue.front());
}
_runQueue();
}
void AsyncEventSourceClient::_onPoll(){
if(!_messageQueue.isEmpty()){
_runQueue();
}
}
void AsyncEventSourceClient::_onTimeout(uint32_t time __attribute__((unused))){
_client->close(true);
}
void AsyncEventSourceClient::_onDisconnect(){
_client = NULL;
_server->_handleDisconnect(this);
}
void AsyncEventSourceClient::close(){
if(_client != NULL)
_client->close();
}
void AsyncEventSourceClient::write(const char * message, size_t len){
_queueMessage(new AsyncEventSourceMessage(message, len));
}
void AsyncEventSourceClient::send(const char *message, const char *event, uint32_t id, uint32_t reconnect){
String ev = generateEventMessage(message, event, id, reconnect);
_queueMessage(new AsyncEventSourceMessage(ev.c_str(), ev.length()));
}
void AsyncEventSourceClient::_runQueue(){
while(!_messageQueue.isEmpty() && _messageQueue.front()->finished()){
_messageQueue.remove(_messageQueue.front());
}
for(auto i = _messageQueue.begin(); i != _messageQueue.end(); ++i)
{
if(!(*i)->sent())
(*i)->send(_client);
}
}
// Handler
AsyncEventSource::AsyncEventSource(const String& url)
: _url(url)
, _clients(LinkedList<AsyncEventSourceClient *>([](AsyncEventSourceClient *c){ delete c; }))
, _connectcb(NULL)
{}
AsyncEventSource::~AsyncEventSource(){
close();
}
void AsyncEventSource::onConnect(ArEventHandlerFunction cb){
_connectcb = cb;
}
void AsyncEventSource::_addClient(AsyncEventSourceClient * client){
/*char * temp = (char *)malloc(2054);
if(temp != NULL){
memset(temp+1,' ',2048);
temp[0] = ':';
temp[2049] = '\r';
temp[2050] = '\n';
temp[2051] = '\r';
temp[2052] = '\n';
temp[2053] = 0;
client->write((const char *)temp, 2053);
free(temp);
}*/
_clients.add(client);
if(_connectcb)
_connectcb(client);
}
void AsyncEventSource::_handleDisconnect(AsyncEventSourceClient * client){
_clients.remove(client);
}
void AsyncEventSource::close(){
for(const auto &c: _clients){
if(c->connected())
c->close();
}
}
// pmb fix
size_t AsyncEventSource::avgPacketsWaiting() const {
if(_clients.isEmpty())
return 0;
size_t aql=0;
uint32_t nConnectedClients=0;
for(const auto &c: _clients){
if(c->connected()) {
aql+=c->packetsWaiting();
++nConnectedClients;
}
}
// return aql / nConnectedClients;
return ((aql) + (nConnectedClients/2))/(nConnectedClients); // round up
}
void AsyncEventSource::send(const char *message, const char *event, uint32_t id, uint32_t reconnect){
String ev = generateEventMessage(message, event, id, reconnect);
for(const auto &c: _clients){
if(c->connected()) {
c->write(ev.c_str(), ev.length());
}
}
}
size_t AsyncEventSource::count() const {
return _clients.count_if([](AsyncEventSourceClient *c){
return c->connected();
});
}
bool AsyncEventSource::canHandle(AsyncWebServerRequest *request){
if(request->method() != HTTP_GET || !request->url().equals(_url)) {
return false;
}
request->addInterestingHeader("Last-Event-ID");
return true;
}
void AsyncEventSource::handleRequest(AsyncWebServerRequest *request){
if((_username != "" && _password != "") && !request->authenticate(_username.c_str(), _password.c_str()))
return request->requestAuthentication();
request->send(new AsyncEventSourceResponse(this));
}
// Response
AsyncEventSourceResponse::AsyncEventSourceResponse(AsyncEventSource *server){
_server = server;
_code = 200;
_contentType = "text/event-stream";
_sendContentLength = false;
addHeader("Cache-Control", "no-cache");
addHeader("Connection","keep-alive");
}
void AsyncEventSourceResponse::_respond(AsyncWebServerRequest *request){
String out = _assembleHead(request->version());
request->client()->write(out.c_str(), _headLength);
_state = RESPONSE_WAIT_ACK;
}
size_t AsyncEventSourceResponse::_ack(AsyncWebServerRequest *request, size_t len, uint32_t time __attribute__((unused))){
if(len){
new AsyncEventSourceClient(request, _server);
}
return 0;
}

116
Software/lib/ESP Async WebServer/src/AsyncEventSource.h
View File

@@ -1,116 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef ASYNCEVENTSOURCE_H_
#define ASYNCEVENTSOURCE_H_
#include <Arduino.h>
#ifdef ESP32
#include <AsyncTCP.h>
#else
#include <ESPAsyncTCP.h>
#endif
#include <ESPAsyncWebServer.h>
class AsyncEventSource;
class AsyncEventSourceResponse;
class AsyncEventSourceClient;
typedef std::function<void(AsyncEventSourceClient *client)> ArEventHandlerFunction;
class AsyncEventSourceMessage {
private:
uint8_t * _data;
size_t _len;
size_t _sent;
//size_t _ack;
size_t _acked;
public:
AsyncEventSourceMessage(const char * data, size_t len);
~AsyncEventSourceMessage();
size_t ack(size_t len, uint32_t time __attribute__((unused)));
size_t send(AsyncClient *client);
bool finished(){ return _acked == _len; }
bool sent() { return _sent == _len; }
};
class AsyncEventSourceClient {
private:
AsyncClient *_client;
AsyncEventSource *_server;
uint32_t _lastId;
LinkedList<AsyncEventSourceMessage *> _messageQueue;
void _queueMessage(AsyncEventSourceMessage *dataMessage);
void _runQueue();
public:
AsyncEventSourceClient(AsyncWebServerRequest *request, AsyncEventSource *server);
~AsyncEventSourceClient();
AsyncClient* client(){ return _client; }
void close();
void write(const char * message, size_t len);
void send(const char *message, const char *event=NULL, uint32_t id=0, uint32_t reconnect=0);
bool connected() const { return (_client != NULL) && _client->connected(); }
uint32_t lastId() const { return _lastId; }
size_t packetsWaiting() const { return _messageQueue.length(); }
//system callbacks (do not call)
void _onAck(size_t len, uint32_t time);
void _onPoll();
void _onTimeout(uint32_t time);
void _onDisconnect();
};
class AsyncEventSource: public AsyncWebHandler {
private:
String _url;
LinkedList<AsyncEventSourceClient *> _clients;
ArEventHandlerFunction _connectcb;
public:
AsyncEventSource(const String& url);
~AsyncEventSource();
const char * url() const { return _url.c_str(); }
void close();
void onConnect(ArEventHandlerFunction cb);
void send(const char *message, const char *event=NULL, uint32_t id=0, uint32_t reconnect=0);
size_t count() const; //number clinets connected
size_t avgPacketsWaiting() const;
//system callbacks (do not call)
void _addClient(AsyncEventSourceClient * client);
void _handleDisconnect(AsyncEventSourceClient * client);
virtual bool canHandle(AsyncWebServerRequest *request) override final;
virtual void handleRequest(AsyncWebServerRequest *request) override final;
};
class AsyncEventSourceResponse: public AsyncWebServerResponse {
private:
String _content;
AsyncEventSource *_server;
public:
AsyncEventSourceResponse(AsyncEventSource *server);
void _respond(AsyncWebServerRequest *request);
size_t _ack(AsyncWebServerRequest *request, size_t len, uint32_t time);
bool _sourceValid() const { return true; }
};
#endif /* ASYNCEVENTSOURCE_H_ */

252
Software/lib/ESP Async WebServer/src/AsyncJson.h
View File

@@ -1,252 +0,0 @@
// AsyncJson.h
/*
Async Response to use with ArduinoJson and AsyncWebServer
Written by Andrew Melvin (SticilFace) with help from me-no-dev and BBlanchon.
Example of callback in use
server.on("/json", HTTP_ANY, [](AsyncWebServerRequest * request) {
AsyncJsonResponse * response = new AsyncJsonResponse();
JsonObject& root = response->getRoot();
root["key1"] = "key number one";
JsonObject& nested = root.createNestedObject("nested");
nested["key1"] = "key number one";
response->setLength();
request->send(response);
});
--------------------
Async Request to use with ArduinoJson and AsyncWebServer
Written by Arsène von Wyss (avonwyss)
Example
AsyncCallbackJsonWebHandler* handler = new AsyncCallbackJsonWebHandler("/rest/endpoint");
handler->onRequest([](AsyncWebServerRequest *request, JsonVariant &json) {
JsonObject& jsonObj = json.as<JsonObject>();
// ...
});
server.addHandler(handler);
*/
#ifndef ASYNC_JSON_H_
#define ASYNC_JSON_H_
#include <ArduinoJson.h>
#include <ESPAsyncWebServer.h>
#include <Print.h>
#if ARDUINOJSON_VERSION_MAJOR == 5
#define ARDUINOJSON_5_COMPATIBILITY
#else
#define DYNAMIC_JSON_DOCUMENT_SIZE 1024
#endif
constexpr const char* JSON_MIMETYPE = "application/json";
/*
* Json Response
* */
class ChunkPrint : public Print {
private:
uint8_t* _destination;
size_t _to_skip;
size_t _to_write;
size_t _pos;
public:
ChunkPrint(uint8_t* destination, size_t from, size_t len)
: _destination(destination), _to_skip(from), _to_write(len), _pos{0} {}
virtual ~ChunkPrint(){}
size_t write(uint8_t c){
if (_to_skip > 0) {
_to_skip--;
return 1;
} else if (_to_write > 0) {
_to_write--;
_destination[_pos++] = c;
return 1;
}
return 0;
}
size_t write(const uint8_t *buffer, size_t size)
{
return this->Print::write(buffer, size);
}
};
class AsyncJsonResponse: public AsyncAbstractResponse {
protected:
#ifdef ARDUINOJSON_5_COMPATIBILITY
DynamicJsonBuffer _jsonBuffer;
#else
DynamicJsonDocument _jsonBuffer;
#endif
JsonVariant _root;
bool _isValid;
public:
#ifdef ARDUINOJSON_5_COMPATIBILITY
AsyncJsonResponse(bool isArray=false): _isValid{false} {
_code = 200;
_contentType = JSON_MIMETYPE;
if(isArray)
_root = _jsonBuffer.createArray();
else
_root = _jsonBuffer.createObject();
}
#else
AsyncJsonResponse(bool isArray=false, size_t maxJsonBufferSize = DYNAMIC_JSON_DOCUMENT_SIZE) : _jsonBuffer(maxJsonBufferSize), _isValid{false} {
_code = 200;
_contentType = JSON_MIMETYPE;
if(isArray)
_root = _jsonBuffer.createNestedArray();
else
_root = _jsonBuffer.createNestedObject();
}
#endif
~AsyncJsonResponse() {}
JsonVariant & getRoot() { return _root; }
bool _sourceValid() const { return _isValid; }
size_t setLength() {
#ifdef ARDUINOJSON_5_COMPATIBILITY
_contentLength = _root.measureLength();
#else
_contentLength = measureJson(_root);
#endif
if (_contentLength) { _isValid = true; }
return _contentLength;
}
size_t getSize() { return _jsonBuffer.size(); }
size_t _fillBuffer(uint8_t *data, size_t len){
ChunkPrint dest(data, _sentLength, len);
#ifdef ARDUINOJSON_5_COMPATIBILITY
_root.printTo( dest ) ;
#else
serializeJson(_root, dest);
#endif
return len;
}
};
class PrettyAsyncJsonResponse: public AsyncJsonResponse {
public:
#ifdef ARDUINOJSON_5_COMPATIBILITY
PrettyAsyncJsonResponse (bool isArray=false) : AsyncJsonResponse{isArray} {}
#else
PrettyAsyncJsonResponse (bool isArray=false, size_t maxJsonBufferSize = DYNAMIC_JSON_DOCUMENT_SIZE) : AsyncJsonResponse{isArray, maxJsonBufferSize} {}
#endif
size_t setLength () {
#ifdef ARDUINOJSON_5_COMPATIBILITY
_contentLength = _root.measurePrettyLength ();
#else
_contentLength = measureJsonPretty(_root);
#endif
if (_contentLength) {_isValid = true;}
return _contentLength;
}
size_t _fillBuffer (uint8_t *data, size_t len) {
ChunkPrint dest (data, _sentLength, len);
#ifdef ARDUINOJSON_5_COMPATIBILITY
_root.prettyPrintTo (dest);
#else
serializeJsonPretty(_root, dest);
#endif
return len;
}
};
typedef std::function<void(AsyncWebServerRequest *request, JsonVariant &json)> ArJsonRequestHandlerFunction;
class AsyncCallbackJsonWebHandler: public AsyncWebHandler {
private:
protected:
const String _uri;
WebRequestMethodComposite _method;
ArJsonRequestHandlerFunction _onRequest;
size_t _contentLength;
#ifndef ARDUINOJSON_5_COMPATIBILITY
const size_t maxJsonBufferSize;
#endif
size_t _maxContentLength;
public:
#ifdef ARDUINOJSON_5_COMPATIBILITY
AsyncCallbackJsonWebHandler(const String& uri, ArJsonRequestHandlerFunction onRequest)
: _uri(uri), _method(HTTP_POST|HTTP_PUT|HTTP_PATCH), _onRequest(onRequest), _maxContentLength(16384) {}
#else
AsyncCallbackJsonWebHandler(const String& uri, ArJsonRequestHandlerFunction onRequest, size_t maxJsonBufferSize=DYNAMIC_JSON_DOCUMENT_SIZE)
: _uri(uri), _method(HTTP_POST|HTTP_PUT|HTTP_PATCH), _onRequest(onRequest), maxJsonBufferSize(maxJsonBufferSize), _maxContentLength(16384) {}
#endif
void setMethod(WebRequestMethodComposite method){ _method = method; }
void setMaxContentLength(int maxContentLength){ _maxContentLength = maxContentLength; }
void onRequest(ArJsonRequestHandlerFunction fn){ _onRequest = fn; }
virtual bool canHandle(AsyncWebServerRequest *request) override final{
if(!_onRequest)
return false;
if(!(_method & request->method()))
return false;
if(_uri.length() && (_uri != request->url() && !request->url().startsWith(_uri+"/")))
return false;
if ( !request->contentType().equalsIgnoreCase(JSON_MIMETYPE) )
return false;
request->addInterestingHeader("ANY");
return true;
}
virtual void handleRequest(AsyncWebServerRequest *request) override final {
if(_onRequest) {
if (request->_tempObject != NULL) {
#ifdef ARDUINOJSON_5_COMPATIBILITY
DynamicJsonBuffer jsonBuffer;
JsonVariant json = jsonBuffer.parse((uint8_t*)(request->_tempObject));
if (json.success()) {
#else
DynamicJsonDocument jsonBuffer(this->maxJsonBufferSize);
DeserializationError error = deserializeJson(jsonBuffer, (uint8_t*)(request->_tempObject));
if(!error) {
JsonVariant json = jsonBuffer.as<JsonVariant>();
#endif
_onRequest(request, json);
return;
}
}
request->send(_contentLength > _maxContentLength ? 413 : 400);
} else {
request->send(500);
}
}
virtual void handleUpload(AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) override final {
}
virtual void handleBody(AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total) override final {
if (_onRequest) {
_contentLength = total;
if (total > 0 && request->_tempObject == NULL && total < _maxContentLength) {
request->_tempObject = malloc(total);
}
if (request->_tempObject != NULL) {
memcpy((uint8_t*)(request->_tempObject) + index, data, len);
}
}
}
virtual bool isRequestHandlerTrivial() override final {return _onRequest ? false : true;}
};
#endif

1299
Software/lib/ESP Async WebServer/src/AsyncWebSocket.cpp
View File

File diff suppressed because it is too large Load Diff

350
Software/lib/ESP Async WebServer/src/AsyncWebSocket.h
View File

@@ -1,350 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This file is part of the esp8266 core for Arduino environment.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef ASYNCWEBSOCKET_H_
#define ASYNCWEBSOCKET_H_
#include <Arduino.h>
#ifdef ESP32
#include <AsyncTCP.h>
#define WS_MAX_QUEUED_MESSAGES 32
#else
#include <ESPAsyncTCP.h>
#define WS_MAX_QUEUED_MESSAGES 8
#endif
#include <ESPAsyncWebServer.h>
#include "AsyncWebSynchronization.h"
#ifdef ESP8266
#include <Hash.h>
#ifdef CRYPTO_HASH_h // include Hash.h from espressif framework if the first include was from the crypto library
#include <../src/Hash.h>
#endif
#endif
#ifdef ESP32
#define DEFAULT_MAX_WS_CLIENTS 8
#else
#define DEFAULT_MAX_WS_CLIENTS 4
#endif
class AsyncWebSocket;
class AsyncWebSocketResponse;
class AsyncWebSocketClient;
class AsyncWebSocketControl;
typedef struct {
/** Message type as defined by enum AwsFrameType.
* Note: Applications will only see WS_TEXT and WS_BINARY.
* All other types are handled by the library. */
uint8_t message_opcode;
/** Frame number of a fragmented message. */
uint32_t num;
/** Is this the last frame in a fragmented message ?*/
uint8_t final;
/** Is this frame masked? */
uint8_t masked;
/** Message type as defined by enum AwsFrameType.
* This value is the same as message_opcode for non-fragmented
* messages, but may also be WS_CONTINUATION in a fragmented message. */
uint8_t opcode;
/** Length of the current frame.
* This equals the total length of the message if num == 0 && final == true */
uint64_t len;
/** Mask key */
uint8_t mask[4];
/** Offset of the data inside the current frame. */
uint64_t index;
} AwsFrameInfo;
typedef enum { WS_DISCONNECTED, WS_CONNECTED, WS_DISCONNECTING } AwsClientStatus;
typedef enum { WS_CONTINUATION, WS_TEXT, WS_BINARY, WS_DISCONNECT = 0x08, WS_PING, WS_PONG } AwsFrameType;
typedef enum { WS_MSG_SENDING, WS_MSG_SENT, WS_MSG_ERROR } AwsMessageStatus;
typedef enum { WS_EVT_CONNECT, WS_EVT_DISCONNECT, WS_EVT_PONG, WS_EVT_ERROR, WS_EVT_DATA } AwsEventType;
class AsyncWebSocketMessageBuffer {
private:
uint8_t * _data;
size_t _len;
bool _lock;
uint32_t _count;
public:
AsyncWebSocketMessageBuffer();
AsyncWebSocketMessageBuffer(size_t size);
AsyncWebSocketMessageBuffer(uint8_t * data, size_t size);
AsyncWebSocketMessageBuffer(const AsyncWebSocketMessageBuffer &);
AsyncWebSocketMessageBuffer(AsyncWebSocketMessageBuffer &&);
~AsyncWebSocketMessageBuffer();
void operator ++(int i) { _count++; }
void operator --(int i) { if (_count > 0) { _count--; } ; }
bool reserve(size_t size);
void lock() { _lock = true; }
void unlock() { _lock = false; }
uint8_t * get() { return _data; }
size_t length() { return _len; }
uint32_t count() { return _count; }
bool canDelete() { return (!_count && !_lock); }
friend AsyncWebSocket;
};
class AsyncWebSocketMessage {
protected:
uint8_t _opcode;
bool _mask;
AwsMessageStatus _status;
public:
AsyncWebSocketMessage():_opcode(WS_TEXT),_mask(false),_status(WS_MSG_ERROR){}
virtual ~AsyncWebSocketMessage(){}
virtual void ack(size_t len __attribute__((unused)), uint32_t time __attribute__((unused))){}
virtual size_t send(AsyncClient *client __attribute__((unused))){ return 0; }
virtual bool finished(){ return _status != WS_MSG_SENDING; }
virtual bool betweenFrames() const { return false; }
};
class AsyncWebSocketBasicMessage: public AsyncWebSocketMessage {
private:
size_t _len;
size_t _sent;
size_t _ack;
size_t _acked;
uint8_t * _data;
public:
AsyncWebSocketBasicMessage(const char * data, size_t len, uint8_t opcode=WS_TEXT, bool mask=false);
AsyncWebSocketBasicMessage(uint8_t opcode=WS_TEXT, bool mask=false);
virtual ~AsyncWebSocketBasicMessage() override;
virtual bool betweenFrames() const override { return _acked == _ack; }
virtual void ack(size_t len, uint32_t time) override ;
virtual size_t send(AsyncClient *client) override ;
};
class AsyncWebSocketMultiMessage: public AsyncWebSocketMessage {
private:
uint8_t * _data;
size_t _len;
size_t _sent;
size_t _ack;
size_t _acked;
AsyncWebSocketMessageBuffer * _WSbuffer;
public:
AsyncWebSocketMultiMessage(AsyncWebSocketMessageBuffer * buffer, uint8_t opcode=WS_TEXT, bool mask=false);
virtual ~AsyncWebSocketMultiMessage() override;
virtual bool betweenFrames() const override { return _acked == _ack; }
virtual void ack(size_t len, uint32_t time) override ;
virtual size_t send(AsyncClient *client) override ;
};
class AsyncWebSocketClient {
private:
AsyncClient *_client;
AsyncWebSocket *_server;
uint32_t _clientId;
AwsClientStatus _status;
LinkedList<AsyncWebSocketControl *> _controlQueue;
LinkedList<AsyncWebSocketMessage *> _messageQueue;
uint8_t _pstate;
AwsFrameInfo _pinfo;
uint32_t _lastMessageTime;
uint32_t _keepAlivePeriod;
void _queueMessage(AsyncWebSocketMessage *dataMessage);
void _queueControl(AsyncWebSocketControl *controlMessage);
void _runQueue();
public:
void *_tempObject;
AsyncWebSocketClient(AsyncWebServerRequest *request, AsyncWebSocket *server);
~AsyncWebSocketClient();
//client id increments for the given server
uint32_t id(){ return _clientId; }
AwsClientStatus status(){ return _status; }
AsyncClient* client(){ return _client; }
AsyncWebSocket *server(){ return _server; }
AwsFrameInfo const &pinfo() const { return _pinfo; }
IPAddress remoteIP();
uint16_t remotePort();
//control frames
void close(uint16_t code=0, const char * message=NULL);
void ping(uint8_t *data=NULL, size_t len=0);
//set auto-ping period in seconds. disabled if zero (default)
void keepAlivePeriod(uint16_t seconds){
_keepAlivePeriod = seconds * 1000;
}
uint16_t keepAlivePeriod(){
return (uint16_t)(_keepAlivePeriod / 1000);
}
//data packets
void message(AsyncWebSocketMessage *message){ _queueMessage(message); }
bool queueIsFull();
size_t printf(const char *format, ...) __attribute__ ((format (printf, 2, 3)));
#ifndef ESP32
size_t printf_P(PGM_P formatP, ...) __attribute__ ((format (printf, 2, 3)));
#endif
void text(const char * message, size_t len);
void text(const char * message);
void text(uint8_t * message, size_t len);
void text(char * message);
void text(const String &message);
void text(const __FlashStringHelper *data);
void text(AsyncWebSocketMessageBuffer *buffer);
void binary(const char * message, size_t len);
void binary(const char * message);
void binary(uint8_t * message, size_t len);
void binary(char * message);
void binary(const String &message);
void binary(const __FlashStringHelper *data, size_t len);
void binary(AsyncWebSocketMessageBuffer *buffer);
bool canSend() { return _messageQueue.length() < WS_MAX_QUEUED_MESSAGES; }
//system callbacks (do not call)
void _onAck(size_t len, uint32_t time);
void _onError(int8_t);
void _onPoll();
void _onTimeout(uint32_t time);
void _onDisconnect();
void _onData(void *pbuf, size_t plen);
};
typedef std::function<void(AsyncWebSocket * server, AsyncWebSocketClient * client, AwsEventType type, void * arg, uint8_t *data, size_t len)> AwsEventHandler;
//WebServer Handler implementation that plays the role of a socket server
class AsyncWebSocket: public AsyncWebHandler {
public:
typedef LinkedList<AsyncWebSocketClient *> AsyncWebSocketClientLinkedList;
private:
String _url;
AsyncWebSocketClientLinkedList _clients;
uint32_t _cNextId;
AwsEventHandler _eventHandler;
bool _enabled;
AsyncWebLock _lock;
public:
AsyncWebSocket(const String& url);
~AsyncWebSocket();
const char * url() const { return _url.c_str(); }
void enable(bool e){ _enabled = e; }
bool enabled() const { return _enabled; }
bool availableForWriteAll();
bool availableForWrite(uint32_t id);
size_t count() const;
AsyncWebSocketClient * client(uint32_t id);
bool hasClient(uint32_t id){ return client(id) != NULL; }
void close(uint32_t id, uint16_t code=0, const char * message=NULL);
void closeAll(uint16_t code=0, const char * message=NULL);
void cleanupClients(uint16_t maxClients = DEFAULT_MAX_WS_CLIENTS);
void ping(uint32_t id, uint8_t *data=NULL, size_t len=0);
void pingAll(uint8_t *data=NULL, size_t len=0); // done
void text(uint32_t id, const char * message, size_t len);
void text(uint32_t id, const char * message);
void text(uint32_t id, uint8_t * message, size_t len);
void text(uint32_t id, char * message);
void text(uint32_t id, const String &message);
void text(uint32_t id, const __FlashStringHelper *message);
void textAll(const char * message, size_t len);
void textAll(const char * message);
void textAll(uint8_t * message, size_t len);
void textAll(char * message);
void textAll(const String &message);
void textAll(const __FlashStringHelper *message); // need to convert
void textAll(AsyncWebSocketMessageBuffer * buffer);
void binary(uint32_t id, const char * message, size_t len);
void binary(uint32_t id, const char * message);
void binary(uint32_t id, uint8_t * message, size_t len);
void binary(uint32_t id, char * message);
void binary(uint32_t id, const String &message);
void binary(uint32_t id, const __FlashStringHelper *message, size_t len);
void binaryAll(const char * message, size_t len);
void binaryAll(const char * message);
void binaryAll(uint8_t * message, size_t len);
void binaryAll(char * message);
void binaryAll(const String &message);
void binaryAll(const __FlashStringHelper *message, size_t len);
void binaryAll(AsyncWebSocketMessageBuffer * buffer);
void message(uint32_t id, AsyncWebSocketMessage *message);
void messageAll(AsyncWebSocketMultiMessage *message);
size_t printf(uint32_t id, const char *format, ...) __attribute__ ((format (printf, 3, 4)));
size_t printfAll(const char *format, ...) __attribute__ ((format (printf, 2, 3)));
#ifndef ESP32
size_t printf_P(uint32_t id, PGM_P formatP, ...) __attribute__ ((format (printf, 3, 4)));
#endif
size_t printfAll_P(PGM_P formatP, ...) __attribute__ ((format (printf, 2, 3)));
//event listener
void onEvent(AwsEventHandler handler){
_eventHandler = handler;
}
//system callbacks (do not call)
uint32_t _getNextId(){ return _cNextId++; }
void _addClient(AsyncWebSocketClient * client);
void _handleDisconnect(AsyncWebSocketClient * client);
void _handleEvent(AsyncWebSocketClient * client, AwsEventType type, void * arg, uint8_t *data, size_t len);
virtual bool canHandle(AsyncWebServerRequest *request) override final;
virtual void handleRequest(AsyncWebServerRequest *request) override final;
// messagebuffer functions/objects.
AsyncWebSocketMessageBuffer * makeBuffer(size_t size = 0);
AsyncWebSocketMessageBuffer * makeBuffer(uint8_t * data, size_t size);
LinkedList<AsyncWebSocketMessageBuffer *> _buffers;
void _cleanBuffers();
AsyncWebSocketClientLinkedList getClients() const;
};
//WebServer response to authenticate the socket and detach the tcp client from the web server request
class AsyncWebSocketResponse: public AsyncWebServerResponse {
private:
String _content;
AsyncWebSocket *_server;
public:
AsyncWebSocketResponse(const String& key, AsyncWebSocket *server);
void _respond(AsyncWebServerRequest *request);
size_t _ack(AsyncWebServerRequest *request, size_t len, uint32_t time);
bool _sourceValid() const { return true; }
};
#endif /* ASYNCWEBSOCKET_H_ */

87
Software/lib/ESP Async WebServer/src/AsyncWebSynchronization.h
View File

@@ -1,87 +0,0 @@
#ifndef ASYNCWEBSYNCHRONIZATION_H_
#define ASYNCWEBSYNCHRONIZATION_H_
// Synchronisation is only available on ESP32, as the ESP8266 isn't using FreeRTOS by default
#include <ESPAsyncWebServer.h>
#ifdef ESP32
// This is the ESP32 version of the Sync Lock, using the FreeRTOS Semaphore
class AsyncWebLock
{
private:
SemaphoreHandle_t _lock;
mutable void *_lockedBy;
public:
AsyncWebLock() {
_lock = xSemaphoreCreateBinary();
_lockedBy = NULL;
xSemaphoreGive(_lock);
}
~AsyncWebLock() {
vSemaphoreDelete(_lock);
}
bool lock() const {
extern void *pxCurrentTCB;
if (_lockedBy != pxCurrentTCB) {
xSemaphoreTake(_lock, portMAX_DELAY);
_lockedBy = pxCurrentTCB;
return true;
}
return false;
}
void unlock() const {
_lockedBy = NULL;
xSemaphoreGive(_lock);
}
};
#else
// This is the 8266 version of the Sync Lock which is currently unimplemented
class AsyncWebLock
{
public:
AsyncWebLock() {
}
~AsyncWebLock() {
}
bool lock() const {
return false;
}
void unlock() const {
}
};
#endif
class AsyncWebLockGuard
{
private:
const AsyncWebLock *_lock;
public:
AsyncWebLockGuard(const AsyncWebLock &l) {
if (l.lock()) {
_lock = &l;
} else {
_lock = NULL;
}
}
~AsyncWebLockGuard() {
if (_lock) {
_lock->unlock();
}
}
};
#endif // ASYNCWEBSYNCHRONIZATION_H_

465
Software/lib/ESP Async WebServer/src/ESPAsyncWebServer.h
View File

@@ -1,465 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This file is part of the esp8266 core for Arduino environment.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _ESPAsyncWebServer_H_
#define _ESPAsyncWebServer_H_
#include "Arduino.h"
#include <functional>
#include "FS.h"
#include "StringArray.h"
#ifdef ESP32
#include <WiFi.h>
#include <AsyncTCP.h>
#elif defined(ESP8266)
#include <ESP8266WiFi.h>
#include <ESPAsyncTCP.h>
#else
#error Platform not supported
#endif
#define DEBUGF(...) //Serial.printf(__VA_ARGS__)
class AsyncWebServer;
class AsyncWebServerRequest;
class AsyncWebServerResponse;
class AsyncWebHeader;
class AsyncWebParameter;
class AsyncWebRewrite;
class AsyncWebHandler;
class AsyncStaticWebHandler;
class AsyncCallbackWebHandler;
class AsyncResponseStream;
#ifndef WEBSERVER_H
typedef enum {
HTTP_GET = 0b00000001,
HTTP_POST = 0b00000010,
HTTP_DELETE = 0b00000100,
HTTP_PUT = 0b00001000,
HTTP_PATCH = 0b00010000,
HTTP_HEAD = 0b00100000,
HTTP_OPTIONS = 0b01000000,
HTTP_ANY = 0b01111111,
} WebRequestMethod;
#endif
//if this value is returned when asked for data, packet will not be sent and you will be asked for data again
#define RESPONSE_TRY_AGAIN 0xFFFFFFFF
typedef uint8_t WebRequestMethodComposite;
typedef std::function<void(void)> ArDisconnectHandler;
/*
* PARAMETER :: Chainable object to hold GET/POST and FILE parameters
* */
class AsyncWebParameter {
private:
String _name;
String _value;
size_t _size;
bool _isForm;
bool _isFile;
public:
AsyncWebParameter(const String& name, const String& value, bool form=false, bool file=false, size_t size=0): _name(name), _value(value), _size(size), _isForm(form), _isFile(file){}
const String& name() const { return _name; }
const String& value() const { return _value; }
size_t size() const { return _size; }
bool isPost() const { return _isForm; }
bool isFile() const { return _isFile; }
};
/*
* HEADER :: Chainable object to hold the headers
* */
class AsyncWebHeader {
private:
String _name;
String _value;
public:
AsyncWebHeader(const String& name, const String& value): _name(name), _value(value){}
AsyncWebHeader(const String& data): _name(), _value(){
if(!data) return;
int index = data.indexOf(':');
if (index < 0) return;
_name = data.substring(0, index);
_value = data.substring(index + 2);
}
~AsyncWebHeader(){}
const String& name() const { return _name; }
const String& value() const { return _value; }
String toString() const { return String(_name+": "+_value+"\r\n"); }
};
/*
* REQUEST :: Each incoming Client is wrapped inside a Request and both live together until disconnect
* */
typedef enum { RCT_NOT_USED = -1, RCT_DEFAULT = 0, RCT_HTTP, RCT_WS, RCT_EVENT, RCT_MAX } RequestedConnectionType;
typedef std::function<size_t(uint8_t*, size_t, size_t)> AwsResponseFiller;
typedef std::function<String(const String&)> AwsTemplateProcessor;
class AsyncWebServerRequest {
using File = fs::File;
using FS = fs::FS;
friend class AsyncWebServer;
friend class AsyncCallbackWebHandler;
private:
AsyncClient* _client;
AsyncWebServer* _server;
AsyncWebHandler* _handler;
AsyncWebServerResponse* _response;
StringArray _interestingHeaders;
ArDisconnectHandler _onDisconnectfn;
String _temp;
uint8_t _parseState;
uint8_t _version;
WebRequestMethodComposite _method;
String _url;
String _host;
String _contentType;
String _boundary;
String _authorization;
RequestedConnectionType _reqconntype;
void _removeNotInterestingHeaders();
bool _isDigest;
bool _isMultipart;
bool _isPlainPost;
bool _expectingContinue;
size_t _contentLength;
size_t _parsedLength;
LinkedList<AsyncWebHeader *> _headers;
LinkedList<AsyncWebParameter *> _params;
LinkedList<String *> _pathParams;
uint8_t _multiParseState;
uint8_t _boundaryPosition;
size_t _itemStartIndex;
size_t _itemSize;
String _itemName;
String _itemFilename;
String _itemType;
String _itemValue;
uint8_t *_itemBuffer;
size_t _itemBufferIndex;
bool _itemIsFile;
void _onPoll();
void _onAck(size_t len, uint32_t time);
void _onError(int8_t error);
void _onTimeout(uint32_t time);
void _onDisconnect();
void _onData(void *buf, size_t len);
void _addParam(AsyncWebParameter*);
void _addPathParam(const char *param);
bool _parseReqHead();
bool _parseReqHeader();
void _parseLine();
void _parsePlainPostChar(uint8_t data);
void _parseMultipartPostByte(uint8_t data, bool last);
void _addGetParams(const String& params);
void _handleUploadStart();
void _handleUploadByte(uint8_t data, bool last);
void _handleUploadEnd();
public:
File _tempFile;
void *_tempObject;
AsyncWebServerRequest(AsyncWebServer*, AsyncClient*);
~AsyncWebServerRequest();
AsyncClient* client(){ return _client; }
uint8_t version() const { return _version; }
WebRequestMethodComposite method() const { return _method; }
const String& url() const { return _url; }
const String& host() const { return _host; }
const String& contentType() const { return _contentType; }
size_t contentLength() const { return _contentLength; }
bool multipart() const { return _isMultipart; }
const char * methodToString() const;
const char * requestedConnTypeToString() const;
RequestedConnectionType requestedConnType() const { return _reqconntype; }
bool isExpectedRequestedConnType(RequestedConnectionType erct1, RequestedConnectionType erct2 = RCT_NOT_USED, RequestedConnectionType erct3 = RCT_NOT_USED);
void onDisconnect (ArDisconnectHandler fn);
//hash is the string representation of:
// base64(user:pass) for basic or
// user:realm:md5(user:realm:pass) for digest
bool authenticate(const char * hash);
bool authenticate(const char * username, const char * password, const char * realm = NULL, bool passwordIsHash = false);
void requestAuthentication(const char * realm = NULL, bool isDigest = true);
void setHandler(AsyncWebHandler *handler){ _handler = handler; }
void addInterestingHeader(const String& name);
void redirect(const String& url);
void send(AsyncWebServerResponse *response);
void send(int code, const String& contentType=String(), const String& content=String());
void send(FS &fs, const String& path, const String& contentType=String(), bool download=false, AwsTemplateProcessor callback=nullptr);
void send(File content, const String& path, const String& contentType=String(), bool download=false, AwsTemplateProcessor callback=nullptr);
void send(Stream &stream, const String& contentType, size_t len, AwsTemplateProcessor callback=nullptr);
void send(const String& contentType, size_t len, AwsResponseFiller callback, AwsTemplateProcessor templateCallback=nullptr);
void sendChunked(const String& contentType, AwsResponseFiller callback, AwsTemplateProcessor templateCallback=nullptr);
void send_P(int code, const String& contentType, const uint8_t * content, size_t len, AwsTemplateProcessor callback=nullptr);
void send_P(int code, const String& contentType, PGM_P content, AwsTemplateProcessor callback=nullptr);
AsyncWebServerResponse *beginResponse(int code, const String& contentType=String(), const String& content=String());
AsyncWebServerResponse *beginResponse(FS &fs, const String& path, const String& contentType=String(), bool download=false, AwsTemplateProcessor callback=nullptr);
AsyncWebServerResponse *beginResponse(File content, const String& path, const String& contentType=String(), bool download=false, AwsTemplateProcessor callback=nullptr);
AsyncWebServerResponse *beginResponse(Stream &stream, const String& contentType, size_t len, AwsTemplateProcessor callback=nullptr);
AsyncWebServerResponse *beginResponse(const String& contentType, size_t len, AwsResponseFiller callback, AwsTemplateProcessor templateCallback=nullptr);
AsyncWebServerResponse *beginChunkedResponse(const String& contentType, AwsResponseFiller callback, AwsTemplateProcessor templateCallback=nullptr);
AsyncResponseStream *beginResponseStream(const String& contentType, size_t bufferSize=1460);
AsyncWebServerResponse *beginResponse_P(int code, const String& contentType, const uint8_t * content, size_t len, AwsTemplateProcessor callback=nullptr);
AsyncWebServerResponse *beginResponse_P(int code, const String& contentType, PGM_P content, AwsTemplateProcessor callback=nullptr);
size_t headers() const; // get header count
bool hasHeader(const String& name) const; // check if header exists
bool hasHeader(const __FlashStringHelper * data) const; // check if header exists
AsyncWebHeader* getHeader(const String& name) const;
AsyncWebHeader* getHeader(const __FlashStringHelper * data) const;
AsyncWebHeader* getHeader(size_t num) const;
size_t params() const; // get arguments count
bool hasParam(const String& name, bool post=false, bool file=false) const;
bool hasParam(const __FlashStringHelper * data, bool post=false, bool file=false) const;
AsyncWebParameter* getParam(const String& name, bool post=false, bool file=false) const;
AsyncWebParameter* getParam(const __FlashStringHelper * data, bool post, bool file) const;
AsyncWebParameter* getParam(size_t num) const;
size_t args() const { return params(); } // get arguments count
const String& arg(const String& name) const; // get request argument value by name
const String& arg(const __FlashStringHelper * data) const; // get request argument value by F(name)
const String& arg(size_t i) const; // get request argument value by number
const String& argName(size_t i) const; // get request argument name by number
bool hasArg(const char* name) const; // check if argument exists
bool hasArg(const __FlashStringHelper * data) const; // check if F(argument) exists
const String& pathArg(size_t i) const;
const String& header(const char* name) const;// get request header value by name
const String& header(const __FlashStringHelper * data) const;// get request header value by F(name)
const String& header(size_t i) const; // get request header value by number
const String& headerName(size_t i) const; // get request header name by number
String urlDecode(const String& text) const;
};
/*
* FILTER :: Callback to filter AsyncWebRewrite and AsyncWebHandler (done by the Server)
* */
typedef std::function<bool(AsyncWebServerRequest *request)> ArRequestFilterFunction;
bool ON_STA_FILTER(AsyncWebServerRequest *request);
bool ON_AP_FILTER(AsyncWebServerRequest *request);
/*
* REWRITE :: One instance can be handle any Request (done by the Server)
* */
class AsyncWebRewrite {
protected:
String _from;
String _toUrl;
String _params;
ArRequestFilterFunction _filter;
public:
AsyncWebRewrite(const char* from, const char* to): _from(from), _toUrl(to), _params(String()), _filter(NULL){
int index = _toUrl.indexOf('?');
if (index > 0) {
_params = _toUrl.substring(index +1);
_toUrl = _toUrl.substring(0, index);
}
}
virtual ~AsyncWebRewrite(){}
AsyncWebRewrite& setFilter(ArRequestFilterFunction fn) { _filter = fn; return *this; }
bool filter(AsyncWebServerRequest *request) const { return _filter == NULL || _filter(request); }
const String& from(void) const { return _from; }
const String& toUrl(void) const { return _toUrl; }
const String& params(void) const { return _params; }
virtual bool match(AsyncWebServerRequest *request) { return from() == request->url() && filter(request); }
};
/*
* HANDLER :: One instance can be attached to any Request (done by the Server)
* */
class AsyncWebHandler {
protected:
ArRequestFilterFunction _filter;
String _username;
String _password;
public:
AsyncWebHandler():_username(""), _password(""){}
AsyncWebHandler& setFilter(ArRequestFilterFunction fn) { _filter = fn; return *this; }
AsyncWebHandler& setAuthentication(const char *username, const char *password){ _username = String(username);_password = String(password); return *this; };
bool filter(AsyncWebServerRequest *request){ return _filter == NULL || _filter(request); }
virtual ~AsyncWebHandler(){}
virtual bool canHandle(AsyncWebServerRequest *request __attribute__((unused))){
return false;
}
virtual void handleRequest(AsyncWebServerRequest *request __attribute__((unused))){}
virtual void handleUpload(AsyncWebServerRequest *request __attribute__((unused)), const String& filename __attribute__((unused)), size_t index __attribute__((unused)), uint8_t *data __attribute__((unused)), size_t len __attribute__((unused)), bool final __attribute__((unused))){}
virtual void handleBody(AsyncWebServerRequest *request __attribute__((unused)), uint8_t *data __attribute__((unused)), size_t len __attribute__((unused)), size_t index __attribute__((unused)), size_t total __attribute__((unused))){}
virtual bool isRequestHandlerTrivial(){return true;}
};
/*
* RESPONSE :: One instance is created for each Request (attached by the Handler)
* */
typedef enum {
RESPONSE_SETUP, RESPONSE_HEADERS, RESPONSE_CONTENT, RESPONSE_WAIT_ACK, RESPONSE_END, RESPONSE_FAILED
} WebResponseState;
class AsyncWebServerResponse {
protected:
int _code;
LinkedList<AsyncWebHeader *> _headers;
String _contentType;
size_t _contentLength;
bool _sendContentLength;
bool _chunked;
size_t _headLength;
size_t _sentLength;
size_t _ackedLength;
size_t _writtenLength;
WebResponseState _state;
const char* _responseCodeToString(int code);
public:
AsyncWebServerResponse();
virtual ~AsyncWebServerResponse();
virtual void setCode(int code);
virtual void setContentLength(size_t len);
virtual void setContentType(const String& type);
virtual void addHeader(const String& name, const String& value);
virtual String _assembleHead(uint8_t version);
virtual bool _started() const;
virtual bool _finished() const;
virtual bool _failed() const;
virtual bool _sourceValid() const;
virtual void _respond(AsyncWebServerRequest *request);
virtual size_t _ack(AsyncWebServerRequest *request, size_t len, uint32_t time);
};
/*
* SERVER :: One instance
* */
typedef std::function<void(AsyncWebServerRequest *request)> ArRequestHandlerFunction;
typedef std::function<void(AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final)> ArUploadHandlerFunction;
typedef std::function<void(AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total)> ArBodyHandlerFunction;
class AsyncWebServer {
protected:
AsyncServer _server;
LinkedList<AsyncWebRewrite*> _rewrites;
LinkedList<AsyncWebHandler*> _handlers;
AsyncCallbackWebHandler* _catchAllHandler;
public:
AsyncWebServer(uint16_t port);
~AsyncWebServer();
void begin();
void end();
#if ASYNC_TCP_SSL_ENABLED
void onSslFileRequest(AcSSlFileHandler cb, void* arg);
void beginSecure(const char *cert, const char *private_key_file, const char *password);
#endif
AsyncWebRewrite& addRewrite(AsyncWebRewrite* rewrite);
bool removeRewrite(AsyncWebRewrite* rewrite);
AsyncWebRewrite& rewrite(const char* from, const char* to);
AsyncWebHandler& addHandler(AsyncWebHandler* handler);
bool removeHandler(AsyncWebHandler* handler);
AsyncCallbackWebHandler& on(const char* uri, ArRequestHandlerFunction onRequest);
AsyncCallbackWebHandler& on(const char* uri, WebRequestMethodComposite method, ArRequestHandlerFunction onRequest);
AsyncCallbackWebHandler& on(const char* uri, WebRequestMethodComposite method, ArRequestHandlerFunction onRequest, ArUploadHandlerFunction onUpload);
AsyncCallbackWebHandler& on(const char* uri, WebRequestMethodComposite method, ArRequestHandlerFunction onRequest, ArUploadHandlerFunction onUpload, ArBodyHandlerFunction onBody);
AsyncStaticWebHandler& serveStatic(const char* uri, fs::FS& fs, const char* path, const char* cache_control = NULL);
void onNotFound(ArRequestHandlerFunction fn); //called when handler is not assigned
void onFileUpload(ArUploadHandlerFunction fn); //handle file uploads
void onRequestBody(ArBodyHandlerFunction fn); //handle posts with plain body content (JSON often transmitted this way as a request)
void reset(); //remove all writers and handlers, with onNotFound/onFileUpload/onRequestBody
void _handleDisconnect(AsyncWebServerRequest *request);
void _attachHandler(AsyncWebServerRequest *request);
void _rewriteRequest(AsyncWebServerRequest *request);
};
class DefaultHeaders {
using headers_t = LinkedList<AsyncWebHeader *>;
headers_t _headers;
DefaultHeaders()
:_headers(headers_t([](AsyncWebHeader *h){ delete h; }))
{}
public:
using ConstIterator = headers_t::ConstIterator;
void addHeader(const String& name, const String& value){
_headers.add(new AsyncWebHeader(name, value));
}
ConstIterator begin() const { return _headers.begin(); }
ConstIterator end() const { return _headers.end(); }
DefaultHeaders(DefaultHeaders const &) = delete;
DefaultHeaders &operator=(DefaultHeaders const &) = delete;
static DefaultHeaders &Instance() {
static DefaultHeaders instance;
return instance;
}
};
#include "WebResponseImpl.h"
#include "WebHandlerImpl.h"
#include "AsyncWebSocket.h"
#include "AsyncEventSource.h"
#endif /* _AsyncWebServer_H_ */

544
Software/lib/ESP Async WebServer/src/SPIFFSEditor.cpp
View File

@@ -1,544 +0,0 @@
#include "SPIFFSEditor.h"
#include <FS.h>
//File: edit.htm.gz, Size: 4151
#define edit_htm_gz_len 4151
const uint8_t edit_htm_gz[] PROGMEM = {
0x1F, 0x8B, 0x08, 0x08, 0xB8, 0x94, 0xB1, 0x59, 0x00, 0x03, 0x65, 0x64, 0x69, 0x74, 0x2E, 0x68,
0x74, 0x6D, 0x00, 0xB5, 0x3A, 0x0B, 0x7B, 0xDA, 0xB8, 0xB2, 0x7F, 0xC5, 0x71, 0xCF, 0x66, 0xED,
0x83, 0x31, 0x90, 0xA4, 0xD9, 0xD6, 0xC4, 0xC9, 0x42, 0x92, 0x36, 0x6D, 0xF3, 0x6A, 0x80, 0xB6,
0x69, 0x4F, 0xEE, 0x7E, 0xC2, 0x16, 0xA0, 0xC6, 0x96, 0x5D, 0x5B, 0x0E, 0x49, 0x59, 0xFE, 0xFB,
0x9D, 0x91, 0x6C, 0xB0, 0x09, 0x69, 0x77, 0xCF, 0xBD, 0xBB, 0xDD, 0x2D, 0x92, 0x46, 0x33, 0x9A,
0x19, 0xCD, 0x53, 0xDE, 0xBD, 0x8D, 0xA3, 0x8B, 0xC3, 0xFE, 0xF5, 0xE5, 0xB1, 0x36, 0x11, 0x61,
0xB0, 0xBF, 0x87, 0x7F, 0x6B, 0x01, 0xE1, 0x63, 0x97, 0xF2, 0xFD, 0x3D, 0xC1, 0x44, 0x40, 0xF7,
0x8F, 0x7B, 0x97, 0xDA, 0xB1, 0xCF, 0x44, 0x94, 0xEC, 0x35, 0xD4, 0xCA, 0x5E, 0x2A, 0x1E, 0x02,
0xAA, 0x85, 0xD4, 0x67, 0xC4, 0x4D, 0xBD, 0x84, 0xC2, 0x66, 0xDB, 0x0B, 0x67, 0xDF, 0xEB, 0x8C,
0xFB, 0xF4, 0xDE, 0xD9, 0x6E, 0x36, 0xDB, 0x71, 0x94, 0x32, 0xC1, 0x22, 0xEE, 0x90, 0x61, 0x1A,
0x05, 0x99, 0xA0, 0xED, 0x80, 0x8E, 0x84, 0xF3, 0x3C, 0xBE, 0x6F, 0x0F, 0xA3, 0xC4, 0xA7, 0x89,
0xD3, 0x8A, 0xEF, 0x35, 0x00, 0x31, 0x5F, 0x7B, 0xB6, 0xB3, 0xB3, 0xD3, 0x1E, 0x12, 0xEF, 0x76,
0x9C, 0x44, 0x19, 0xF7, 0xEB, 0x5E, 0x14, 0x44, 0x89, 0xF3, 0x6C, 0xF4, 0x1C, 0xFF, 0xB4, 0x7D,
0x96, 0xC6, 0x01, 0x79, 0x70, 0x78, 0xC4, 0x29, 0xE0, 0xDE, 0xD7, 0xD3, 0x09, 0xF1, 0xA3, 0xA9,
0xD3, 0xD4, 0x9A, 0x5A, 0xAB, 0x09, 0x44, 0x92, 0xF1, 0x90, 0x18, 0x4D, 0x0B, 0xFF, 0xD8, 0x3B,
0x66, 0x7B, 0x14, 0x71, 0x51, 0x4F, 0xD9, 0x77, 0xEA, 0xB4, 0xB6, 0xE0, 0x34, 0x39, 0x1D, 0x91,
0x90, 0x05, 0x0F, 0x4E, 0x4A, 0x78, 0x5A, 0x4F, 0x69, 0xC2, 0x46, 0x6A, 0x79, 0x4A, 0xD9, 0x78,
0x22, 0x9C, 0xDF, 0x9A, 0xCD, 0x39, 0xF0, 0xAF, 0x65, 0xC1, 0x2C, 0x60, 0x29, 0x20, 0xA3, 0x78,
0xEA, 0x3C, 0x11, 0xC5, 0x4E, 0x53, 0xB1, 0xDE, 0x6C, 0x87, 0x24, 0x19, 0x33, 0x0E, 0x83, 0x98,
0xF8, 0x3E, 0xE3, 0x63, 0x47, 0xA1, 0x05, 0x6C, 0xB6, 0x90, 0x36, 0xA1, 0x01, 0x11, 0xEC, 0x8E,
0xB6, 0x43, 0xC6, 0xEB, 0x53, 0xE6, 0x8B, 0x89, 0xB3, 0x0B, 0x3C, 0xB6, 0xBD, 0x2C, 0x49, 0x41,
0xA6, 0x38, 0x62, 0x5C, 0xD0, 0x44, 0xA2, 0xA5, 0x31, 0xE1, 0xB3, 0x5C, 0x54, 0x54, 0x40, 0x21,
0x27, 0xE3, 0x01, 0xE3, 0xB4, 0x3E, 0x0C, 0x22, 0xEF, 0x76, 0x71, 0xD2, 0x6E, 0x7C, 0x9F, 0x9F,
0xE5, 0x4C, 0xA2, 0x3B, 0x9A, 0xCC, 0x96, 0xEA, 0x92, 0xD8, 0x15, 0x60, 0x85, 0x34, 0xA5, 0x74,
0x6E, 0x8B, 0xBB, 0x0C, 0xA0, 0x96, 0xFC, 0x05, 0x29, 0x17, 0xFC, 0x2F, 0x45, 0x5A, 0x11, 0x5C,
0xA1, 0x30, 0x1E, 0x67, 0x62, 0xF6, 0xF8, 0x2A, 0xA3, 0x98, 0x78, 0x4C, 0x3C, 0xA0, 0xFC, 0xB0,
0x6D, 0x86, 0xBA, 0x04, 0xAC, 0x24, 0x24, 0x81, 0x86, 0x3A, 0xD7, 0x3E, 0xD0, 0xC4, 0x27, 0x9C,
0x58, 0x9D, 0x84, 0x91, 0xC0, 0xEA, 0x2D, 0xB5, 0x5E, 0x0F, 0xA3, 0xEF, 0xF5, 0x0C, 0xC6, 0x30,
0x0F, 0xA8, 0x27, 0x94, 0x92, 0xE1, 0x1E, 0x86, 0xB7, 0x4C, 0x3C, 0x06, 0x3C, 0x5A, 0x28, 0xA9,
0x4B, 0x2A, 0x69, 0xA2, 0x2E, 0xB0, 0x25, 0xD5, 0x83, 0x1C, 0x4B, 0xC9, 0x95, 0x50, 0xF5, 0x61,
0x24, 0x44, 0x14, 0x4A, 0x93, 0x5B, 0x08, 0xAC, 0x49, 0xAB, 0x79, 0xF1, 0xE8, 0x46, 0xD6, 0x6B,
0xBF, 0x44, 0xBE, 0x0D, 0x7A, 0x15, 0xCC, 0x23, 0x41, 0x9D, 0x04, 0x6C, 0xCC, 0x9D, 0x90, 0xF9,
0x7E, 0x40, 0x4B, 0x56, 0xEB, 0x64, 0x49, 0x60, 0xF8, 0x44, 0x10, 0x87, 0x85, 0x64, 0x4C, 0x1B,
0x31, 0x1F, 0x03, 0x34, 0xA5, 0xBB, 0x3B, 0x16, 0xFB, 0xD0, 0xBD, 0xB8, 0x9A, 0x36, 0xDF, 0xBD,
0x1E, 0x47, 0x1D, 0xF8, 0xE7, 0xBC, 0x37, 0x98, 0x1C, 0x0F, 0xC6, 0x30, 0xEA, 0xE2, 0xB4, 0xF3,
0xFE, 0xB0, 0xF3, 0x1E, 0x7E, 0x0E, 0x5B, 0xB5, 0xAF, 0xA3, 0x6F, 0xB8, 0xD0, 0x7D, 0xED, 0x77,
0xFB, 0x83, 0xE3, 0x4E, 0xE7, 0x5D, 0xE3, 0xCD, 0xF9, 0xF4, 0xE3, 0xBB, 0x5D, 0x04, 0x77, 0x83,
0xE6, 0xD5, 0x87, 0x49, 0x73, 0xB0, 0xF5, 0x32, 0xF4, 0x4F, 0xFC, 0x89, 0x17, 0x0E, 0x3A, 0xEF,
0x3F, 0x5E, 0xDD, 0x5D, 0x87, 0x83, 0x71, 0xEF, 0x63, 0x6B, 0xF2, 0x79, 0xEB, 0x43, 0xEF, 0xF3,
0xC7, 0x57, 0xB7, 0xF4, 0xD3, 0xC9, 0xDB, 0xCF, 0xFD, 0x29, 0x20, 0x1C, 0x45, 0xBD, 0xC1, 0x55,
0xF7, 0x43, 0x77, 0xFC, 0xB9, 0xEB, 0x1D, 0xDF, 0x0F, 0x83, 0xF3, 0xEE, 0xEB, 0xCE, 0xB0, 0xB3,
0xE5, 0x51, 0x3A, 0xEE, 0x5F, 0x75, 0xB3, 0x37, 0xEF, 0x2E, 0xC6, 0x8C, 0x4D, 0x7A, 0x9F, 0xCF,
0xFB, 0xDE, 0xE1, 0xF3, 0xD3, 0xC1, 0x49, 0x87, 0x4D, 0xCE, 0xDF, 0x5E, 0x35, 0x6F, 0x5F, 0xBF,
0x3B, 0x3C, 0xF2, 0xAE, 0xDF, 0x5E, 0xEF, 0x1E, 0x6D, 0x37, 0x7E, 0xFB, 0xED, 0xCC, 0xBF, 0x60,
0xBC, 0x7F, 0xF7, 0xBD, 0x33, 0x3E, 0x9C, 0xBE, 0x78, 0x48, 0xFB, 0x93, 0x37, 0x77, 0xBC, 0xF1,
0x21, 0xFA, 0xFA, 0xE6, 0xE1, 0x0C, 0xFE, 0xBB, 0xBC, 0xAC, 0x0D, 0x7B, 0xAD, 0x74, 0xF0, 0xFE,
0xCD, 0x87, 0xAD, 0xF4, 0xE5, 0xF3, 0xB8, 0x7B, 0x74, 0x74, 0x17, 0x0E, 0x2F, 0x1B, 0xA1, 0x7F,
0x3B, 0x12, 0x2F, 0xB6, 0x45, 0x7C, 0x3D, 0xCE, 0x3E, 0x7F, 0x7B, 0xFE, 0x76, 0xD2, 0xB8, 0xA0,
0xE4, 0x7A, 0x52, 0x7B, 0xF8, 0xFE, 0xF0, 0x62, 0xD2, 0x3F, 0xB9, 0x3B, 0x0F, 0xC8, 0xFD, 0xF9,
0xB9, 0xF7, 0x3D, 0xAC, 0x05, 0xE4, 0xE5, 0x45, 0x3F, 0x20, 0x49, 0x6B, 0xE0, 0x77, 0x1A, 0xB5,
0xC3, 0xAD, 0xCE, 0x8E, 0x48, 0xAE, 0x0E, 0xF9, 0xD1, 0xF6, 0xD7, 0xDE, 0x8B, 0x6E, 0xB7, 0x15,
0x0D, 0xBF, 0x6D, 0xBD, 0xBE, 0xDD, 0x7D, 0x3D, 0xD8, 0x7D, 0x3F, 0x7C, 0xDF, 0xE9, 0xED, 0x74,
0x07, 0xE4, 0xBA, 0xF7, 0xBE, 0x33, 0xDA, 0x19, 0x4E, 0x26, 0xEF, 0xDE, 0xF5, 0x5F, 0xF9, 0x9D,
0xEF, 0x49, 0xE7, 0x62, 0xDA, 0xB9, 0x3F, 0x1E, 0x74, 0x4E, 0x6A, 0xEF, 0x8E, 0xCF, 0x9A, 0xAD,
0xDE, 0xF5, 0xF6, 0xF8, 0x6C, 0x77, 0xDA, 0x4D, 0x8F, 0x3B, 0xEF, 0xBB, 0xCD, 0xF1, 0xDB, 0x5A,
0x48, 0x3E, 0x47, 0x87, 0xDB, 0xE3, 0x37, 0xBB, 0xEC, 0xF2, 0x9A, 0x74, 0xDE, 0x74, 0xDF, 0xA6,
0xEC, 0x2A, 0x3C, 0x19, 0x34, 0x3B, 0x9D, 0xD3, 0x0B, 0xFA, 0xEA, 0x70, 0x9B, 0xBC, 0xDB, 0xF2,
0x3E, 0x82, 0xFE, 0x07, 0x9F, 0xE8, 0x6F, 0xB5, 0xCE, 0xF4, 0xA2, 0x19, 0x78, 0x2F, 0x69, 0xFF,
0xE4, 0xBA, 0x2F, 0x6F, 0xE7, 0x38, 0x78, 0xD5, 0xBF, 0xED, 0x65, 0xEF, 0xC3, 0xC3, 0x43, 0x53,
0xE3, 0x51, 0x3D, 0xA1, 0x31, 0x25, 0xA2, 0x1C, 0xAE, 0x16, 0xFE, 0x01, 0xB6, 0xB5, 0xB4, 0xC2,
0xDC, 0x4F, 0x05, 0xBD, 0x17, 0x75, 0x9F, 0x7A, 0x51, 0x42, 0xE4, 0x1E, 0x40, 0xA0, 0x09, 0x9A,
0xD8, 0xFC, 0x77, 0x19, 0x3F, 0x35, 0x15, 0x3F, 0x35, 0xC2, 0x7D, 0xCD, 0x28, 0x1C, 0x01, 0x83,
0x87, 0x4F, 0xEF, 0x98, 0x47, 0xEB, 0x31, 0xBB, 0xA7, 0x41, 0x5D, 0x22, 0x3B, 0x4D, 0x73, 0x26,
0xFD, 0xAD, 0xD8, 0x46, 0x38, 0x98, 0x9A, 0xA4, 0x5A, 0x2C, 0xF8, 0x5F, 0x89, 0x47, 0x21, 0xB0,
0x81, 0xCB, 0x84, 0xF8, 0xAB, 0x7C, 0x27, 0x4A, 0xEA, 0xC3, 0x6C, 0x3C, 0x62, 0xF7, 0xE0, 0xD0,
0x23, 0xC6, 0x99, 0xA0, 0x5A, 0x2B, 0x9D, 0xFF, 0x5E, 0x90, 0xB9, 0xA5, 0x0F, 0xA3, 0x84, 0x84,
0x34, 0xD5, 0xFE, 0x22, 0x99, 0xD9, 0x28, 0x89, 0xC2, 0x65, 0x10, 0x99, 0x8B, 0xA8, 0x34, 0x99,
0xCF, 0x9F, 0x65, 0x71, 0x10, 0x11, 0x10, 0x73, 0x4D, 0xE4, 0x50, 0xF1, 0x34, 0x91, 0x6E, 0xB5,
0x88, 0xAB, 0xB9, 0x9B, 0x6D, 0xA1, 0x5B, 0x96, 0xDD, 0x7A, 0x6B, 0x67, 0xE9, 0xBA, 0x75, 0xB9,
0x17, 0xE3, 0xFD, 0x9A, 0x4C, 0x81, 0xF1, 0xA0, 0x14, 0xEE, 0x9E, 0x09, 0x50, 0xE9, 0x13, 0x87,
0xCB, 0x43, 0xF2, 0xC8, 0xB0, 0x60, 0x40, 0x05, 0xEA, 0x96, 0x8C, 0xD4, 0x85, 0x24, 0xB0, 0x6F,
0xFE, 0x8C, 0xCA, 0xBC, 0x67, 0x3D, 0x8B, 0x13, 0xB8, 0x0D, 0x3A, 0xFD, 0x11, 0xCD, 0x42, 0xA6,
0x2A, 0x6D, 0x45, 0x53, 0x65, 0xBC, 0x5C, 0x84, 0x65, 0xDA, 0x93, 0xBC, 0x16, 0xA4, 0x1F, 0x4B,
0x05, 0xE0, 0x05, 0x37, 0xCF, 0x91, 0x9B, 0x1F, 0x6A, 0x75, 0x7B, 0xF7, 0x97, 0x9C, 0x87, 0x9D,
0xE6, 0x2F, 0x73, 0x3B, 0xDF, 0x5B, 0xA4, 0xE4, 0x56, 0x13, 0xFE, 0x29, 0x32, 0xEF, 0x8B, 0x25,
0x0B, 0xC3, 0xE7, 0xF8, 0xA7, 0x60, 0x10, 0xE9, 0x94, 0x80, 0xDB, 0x3B, 0x2F, 0x5F, 0xF8, 0xC3,
0x02, 0x98, 0x0B, 0xF6, 0x24, 0x3C, 0x21, 0x3E, 0xCB, 0x52, 0xE7, 0x79, 0xF3, 0x97, 0x5C, 0x9F,
0x5B, 0x3B, 0x28, 0xFB, 0xE2, 0x2E, 0x71, 0xB2, 0xB4, 0xD8, 0x34, 0x66, 0x5C, 0xDB, 0x4A, 0x35,
0xBC, 0x6F, 0x92, 0x2C, 0x0C, 0xB3, 0x92, 0xED, 0xE7, 0xBF, 0x2F, 0x4D, 0x13, 0xF7, 0xCF, 0x9A,
0xBF, 0xCC, 0x44, 0x02, 0xD9, 0x64, 0x04, 0xB9, 0xC6, 0x49, 0x22, 0x41, 0x04, 0x35, 0x9A, 0xE6,
0x1C, 0x84, 0x5B, 0x03, 0xD8, 0xDE, 0x6D, 0xFA, 0x74, 0x6C, 0xCE, 0xE7, 0x7B, 0x0D, 0x99, 0xD7,
0xA0, 0x6C, 0xF1, 0x12, 0x16, 0x8B, 0xFD, 0x51, 0xC6, 0x3D, 0xE4, 0x41, 0x1B, 0x53, 0x83, 0x9A,
0xB3, 0x84, 0x8A, 0x2C, 0xE1, 0x9A, 0x1F, 0x79, 0x19, 0x1A, 0xBB, 0x3D, 0xA6, 0xE2, 0x58, 0xD9,
0x7D, 0xF7, 0xE1, 0x8D, 0x0F, 0x3B, 0xE6, 0x0B, 0x04, 0x6F, 0x2D, 0x02, 0x38, 0x30, 0x9C, 0x97,
0xE3, 0x54, 0xF6, 0x43, 0x82, 0x01, 0x22, 0xEF, 0xE8, 0x83, 0x41, 0x2D, 0xB1, 0x40, 0xA4, 0x36,
0xAE, 0x1B, 0xC5, 0x2E, 0x80, 0x71, 0x73, 0x76, 0x07, 0x4A, 0x20, 0x2E, 0xFD, 0x22, 0x6E, 0x2C,
0xE6, 0x72, 0xF8, 0x69, 0xE7, 0xBB, 0xC9, 0x1E, 0x3B, 0xA8, 0xB7, 0x1C, 0xB2, 0xCF, 0x0E, 0x5A,
0xE0, 0x5E, 0x65, 0x6E, 0xE4, 0xB9, 0xAF, 0x58, 0x40, 0x07, 0xB9, 0xC3, 0xE1, 0x31, 0x48, 0x6C,
0xB1, 0x85, 0x28, 0xE2, 0x5B, 0xCD, 0xE6, 0x86, 0x4B, 0x0F, 0x48, 0x00, 0x39, 0xCC, 0xD0, 0x8F,
0xAF, 0xAE, 0x2E, 0xAE, 0xBE, 0xE8, 0x35, 0x5A, 0xD3, 0x6F, 0x1C, 0x4D, 0xAF, 0x71, 0xD3, 0x11,
0x76, 0x42, 0x47, 0x09, 0x4D, 0x27, 0x97, 0x44, 0x4C, 0x8C, 0xD4, 0xBE, 0x23, 0x41, 0x56, 0x16,
0x84, 0xA1, 0xDC, 0xC8, 0xA2, 0x70, 0x39, 0x9D, 0x6A, 0xAF, 0x40, 0xCD, 0x47, 0x90, 0xEA, 0xDA,
0xC2, 0x26, 0x71, 0x4C, 0xB9, 0x6F, 0xE8, 0x31, 0x20, 0xEA, 0x16, 0x35, 0xAD, 0x84, 0x7E, 0xCB,
0x68, 0x2A, 0x52, 0x1B, 0x2C, 0xD7, 0xD0, 0x2F, 0x07, 0x7D, 0xDD, 0xD2, 0x1B, 0xE8, 0x47, 0x3A,
0xF0, 0x46, 0xCC, 0x39, 0x52, 0x89, 0x5C, 0xD0, 0xA4, 0x3E, 0xCC, 0xC0, 0xA0, 0xB8, 0x6E, 0xB6,
0x23, 0x9B, 0x71, 0x4E, 0x93, 0x93, 0xFE, 0xD9, 0xA9, 0xAB, 0x5F, 0x29, 0x46, 0xB4, 0x53, 0x28,
0x48, 0x74, 0x4B, 0x5E, 0x51, 0x7E, 0xC8, 0xE1, 0x84, 0x05, 0xBE, 0x11, 0x99, 0x6D, 0x24, 0xE1,
0x49, 0x12, 0xB2, 0x40, 0x01, 0x0A, 0x9E, 0x2D, 0x1E, 0x62, 0xEA, 0xEA, 0x23, 0x50, 0x86, 0x6E,
0x79, 0x76, 0x98, 0x05, 0x82, 0xC5, 0x01, 0x75, 0x37, 0x5A, 0x30, 0xE3, 0x60, 0x41, 0xAE, 0x8E,
0xB9, 0x19, 0x61, 0xCC, 0x77, 0x75, 0x15, 0xA1, 0xF2, 0xB8, 0xB6, 0xEE, 0x14, 0x4F, 0x9D, 0x92,
0x56, 0x4E, 0x49, 0xCB, 0xB8, 0x4A, 0xE0, 0x34, 0x3F, 0x18, 0xC3, 0x3C, 0xCE, 0xD4, 0x51, 0x05,
0xCC, 0xA7, 0x23, 0x02, 0x9C, 0x7C, 0x40, 0x6D, 0xBA, 0x7A, 0x63, 0xDD, 0x41, 0xA9, 0x3A, 0xC8,
0xAF, 0x6A, 0xC4, 0x2F, 0x6B, 0x44, 0xDD, 0xEE, 0x3A, 0x64, 0x5F, 0x21, 0x07, 0x55, 0xE4, 0xA0,
0x8C, 0x7C, 0x28, 0x8D, 0x64, 0x1D, 0x72, 0xA0, 0x90, 0x93, 0x8A, 0x88, 0x89, 0x14, 0x51, 0x85,
0xBD, 0x3A, 0x6A, 0x13, 0x05, 0xD2, 0xAD, 0xA4, 0x22, 0x66, 0x62, 0x83, 0x97, 0x92, 0x61, 0x40,
0x7D, 0x77, 0xA3, 0x09, 0x33, 0x2C, 0xB6, 0xDD, 0xAD, 0xE6, 0x9A, 0x33, 0x12, 0x75, 0x46, 0x56,
0x65, 0x30, 0x2B, 0x33, 0xA8, 0xF5, 0xC8, 0x1D, 0xD5, 0xD6, 0x31, 0x98, 0x99, 0x56, 0x60, 0x47,
0xDC, 0x0B, 0x98, 0x77, 0xEB, 0x2E, 0xBD, 0xC5, 0x9C, 0xB1, 0x85, 0x85, 0x5A, 0x5C, 0x06, 0xBA,
0x01, 0x94, 0x5E, 0x8B, 0xA5, 0x7C, 0x80, 0xFA, 0x9E, 0x5B, 0xD9, 0x5A, 0x02, 0xDC, 0xA6, 0xF7,
0xD4, 0x3B, 0x8C, 0xC2, 0x90, 0xA0, 0xED, 0xA6, 0xC0, 0x41, 0x3E, 0xD1, 0xCD, 0xB9, 0x15, 0xAD,
0xC5, 0x79, 0xC2, 0x45, 0x2C, 0x7F, 0x3D, 0x8B, 0x23, 0x03, 0x5C, 0xCE, 0xF5, 0x6C, 0xD4, 0x61,
0x6A, 0x83, 0x1E, 0xC7, 0x62, 0xF2, 0x13, 0x17, 0x2A, 0x0C, 0x54, 0xA2, 0x7C, 0x69, 0xDE, 0x58,
0x0B, 0x91, 0x56, 0x7C, 0xEA, 0xA2, 0xB7, 0xE2, 0x54, 0xA8, 0xBC, 0x8A, 0x5D, 0x9A, 0x4B, 0x1D,
0x94, 0x61, 0xB9, 0xBD, 0x2F, 0xA0, 0xFA, 0x7C, 0x0E, 0xE7, 0x01, 0xFF, 0x13, 0x68, 0xF9, 0xE8,
0x5F, 0x17, 0x60, 0xC9, 0xA3, 0x34, 0x78, 0x8B, 0xBB, 0x0D, 0xE3, 0xC0, 0xF9, 0x8F, 0x6D, 0x7C,
0xF9, 0x1F, 0xFB, 0xA6, 0x66, 0x9A, 0x07, 0xFF, 0x6A, 0x48, 0x0D, 0x1B, 0xC2, 0xFC, 0xD2, 0xBA,
0xB1, 0x08, 0x80, 0xED, 0x7F, 0x9B, 0xFF, 0xB1, 0x25, 0xB8, 0x02, 0x6B, 0xDF, 0x45, 0x90, 0x49,
0xF0, 0x24, 0x34, 0xB0, 0x68, 0xA4, 0x91, 0xCD, 0x4D, 0x43, 0xB8, 0xA4, 0x72, 0x8D, 0x35, 0x51,
0xD3, 0x6D, 0x88, 0x53, 0x50, 0x5B, 0xAC, 0x04, 0xBF, 0x3E, 0x24, 0x7A, 0x15, 0x5B, 0x17, 0x00,
0xC9, 0x3D, 0xCA, 0x0C, 0x3D, 0x22, 0x97, 0x52, 0xCB, 0x0C, 0x02, 0x42, 0xA7, 0x89, 0xE7, 0x2A,
0xAD, 0x1D, 0x14, 0x30, 0x17, 0xA2, 0xE0, 0xBC, 0x1C, 0x2D, 0x15, 0xEA, 0xAA, 0xFD, 0x17, 0x0A,
0xA3, 0xD6, 0x12, 0x8A, 0x04, 0x31, 0xAD, 0xD8, 0x79, 0xC6, 0x72, 0x75, 0x4C, 0x59, 0xBA, 0x35,
0x59, 0x5D, 0x96, 0xAD, 0x04, 0xAE, 0x2F, 0x8D, 0xFE, 0xD7, 0x3D, 0x16, 0x8E, 0xB5, 0x12, 0x3F,
0xF8, 0x97, 0xFB, 0x2B, 0x46, 0xE4, 0xCD, 0x3F, 0xBC, 0x21, 0x70, 0x05, 0xA6, 0x41, 0x6D, 0x1E,
0x4D, 0x0D, 0xB3, 0xF6, 0xAB, 0xAE, 0x49, 0x8A, 0xAE, 0x1E, 0x92, 0xFB, 0xBC, 0xA7, 0xC4, 0x8C,
0xD7, 0xD6, 0x70, 0x5E, 0xB4, 0x28, 0xF9, 0x82, 0xEC, 0xE6, 0x48, 0x26, 0xA2, 0xB6, 0x56, 0x64,
0x52, 0xD5, 0xCA, 0xE8, 0x5A, 0x63, 0xFF, 0xD7, 0x4A, 0x40, 0xB7, 0x98, 0xBA, 0x4E, 0x15, 0x8C,
0xB3, 0x00, 0x1C, 0x93, 0x3E, 0x1D, 0x69, 0x03, 0x26, 0x03, 0x75, 0x35, 0x46, 0x5A, 0x81, 0xC1,
0xCC, 0x03, 0xC3, 0x2B, 0xFB, 0xF3, 0x1E, 0x16, 0xBF, 0xFB, 0x97, 0xAA, 0xAA, 0x81, 0xD4, 0x8B,
0x33, 0x5D, 0x59, 0x59, 0xD5, 0x4B, 0xE0, 0xD2, 0x08, 0xA0, 0x5B, 0x8B, 0x3C, 0x3A, 0x8C, 0xFC,
0x87, 0x52, 0xF6, 0x4D, 0xBB, 0x0F, 0x87, 0x01, 0x49, 0xD3, 0x73, 0xB8, 0x01, 0x43, 0xF7, 0x42,
0x50, 0xB8, 0xB2, 0xC2, 0xFD, 0xE6, 0xE6, 0x66, 0x15, 0x29, 0xA1, 0x21, 0x14, 0xDB, 0x8A, 0x2B,
0xF0, 0x49, 0xD3, 0xF1, 0x81, 0x30, 0x18, 0xD2, 0x1A, 0xC6, 0xF0, 0x25, 0xE3, 0x47, 0x5C, 0x71,
0xF4, 0xF4, 0x22, 0xA6, 0xFC, 0x33, 0xDC, 0x95, 0x32, 0xCB, 0x1A, 0xAD, 0xA6, 0x68, 0xFA, 0x8F,
0xD8, 0x3E, 0xCA, 0x0D, 0x76, 0xC1, 0x7A, 0xBA, 0x56, 0xA1, 0xFC, 0x9F, 0x61, 0xB9, 0x94, 0x28,
0xD6, 0x70, 0x9C, 0x40, 0x80, 0x5A, 0xC3, 0x31, 0xC4, 0x1A, 0x41, 0x17, 0xFC, 0x26, 0x6B, 0xF9,
0xCD, 0xFE, 0x19, 0x7E, 0x97, 0x76, 0x1E, 0x15, 0x25, 0x91, 0xAA, 0xAF, 0x50, 0x02, 0x9F, 0xDD,
0xE9, 0xA6, 0x15, 0xB9, 0x55, 0x0A, 0x50, 0x1B, 0x46, 0x41, 0xD0, 0x8F, 0xE2, 0x83, 0x27, 0xD6,
0x9D, 0xC5, 0x7A, 0x31, 0xC8, 0xD9, 0x5C, 0x6E, 0xB1, 0xBC, 0xB5, 0x44, 0x4F, 0xA1, 0xEC, 0x5F,
0x4B, 0x15, 0x01, 0x3F, 0x23, 0x8B, 0x7B, 0xAC, 0xD4, 0xA5, 0x36, 0x28, 0x0F, 0x56, 0x3F, 0xD5,
0x3C, 0xCB, 0x5F, 0xCC, 0xAE, 0x6B, 0x51, 0x9B, 0xC0, 0x38, 0x57, 0x92, 0x8B, 0x4A, 0xB2, 0xC8,
0x13, 0x01, 0xA8, 0x58, 0xC7, 0x2E, 0xC4, 0x4D, 0x6B, 0x7A, 0x7C, 0xBF, 0x5C, 0x83, 0xC2, 0xDF,
0xF5, 0xD5, 0x12, 0x33, 0x08, 0xC4, 0xD3, 0x95, 0x4B, 0x29, 0x5F, 0x37, 0x29, 0x8A, 0x0E, 0x62,
0x47, 0xA3, 0x51, 0x4A, 0xC5, 0x47, 0x0C, 0x49, 0x56, 0xB2, 0x98, 0x9F, 0xC8, 0x90, 0x04, 0x8C,
0x45, 0x3C, 0x8C, 0xB2, 0x94, 0x46, 0x99, 0xA8, 0xA4, 0x16, 0x63, 0x21, 0xCC, 0x5E, 0xFA, 0xE7,
0x9F, 0x8B, 0xC9, 0x7E, 0x5A, 0x0B, 0x96, 0xD3, 0xEB, 0x3D, 0xBF, 0x34, 0xD9, 0xF7, 0x6B, 0x89,
0xB9, 0x7A, 0xE9, 0xFF, 0x67, 0x4B, 0x21, 0x65, 0x4B, 0xF1, 0xB0, 0x54, 0x2E, 0x62, 0x62, 0x29,
0xE6, 0xC9, 0x82, 0x91, 0x97, 0x7C, 0x16, 0x0D, 0x1A, 0x2B, 0x25, 0x55, 0x9E, 0x97, 0x7D, 0x95,
0x43, 0x40, 0x59, 0x71, 0xE5, 0x35, 0x11, 0x06, 0x34, 0xE0, 0x63, 0x64, 0xF2, 0x41, 0xEB, 0xA7,
0xD1, 0x94, 0x26, 0x87, 0x24, 0xA5, 0x06, 0x24, 0xCD, 0x65, 0xDC, 0x41, 0xA8, 0xE9, 0x04, 0xEB,
0x76, 0x6D, 0x6E, 0x12, 0x05, 0xCE, 0x33, 0x77, 0xC4, 0xB1, 0x26, 0x03, 0xF9, 0xB2, 0xCA, 0x09,
0xD4, 0xC6, 0xBE, 0x12, 0xA4, 0x3E, 0x52, 0x25, 0xA8, 0x61, 0x5A, 0xD0, 0x76, 0xC0, 0x35, 0x5F,
0x26, 0x51, 0x4C, 0xC6, 0xB2, 0x07, 0x83, 0x35, 0x74, 0x0F, 0xA4, 0x66, 0x6D, 0x34, 0x91, 0x60,
0xA9, 0x73, 0x29, 0xFC, 0x66, 0xD9, 0xC2, 0x70, 0x4B, 0x57, 0xC9, 0xB0, 0xBD, 0xF4, 0xA5, 0x35,
0x59, 0x83, 0xE0, 0x0B, 0x6C, 0x62, 0xE0, 0x1E, 0x68, 0x64, 0xF2, 0x7B, 0x00, 0x77, 0x6B, 0xB6,
0xA3, 0x3D, 0xD6, 0x8E, 0x6A, 0x35, 0x53, 0x55, 0xE9, 0xAE, 0x0B, 0x6D, 0x4E, 0x74, 0x23, 0x0B,
0x4B, 0x10, 0xAA, 0x9A, 0x59, 0x0C, 0x38, 0x1B, 0x81, 0xAA, 0xBA, 0xC0, 0x11, 0xD6, 0x98, 0x66,
0xA9, 0x23, 0xF1, 0x97, 0x1D, 0xC9, 0x13, 0xB5, 0x07, 0x95, 0xF5, 0x05, 0xD4, 0x31, 0xAB, 0x25,
0x86, 0x30, 0xD3, 0x29, 0x13, 0xDE, 0x04, 0x03, 0x90, 0x07, 0x5A, 0xD5, 0x05, 0x14, 0xB5, 0x8E,
0x1C, 0x4D, 0x44, 0xB8, 0x1C, 0x05, 0xF9, 0xF0, 0x6B, 0x9A, 0x0F, 0xBC, 0xB4, 0x18, 0xDD, 0x97,
0x80, 0x50, 0xD2, 0xE6, 0xE0, 0x88, 0x8F, 0xF2, 0x21, 0xF4, 0xB2, 0x05, 0x9D, 0x02, 0x58, 0xFC,
0xC6, 0x71, 0x3E, 0x8A, 0x27, 0xC5, 0x68, 0x42, 0xEF, 0x17, 0x78, 0x51, 0x01, 0xF5, 0xA9, 0xEE,
0x28, 0x1B, 0xDB, 0x68, 0xCE, 0xF3, 0x41, 0x6B, 0x29, 0x7F, 0xF0, 0xFF, 0x28, 0x7F, 0xCC, 0xC7,
0x85, 0x34, 0x71, 0x31, 0x1A, 0xB3, 0x42, 0x96, 0x61, 0x18, 0xFF, 0x90, 0x93, 0xA4, 0xD4, 0x13,
0x97, 0x7A, 0x5A, 0xF1, 0xB3, 0xB6, 0x53, 0x98, 0x8E, 0x31, 0xAA, 0xF8, 0xE3, 0xC8, 0xF6, 0xF0,
0xF7, 0x3C, 0xF2, 0x65, 0x6D, 0x69, 0x5A, 0xA1, 0x31, 0x82, 0x3A, 0x57, 0x37, 0xCB, 0x7E, 0x9A,
0xFD, 0xB7, 0xAD, 0xE8, 0xD1, 0xF1, 0xE9, 0x71, 0xFF, 0xB8, 0x5C, 0x38, 0x23, 0xE7, 0x25, 0x93,
0x8A, 0x2B, 0x5D, 0xFA, 0xB2, 0x22, 0x80, 0x02, 0x1B, 0x45, 0x01, 0x7B, 0xDD, 0xDC, 0x54, 0x7E,
0xF1, 0xB6, 0x77, 0x71, 0x6E, 0xC7, 0x24, 0x01, 0x8F, 0x24, 0x15, 0xE6, 0xC2, 0x82, 0x44, 0xF9,
0xE0, 0xD7, 0xC7, 0xA5, 0x72, 0x5D, 0x7E, 0x61, 0x70, 0xC4, 0xDC, 0x52, 0xA7, 0xA9, 0x7E, 0x78,
0xE2, 0x62, 0x5D, 0x99, 0xBF, 0x04, 0x41, 0x72, 0x1A, 0x2D, 0x13, 0x55, 0x11, 0x67, 0x46, 0xE5,
0x30, 0x2F, 0xEE, 0xB2, 0x75, 0x0D, 0xD3, 0xC8, 0xB4, 0xC4, 0x84, 0xA5, 0xE5, 0x46, 0xA5, 0x12,
0x14, 0xFE, 0xA2, 0xB6, 0xE7, 0x8B, 0x91, 0x24, 0xB7, 0x5A, 0x73, 0xAB, 0x6F, 0x41, 0x2A, 0x3E,
0x58, 0x04, 0x23, 0x66, 0x39, 0xDB, 0x16, 0x77, 0xA3, 0x43, 0xEE, 0x61, 0x5C, 0x7F, 0xBA, 0x35,
0x78, 0xD2, 0x3C, 0x79, 0x61, 0x9E, 0xFC, 0xB1, 0x7B, 0x2E, 0x1C, 0x45, 0xF9, 0xDA, 0xE2, 0x98,
0xF6, 0x10, 0x58, 0xBB, 0x6D, 0x2F, 0x7D, 0x18, 0x20, 0xD2, 0x83, 0xCB, 0x00, 0xF4, 0x63, 0x58,
0xFF, 0x4A, 0xEE, 0x88, 0x7A, 0x09, 0xAA, 0xA2, 0xAD, 0x73, 0x54, 0xD8, 0xEE, 0xFD, 0x81, 0xA3,
0xF2, 0xCE, 0x65, 0x18, 0x48, 0x97, 0xC3, 0x92, 0x37, 0x8B, 0x75, 0xC1, 0x61, 0x19, 0x31, 0x64,
0x6C, 0x00, 0xE3, 0xCD, 0x5D, 0x49, 0x13, 0xD5, 0x1C, 0xB4, 0xF0, 0x1B, 0x08, 0x8A, 0x4F, 0x39,
0xCE, 0x9A, 0x38, 0xAD, 0x62, 0x72, 0xC5, 0x23, 0xC8, 0x4A, 0x67, 0x89, 0xC0, 0x6E, 0x10, 0x0D,
0x0D, 0x7C, 0x64, 0x9A, 0xA1, 0xB6, 0x1D, 0x3E, 0x37, 0xD7, 0xBC, 0xD9, 0x54, 0xFA, 0x4B, 0x62,
0x79, 0xD5, 0xB0, 0x8B, 0x1C, 0x56, 0xCC, 0x75, 0x7D, 0x1F, 0xF4, 0xA3, 0x4E, 0x29, 0xAF, 0x48,
0xA4, 0x53, 0xD1, 0x83, 0xC4, 0x86, 0xA2, 0x41, 0xBE, 0x91, 0x40, 0x44, 0x72, 0x4A, 0x33, 0x5D,
0xC7, 0xCA, 0xD2, 0x0B, 0x28, 0x49, 0x7A, 0xB2, 0x73, 0x95, 0x49, 0x6B, 0x25, 0x06, 0xFE, 0xC8,
0xD7, 0xF0, 0xC7, 0xA1, 0xD0, 0xA3, 0x83, 0x9B, 0x49, 0x2B, 0x83, 0xA4, 0x23, 0x64, 0x83, 0xA9,
0x37, 0xE4, 0xBB, 0xA8, 0x2D, 0x2F, 0xCB, 0xB4, 0x16, 0x50, 0x70, 0x71, 0x83, 0xBB, 0x11, 0x30,
0x52, 0x5A, 0xC4, 0x9E, 0x94, 0xA8, 0xC7, 0x8F, 0x10, 0x1F, 0x53, 0x4A, 0x20, 0x06, 0x20, 0xA6,
0x40, 0xD0, 0xA7, 0x42, 0x8A, 0x54, 0xE6, 0x92, 0x53, 0x2A, 0x20, 0xCA, 0x48, 0xCD, 0xE2, 0xC1,
0x85, 0x78, 0xD4, 0x46, 0xD6, 0x80, 0xFD, 0xDC, 0xBD, 0x73, 0x33, 0xDE, 0x90, 0x68, 0x09, 0x56,
0x36, 0x3D, 0x9A, 0xA6, 0x52, 0x5C, 0x54, 0xC7, 0x19, 0xF8, 0xA8, 0xA1, 0x03, 0x5A, 0x23, 0x84,
0x11, 0x1E, 0x84, 0x8A, 0x01, 0x40, 0x7F, 0x42, 0xC3, 0x1C, 0x22, 0x70, 0x08, 0x20, 0x82, 0xA0,
0x7F, 0x49, 0x0D, 0xF7, 0x64, 0x05, 0xC9, 0xF8, 0xD8, 0x6D, 0x35, 0xF0, 0x9D, 0x66, 0x95, 0xEC,
0x20, 0xA5, 0xBD, 0x68, 0x24, 0xFA, 0x64, 0x98, 0x1A, 0x50, 0x00, 0xAC, 0xD9, 0x01, 0xA0, 0x1E,
0x24, 0x5E, 0x63, 0x2B, 0x3F, 0xEF, 0x04, 0x2A, 0xBB, 0x00, 0xAB, 0xBB, 0x8E, 0x87, 0x5F, 0x39,
0x4F, 0x19, 0xA7, 0x39, 0x26, 0x00, 0x7B, 0x93, 0x68, 0x7A, 0x99, 0x30, 0x2E, 0xCE, 0x64, 0x1B,
0x6A, 0x6C, 0xB4, 0xE4, 0xF5, 0xA9, 0x87, 0x15, 0x79, 0x3F, 0xC5, 0x8B, 0xCB, 0x0C, 0xF3, 0xBA,
0x53, 0x79, 0x77, 0xB1, 0x86, 0x70, 0x21, 0x50, 0x66, 0x38, 0xB3, 0x29, 0x74, 0xB0, 0xFA, 0xA1,
0x48, 0x82, 0x7A, 0x4F, 0xB7, 0x42, 0xE2, 0xC1, 0x44, 0xED, 0x81, 0xF9, 0xDC, 0xC2, 0xD8, 0xE1,
0x94, 0x83, 0x5A, 0x0A, 0xB5, 0x02, 0x45, 0xC6, 0x95, 0xCD, 0x98, 0x35, 0x1D, 0x6A, 0x58, 0x88,
0x61, 0xE0, 0xAF, 0xFE, 0x05, 0x0F, 0x1E, 0x1C, 0xC8, 0x55, 0x3F, 0xE1, 0x23, 0xE3, 0x7E, 0xF4,
0x23, 0x3E, 0x3E, 0xAF, 0xF0, 0xF1, 0x79, 0x1D, 0x1F, 0xB4, 0xAA, 0x3C, 0x98, 0x0C, 0x80, 0xEC,
0x19, 0xE1, 0x64, 0x4C, 0x13, 0x58, 0xC0, 0x43, 0x50, 0x25, 0x7F, 0x8B, 0xB3, 0x84, 0xFE, 0x98,
0xB3, 0xDE, 0x84, 0x8D, 0xC4, 0x23, 0xFE, 0x8A, 0xD5, 0xFF, 0x82, 0x4B, 0x3C, 0x70, 0x3D, 0x97,
0x79, 0x6D, 0x5A, 0x49, 0x28, 0x3F, 0x7E, 0x2B, 0x91, 0x7E, 0xE4, 0x42, 0x78, 0xA9, 0x38, 0xC8,
0xDF, 0xB7, 0xF4, 0x00, 0xBC, 0x11, 0xF8, 0x29, 0x35, 0x75, 0xBC, 0x0B, 0xA5, 0xFC, 0x29, 0x30,
0x64, 0xA8, 0xC0, 0x47, 0xDD, 0xD9, 0xDC, 0x12, 0xAE, 0x01, 0x8A, 0xF1, 0xA3, 0x29, 0xB0, 0xEA,
0xC9, 0x02, 0xD7, 0x9E, 0x40, 0x26, 0x04, 0x91, 0xE0, 0x48, 0xC8, 0xA7, 0x8D, 0x2F, 0x07, 0x9B,
0x37, 0x35, 0xC8, 0x43, 0x2E, 0xFC, 0x98, 0x2E, 0x0C, 0x36, 0x6F, 0xFE, 0x6D, 0x36, 0xC6, 0xCC,
0x5A, 0x76, 0xA4, 0x96, 0x4C, 0xF6, 0xF4, 0x0B, 0xBF, 0x71, 0x09, 0x48, 0x5D, 0x49, 0x78, 0x45,
0x34, 0x03, 0x6B, 0x43, 0x61, 0xE1, 0x07, 0xFF, 0x47, 0x09, 0xF8, 0x91, 0x9E, 0x07, 0xCE, 0xBD,
0xE6, 0x3D, 0x5E, 0x2F, 0x3E, 0x85, 0xE9, 0x56, 0xE9, 0xC1, 0x4A, 0xC7, 0xEF, 0x53, 0x3A, 0x76,
0x59, 0xA2, 0x14, 0x4A, 0x14, 0x59, 0x88, 0x1A, 0x6A, 0x50, 0x0E, 0x51, 0x98, 0x89, 0x17, 0xCD,
0x81, 0x02, 0x9B, 0x73, 0x34, 0x5B, 0x3A, 0x02, 0x0F, 0xF4, 0xF5, 0x45, 0xEE, 0xFC, 0x74, 0x76,
0x7A, 0x22, 0x44, 0x7C, 0xA5, 0x62, 0x22, 0xD0, 0xAA, 0x2E, 0x2C, 0x2F, 0xCF, 0x9C, 0x89, 0xE4,
0xA1, 0x28, 0x75, 0x30, 0x31, 0x28, 0x87, 0xFE, 0x74, 0x31, 0xFC, 0x0A, 0x71, 0xD6, 0xD0, 0xCF,
0x52, 0x48, 0x58, 0x5B, 0x36, 0xA2, 0xF7, 0xFB, 0x97, 0xF6, 0xAE, 0xDD, 0x84, 0xBA, 0x00, 0xB4,
0x0A, 0x69, 0x19, 0xEE, 0x7D, 0xFE, 0xB7, 0x90, 0xB7, 0xFF, 0x1E, 0x32, 0x83, 0xA8, 0x95, 0x42,
0x58, 0x2A, 0xF0, 0xAB, 0xB8, 0x93, 0x24, 0x9A, 0x4A, 0xB4, 0xE3, 0x24, 0xC1, 0x4B, 0xE9, 0x43,
0x85, 0xA2, 0x0D, 0x61, 0x31, 0xA5, 0x89, 0xE6, 0x47, 0x34, 0xD5, 0x78, 0x24, 0xB4, 0x34, 0x8B,
0x63, 0x68, 0x5C, 0x56, 0xF4, 0x61, 0xEB, 0xC5, 0xEB, 0xCB, 0xFB, 0x8C, 0x66, 0xD4, 0xCF, 0x97,
0x69, 0x52, 0xD1, 0x0B, 0x56, 0x50, 0xDF, 0x10, 0xEE, 0x7E, 0xB9, 0xC9, 0xEB, 0xA9, 0x8C, 0x73,
0x8C, 0xA2, 0x1B, 0x2D, 0x35, 0x07, 0xE9, 0x26, 0x40, 0xD5, 0xE5, 0x59, 0x10, 0xCC, 0xDB, 0x2B,
0xB4, 0xA0, 0xF1, 0x8A, 0x44, 0x24, 0x9F, 0xCB, 0x67, 0x7F, 0xE4, 0xC9, 0xA9, 0xE2, 0x82, 0x50,
0xF2, 0x54, 0xA9, 0x36, 0xAD, 0x0D, 0x63, 0x83, 0x6A, 0x8C, 0xA7, 0x82, 0x70, 0x0F, 0xAF, 0x51,
0xE9, 0xC2, 0x2C, 0x6A, 0x29, 0xDC, 0xDE, 0x46, 0x5F, 0xCB, 0x6D, 0xE9, 0x89, 0x7C, 0x2A, 0x25,
0xE3, 0xAE, 0xAE, 0x63, 0x55, 0x45, 0xB1, 0x3E, 0x25, 0x61, 0x5A, 0x26, 0x5B, 0x54, 0x06, 0x26,
0x77, 0x0B, 0x70, 0x9B, 0x06, 0x29, 0x1C, 0xBD, 0x7E, 0x7F, 0xCE, 0x46, 0xD1, 0xCE, 0x11, 0x80,
0x69, 0xC5, 0x3E, 0x93, 0xD7, 0xE0, 0x24, 0xCC, 0x73, 0x07, 0x32, 0xE9, 0x4A, 0x03, 0x0E, 0xA9,
0x98, 0x44, 0xFE, 0x81, 0x7E, 0xA0, 0x3B, 0x3A, 0xFC, 0xBB, 0x09, 0x35, 0x47, 0xCD, 0xA5, 0xD0,
0xA4, 0xFA, 0x74, 0x70, 0xF5, 0x06, 0xC2, 0x53, 0x0C, 0xA5, 0x01, 0x17, 0x50, 0x34, 0xD7, 0x74,
0x7C, 0x7A, 0x7D, 0x0C, 0x29, 0xC8, 0x7F, 0x21, 0x37, 0x66, 0xBB, 0xAA, 0x6C, 0xB8, 0xF3, 0xEA,
0x75, 0x56, 0x2E, 0x03, 0x7A, 0x61, 0x8C, 0x58, 0x0F, 0x29, 0x7E, 0xFB, 0x7B, 0xF4, 0x9E, 0x8D,
0x15, 0xD2, 0x6A, 0x5D, 0x6F, 0xCE, 0x76, 0x90, 0x67, 0x89, 0xD5, 0x43, 0x2C, 0x70, 0x97, 0x1F,
0x29, 0x59, 0x95, 0x35, 0xDC, 0xF6, 0x48, 0x10, 0xE0, 0xC7, 0x5A, 0x03, 0x1B, 0x6A, 0x22, 0xB2,
0xD4, 0x42, 0x22, 0x29, 0x08, 0x90, 0xD2, 0x3E, 0x84, 0x39, 0xD3, 0x92, 0x65, 0x86, 0xB2, 0xA1,
0xBC, 0xFF, 0xC5, 0x9A, 0xA3, 0x64, 0x46, 0xE8, 0xCE, 0xF9, 0x6C, 0x73, 0x53, 0xD8, 0x85, 0x99,
0x18, 0x05, 0x52, 0x8A, 0x01, 0x1C, 0x9A, 0x7D, 0x68, 0x2D, 0x8C, 0xB2, 0x90, 0x58, 0xAB, 0x3D,
0xD2, 0xB6, 0x51, 0x55, 0x03, 0x54, 0x7C, 0x46, 0x01, 0x03, 0xCE, 0xB2, 0x24, 0x80, 0xA8, 0x8B,
0x39, 0xBA, 0xB2, 0x2D, 0xC5, 0xBA, 0xD0, 0x84, 0x0E, 0xEC, 0x67, 0xC8, 0x12, 0x95, 0x97, 0xAD,
0xA2, 0x27, 0x12, 0xC5, 0x77, 0x95, 0x9E, 0xC8, 0x6F, 0xE5, 0x84, 0xAA, 0xC8, 0x77, 0x88, 0x2F,
0x13, 0x5C, 0xD4, 0xD1, 0x13, 0xA0, 0x24, 0x83, 0x52, 0x34, 0x60, 0x2A, 0x2C, 0x37, 0xEE, 0xEB,
0xD3, 0xE9, 0xB4, 0x8E, 0xDF, 0x6A, 0xEB, 0x70, 0x82, 0xB2, 0x02, 0x5F, 0x5F, 0xC7, 0x21, 0x47,
0x15, 0x58, 0xF8, 0x6E, 0xE1, 0xAC, 0xBA, 0xE8, 0x42, 0x7F, 0x2B, 0xDE, 0xD4, 0xAA, 0xD2, 0x59,
0xE1, 0x73, 0x79, 0xDB, 0x7B, 0x3B, 0x2B, 0x20, 0x32, 0xC4, 0xAF, 0xB2, 0x90, 0x69, 0x20, 0x0D,
0x3B, 0xE5, 0x46, 0x56, 0x25, 0x85, 0x65, 0x5C, 0xB0, 0xE3, 0x2C, 0x9D, 0x18, 0x33, 0x60, 0xDD,
0x11, 0x96, 0xD2, 0x95, 0x43, 0x2D, 0x65, 0xB7, 0x0E, 0xB7, 0x0A, 0xFB, 0x70, 0x30, 0x83, 0x94,
0x79, 0xFB, 0xF3, 0x4F, 0x39, 0x5B, 0xDE, 0xF6, 0x92, 0x62, 0x71, 0xE1, 0xF3, 0xFC, 0xA9, 0x35,
0xAF, 0x69, 0xA5, 0xD1, 0xAF, 0xC4, 0x97, 0xBD, 0x46, 0xFE, 0x19, 0x3B, 0xFF, 0x9C, 0xAD, 0x81,
0xB1, 0x43, 0x23, 0x2A, 0xDC, 0x4C, 0x8C, 0xEA, 0x2F, 0x34, 0xE6, 0x63, 0x79, 0x29, 0xBF, 0x2D,
0xA0, 0x54, 0xA9, 0xD3, 0x68, 0x78, 0x3E, 0xFF, 0x9A, 0x42, 0x19, 0x1D, 0x65, 0xFE, 0x28, 0x20,
0x09, 0xC5, 0x82, 0xA3, 0x41, 0xBE, 0x92, 0xFB, 0x46, 0xC0, 0x86, 0x69, 0x03, 0x93, 0x6D, 0xCB,
0xDE, 0xB2, 0x77, 0x71, 0x64, 0x7F, 0x4D, 0xF7, 0x57, 0x4F, 0xD8, 0x5F, 0x34, 0x69, 0x58, 0x0B,
0xE7, 0xB5, 0xAB, 0x8A, 0x4D, 0x6A, 0x83, 0xFB, 0xC4, 0xA7, 0x70, 0x3D, 0x6F, 0xB3, 0xCC, 0xB6,
0x1A, 0xE4, 0x5F, 0x60, 0xD4, 0x31, 0xBA, 0x95, 0x2F, 0x92, 0xF4, 0x81, 0x7B, 0x18, 0x5B, 0x17,
0x54, 0x26, 0x70, 0x49, 0xD5, 0x87, 0x34, 0xB9, 0xD3, 0x9C, 0x2F, 0x39, 0xC3, 0xB7, 0x3C, 0xA8,
0x03, 0xE4, 0x37, 0x9C, 0x72, 0x39, 0xB0, 0xBF, 0x07, 0x5D, 0x33, 0x2A, 0x41, 0x79, 0xB1, 0x26,
0x9B, 0xE6, 0x7C, 0x02, 0x82, 0x01, 0x70, 0xB1, 0xA3, 0x48, 0xCD, 0x2B, 0xCB, 0x98, 0x9B, 0x57,
0x96, 0x54, 0xE2, 0x5F, 0x59, 0xCC, 0xDB, 0x9F, 0xFC, 0xDB, 0x4C, 0xF9, 0x7F, 0x5B, 0x28, 0x36,
0x32, 0xF9, 0xE1, 0x09, 0xF7, 0x56, 0x3F, 0x45, 0xAD, 0x47, 0x51, 0xBB, 0xF7, 0xFF, 0x17, 0x53,
0xE8, 0x9D, 0x36, 0x92, 0x29, 0x00, 0x00
};
#define SPIFFS_MAXLENGTH_FILEPATH 32
const char *excludeListFile = "/.exclude.files";
typedef struct ExcludeListS {
char *item;
ExcludeListS *next;
} ExcludeList;
static ExcludeList *excludes = NULL;
static bool matchWild(const char *pattern, const char *testee) {
const char *nxPat = NULL, *nxTst = NULL;
while (*testee) {
if (( *pattern == '?' ) || (*pattern == *testee)){
pattern++;testee++;
continue;
}
if (*pattern=='*'){
nxPat=pattern++; nxTst=testee;
continue;
}
if (nxPat){
pattern = nxPat+1; testee=++nxTst;
continue;
}
return false;
}
while (*pattern=='*'){pattern++;}
return (*pattern == 0);
}
static bool addExclude(const char *item){
size_t len = strlen(item);
if(!len){
return false;
}
ExcludeList *e = (ExcludeList *)malloc(sizeof(ExcludeList));
if(!e){
return false;
}
e->item = (char *)malloc(len+1);
if(!e->item){
free(e);
return false;
}
memcpy(e->item, item, len+1);
e->next = excludes;
excludes = e;
return true;
}
static void loadExcludeList(fs::FS &_fs, const char *filename){
static char linebuf[SPIFFS_MAXLENGTH_FILEPATH];
fs::File excludeFile=_fs.open(filename, "r");
if(!excludeFile){
//addExclude("/*.js.gz");
return;
}
#ifdef ESP32
if(excludeFile.isDirectory()){
excludeFile.close();
return;
}
#endif
if (excludeFile.size() > 0){
uint8_t idx;
bool isOverflowed = false;
while (excludeFile.available()){
linebuf[0] = '\0';
idx = 0;
int lastChar;
do {
lastChar = excludeFile.read();
if(lastChar != '\r'){
linebuf[idx++] = (char) lastChar;
}
} while ((lastChar >= 0) && (lastChar != '\n') && (idx < SPIFFS_MAXLENGTH_FILEPATH));
if(isOverflowed){
isOverflowed = (lastChar != '\n');
continue;
}
isOverflowed = (idx >= SPIFFS_MAXLENGTH_FILEPATH);
linebuf[idx-1] = '\0';
if(!addExclude(linebuf)){
excludeFile.close();
return;
}
}
}
excludeFile.close();
}
static bool isExcluded(fs::FS &_fs, const char *filename) {
if(excludes == NULL){
loadExcludeList(_fs, excludeListFile);
}
ExcludeList *e = excludes;
while(e){
if (matchWild(e->item, filename)){
return true;
}
e = e->next;
}
return false;
}
// WEB HANDLER IMPLEMENTATION
#ifdef ESP32
SPIFFSEditor::SPIFFSEditor(const fs::FS& fs, const String& username, const String& password)
#else
SPIFFSEditor::SPIFFSEditor(const String& username, const String& password, const fs::FS& fs)
#endif
:_fs(fs)
,_username(username)
,_password(password)
,_authenticated(false)
,_startTime(0)
{}
bool SPIFFSEditor::canHandle(AsyncWebServerRequest *request){
if(request->url().equalsIgnoreCase("/edit")){
if(request->method() == HTTP_GET){
if(request->hasParam("list"))
return true;
if(request->hasParam("edit")){
request->_tempFile = _fs.open(request->arg("edit"), "r");
if(!request->_tempFile){
return false;
}
#ifdef ESP32
if(request->_tempFile.isDirectory()){
request->_tempFile.close();
return false;
}
#endif
}
if(request->hasParam("download")){
request->_tempFile = _fs.open(request->arg("download"), "r");
if(!request->_tempFile){
return false;
}
#ifdef ESP32
if(request->_tempFile.isDirectory()){
request->_tempFile.close();
return false;
}
#endif
}
request->addInterestingHeader("If-Modified-Since");
return true;
}
else if(request->method() == HTTP_POST)
return true;
else if(request->method() == HTTP_DELETE)
return true;
else if(request->method() == HTTP_PUT)
return true;
}
return false;
}
void SPIFFSEditor::handleRequest(AsyncWebServerRequest *request){
if(_username.length() && _password.length() && !request->authenticate(_username.c_str(), _password.c_str()))
return request->requestAuthentication();
if(request->method() == HTTP_GET){
if(request->hasParam("list")){
String path = request->getParam("list")->value();
#ifdef ESP32
File dir = _fs.open(path);
#else
Dir dir = _fs.openDir(path);
#endif
path = String();
String output = "[";
#ifdef ESP32
File entry = dir.openNextFile();
while(entry){
#else
while(dir.next()){
fs::File entry = dir.openFile("r");
#endif
if (isExcluded(_fs, entry.name())) {
#ifdef ESP32
entry = dir.openNextFile();
#endif
continue;
}
if (output != "[") output += ',';
output += "{\"type\":\"";
output += "file";
output += "\",\"name\":\"";
output += String(entry.name());
output += "\",\"size\":";
output += String(entry.size());
output += "}";
#ifdef ESP32
entry = dir.openNextFile();
#else
entry.close();
#endif
}
#ifdef ESP32
dir.close();
#endif
output += "]";
request->send(200, "application/json", output);
output = String();
}
else if(request->hasParam("edit") || request->hasParam("download")){
request->send(request->_tempFile, request->_tempFile.name(), String(), request->hasParam("download"));
}
else {
const char * buildTime = __DATE__ " " __TIME__ " GMT";
if (request->header("If-Modified-Since").equals(buildTime)) {
request->send(304);
} else {
AsyncWebServerResponse *response = request->beginResponse_P(200, "text/html", edit_htm_gz, edit_htm_gz_len);
response->addHeader("Content-Encoding", "gzip");
response->addHeader("Last-Modified", buildTime);
request->send(response);
}
}
} else if(request->method() == HTTP_DELETE){
if(request->hasParam("path", true)){
_fs.remove(request->getParam("path", true)->value());
request->send(200, "", "DELETE: "+request->getParam("path", true)->value());
} else
request->send(404);
} else if(request->method() == HTTP_POST){
if(request->hasParam("data", true, true) && _fs.exists(request->getParam("data", true, true)->value()))
request->send(200, "", "UPLOADED: "+request->getParam("data", true, true)->value());
else
request->send(500);
} else if(request->method() == HTTP_PUT){
if(request->hasParam("path", true)){
String filename = request->getParam("path", true)->value();
if(_fs.exists(filename)){
request->send(200);
} else {
fs::File f = _fs.open(filename, "w");
if(f){
f.write((uint8_t)0x00);
f.close();
request->send(200, "", "CREATE: "+filename);
} else {
request->send(500);
}
}
} else
request->send(400);
}
}
void SPIFFSEditor::handleUpload(AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final){
if(!index){
if(!_username.length() || request->authenticate(_username.c_str(),_password.c_str())){
_authenticated = true;
request->_tempFile = _fs.open(filename, "w");
_startTime = millis();
}
}
if(_authenticated && request->_tempFile){
if(len){
request->_tempFile.write(data,len);
}
if(final){
request->_tempFile.close();
}
}
}

24
Software/lib/ESP Async WebServer/src/SPIFFSEditor.h
View File

@@ -1,24 +0,0 @@
#ifndef SPIFFSEditor_H_
#define SPIFFSEditor_H_
#include <ESPAsyncWebServer.h>
class SPIFFSEditor: public AsyncWebHandler {
private:
fs::FS _fs;
String _username;
String _password;
bool _authenticated;
uint32_t _startTime;
public:
#ifdef ESP32
SPIFFSEditor(const fs::FS& fs, const String& username=String(), const String& password=String());
#else
SPIFFSEditor(const String& username=String(), const String& password=String(), const fs::FS& fs=SPIFFS);
#endif
virtual bool canHandle(AsyncWebServerRequest *request) override final;
virtual void handleRequest(AsyncWebServerRequest *request) override final;
virtual void handleUpload(AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) override final;
virtual bool isRequestHandlerTrivial() override final {return false;}
};
#endif

193
Software/lib/ESP Async WebServer/src/StringArray.h
View File

@@ -1,193 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This file is part of the esp8266 core for Arduino environment.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef STRINGARRAY_H_
#define STRINGARRAY_H_
#include "stddef.h"
#include "WString.h"
template <typename T>
class LinkedListNode {
T _value;
public:
LinkedListNode<T>* next;
LinkedListNode(const T val): _value(val), next(nullptr) {}
~LinkedListNode(){}
const T& value() const { return _value; };
T& value(){ return _value; }
};
template <typename T, template<typename> class Item = LinkedListNode>
class LinkedList {
public:
typedef Item<T> ItemType;
typedef std::function<void(const T&)> OnRemove;
typedef std::function<bool(const T&)> Predicate;
private:
ItemType* _root;
OnRemove _onRemove;
class Iterator {
ItemType* _node;
public:
Iterator(ItemType* current = nullptr) : _node(current) {}
Iterator(const Iterator& i) : _node(i._node) {}
Iterator& operator ++() { _node = _node->next; return *this; }
bool operator != (const Iterator& i) const { return _node != i._node; }
const T& operator * () const { return _node->value(); }
const T* operator -> () const { return &_node->value(); }
};
public:
typedef const Iterator ConstIterator;
ConstIterator begin() const { return ConstIterator(_root); }
ConstIterator end() const { return ConstIterator(nullptr); }
LinkedList(OnRemove onRemove) : _root(nullptr), _onRemove(onRemove) {}
~LinkedList(){}
void add(const T& t){
auto it = new ItemType(t);
if(!_root){
_root = it;
} else {
auto i = _root;
while(i->next) i = i->next;
i->next = it;
}
}
T& front() const {
return _root->value();
}
bool isEmpty() const {
return _root == nullptr;
}
size_t length() const {
size_t i = 0;
auto it = _root;
while(it){
i++;
it = it->next;
}
return i;
}
size_t count_if(Predicate predicate) const {
size_t i = 0;
auto it = _root;
while(it){
if (!predicate){
i++;
}
else if (predicate(it->value())) {
i++;
}
it = it->next;
}
return i;
}
const T* nth(size_t N) const {
size_t i = 0;
auto it = _root;
while(it){
if(i++ == N)
return &(it->value());
it = it->next;
}
return nullptr;
}
bool remove(const T& t){
auto it = _root;
auto pit = _root;
while(it){
if(it->value() == t){
if(it == _root){
_root = _root->next;
} else {
pit->next = it->next;
}
if (_onRemove) {
_onRemove(it->value());
}
delete it;
return true;
}
pit = it;
it = it->next;
}
return false;
}
bool remove_first(Predicate predicate){
auto it = _root;
auto pit = _root;
while(it){
if(predicate(it->value())){
if(it == _root){
_root = _root->next;
} else {
pit->next = it->next;
}
if (_onRemove) {
_onRemove(it->value());
}
delete it;
return true;
}
pit = it;
it = it->next;
}
return false;
}
void free(){
while(_root != nullptr){
auto it = _root;
_root = _root->next;
if (_onRemove) {
_onRemove(it->value());
}
delete it;
}
_root = nullptr;
}
};
class StringArray : public LinkedList<String> {
public:
StringArray() : LinkedList(nullptr) {}
bool containsIgnoreCase(const String& str){
for (const auto& s : *this) {
if (str.equalsIgnoreCase(s)) {
return true;
}
}
return false;
}
};
#endif /* STRINGARRAY_H_ */

238
Software/lib/ESP Async WebServer/src/WebAuthentication.cpp
View File

@@ -1,238 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This file is part of the esp8266 core for Arduino environment.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "WebAuthentication.h"
#include <libb64/cencode.h>
#ifdef ESP32
#include "mbedtls/md5.h"
#else
#include "md5.h"
#endif
// Basic Auth hash = base64("username:password")
bool checkBasicAuthentication(const char * hash, const char * username, const char * password){
if(username == NULL || password == NULL || hash == NULL)
return false;
size_t toencodeLen = strlen(username)+strlen(password)+1;
size_t encodedLen = base64_encode_expected_len(toencodeLen);
if(strlen(hash) != encodedLen)
return false;
char *toencode = new char[toencodeLen+1];
if(toencode == NULL){
return false;
}
char *encoded = new char[base64_encode_expected_len(toencodeLen)+1];
if(encoded == NULL){
delete[] toencode;
return false;
}
sprintf(toencode, "%s:%s", username, password);
if(base64_encode_chars(toencode, toencodeLen, encoded) > 0 && memcmp(hash, encoded, encodedLen) == 0){
delete[] toencode;
delete[] encoded;
return true;
}
delete[] toencode;
delete[] encoded;
return false;
}
static bool getMD5(uint8_t * data, uint16_t len, char * output){//33 bytes or more
#ifdef ESP32
mbedtls_md5_context _ctx;
#else
md5_context_t _ctx;
#endif
uint8_t i;
uint8_t * _buf = (uint8_t*)malloc(16);
if(_buf == NULL)
return false;
memset(_buf, 0x00, 16);
#ifdef ESP32
mbedtls_md5_init(&_ctx);
mbedtls_md5_update_ret (&_ctx,data,len);
mbedtls_md5_finish_ret(&_ctx,data);
mbedtls_internal_md5_process( &_ctx ,data);
// mbedtls_md5_starts(&_ctx);
// mbedtls_md5_update(&_ctx, data, len);
// mbedtls_md5_finish(&_ctx, _buf);
#else
MD5Init(&_ctx);
MD5Update(&_ctx, data, len);
MD5Final(_buf, &_ctx);
#endif
for(i = 0; i < 16; i++) {
sprintf(output + (i * 2), "%02x", _buf[i]);
}
free(_buf);
return true;
}
static String genRandomMD5(){
#ifdef ESP8266
uint32_t r = RANDOM_REG32;
#else
uint32_t r = rand();
#endif
char * out = (char*)malloc(33);
if(out == NULL || !getMD5((uint8_t*)(&r), 4, out))
return "";
String res = String(out);
free(out);
return res;
}
static String stringMD5(const String& in){
char * out = (char*)malloc(33);
if(out == NULL || !getMD5((uint8_t*)(in.c_str()), in.length(), out))
return "";
String res = String(out);
free(out);
return res;
}
String generateDigestHash(const char * username, const char * password, const char * realm){
if(username == NULL || password == NULL || realm == NULL){
return "";
}
char * out = (char*)malloc(33);
String res = String(username);
res.concat(":");
res.concat(realm);
res.concat(":");
String in = res;
in.concat(password);
if(out == NULL || !getMD5((uint8_t*)(in.c_str()), in.length(), out))
return "";
res.concat(out);
free(out);
return res;
}
String requestDigestAuthentication(const char * realm){
String header = "realm=\"";
if(realm == NULL)
header.concat("asyncesp");
else
header.concat(realm);
header.concat( "\", qop=\"auth\", nonce=\"");
header.concat(genRandomMD5());
header.concat("\", opaque=\"");
header.concat(genRandomMD5());
header.concat("\"");
return header;
}
bool checkDigestAuthentication(const char * header, const char * method, const char * username, const char * password, const char * realm, bool passwordIsHash, const char * nonce, const char * opaque, const char * uri){
if(username == NULL || password == NULL || header == NULL || method == NULL){
//os_printf("AUTH FAIL: missing requred fields\n");
return false;
}
String myHeader = String(header);
int nextBreak = myHeader.indexOf(",");
if(nextBreak < 0){
//os_printf("AUTH FAIL: no variables\n");
return false;
}
String myUsername = String();
String myRealm = String();
String myNonce = String();
String myUri = String();
String myResponse = String();
String myQop = String();
String myNc = String();
String myCnonce = String();
myHeader += ", ";
do {
String avLine = myHeader.substring(0, nextBreak);
avLine.trim();
myHeader = myHeader.substring(nextBreak+1);
nextBreak = myHeader.indexOf(",");
int eqSign = avLine.indexOf("=");
if(eqSign < 0){
//os_printf("AUTH FAIL: no = sign\n");
return false;
}
String varName = avLine.substring(0, eqSign);
avLine = avLine.substring(eqSign + 1);
if(avLine.startsWith("\"")){
avLine = avLine.substring(1, avLine.length() - 1);
}
if(varName.equals("username")){
if(!avLine.equals(username)){
//os_printf("AUTH FAIL: username\n");
return false;
}
myUsername = avLine;
} else if(varName.equals("realm")){
if(realm != NULL && !avLine.equals(realm)){
//os_printf("AUTH FAIL: realm\n");
return false;
}
myRealm = avLine;
} else if(varName.equals("nonce")){
if(nonce != NULL && !avLine.equals(nonce)){
//os_printf("AUTH FAIL: nonce\n");
return false;
}
myNonce = avLine;
} else if(varName.equals("opaque")){
if(opaque != NULL && !avLine.equals(opaque)){
//os_printf("AUTH FAIL: opaque\n");
return false;
}
} else if(varName.equals("uri")){
if(uri != NULL && !avLine.equals(uri)){
//os_printf("AUTH FAIL: uri\n");
return false;
}
myUri = avLine;
} else if(varName.equals("response")){
myResponse = avLine;
} else if(varName.equals("qop")){
myQop = avLine;
} else if(varName.equals("nc")){
myNc = avLine;
} else if(varName.equals("cnonce")){
myCnonce = avLine;
}
} while(nextBreak > 0);
String ha1 = (passwordIsHash) ? String(password) : stringMD5(myUsername + ":" + myRealm + ":" + String(password));
String ha2 = String(method) + ":" + myUri;
String response = ha1 + ":" + myNonce + ":" + myNc + ":" + myCnonce + ":" + myQop + ":" + stringMD5(ha2);
if(myResponse.equals(stringMD5(response))){
//os_printf("AUTH SUCCESS\n");
return true;
}
//os_printf("AUTH FAIL: password\n");
return false;
}

34
Software/lib/ESP Async WebServer/src/WebAuthentication.h
View File

@@ -1,34 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This file is part of the esp8266 core for Arduino environment.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef WEB_AUTHENTICATION_H_
#define WEB_AUTHENTICATION_H_
#include "Arduino.h"
bool checkBasicAuthentication(const char * header, const char * username, const char * password);
String requestDigestAuthentication(const char * realm);
bool checkDigestAuthentication(const char * header, const char * method, const char * username, const char * password, const char * realm, bool passwordIsHash, const char * nonce, const char * opaque, const char * uri);
//for storing hashed versions on the device that can be authenticated against
String generateDigestHash(const char * username, const char * password, const char * realm);
#endif

133
Software/lib/ESP Async WebServer/src/WebHandlerImpl.h
View File

@@ -1,133 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This file is part of the esp8266 core for Arduino environment.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef ASYNCWEBSERVERHANDLERIMPL_H_
#define ASYNCWEBSERVERHANDLERIMPL_H_
#include <string>
#include <regex>
#include "stddef.h"
#include <time.h>
class AsyncStaticWebHandler: public AsyncWebHandler {
using File = fs::File;
using FS = fs::FS;
private:
bool _getFile(AsyncWebServerRequest *request);
bool _fileExists(AsyncWebServerRequest *request, const String& path);
uint8_t _countBits(const uint8_t value) const;
protected:
FS _fs;
String _uri;
String _path;
String _default_file;
String _cache_control;
String _last_modified;
AwsTemplateProcessor _callback;
bool _isDir;
bool _gzipFirst;
uint8_t _gzipStats;
public:
AsyncStaticWebHandler(const char* uri, FS& fs, const char* path, const char* cache_control);
virtual bool canHandle(AsyncWebServerRequest *request) override final;
virtual void handleRequest(AsyncWebServerRequest *request) override final;
AsyncStaticWebHandler& setIsDir(bool isDir);
AsyncStaticWebHandler& setDefaultFile(const char* filename);
AsyncStaticWebHandler& setCacheControl(const char* cache_control);
AsyncStaticWebHandler& setLastModified(const char* last_modified);
AsyncStaticWebHandler& setLastModified(struct tm* last_modified);
#ifdef ESP8266
AsyncStaticWebHandler& setLastModified(time_t last_modified);
AsyncStaticWebHandler& setLastModified(); //sets to current time. Make sure sntp is runing and time is updated
#endif
AsyncStaticWebHandler& setTemplateProcessor(AwsTemplateProcessor newCallback) {_callback = newCallback; return *this;}
};
class AsyncCallbackWebHandler: public AsyncWebHandler {
private:
protected:
String _uri;
WebRequestMethodComposite _method;
ArRequestHandlerFunction _onRequest;
ArUploadHandlerFunction _onUpload;
ArBodyHandlerFunction _onBody;
bool _isRegex;
public:
AsyncCallbackWebHandler() : _uri(), _method(HTTP_ANY), _onRequest(NULL), _onUpload(NULL), _onBody(NULL), _isRegex(false){}
void setUri(const String& uri){
_uri = uri;
_isRegex = uri.startsWith("^") && uri.endsWith("$");
}
void setMethod(WebRequestMethodComposite method){ _method = method; }
void onRequest(ArRequestHandlerFunction fn){ _onRequest = fn; }
void onUpload(ArUploadHandlerFunction fn){ _onUpload = fn; }
void onBody(ArBodyHandlerFunction fn){ _onBody = fn; }
virtual bool canHandle(AsyncWebServerRequest *request) override final{
if(!_onRequest)
return false;
if(!(_method & request->method()))
return false;
if (_isRegex) {
std::regex rgx(_uri.c_str());
std::smatch matches;
std::string s(request->url().c_str());
if(std::regex_search(s, matches, rgx)) {
for (size_t i = 1; i < matches.size(); ++i) { // start from 1
request->_addPathParam(matches[i].str().c_str());
}
} else {
return false;
}
} else if (_uri.length() && _uri.endsWith("*")) {
String uriTemplate = String(_uri);
uriTemplate = uriTemplate.substring(0, uriTemplate.length() - 1);
if (!request->url().startsWith(uriTemplate))
return false;
}
else if(_uri.length() && (_uri != request->url() && !request->url().startsWith(_uri+"/")))
return false;
request->addInterestingHeader("ANY");
return true;
}
virtual void handleRequest(AsyncWebServerRequest *request) override final {
if(_onRequest)
_onRequest(request);
else
request->send(500);
}
virtual void handleUpload(AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) override final {
if(_onUpload)
_onUpload(request, filename, index, data, len, final);
}
virtual void handleBody(AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total) override final {
if(_onBody)
_onBody(request, data, len, index, total);
}
virtual bool isRequestHandlerTrivial() override final {return _onRequest ? false : true;}
};
#endif /* ASYNCWEBSERVERHANDLERIMPL_H_ */

220
Software/lib/ESP Async WebServer/src/WebHandlers.cpp
View File

@@ -1,220 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This file is part of the esp8266 core for Arduino environment.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "ESPAsyncWebServer.h"
#include "WebHandlerImpl.h"
AsyncStaticWebHandler::AsyncStaticWebHandler(const char* uri, FS& fs, const char* path, const char* cache_control)
: _fs(fs), _uri(uri), _path(path), _default_file("index.htm"), _cache_control(cache_control), _last_modified(""), _callback(nullptr)
{
// Ensure leading '/'
if (_uri.length() == 0 || _uri[0] != '/') _uri = "/" + _uri;
if (_path.length() == 0 || _path[0] != '/') _path = "/" + _path;
// If path ends with '/' we assume a hint that this is a directory to improve performance.
// However - if it does not end with '/' we, can't assume a file, path can still be a directory.
_isDir = _path[_path.length()-1] == '/';
// Remove the trailing '/' so we can handle default file
// Notice that root will be "" not "/"
if (_uri[_uri.length()-1] == '/') _uri = _uri.substring(0, _uri.length()-1);
if (_path[_path.length()-1] == '/') _path = _path.substring(0, _path.length()-1);
// Reset stats
_gzipFirst = false;
_gzipStats = 0xF8;
}
AsyncStaticWebHandler& AsyncStaticWebHandler::setIsDir(bool isDir){
_isDir = isDir;
return *this;
}
AsyncStaticWebHandler& AsyncStaticWebHandler::setDefaultFile(const char* filename){
_default_file = String(filename);
return *this;
}
AsyncStaticWebHandler& AsyncStaticWebHandler::setCacheControl(const char* cache_control){
_cache_control = String(cache_control);
return *this;
}
AsyncStaticWebHandler& AsyncStaticWebHandler::setLastModified(const char* last_modified){
_last_modified = String(last_modified);
return *this;
}
AsyncStaticWebHandler& AsyncStaticWebHandler::setLastModified(struct tm* last_modified){
char result[30];
strftime (result,30,"%a, %d %b %Y %H:%M:%S %Z", last_modified);
return setLastModified((const char *)result);
}
#ifdef ESP8266
AsyncStaticWebHandler& AsyncStaticWebHandler::setLastModified(time_t last_modified){
return setLastModified((struct tm *)gmtime(&last_modified));
}
AsyncStaticWebHandler& AsyncStaticWebHandler::setLastModified(){
time_t last_modified;
if(time(&last_modified) == 0) //time is not yet set
return *this;
return setLastModified(last_modified);
}
#endif
bool AsyncStaticWebHandler::canHandle(AsyncWebServerRequest *request){
if(request->method() != HTTP_GET
|| !request->url().startsWith(_uri)
|| !request->isExpectedRequestedConnType(RCT_DEFAULT, RCT_HTTP)
){
return false;
}
if (_getFile(request)) {
// We interested in "If-Modified-Since" header to check if file was modified
if (_last_modified.length())
request->addInterestingHeader("If-Modified-Since");
if(_cache_control.length())
request->addInterestingHeader("If-None-Match");
DEBUGF("[AsyncStaticWebHandler::canHandle] TRUE\n");
return true;
}
return false;
}
bool AsyncStaticWebHandler::_getFile(AsyncWebServerRequest *request)
{
// Remove the found uri
String path = request->url().substring(_uri.length());
// We can skip the file check and look for default if request is to the root of a directory or that request path ends with '/'
bool canSkipFileCheck = (_isDir && path.length() == 0) || (path.length() && path[path.length()-1] == '/');
path = _path + path;
// Do we have a file or .gz file
if (!canSkipFileCheck && _fileExists(request, path))
return true;
// Can't handle if not default file
if (_default_file.length() == 0)
return false;
// Try to add default file, ensure there is a trailing '/' ot the path.
if (path.length() == 0 || path[path.length()-1] != '/')
path += "/";
path += _default_file;
return _fileExists(request, path);
}
#ifdef ESP32
#define FILE_IS_REAL(f) (f == true && !f.isDirectory())
#else
#define FILE_IS_REAL(f) (f == true)
#endif
bool AsyncStaticWebHandler::_fileExists(AsyncWebServerRequest *request, const String& path)
{
bool fileFound = false;
bool gzipFound = false;
String gzip = path + ".gz";
if (_gzipFirst) {
request->_tempFile = _fs.open(gzip, "r");
gzipFound = FILE_IS_REAL(request->_tempFile);
if (!gzipFound){
request->_tempFile = _fs.open(path, "r");
fileFound = FILE_IS_REAL(request->_tempFile);
}
} else {
request->_tempFile = _fs.open(path, "r");
fileFound = FILE_IS_REAL(request->_tempFile);
if (!fileFound){
request->_tempFile = _fs.open(gzip, "r");
gzipFound = FILE_IS_REAL(request->_tempFile);
}
}
bool found = fileFound || gzipFound;
if (found) {
// Extract the file name from the path and keep it in _tempObject
size_t pathLen = path.length();
char * _tempPath = (char*)malloc(pathLen+1);
snprintf(_tempPath, pathLen+1, "%s", path.c_str());
request->_tempObject = (void*)_tempPath;
// Calculate gzip statistic
_gzipStats = (_gzipStats << 1) + (gzipFound ? 1 : 0);
if (_gzipStats == 0x00) _gzipFirst = false; // All files are not gzip
else if (_gzipStats == 0xFF) _gzipFirst = true; // All files are gzip
else _gzipFirst = _countBits(_gzipStats) > 4; // IF we have more gzip files - try gzip first
}
return found;
}
uint8_t AsyncStaticWebHandler::_countBits(const uint8_t value) const
{
uint8_t w = value;
uint8_t n;
for (n=0; w!=0; n++) w&=w-1;
return n;
}
void AsyncStaticWebHandler::handleRequest(AsyncWebServerRequest *request)
{
// Get the filename from request->_tempObject and free it
String filename = String((char*)request->_tempObject);
free(request->_tempObject);
request->_tempObject = NULL;
if((_username != "" && _password != "") && !request->authenticate(_username.c_str(), _password.c_str()))
return request->requestAuthentication();
if (request->_tempFile == true) {
String etag = String(request->_tempFile.size());
if (_last_modified.length() && _last_modified == request->header("If-Modified-Since")) {
request->_tempFile.close();
request->send(304); // Not modified
} else if (_cache_control.length() && request->hasHeader("If-None-Match") && request->header("If-None-Match").equals(etag)) {
request->_tempFile.close();
AsyncWebServerResponse * response = new AsyncBasicResponse(304); // Not modified
response->addHeader("Cache-Control", _cache_control);
response->addHeader("ETag", etag);
request->send(response);
} else {
AsyncWebServerResponse * response = new AsyncFileResponse(request->_tempFile, filename, String(), false, _callback);
if (_last_modified.length())
response->addHeader("Last-Modified", _last_modified);
if (_cache_control.length()){
response->addHeader("Cache-Control", _cache_control);
response->addHeader("ETag", etag);
}
request->send(response);
}
} else {
request->send(404);
}
}

1009
Software/lib/ESP Async WebServer/src/WebRequest.cpp
View File

File diff suppressed because it is too large Load Diff

136
Software/lib/ESP Async WebServer/src/WebResponseImpl.h
View File

@@ -1,136 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This file is part of the esp8266 core for Arduino environment.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef ASYNCWEBSERVERRESPONSEIMPL_H_
#define ASYNCWEBSERVERRESPONSEIMPL_H_
#ifdef Arduino_h
// arduino is not compatible with std::vector
#undef min
#undef max
#endif
#include <vector>
// It is possible to restore these defines, but one can use _min and _max instead. Or std::min, std::max.
class AsyncBasicResponse: public AsyncWebServerResponse {
private:
String _content;
public:
AsyncBasicResponse(int code, const String& contentType=String(), const String& content=String());
void _respond(AsyncWebServerRequest *request);
size_t _ack(AsyncWebServerRequest *request, size_t len, uint32_t time);
bool _sourceValid() const { return true; }
};
class AsyncAbstractResponse: public AsyncWebServerResponse {
private:
String _head;
// Data is inserted into cache at begin().
// This is inefficient with vector, but if we use some other container,
// we won't be able to access it as contiguous array of bytes when reading from it,
// so by gaining performance in one place, we'll lose it in another.
std::vector<uint8_t> _cache;
size_t _readDataFromCacheOrContent(uint8_t* data, const size_t len);
size_t _fillBufferAndProcessTemplates(uint8_t* buf, size_t maxLen);
protected:
AwsTemplateProcessor _callback;
public:
AsyncAbstractResponse(AwsTemplateProcessor callback=nullptr);
void _respond(AsyncWebServerRequest *request);
size_t _ack(AsyncWebServerRequest *request, size_t len, uint32_t time);
bool _sourceValid() const { return false; }
virtual size_t _fillBuffer(uint8_t *buf __attribute__((unused)), size_t maxLen __attribute__((unused))) { return 0; }
};
#ifndef TEMPLATE_PLACEHOLDER
#define TEMPLATE_PLACEHOLDER '%'
#endif
#define TEMPLATE_PARAM_NAME_LENGTH 32
class AsyncFileResponse: public AsyncAbstractResponse {
using File = fs::File;
using FS = fs::FS;
private:
File _content;
String _path;
void _setContentType(const String& path);
public:
AsyncFileResponse(FS &fs, const String& path, const String& contentType=String(), bool download=false, AwsTemplateProcessor callback=nullptr);
AsyncFileResponse(File content, const String& path, const String& contentType=String(), bool download=false, AwsTemplateProcessor callback=nullptr);
~AsyncFileResponse();
bool _sourceValid() const { return !!(_content); }
virtual size_t _fillBuffer(uint8_t *buf, size_t maxLen) override;
};
class AsyncStreamResponse: public AsyncAbstractResponse {
private:
Stream *_content;
public:
AsyncStreamResponse(Stream &stream, const String& contentType, size_t len, AwsTemplateProcessor callback=nullptr);
bool _sourceValid() const { return !!(_content); }
virtual size_t _fillBuffer(uint8_t *buf, size_t maxLen) override;
};
class AsyncCallbackResponse: public AsyncAbstractResponse {
private:
AwsResponseFiller _content;
size_t _filledLength;
public:
AsyncCallbackResponse(const String& contentType, size_t len, AwsResponseFiller callback, AwsTemplateProcessor templateCallback=nullptr);
bool _sourceValid() const { return !!(_content); }
virtual size_t _fillBuffer(uint8_t *buf, size_t maxLen) override;
};
class AsyncChunkedResponse: public AsyncAbstractResponse {
private:
AwsResponseFiller _content;
size_t _filledLength;
public:
AsyncChunkedResponse(const String& contentType, AwsResponseFiller callback, AwsTemplateProcessor templateCallback=nullptr);
bool _sourceValid() const { return !!(_content); }
virtual size_t _fillBuffer(uint8_t *buf, size_t maxLen) override;
};
class AsyncProgmemResponse: public AsyncAbstractResponse {
private:
const uint8_t * _content;
size_t _readLength;
public:
AsyncProgmemResponse(int code, const String& contentType, const uint8_t * content, size_t len, AwsTemplateProcessor callback=nullptr);
bool _sourceValid() const { return true; }
virtual size_t _fillBuffer(uint8_t *buf, size_t maxLen) override;
};
class cbuf;
class AsyncResponseStream: public AsyncAbstractResponse, public Print {
private:
cbuf *_content;
public:
AsyncResponseStream(const String& contentType, size_t bufferSize);
~AsyncResponseStream();
bool _sourceValid() const { return (_state < RESPONSE_END); }
virtual size_t _fillBuffer(uint8_t *buf, size_t maxLen) override;
size_t write(const uint8_t *data, size_t len);
size_t write(uint8_t data);
using Print::write;
};
#endif /* ASYNCWEBSERVERRESPONSEIMPL_H_ */

697
Software/lib/ESP Async WebServer/src/WebResponses.cpp
View File

@@ -1,697 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This file is part of the esp8266 core for Arduino environment.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "ESPAsyncWebServer.h"
#include "WebResponseImpl.h"
#include "cbuf.h"
// Since ESP8266 does not link memchr by default, here's its implementation.
void* memchr(void* ptr, int ch, size_t count)
{
unsigned char* p = static_cast<unsigned char*>(ptr);
while(count--)
if(*p++ == static_cast<unsigned char>(ch))
return --p;
return nullptr;
}
/*
* Abstract Response
* */
const char* AsyncWebServerResponse::_responseCodeToString(int code) {
switch (code) {
case 100: return "Continue";
case 101: return "Switching Protocols";
case 200: return "OK";
case 201: return "Created";
case 202: return "Accepted";
case 203: return "Non-Authoritative Information";
case 204: return "No Content";
case 205: return "Reset Content";
case 206: return "Partial Content";
case 300: return "Multiple Choices";
case 301: return "Moved Permanently";
case 302: return "Found";
case 303: return "See Other";
case 304: return "Not Modified";
case 305: return "Use Proxy";
case 307: return "Temporary Redirect";
case 400: return "Bad Request";
case 401: return "Unauthorized";
case 402: return "Payment Required";
case 403: return "Forbidden";
case 404: return "Not Found";
case 405: return "Method Not Allowed";
case 406: return "Not Acceptable";
case 407: return "Proxy Authentication Required";
case 408: return "Request Time-out";
case 409: return "Conflict";
case 410: return "Gone";
case 411: return "Length Required";
case 412: return "Precondition Failed";
case 413: return "Request Entity Too Large";
case 414: return "Request-URI Too Large";
case 415: return "Unsupported Media Type";
case 416: return "Requested range not satisfiable";
case 417: return "Expectation Failed";
case 500: return "Internal Server Error";
case 501: return "Not Implemented";
case 502: return "Bad Gateway";
case 503: return "Service Unavailable";
case 504: return "Gateway Time-out";
case 505: return "HTTP Version not supported";
default: return "";
}
}
AsyncWebServerResponse::AsyncWebServerResponse()
: _code(0)
, _headers(LinkedList<AsyncWebHeader *>([](AsyncWebHeader *h){ delete h; }))
, _contentType()
, _contentLength(0)
, _sendContentLength(true)
, _chunked(false)
, _headLength(0)
, _sentLength(0)
, _ackedLength(0)
, _writtenLength(0)
, _state(RESPONSE_SETUP)
{
for(auto header: DefaultHeaders::Instance()) {
_headers.add(new AsyncWebHeader(header->name(), header->value()));
}
}
AsyncWebServerResponse::~AsyncWebServerResponse(){
_headers.free();
}
void AsyncWebServerResponse::setCode(int code){
if(_state == RESPONSE_SETUP)
_code = code;
}
void AsyncWebServerResponse::setContentLength(size_t len){
if(_state == RESPONSE_SETUP)
_contentLength = len;
}
void AsyncWebServerResponse::setContentType(const String& type){
if(_state == RESPONSE_SETUP)
_contentType = type;
}
void AsyncWebServerResponse::addHeader(const String& name, const String& value){
_headers.add(new AsyncWebHeader(name, value));
}
String AsyncWebServerResponse::_assembleHead(uint8_t version){
if(version){
addHeader("Accept-Ranges","none");
if(_chunked)
addHeader("Transfer-Encoding","chunked");
}
String out = String();
int bufSize = 300;
char buf[bufSize];
snprintf(buf, bufSize, "HTTP/1.%d %d %s\r\n", version, _code, _responseCodeToString(_code));
out.concat(buf);
if(_sendContentLength) {
snprintf(buf, bufSize, "Content-Length: %d\r\n", _contentLength);
out.concat(buf);
}
if(_contentType.length()) {
snprintf(buf, bufSize, "Content-Type: %s\r\n", _contentType.c_str());
out.concat(buf);
}
for(const auto& header: _headers){
snprintf(buf, bufSize, "%s: %s\r\n", header->name().c_str(), header->value().c_str());
out.concat(buf);
}
_headers.free();
out.concat("\r\n");
_headLength = out.length();
return out;
}
bool AsyncWebServerResponse::_started() const { return _state > RESPONSE_SETUP; }
bool AsyncWebServerResponse::_finished() const { return _state > RESPONSE_WAIT_ACK; }
bool AsyncWebServerResponse::_failed() const { return _state == RESPONSE_FAILED; }
bool AsyncWebServerResponse::_sourceValid() const { return false; }
void AsyncWebServerResponse::_respond(AsyncWebServerRequest *request){ _state = RESPONSE_END; request->client()->close(); }
size_t AsyncWebServerResponse::_ack(AsyncWebServerRequest *request, size_t len, uint32_t time){ return 0; }
/*
* String/Code Response
* */
AsyncBasicResponse::AsyncBasicResponse(int code, const String& contentType, const String& content){
_code = code;
_content = content;
_contentType = contentType;
if(_content.length()){
_contentLength = _content.length();
if(!_contentType.length())
_contentType = "text/plain";
}
addHeader("Connection","close");
}
void AsyncBasicResponse::_respond(AsyncWebServerRequest *request){
_state = RESPONSE_HEADERS;
String out = _assembleHead(request->version());
size_t outLen = out.length();
size_t space = request->client()->space();
if(!_contentLength && space >= outLen){
_writtenLength += request->client()->write(out.c_str(), outLen);
_state = RESPONSE_WAIT_ACK;
} else if(_contentLength && space >= outLen + _contentLength){
out += _content;
outLen += _contentLength;
_writtenLength += request->client()->write(out.c_str(), outLen);
_state = RESPONSE_WAIT_ACK;
} else if(space && space < outLen){
String partial = out.substring(0, space);
_content = out.substring(space) + _content;
_contentLength += outLen - space;
_writtenLength += request->client()->write(partial.c_str(), partial.length());
_state = RESPONSE_CONTENT;
} else if(space > outLen && space < (outLen + _contentLength)){
size_t shift = space - outLen;
outLen += shift;
_sentLength += shift;
out += _content.substring(0, shift);
_content = _content.substring(shift);
_writtenLength += request->client()->write(out.c_str(), outLen);
_state = RESPONSE_CONTENT;
} else {
_content = out + _content;
_contentLength += outLen;
_state = RESPONSE_CONTENT;
}
}
size_t AsyncBasicResponse::_ack(AsyncWebServerRequest *request, size_t len, uint32_t time){
_ackedLength += len;
if(_state == RESPONSE_CONTENT){
size_t available = _contentLength - _sentLength;
size_t space = request->client()->space();
//we can fit in this packet
if(space > available){
_writtenLength += request->client()->write(_content.c_str(), available);
_content = String();
_state = RESPONSE_WAIT_ACK;
return available;
}
//send some data, the rest on ack
String out = _content.substring(0, space);
_content = _content.substring(space);
_sentLength += space;
_writtenLength += request->client()->write(out.c_str(), space);
return space;
} else if(_state == RESPONSE_WAIT_ACK){
if(_ackedLength >= _writtenLength){
_state = RESPONSE_END;
}
}
return 0;
}
/*
* Abstract Response
* */
AsyncAbstractResponse::AsyncAbstractResponse(AwsTemplateProcessor callback): _callback(callback)
{
// In case of template processing, we're unable to determine real response size
if(callback) {
_contentLength = 0;
_sendContentLength = false;
_chunked = true;
}
}
void AsyncAbstractResponse::_respond(AsyncWebServerRequest *request){
addHeader("Connection","close");
_head = _assembleHead(request->version());
_state = RESPONSE_HEADERS;
_ack(request, 0, 0);
}
size_t AsyncAbstractResponse::_ack(AsyncWebServerRequest *request, size_t len, uint32_t time){
if(!_sourceValid()){
_state = RESPONSE_FAILED;
request->client()->close();
return 0;
}
_ackedLength += len;
size_t space = request->client()->space();
size_t headLen = _head.length();
if(_state == RESPONSE_HEADERS){
if(space >= headLen){
_state = RESPONSE_CONTENT;
space -= headLen;
} else {
String out = _head.substring(0, space);
_head = _head.substring(space);
_writtenLength += request->client()->write(out.c_str(), out.length());
return out.length();
}
}
if(_state == RESPONSE_CONTENT){
size_t outLen;
if(_chunked){
if(space <= 8){
return 0;
}
outLen = space;
} else if(!_sendContentLength){
outLen = space;
} else {
outLen = ((_contentLength - _sentLength) > space)?space:(_contentLength - _sentLength);
}
uint8_t *buf = (uint8_t *)malloc(outLen+headLen);
if (!buf) {
// os_printf("_ack malloc %d failed\n", outLen+headLen);
return 0;
}
if(headLen){
memcpy(buf, _head.c_str(), _head.length());
}
size_t readLen = 0;
if(_chunked){
// HTTP 1.1 allows leading zeros in chunk length. Or spaces may be added.
// See RFC2616 sections 2, 3.6.1.
readLen = _fillBufferAndProcessTemplates(buf+headLen+6, outLen - 8);
if(readLen == RESPONSE_TRY_AGAIN){
free(buf);
return 0;
}
outLen = sprintf((char*)buf+headLen, "%x", readLen) + headLen;
while(outLen < headLen + 4) buf[outLen++] = ' ';
buf[outLen++] = '\r';
buf[outLen++] = '\n';
outLen += readLen;
buf[outLen++] = '\r';
buf[outLen++] = '\n';
} else {
readLen = _fillBufferAndProcessTemplates(buf+headLen, outLen);
if(readLen == RESPONSE_TRY_AGAIN){
free(buf);
return 0;
}
outLen = readLen + headLen;
}
if(headLen){
_head = String();
}
if(outLen){
_writtenLength += request->client()->write((const char*)buf, outLen);
}
if(_chunked){
_sentLength += readLen;
} else {
_sentLength += outLen - headLen;
}
free(buf);
if((_chunked && readLen == 0) || (!_sendContentLength && outLen == 0) || (!_chunked && _sentLength == _contentLength)){
_state = RESPONSE_WAIT_ACK;
}
return outLen;
} else if(_state == RESPONSE_WAIT_ACK){
if(!_sendContentLength || _ackedLength >= _writtenLength){
_state = RESPONSE_END;
if(!_chunked && !_sendContentLength)
request->client()->close(true);
}
}
return 0;
}
size_t AsyncAbstractResponse::_readDataFromCacheOrContent(uint8_t* data, const size_t len)
{
// If we have something in cache, copy it to buffer
const size_t readFromCache = std::min(len, _cache.size());
if(readFromCache) {
memcpy(data, _cache.data(), readFromCache);
_cache.erase(_cache.begin(), _cache.begin() + readFromCache);
}
// If we need to read more...
const size_t needFromFile = len - readFromCache;
const size_t readFromContent = _fillBuffer(data + readFromCache, needFromFile);
return readFromCache + readFromContent;
}
size_t AsyncAbstractResponse::_fillBufferAndProcessTemplates(uint8_t* data, size_t len)
{
if(!_callback)
return _fillBuffer(data, len);
const size_t originalLen = len;
len = _readDataFromCacheOrContent(data, len);
// Now we've read 'len' bytes, either from cache or from file
// Search for template placeholders
uint8_t* pTemplateStart = data;
while((pTemplateStart < &data[len]) && (pTemplateStart = (uint8_t*)memchr(pTemplateStart, TEMPLATE_PLACEHOLDER, &data[len - 1] - pTemplateStart + 1))) { // data[0] ... data[len - 1]
uint8_t* pTemplateEnd = (pTemplateStart < &data[len - 1]) ? (uint8_t*)memchr(pTemplateStart + 1, TEMPLATE_PLACEHOLDER, &data[len - 1] - pTemplateStart) : nullptr;
// temporary buffer to hold parameter name
uint8_t buf[TEMPLATE_PARAM_NAME_LENGTH + 1];
String paramName;
// If closing placeholder is found:
if(pTemplateEnd) {
// prepare argument to callback
const size_t paramNameLength = std::min(sizeof(buf) - 1, (unsigned int)(pTemplateEnd - pTemplateStart - 1));
if(paramNameLength) {
memcpy(buf, pTemplateStart + 1, paramNameLength);
buf[paramNameLength] = 0;
paramName = String(reinterpret_cast<char*>(buf));
} else { // double percent sign encountered, this is single percent sign escaped.
// remove the 2nd percent sign
memmove(pTemplateEnd, pTemplateEnd + 1, &data[len] - pTemplateEnd - 1);
len += _readDataFromCacheOrContent(&data[len - 1], 1) - 1;
++pTemplateStart;
}
} else if(&data[len - 1] - pTemplateStart + 1 < TEMPLATE_PARAM_NAME_LENGTH + 2) { // closing placeholder not found, check if it's in the remaining file data
memcpy(buf, pTemplateStart + 1, &data[len - 1] - pTemplateStart);
const size_t readFromCacheOrContent = _readDataFromCacheOrContent(buf + (&data[len - 1] - pTemplateStart), TEMPLATE_PARAM_NAME_LENGTH + 2 - (&data[len - 1] - pTemplateStart + 1));
if(readFromCacheOrContent) {
pTemplateEnd = (uint8_t*)memchr(buf + (&data[len - 1] - pTemplateStart), TEMPLATE_PLACEHOLDER, readFromCacheOrContent);
if(pTemplateEnd) {
// prepare argument to callback
*pTemplateEnd = 0;
paramName = String(reinterpret_cast<char*>(buf));
// Copy remaining read-ahead data into cache
_cache.insert(_cache.begin(), pTemplateEnd + 1, buf + (&data[len - 1] - pTemplateStart) + readFromCacheOrContent);
pTemplateEnd = &data[len - 1];
}
else // closing placeholder not found in file data, store found percent symbol as is and advance to the next position
{
// but first, store read file data in cache
_cache.insert(_cache.begin(), buf + (&data[len - 1] - pTemplateStart), buf + (&data[len - 1] - pTemplateStart) + readFromCacheOrContent);
++pTemplateStart;
}
}
else // closing placeholder not found in content data, store found percent symbol as is and advance to the next position
++pTemplateStart;
}
else // closing placeholder not found in content data, store found percent symbol as is and advance to the next position
++pTemplateStart;
if(paramName.length()) {
// call callback and replace with result.
// Everything in range [pTemplateStart, pTemplateEnd] can be safely replaced with parameter value.
// Data after pTemplateEnd may need to be moved.
// The first byte of data after placeholder is located at pTemplateEnd + 1.
// It should be located at pTemplateStart + numBytesCopied (to begin right after inserted parameter value).
const String paramValue(_callback(paramName));
const char* pvstr = paramValue.c_str();
const unsigned int pvlen = paramValue.length();
const size_t numBytesCopied = std::min(pvlen, static_cast<unsigned int>(&data[originalLen - 1] - pTemplateStart + 1));
// make room for param value
// 1. move extra data to cache if parameter value is longer than placeholder AND if there is no room to store
if((pTemplateEnd + 1 < pTemplateStart + numBytesCopied) && (originalLen - (pTemplateStart + numBytesCopied - pTemplateEnd - 1) < len)) {
_cache.insert(_cache.begin(), &data[originalLen - (pTemplateStart + numBytesCopied - pTemplateEnd - 1)], &data[len]);
//2. parameter value is longer than placeholder text, push the data after placeholder which not saved into cache further to the end
memmove(pTemplateStart + numBytesCopied, pTemplateEnd + 1, &data[originalLen] - pTemplateStart - numBytesCopied);
len = originalLen; // fix issue with truncated data, not sure if it has any side effects
} else if(pTemplateEnd + 1 != pTemplateStart + numBytesCopied)
//2. Either parameter value is shorter than placeholder text OR there is enough free space in buffer to fit.
// Move the entire data after the placeholder
memmove(pTemplateStart + numBytesCopied, pTemplateEnd + 1, &data[len] - pTemplateEnd - 1);
// 3. replace placeholder with actual value
memcpy(pTemplateStart, pvstr, numBytesCopied);
// If result is longer than buffer, copy the remainder into cache (this could happen only if placeholder text itself did not fit entirely in buffer)
if(numBytesCopied < pvlen) {
_cache.insert(_cache.begin(), pvstr + numBytesCopied, pvstr + pvlen);
} else if(pTemplateStart + numBytesCopied < pTemplateEnd + 1) { // result is copied fully; if result is shorter than placeholder text...
// there is some free room, fill it from cache
const size_t roomFreed = pTemplateEnd + 1 - pTemplateStart - numBytesCopied;
const size_t totalFreeRoom = originalLen - len + roomFreed;
len += _readDataFromCacheOrContent(&data[len - roomFreed], totalFreeRoom) - roomFreed;
} else { // result is copied fully; it is longer than placeholder text
const size_t roomTaken = pTemplateStart + numBytesCopied - pTemplateEnd - 1;
len = std::min(len + roomTaken, originalLen);
}
}
} // while(pTemplateStart)
return len;
}
/*
* File Response
* */
AsyncFileResponse::~AsyncFileResponse(){
if(_content)
_content.close();
}
void AsyncFileResponse::_setContentType(const String& path){
if (path.endsWith(".html")) _contentType = "text/html";
else if (path.endsWith(".htm")) _contentType = "text/html";
else if (path.endsWith(".css")) _contentType = "text/css";
else if (path.endsWith(".json")) _contentType = "application/json";
else if (path.endsWith(".js")) _contentType = "application/javascript";
else if (path.endsWith(".png")) _contentType = "image/png";
else if (path.endsWith(".gif")) _contentType = "image/gif";
else if (path.endsWith(".jpg")) _contentType = "image/jpeg";
else if (path.endsWith(".ico")) _contentType = "image/x-icon";
else if (path.endsWith(".svg")) _contentType = "image/svg+xml";
else if (path.endsWith(".eot")) _contentType = "font/eot";
else if (path.endsWith(".woff")) _contentType = "font/woff";
else if (path.endsWith(".woff2")) _contentType = "font/woff2";
else if (path.endsWith(".ttf")) _contentType = "font/ttf";
else if (path.endsWith(".xml")) _contentType = "text/xml";
else if (path.endsWith(".pdf")) _contentType = "application/pdf";
else if (path.endsWith(".zip")) _contentType = "application/zip";
else if(path.endsWith(".gz")) _contentType = "application/x-gzip";
else _contentType = "text/plain";
}
AsyncFileResponse::AsyncFileResponse(FS &fs, const String& path, const String& contentType, bool download, AwsTemplateProcessor callback): AsyncAbstractResponse(callback){
_code = 200;
_path = path;
if(!download && !fs.exists(_path) && fs.exists(_path+".gz")){
_path = _path+".gz";
addHeader("Content-Encoding", "gzip");
_callback = nullptr; // Unable to process zipped templates
_sendContentLength = true;
_chunked = false;
}
_content = fs.open(_path, "r");
_contentLength = _content.size();
if(contentType == "")
_setContentType(path);
else
_contentType = contentType;
int filenameStart = path.lastIndexOf('/') + 1;
char buf[26+path.length()-filenameStart];
char* filename = (char*)path.c_str() + filenameStart;
if(download) {
// set filename and force download
snprintf(buf, sizeof (buf), "attachment; filename=\"%s\"", filename);
} else {
// set filename and force rendering
snprintf(buf, sizeof (buf), "inline; filename=\"%s\"", filename);
}
addHeader("Content-Disposition", buf);
}
AsyncFileResponse::AsyncFileResponse(File content, const String& path, const String& contentType, bool download, AwsTemplateProcessor callback): AsyncAbstractResponse(callback){
_code = 200;
_path = path;
if(!download && String(content.name()).endsWith(".gz") && !path.endsWith(".gz")){
addHeader("Content-Encoding", "gzip");
_callback = nullptr; // Unable to process gzipped templates
_sendContentLength = true;
_chunked = false;
}
_content = content;
_contentLength = _content.size();
if(contentType == "")
_setContentType(path);
else
_contentType = contentType;
int filenameStart = path.lastIndexOf('/') + 1;
char buf[26+path.length()-filenameStart];
char* filename = (char*)path.c_str() + filenameStart;
if(download) {
snprintf(buf, sizeof (buf), "attachment; filename=\"%s\"", filename);
} else {
snprintf(buf, sizeof (buf), "inline; filename=\"%s\"", filename);
}
addHeader("Content-Disposition", buf);
}
size_t AsyncFileResponse::_fillBuffer(uint8_t *data, size_t len){
return _content.read(data, len);
}
/*
* Stream Response
* */
AsyncStreamResponse::AsyncStreamResponse(Stream &stream, const String& contentType, size_t len, AwsTemplateProcessor callback): AsyncAbstractResponse(callback) {
_code = 200;
_content = &stream;
_contentLength = len;
_contentType = contentType;
}
size_t AsyncStreamResponse::_fillBuffer(uint8_t *data, size_t len){
size_t available = _content->available();
size_t outLen = (available > len)?len:available;
size_t i;
for(i=0;i<outLen;i++)
data[i] = _content->read();
return outLen;
}
/*
* Callback Response
* */
AsyncCallbackResponse::AsyncCallbackResponse(const String& contentType, size_t len, AwsResponseFiller callback, AwsTemplateProcessor templateCallback): AsyncAbstractResponse(templateCallback) {
_code = 200;
_content = callback;
_contentLength = len;
if(!len)
_sendContentLength = false;
_contentType = contentType;
_filledLength = 0;
}
size_t AsyncCallbackResponse::_fillBuffer(uint8_t *data, size_t len){
size_t ret = _content(data, len, _filledLength);
if(ret != RESPONSE_TRY_AGAIN){
_filledLength += ret;
}
return ret;
}
/*
* Chunked Response
* */
AsyncChunkedResponse::AsyncChunkedResponse(const String& contentType, AwsResponseFiller callback, AwsTemplateProcessor processorCallback): AsyncAbstractResponse(processorCallback) {
_code = 200;
_content = callback;
_contentLength = 0;
_contentType = contentType;
_sendContentLength = false;
_chunked = true;
_filledLength = 0;
}
size_t AsyncChunkedResponse::_fillBuffer(uint8_t *data, size_t len){
size_t ret = _content(data, len, _filledLength);
if(ret != RESPONSE_TRY_AGAIN){
_filledLength += ret;
}
return ret;
}
/*
* Progmem Response
* */
AsyncProgmemResponse::AsyncProgmemResponse(int code, const String& contentType, const uint8_t * content, size_t len, AwsTemplateProcessor callback): AsyncAbstractResponse(callback) {
_code = code;
_content = content;
_contentType = contentType;
_contentLength = len;
_readLength = 0;
}
size_t AsyncProgmemResponse::_fillBuffer(uint8_t *data, size_t len){
size_t left = _contentLength - _readLength;
if (left > len) {
memcpy_P(data, _content + _readLength, len);
_readLength += len;
return len;
}
memcpy_P(data, _content + _readLength, left);
_readLength += left;
return left;
}
/*
* Response Stream (You can print/write/printf to it, up to the contentLen bytes)
* */
AsyncResponseStream::AsyncResponseStream(const String& contentType, size_t bufferSize){
_code = 200;
_contentLength = 0;
_contentType = contentType;
_content = new cbuf(bufferSize);
}
AsyncResponseStream::~AsyncResponseStream(){
delete _content;
}
size_t AsyncResponseStream::_fillBuffer(uint8_t *buf, size_t maxLen){
return _content->read((char*)buf, maxLen);
}
size_t AsyncResponseStream::write(const uint8_t *data, size_t len){
if(_started())
return 0;
if(len > _content->room()){
size_t needed = len - _content->room();
_content->resizeAdd(needed);
}
size_t written = _content->write((const char*)data, len);
_contentLength += written;
return written;
}
size_t AsyncResponseStream::write(uint8_t data){
return write(&data, 1);
}

193
Software/lib/ESP Async WebServer/src/WebServer.cpp
View File

@@ -1,193 +0,0 @@
/*
Asynchronous WebServer library for Espressif MCUs
Copyright (c) 2016 Hristo Gochkov. All rights reserved.
This file is part of the esp8266 core for Arduino environment.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "ESPAsyncWebServer.h"
#include "WebHandlerImpl.h"
bool ON_STA_FILTER(AsyncWebServerRequest *request) {
return WiFi.localIP() == request->client()->localIP();
}
bool ON_AP_FILTER(AsyncWebServerRequest *request) {
return WiFi.localIP() != request->client()->localIP();
}
AsyncWebServer::AsyncWebServer(uint16_t port)
: _server(port)
, _rewrites(LinkedList<AsyncWebRewrite*>([](AsyncWebRewrite* r){ delete r; }))
, _handlers(LinkedList<AsyncWebHandler*>([](AsyncWebHandler* h){ delete h; }))
{
_catchAllHandler = new AsyncCallbackWebHandler();
if(_catchAllHandler == NULL)
return;
_server.onClient([](void *s, AsyncClient* c){
if(c == NULL)
return;
c->setRxTimeout(3);
AsyncWebServerRequest *r = new AsyncWebServerRequest((AsyncWebServer*)s, c);
if(r == NULL){
c->close(true);
c->free();
delete c;
}
}, this);
}
AsyncWebServer::~AsyncWebServer(){
reset();
end();
if(_catchAllHandler) delete _catchAllHandler;
}
AsyncWebRewrite& AsyncWebServer::addRewrite(AsyncWebRewrite* rewrite){
_rewrites.add(rewrite);
return *rewrite;
}
bool AsyncWebServer::removeRewrite(AsyncWebRewrite *rewrite){
return _rewrites.remove(rewrite);
}
AsyncWebRewrite& AsyncWebServer::rewrite(const char* from, const char* to){
return addRewrite(new AsyncWebRewrite(from, to));
}
AsyncWebHandler& AsyncWebServer::addHandler(AsyncWebHandler* handler){
_handlers.add(handler);
return *handler;
}
bool AsyncWebServer::removeHandler(AsyncWebHandler *handler){
return _handlers.remove(handler);
}
void AsyncWebServer::begin(){
_server.setNoDelay(true);
_server.begin();
}
void AsyncWebServer::end(){
_server.end();
}
#if ASYNC_TCP_SSL_ENABLED
void AsyncWebServer::onSslFileRequest(AcSSlFileHandler cb, void* arg){
_server.onSslFileRequest(cb, arg);
}
void AsyncWebServer::beginSecure(const char *cert, const char *key, const char *password){
_server.beginSecure(cert, key, password);
}
#endif
void AsyncWebServer::_handleDisconnect(AsyncWebServerRequest *request){
delete request;
}
void AsyncWebServer::_rewriteRequest(AsyncWebServerRequest *request){
for(const auto& r: _rewrites){
if (r->match(request)){
request->_url = r->toUrl();
request->_addGetParams(r->params());
}
}
}
void AsyncWebServer::_attachHandler(AsyncWebServerRequest *request){
for(const auto& h: _handlers){
if (h->filter(request) && h->canHandle(request)){
request->setHandler(h);
return;
}
}
request->addInterestingHeader("ANY");
request->setHandler(_catchAllHandler);
}
AsyncCallbackWebHandler& AsyncWebServer::on(const char* uri, WebRequestMethodComposite method, ArRequestHandlerFunction onRequest, ArUploadHandlerFunction onUpload, ArBodyHandlerFunction onBody){
AsyncCallbackWebHandler* handler = new AsyncCallbackWebHandler();
handler->setUri(uri);
handler->setMethod(method);
handler->onRequest(onRequest);
handler->onUpload(onUpload);
handler->onBody(onBody);
addHandler(handler);
return *handler;
}
AsyncCallbackWebHandler& AsyncWebServer::on(const char* uri, WebRequestMethodComposite method, ArRequestHandlerFunction onRequest, ArUploadHandlerFunction onUpload){
AsyncCallbackWebHandler* handler = new AsyncCallbackWebHandler();
handler->setUri(uri);
handler->setMethod(method);
handler->onRequest(onRequest);
handler->onUpload(onUpload);
addHandler(handler);
return *handler;
}
AsyncCallbackWebHandler& AsyncWebServer::on(const char* uri, WebRequestMethodComposite method, ArRequestHandlerFunction onRequest){
AsyncCallbackWebHandler* handler = new AsyncCallbackWebHandler();
handler->setUri(uri);
handler->setMethod(method);
handler->onRequest(onRequest);
addHandler(handler);
return *handler;
}
AsyncCallbackWebHandler& AsyncWebServer::on(const char* uri, ArRequestHandlerFunction onRequest){
AsyncCallbackWebHandler* handler = new AsyncCallbackWebHandler();
handler->setUri(uri);
handler->onRequest(onRequest);
addHandler(handler);
return *handler;
}
AsyncStaticWebHandler& AsyncWebServer::serveStatic(const char* uri, fs::FS& fs, const char* path, const char* cache_control){
AsyncStaticWebHandler* handler = new AsyncStaticWebHandler(uri, fs, path, cache_control);
addHandler(handler);
return *handler;
}
void AsyncWebServer::onNotFound(ArRequestHandlerFunction fn){
_catchAllHandler->onRequest(fn);
}
void AsyncWebServer::onFileUpload(ArUploadHandlerFunction fn){
_catchAllHandler->onUpload(fn);
}
void AsyncWebServer::onRequestBody(ArBodyHandlerFunction fn){
_catchAllHandler->onBody(fn);
}
void AsyncWebServer::reset(){
_rewrites.free();
_handlers.free();
if (_catchAllHandler != NULL){
_catchAllHandler->onRequest(NULL);
_catchAllHandler->onUpload(NULL);
_catchAllHandler->onBody(NULL);
}
}

627
Software/lib/ESP Async WebServer/src/edit.htm
View File

@@ -1,627 +0,0 @@
<!--This is the plain html source of the hex encoded Editor-Page embedded in SPIFFSEditor.cpp -->
<!DOCTYPE html>
<html lang="en">
<head>
<title>ESP Editor</title>
<style type="text/css" media="screen">
.cm {
z-index: 300;
position: absolute;
left: 5px;
border: 1px solid #444;
background-color: #F5F5F5;
display: none;
box-shadow: 0 0 10px rgba( 0, 0, 0, .4 );
font-size: 12px;
font-family: sans-serif;
font-weight:bold;
}
.cm ul {
list-style: none;
top: 0;
left: 0;
margin: 0;
padding: 0;
}
.cm li {
position: relative;
min-width: 60px;
cursor: pointer;
}
.cm span {
color: #444;
display: inline-block;
padding: 6px;
}
.cm li:hover { background: #444; }
.cm li:hover span { color: #EEE; }
.tvu ul, .tvu li {
padding: 0;
margin: 0;
list-style: none;
}
.tvu input {
position: absolute;
opacity: 0;
}
.tvu {
font: normal 12px Verdana, Arial, Sans-serif;
-moz-user-select: none;
-webkit-user-select: none;
user-select: none;
color: #444;
line-height: 16px;
}
.tvu span {
margin-bottom:5px;
padding: 0 0 0 18px;
cursor: pointer;
display: inline-block;
height: 16px;
vertical-align: middle;
background: url('data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAQAAAC1+jfqAAAABGdBTUEAAK/INwWK6QAAABl0RVh0U29mdHdhcmUAQWRvYmUgSW1hZ2VSZWFkeXHJZTwAAADoSURBVBgZBcExblNBGAbA2ceegTRBuIKOgiihSZNTcC5LUHAihNJR0kGKCDcYJY6D3/77MdOinTvzAgCw8ysThIvn/VojIyMjIyPP+bS1sUQIV2s95pBDDvmbP/mdkft83tpYguZq5Jh/OeaYh+yzy8hTHvNlaxNNczm+la9OTlar1UdA/+C2A4trRCnD3jS8BB1obq2Gk6GU6QbQAS4BUaYSQAf4bhhKKTFdAzrAOwAxEUAH+KEM01SY3gM6wBsEAQB0gJ+maZoC3gI6iPYaAIBJsiRmHU0AALOeFC3aK2cWAACUXe7+AwO0lc9eTHYTAAAAAElFTkSuQmCC') no-repeat;
background-position: 0px 0px;
}
.tvu span:hover {
text-decoration: underline;
}
@media screen and (-webkit-min-device-pixel-ratio:0){
.tvu{
-webkit-animation: webkit-adjacent-element-selector-bugfix infinite 1s;
}
@-webkit-keyframes webkit-adjacent-element-selector-bugfix {
from {
padding: 0;
}
to {
padding: 0;
}
}
}
#uploader {
position: absolute;
top: 0;
right: 0;
left: 0;
height:28px;
line-height: 24px;
padding-left: 10px;
background-color: #444;
color:#EEE;
}
#tree {
position: absolute;
top: 28px;
bottom: 0;
left: 0;
width:160px;
padding: 8px;
}
#editor, #preview {
position: absolute;
top: 28px;
right: 0;
bottom: 0;
left: 160px;
border-left:1px solid #EEE;
}
#preview {
background-color: #EEE;
padding:5px;
}
#loader {
position: absolute;
top: 36%;
right: 40%;
}
.loader {
z-index: 10000;
border: 8px solid #b5b5b5; /* Grey */
border-top: 8px solid #3498db; /* Blue */
border-bottom: 8px solid #3498db; /* Blue */
border-radius: 50%;
width: 240px;
height: 240px;
animation: spin 2s linear infinite;
display:none;
}
@keyframes spin {
0% { transform: rotate(0deg); }
100% { transform: rotate(360deg); }
}
</style>
<script>
if (typeof XMLHttpRequest === "undefined") {
XMLHttpRequest = function () {
try { return new ActiveXObject("Msxml2.XMLHTTP.6.0"); } catch (e) {}
try { return new ActiveXObject("Msxml2.XMLHTTP.3.0"); } catch (e) {}
try { return new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) {}
throw new Error("This browser does not support XMLHttpRequest.");
};
}
function ge(a){
return document.getElementById(a);
}
function ce(a){
return document.createElement(a);
}
function sortByKey(array, key) {
return array.sort(function(a, b) {
var x = a[key]; var y = b[key];
return ((x < y) ? -1 : ((x > y) ? 1 : 0));
});
}
var QueuedRequester = function () {
this.queue = [];
this.running = false;
this.xmlhttp = null;
}
QueuedRequester.prototype = {
_request: function(req){
this.running = true;
if(!req instanceof Object) return;
var that = this;
function ajaxCb(x,d){ return function(){
if (x.readyState == 4){
ge("loader").style.display = "none";
d.callback(x.status, x.responseText);
if(that.queue.length === 0) that.running = false;
if(that.running) that._request(that.queue.shift());
}
}}
ge("loader").style.display = "block";
var p = "";
if(req.params instanceof FormData){
p = req.params;
} else if(req.params instanceof Object){
for (var key in req.params) {
if(p === "")
p += (req.method === "GET")?"?":"";
else
p += "&";
p += encodeURIComponent(key)+"="+encodeURIComponent(req.params[key]);
};
}
this.xmlhttp = new XMLHttpRequest();
this.xmlhttp.onreadystatechange = ajaxCb(this.xmlhttp, req);
if(req.method === "GET"){
this.xmlhttp.open(req.method, req.url+p, true);
this.xmlhttp.send();
} else {
this.xmlhttp.open(req.method, req.url, true);
if(p instanceof String)
this.xmlhttp.setRequestHeader("Content-type", "application/x-www-form-urlencoded");
this.xmlhttp.send(p);
}
},
stop: function(){
if(this.running) this.running = false;
if(this.xmlhttp && this.xmlhttp.readyState < 4){
this.xmlhttp.abort();
}
},
add: function(method, url, params, callback){
this.queue.push({url:url,method:method,params:params,callback:callback});
if(!this.running){
this._request(this.queue.shift());
}
}
}
var requests = new QueuedRequester();
function createFileUploader(element, tree, editor){
var xmlHttp;
var refresh = ce("button");
refresh.innerHTML = 'Refresh List';
ge(element).appendChild(refresh);
var input = ce("input");
input.type = "file";
input.multiple = false;
input.name = "data";
input.id="upload-select";
ge(element).appendChild(input);
var path = ce("input");
path.id = "upload-path";
path.type = "text";
path.name = "path";
path.defaultValue = "/";
ge(element).appendChild(path);
var button = ce("button");
button.innerHTML = 'Upload';
ge(element).appendChild(button);
var mkfile = ce("button");
mkfile.innerHTML = 'Create';
ge(element).appendChild(mkfile);
var filename = ce("input");
filename.id = "editor-filename";
filename.type = "text";
filename.disabled= true;
filename.size = 20;
ge(element).appendChild(filename);
var savefile = ce("button");
savefile.innerHTML = ' Save ' ;
ge(element).appendChild(savefile);
function httpPostProcessRequest(status, responseText){
if(status != 200)
alert("ERROR["+status+"]: "+responseText);
else
tree.refreshPath(path.value);
}
function createPath(p){
var formData = new FormData();
formData.append("path", p);
requests.add("PUT", "/edit", formData, httpPostProcessRequest);
}
mkfile.onclick = function(e){
createPath(path.value);
editor.loadUrl(path.value);
path.value="/";
};
savefile.onclick = function(e){
editor.execCommand('saveCommand');
};
refresh.onclick = function(e){
tree.refreshPath(path.value);
};
button.onclick = function(e){
if(input.files.length === 0){
return;
}
var formData = new FormData();
formData.append("data", input.files[0], path.value);
requests.add("POST", "/edit", formData, httpPostProcessRequest);
var uploadPath= ge("upload-path");
uploadPath.value="/";
var uploadSelect= ge("upload-select");
uploadSelect.value="";
};
input.onchange = function(e){
if(input.files.length === 0) return;
var filename = input.files[0].name;
var ext = /(?:\.([^.]+))?$/.exec(filename)[1];
var name = /(.*)\.[^.]+$/.exec(filename)[1];
if(typeof name !== undefined){
filename = name;
}
path.value = "/"+filename+"."+ext;
};
}
function createTree(element, editor){
var preview = ge("preview");
var treeRoot = ce("div");
treeRoot.className = "tvu";
ge(element).appendChild(treeRoot);
function loadDownload(path){
ge('download-frame').src = "/edit?download="+path;
}
function loadPreview(path){
var edfname = ge("editor-filename");
edfname.value=path;
ge("editor").style.display = "none";
preview.style.display = "block";
preview.innerHTML = '<img src="/edit?edit='+path+'&_cb='+Date.now()+'" style="max-width:100%; max-height:100%; margin:auto; display:block;" />';
}
function fillFileMenu(el, path){
var list = ce("ul");
el.appendChild(list);
var action = ce("li");
list.appendChild(action);
if(isImageFile(path)){
action.innerHTML = "<span>Preview</span>";
action.onclick = function(e){
loadPreview(path);
if(document.body.getElementsByClassName('cm').length > 0) document.body.removeChild(el);
};
} else if(isTextFile(path)){
action.innerHTML = "<span>Edit</span>";
action.onclick = function(e){
editor.loadUrl(path);
if(document.body.getElementsByClassName('cm').length > 0) document.body.removeChild(el);
};
}
var download = ce("li");
list.appendChild(download);
download.innerHTML = "<span>Download</span>";
download.onclick = function(e){
loadDownload(path);
if(document.body.getElementsByClassName('cm').length > 0) document.body.removeChild(el);
};
var delFile = ce("li");
list.appendChild(delFile);
delFile.innerHTML = "<span>Delete</span>";
delFile.onclick = function(e){
httpDelete(path);
if(document.body.getElementsByClassName('cm').length > 0) document.body.removeChild(el);
};
}
function showContextMenu(event, path, isfile){
var divContext = ce("div");
var scrollTop = document.body.scrollTop ? document.body.scrollTop : document.documentElement.scrollTop;
var scrollLeft = document.body.scrollLeft ? document.body.scrollLeft : document.documentElement.scrollLeft;
var left = event.clientX + scrollLeft;
var top = event.clientY + scrollTop;
divContext.className = 'cm';
divContext.style.display = 'block';
divContext.style.left = left + 'px';
divContext.style.top = top + 'px';
fillFileMenu(divContext, path);
document.body.appendChild(divContext);
var width = divContext.offsetWidth;
var height = divContext.offsetHeight;
divContext.onmouseout = function(e){
if(e.clientX < left || e.clientX > (left + width) || e.clientY < top || e.clientY > (top + height)){
if(document.body.getElementsByClassName('cm').length > 0) document.body.removeChild(divContext);
}
};
}
function createTreeLeaf(path, name, size){
var leaf = ce("li");
leaf.id = name;
var label = ce("span");
label.innerHTML = name;
leaf.appendChild(label);
leaf.onclick = function(e){
if(isTextFile(leaf.id.toLowerCase())){
editor.loadUrl(leaf.id);
} else if(isImageFile(leaf.id.toLowerCase())){
loadPreview(leaf.id);
}
};
leaf.oncontextmenu = function(e){
e.preventDefault();
e.stopPropagation();
showContextMenu(e, leaf.id, true);
};
return leaf;
}
function addList(parent, path, items){
sortByKey(items, 'name');
var list = ce("ul");
parent.appendChild(list);
var ll = items.length;
for(var i = 0; i < ll; i++){
if(items[i].type === "file")
list.appendChild(createTreeLeaf(path, items[i].name, items[i].size));
}
}
function isTextFile(path){
var ext = /(?:\.([^.]+))?$/.exec(path)[1];
if(typeof ext !== undefined){
switch(ext){
case "txt":
case "htm":
case "html":
case "js":
case "css":
case "xml":
case "json":
case "conf":
case "ini":
case "h":
case "c":
case "cpp":
case "php":
case "hex":
case "ino":
case "pde":
return true;
}
}
return false;
}
function isImageFile(path){
var ext = /(?:\.([^.]+))?$/.exec(path)[1];
if(typeof ext !== undefined){
switch(ext){
case "png":
case "jpg":
case "gif":
case "bmp":
return true;
}
}
return false;
}
this.refreshPath = function(path){
treeRoot.removeChild(treeRoot.childNodes[0]);
httpGet(treeRoot, "/");
};
function delCb(path){
return function(status, responseText){
if(status != 200){
alert("ERROR["+status+"]: "+responseText);
} else {
treeRoot.removeChild(treeRoot.childNodes[0]);
httpGet(treeRoot, "/");
}
}
}
function httpDelete(filename){
var formData = new FormData();
formData.append("path", filename);
requests.add("DELETE", "/edit", formData, delCb(filename));
}
function getCb(parent, path){
return function(status, responseText){
if(status == 200)
addList(parent, path, JSON.parse(responseText));
}
}
function httpGet(parent, path){
requests.add("GET", "/edit", { list: path }, getCb(parent, path));
}
httpGet(treeRoot, "/");
return this;
}
function createEditor(element, file, lang, theme, type){
function getLangFromFilename(filename){
var lang = "plain";
var ext = /(?:\.([^.]+))?$/.exec(filename)[1];
if(typeof ext !== undefined){
switch(ext){
case "txt": lang = "plain"; break;
case "hex": lang = "plain"; break;
case "conf": lang = "plain"; break;
case "htm": lang = "html"; break;
case "js": lang = "javascript"; break;
case "h": lang = "c_cpp"; break;
case "c": lang = "c_cpp"; break;
case "cpp": lang = "c_cpp"; break;
case "css":
case "scss":
case "php":
case "html":
case "json":
case "xml":
case "ini": lang = ext;
}
}
return lang;
}
if(typeof file === "undefined") file = "/index.html";
if(typeof lang === "undefined"){
lang = getLangFromFilename(file);
}
if(typeof theme === "undefined") theme = "textmate";
if(typeof type === "undefined"){
type = "text/"+lang;
if(lang === "c_cpp") type = "text/plain";
}
var editor = ace.edit(element);
function httpPostProcessRequest(status, responseText){
if(status != 200) alert("ERROR["+status+"]: "+responseText);
}
function httpPost(filename, data, type){
var formData = new FormData();
formData.append("data", new Blob([data], { type: type }), filename);
requests.add("POST", "/edit", formData, httpPostProcessRequest);
}
function httpGetProcessRequest(status, responseText){
ge("preview").style.display = "none";
ge("editor").style.display = "block";
if(status == 200)
editor.setValue(responseText);
else
editor.setValue("");
editor.clearSelection();
}
function httpGet(theUrl){
requests.add("GET", "/edit", { edit: theUrl }, httpGetProcessRequest);
}
if(lang !== "plain") editor.getSession().setMode("ace/mode/"+lang);
editor.setTheme("ace/theme/"+theme);
editor.$blockScrolling = Infinity;
editor.getSession().setUseSoftTabs(true);
editor.getSession().setTabSize(2);
editor.setHighlightActiveLine(true);
editor.setShowPrintMargin(false);
editor.commands.addCommand({
name: 'saveCommand',
bindKey: {win: 'Ctrl-S', mac: 'Command-S'},
exec: function(editor) {
httpPost(file, editor.getValue()+"", type);
},
readOnly: false
});
editor.commands.addCommand({
name: 'undoCommand',
bindKey: {win: 'Ctrl-Z', mac: 'Command-Z'},
exec: function(editor) {
editor.getSession().getUndoManager().undo(false);
},
readOnly: false
});
editor.commands.addCommand({
name: 'redoCommand',
bindKey: {win: 'Ctrl-Shift-Z', mac: 'Command-Shift-Z'},
exec: function(editor) {
editor.getSession().getUndoManager().redo(false);
},
readOnly: false
});
editor.loadUrl = function(filename){
var edfname = ge("editor-filename");
edfname.value=filename;
file = filename;
lang = getLangFromFilename(file);
type = "text/"+lang;
if(lang !== "plain") editor.getSession().setMode("ace/mode/"+lang);
httpGet(file);
};
return editor;
}
function onBodyLoad(){
var vars = {};
var parts = window.location.href.replace(/[?&]+([^=&]+)=([^&]*)/gi, function(m,key,value) { vars[key] = value; });
var editor = createEditor("editor", vars.file, vars.lang, vars.theme);
var tree = createTree("tree", editor);
createFileUploader("uploader", tree, editor);
if(typeof vars.file === "undefined") vars.file = "/index.htm";
editor.loadUrl(vars.file);
};
</script>
<script id='ace' src="https://cdnjs.cloudflare.com/ajax/libs/ace/1.2.6/ace.js" type="text/javascript" charset="utf-8"></script>
<script>
if (typeof ace.edit == "undefined") {
var script = document.createElement('script');
script.src = "/ace.js";
script.async = false;
document.head.appendChild(script);
}
</script>
</head>
<body onload="onBodyLoad();">
<div id="loader" class="loader"></div>
<div id="uploader"></div>
<div id="tree"></div>
<div id="editor"></div>
<div id="preview" style="display:none;"></div>
<iframe id=download-frame style='display:none;'></iframe>
</body>
</html>

63
Software/platformio.ini
View File

@@ -1,63 +0,0 @@
; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[platformio]
extra_configs =
wifi_credentials.ini
[env:de-timer]
platform = espressif8266
framework = arduino
board = d1_mini
upload_protocol = esptool
upload_speed = 921600
;upload_port = 10.0.1.48
;upload_protocol = espota
;upload_flags =
; --auth=${wifi_cred.ota_password}
build_flags=
!python codegen/git_rev_macro.py
-DATOMIC_FS_UPDATE
-DFEATURE_ENABLE_WIFI_CLIENT
;-DFEATURE_ENABLE_LORA
-DFEATURE_ENABLE_UARTLORA
-DWIFI_AP_IP_GW=10,0,0,1
-DADMIN_PASSWORD=${wifi_cred.ota_password}
-DWIFI_CLIENT_SSID=${wifi_cred.wifi_client_ssid}
-DWIFI_CLIENT_PASSWORD=${wifi_cred.wifi_client_password}
-DWIFI_AP_SSID=${wifi_cred.wifi_ap_ssid}
-DWIFI_AP_PASSWORD=${wifi_cred.wifi_ap_password}
-DDEVICE_NAME='"Dark Emergency Timer"'
;build_type = debug
board_build.filesystem = littlefs
board_build.ldscript = eagle.flash.4m1m.ld
extra_scripts =
post:codegen/prepare_littlefs.py
pre:codegen/run_pre.py
monitor_filters = esp8266_exception_decoder
monitor_speed = 115200
lib_ldf_mode = deep
lib_deps =
;xreef/EByte LoRa E220 library@^1.0.6 ; made Lib local, due to changes for I2C-controller M0,M1-Pins
sstaub/Ticker@^4.4.0
robtillaart/PCF8574 @ ^0.3.7
adafruit/Adafruit INA219 @ ^1.1.1
akj7/TM1637 Driver @ ^2.1.2
sstaub/Ticker @ ^4.4.0
robtillaart/I2C_EEPROM @ ^1.8.2
esphome/ESPAsyncWebServer-esphome @ ^3.2.2
sandeepmistry/LoRa @ ^0.8.0
bblanchon/ArduinoJson @ ^7.0.4

Some files were not shown because too many files have changed in this diff Show More