added LoraUartCommand Interpreter

Hardware/#auto_saved_files#

@@ -1 +0,0 @@
-E:\Dark Emergency Timer\Hardware\DE-Timer\_autosave-DE-Timer.kicad_sch

Hardware/DE-Timer.kicad_pro

@@ -33,9 +33,9 @@
         "other_text_thickness": 0.15,
         "other_text_upright": false,
         "pads": {
-          "drill": 0.762,
+          "drill": 3.0,
-          "height": 1.524,
+          "height": 4.0,
-          "width": 1.524
+          "width": 4.0
         },
         "silk_line_width": 0.15,
         "silk_text_italic": false,
@@ -384,7 +384,7 @@
       "idf": "",
       "netlist": "",
       "specctra_dsn": "",
-      "step": "",
+      "step": "DE-Timer.step",
       "vrml": ""
     },
     "page_layout_descr_file": ""

Hardware/DE-Timer.kicad_sch

@@ -1601,6 +1601,13 @@
       (effects (font (size 1.27 1.27)) (justify right) hide)
     )
   )
+  (global_label "LoRa_M0" (shape input) (at 262.89 76.2 270) (fields_autoplaced)
+    (effects (font (size 1.27 1.27)) (justify right))
+    (uuid 72e274cf-d09b-40a2-b1e3-3b71338c2588)
+    (property "Intersheet References" "${INTERSHEET_REFS}" (id 0) (at 262.9694 86.8379 90)
+      (effects (font (size 1.27 1.27)) (justify right) hide)
+    )
+  )
   (global_label "BTN_FAC_2" (shape input) (at 199.39 121.92 0) (fields_autoplaced)
     (effects (font (size 1.27 1.27)) (justify left))
     (uuid 7a25f527-6714-4bf4-8e93-5473e8c7ec97)
@@ -1727,6 +1734,13 @@
       (effects (font (size 1.27 1.27)) (justify right) hide)
     )
   )
+  (global_label "LoRa_M1" (shape input) (at 256.54 76.2 270) (fields_autoplaced)
+    (effects (font (size 1.27 1.27)) (justify right))
+    (uuid eeff06ce-5dd6-48ad-98cf-4489d7624b9c)
+    (property "Intersheet References" "${INTERSHEET_REFS}" (id 0) (at 256.6194 86.8379 90)
+      (effects (font (size 1.27 1.27)) (justify right) hide)
+    )
+  )
   (global_label "LoRa_M1" (shape output) (at 234.95 125.73 180) (fields_autoplaced)
     (effects (font (size 1.27 1.27)) (justify right))
     (uuid f177e463-2a20-4337-808d-73eaa4f12d69)
@@ -1897,7 +1911,7 @@
     (property "Reference" "R6" (id 0) (at 212.598 44.5516 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
-    (property "Value" "R" (id 1) (at 212.598 46.863 0)
+    (property "Value" "4k7" (id 1) (at 212.598 46.863 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
     (property "Footprint" "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (id 2) (at 209.042 45.72 90)
@@ -1916,7 +1930,7 @@
     (property "Reference" "R7" (id 0) (at 217.678 44.5516 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
-    (property "Value" "R" (id 1) (at 217.678 46.863 0)
+    (property "Value" "4k7" (id 1) (at 217.678 46.863 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
     (property "Footprint" "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (id 2) (at 214.122 45.72 90)
@@ -2302,7 +2316,7 @@
     (uuid 00000000-0000-0000-0000-0000608139a0)
     (property "Reference" "U6" (id 0) (at 100.33 78.9432 0))
     (property "Value" "OKI-78SR-5_1.5-W36-C" (id 1) (at 100.33 81.2546 0))
-    (property "Footprint" "Converter_DCDC:Converter_DCDC_muRata_OKI-78SR_Vertical" (id 2) (at 101.6 91.44 0)
+    (property "Footprint" "Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT" (id 2) (at 101.6 91.44 0)
       (effects (font (size 1.27 1.27) italic) (justify left) hide)
     )
     (property "Datasheet" "https://power.murata.com/data/power/oki-78sr.pdf" (id 3) (at 100.33 85.09 0)
@@ -2396,6 +2410,25 @@
     (pin "9" (uuid 8020776e-90b2-4b88-a91b-d42c0c930bde))
   )
 
+  (symbol (lib_id "Device:R") (at 256.54 72.39 0) (unit 1)
+    (in_bom yes) (on_board yes)
+    (uuid 2bcb8eff-5353-49d7-940f-1af0870f1ac9)
+    (property "Reference" "R10" (id 0) (at 258.318 71.2216 0)
+      (effects (font (size 1.27 1.27)) (justify left))
+    )
+    (property "Value" "4k7" (id 1) (at 258.318 73.533 0)
+      (effects (font (size 1.27 1.27)) (justify left))
+    )
+    (property "Footprint" "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (id 2) (at 254.762 72.39 90)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "~" (id 3) (at 256.54 72.39 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid 6115d08d-ef27-4828-8c89-a6e903cffdaa))
+    (pin "2" (uuid e577afa2-1c52-4e68-895a-b4c7f4efbfd1))
+  )
+
   (symbol (lib_id "power:GND") (at 160.02 83.82 0) (unit 1)
     (in_bom yes) (on_board yes)
     (uuid 3608f094-4a83-4b12-a751-ce01f8af8f37)
@@ -2433,7 +2466,7 @@
   (symbol (lib_id "power:+3.3V") (at 243.84 68.58 0) (unit 1)
     (in_bom yes) (on_board yes)
     (uuid 40a343f4-2d59-4a27-ab4f-ae28f587fed5)
-    (property "Reference" "#PWR?" (id 0) (at 243.84 72.39 0)
+    (property "Reference" "#PWR02" (id 0) (at 243.84 72.39 0)
       (effects (font (size 1.27 1.27)) hide)
     )
     (property "Value" "+3.3V" (id 1) (at 244.221 64.1858 0))
@@ -2465,10 +2498,10 @@
   (symbol (lib_id "Device:R") (at 250.19 72.39 0) (unit 1)
     (in_bom yes) (on_board yes)
     (uuid 43fa7042-3495-4cdb-99c3-d2fae29fcc2e)
-    (property "Reference" "R?" (id 0) (at 251.968 71.2216 0)
+    (property "Reference" "R9" (id 0) (at 251.968 71.2216 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
-    (property "Value" "R" (id 1) (at 251.968 73.533 0)
+    (property "Value" "4k7" (id 1) (at 251.968 73.533 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
     (property "Footprint" "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (id 2) (at 248.412 72.39 90)
@@ -2566,7 +2599,7 @@
   (symbol (lib_id "power:+3.3V") (at 250.19 68.58 0) (unit 1)
     (in_bom yes) (on_board yes)
     (uuid 6c9e14ce-f378-409f-83b0-3017c42aa43a)
-    (property "Reference" "#PWR?" (id 0) (at 250.19 72.39 0)
+    (property "Reference" "#PWR03" (id 0) (at 250.19 72.39 0)
       (effects (font (size 1.27 1.27)) hide)
     )
     (property "Value" "+3.3V" (id 1) (at 250.571 64.1858 0))
@@ -2633,7 +2666,7 @@
     (property "Reference" "C2" (id 0) (at 142.621 76.3016 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
-    (property "Value" "C" (id 1) (at 142.621 78.613 0)
+    (property "Value" "100n" (id 1) (at 142.621 78.613 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
     (property "Footprint" "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (id 2) (at 140.6652 81.28 0)
@@ -2739,7 +2772,7 @@
   (symbol (lib_id "power:+3.3V") (at 237.49 68.58 0) (unit 1)
     (in_bom yes) (on_board yes)
     (uuid 9db85383-a03f-4209-a928-87be53d1e345)
-    (property "Reference" "#PWR?" (id 0) (at 237.49 72.39 0)
+    (property "Reference" "#PWR01" (id 0) (at 237.49 72.39 0)
       (effects (font (size 1.27 1.27)) hide)
     )
     (property "Value" "+3.3V" (id 1) (at 237.871 64.1858 0))
@@ -2780,10 +2813,10 @@
   (symbol (lib_id "Device:R") (at 243.84 72.39 0) (unit 1)
     (in_bom yes) (on_board yes)
     (uuid af841cc7-411b-4fa7-bf12-b2b6bf90990e)
-    (property "Reference" "R?" (id 0) (at 245.618 71.2216 0)
+    (property "Reference" "R8" (id 0) (at 245.618 71.2216 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
-    (property "Value" "R" (id 1) (at 245.618 73.533 0)
+    (property "Value" "4k7" (id 1) (at 245.618 73.533 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
     (property "Footprint" "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (id 2) (at 242.062 72.39 90)
@@ -2796,6 +2829,22 @@
     (pin "2" (uuid b71998a2-dc31-488e-96c8-f96d58289595))
   )
 
+  (symbol (lib_id "power:+3.3V") (at 262.89 68.58 0) (unit 1)
+    (in_bom yes) (on_board yes)
+    (uuid b2a70cb2-3ea0-4d7a-83e9-2996d0cf206b)
+    (property "Reference" "#PWR0131" (id 0) (at 262.89 72.39 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Value" "+3.3V" (id 1) (at 263.271 64.1858 0))
+    (property "Footprint" "" (id 2) (at 262.89 68.58 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "" (id 3) (at 262.89 68.58 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid a565fbe1-90b3-4bf4-85a9-0bf50a5110f2))
+  )
+
   (symbol (lib_id "power:GND") (at 139.7 81.28 0) (unit 1)
     (in_bom yes) (on_board yes)
     (uuid bb27d01d-6f95-44db-9098-a0b85d39315e)
@@ -2918,6 +2967,41 @@
     (pin "1" (uuid 1d18dbe4-48e7-470b-b33a-c9b54fb84aeb))
   )
 
+  (symbol (lib_id "power:+3.3V") (at 256.54 68.58 0) (unit 1)
+    (in_bom yes) (on_board yes)
+    (uuid f19e33ae-597f-4b9a-8f2d-c4d9c6bead68)
+    (property "Reference" "#PWR0130" (id 0) (at 256.54 72.39 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Value" "+3.3V" (id 1) (at 256.921 64.1858 0))
+    (property "Footprint" "" (id 2) (at 256.54 68.58 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "" (id 3) (at 256.54 68.58 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid f4708d09-7ba1-402c-9e48-47aea89c0016))
+  )
+
+  (symbol (lib_id "Device:R") (at 262.89 72.39 0) (unit 1)
+    (in_bom yes) (on_board yes)
+    (uuid f4ba32ab-ab3d-4753-a0b7-a2a898ba4b27)
+    (property "Reference" "R11" (id 0) (at 264.668 71.2216 0)
+      (effects (font (size 1.27 1.27)) (justify left))
+    )
+    (property "Value" "4k7" (id 1) (at 264.668 73.533 0)
+      (effects (font (size 1.27 1.27)) (justify left))
+    )
+    (property "Footprint" "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (id 2) (at 261.112 72.39 90)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "~" (id 3) (at 262.89 72.39 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid 4b77d0a4-5200-4718-ad55-d12fcc0160fd))
+    (pin "2" (uuid 970b75d2-be6a-4922-bf76-1e9d7e25dec5))
+  )
+
   (symbol (lib_id "Connector_Generic:Conn_01x04") (at 116.84 147.32 0) (unit 1)
     (in_bom yes) (on_board yes)
     (uuid f7c59d3b-150e-4fe4-9d7a-d8150b555fa0)
@@ -2942,10 +3026,10 @@
   (symbol (lib_id "Device:R") (at 237.49 72.39 0) (unit 1)
     (in_bom yes) (on_board yes)
     (uuid fe50da4c-5b14-4959-9cb1-4b2b431f31fd)
-    (property "Reference" "R?" (id 0) (at 239.268 71.2216 0)
+    (property "Reference" "R5" (id 0) (at 239.268 71.2216 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
-    (property "Value" "R" (id 1) (at 239.268 73.533 0)
+    (property "Value" "4k7" (id 1) (at 239.268 73.533 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
     (property "Footprint" "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (id 2) (at 235.712 72.39 90)
@@ -2963,6 +3047,15 @@
   )
 
   (symbol_instances
+    (path "/9db85383-a03f-4209-a928-87be53d1e345"
+      (reference "#PWR01") (unit 1) (value "+3.3V") (footprint "")
+    )
+    (path "/40a343f4-2d59-4a27-ab4f-ae28f587fed5"
+      (reference "#PWR02") (unit 1) (value "+3.3V") (footprint "")
+    )
+    (path "/6c9e14ce-f378-409f-83b0-3017c42aa43a"
+      (reference "#PWR03") (unit 1) (value "+3.3V") (footprint "")
+    )
     (path "/e450da72-98c3-4b02-bd53-9f12a50ec903"
       (reference "#PWR0101") (unit 1) (value "GND") (footprint "")
     )
@@ -3050,6 +3143,12 @@
     (path "/88bd6a1b-baf5-4675-82b2-2c94b1d8679e"
       (reference "#PWR0129") (unit 1) (value "GND") (footprint "")
     )
+    (path "/f19e33ae-597f-4b9a-8f2d-c4d9c6bead68"
+      (reference "#PWR0130") (unit 1) (value "+3.3V") (footprint "")
+    )
+    (path "/b2a70cb2-3ea0-4d7a-83e9-2996d0cf206b"
+      (reference "#PWR0131") (unit 1) (value "+3.3V") (footprint "")
+    )
     (path "/00000000-0000-0000-0000-0000606a3dab"
       (reference "#PWR0137") (unit 1) (value "+3.3V") (footprint "")
     )
@@ -3068,20 +3167,11 @@
     (path "/00000000-0000-0000-0000-0000608d2410"
       (reference "#PWR0151") (unit 1) (value "GND") (footprint "")
     )
-    (path "/40a343f4-2d59-4a27-ab4f-ae28f587fed5"
-      (reference "#PWR?") (unit 1) (value "+3.3V") (footprint "")
-    )
-    (path "/6c9e14ce-f378-409f-83b0-3017c42aa43a"
-      (reference "#PWR?") (unit 1) (value "+3.3V") (footprint "")
-    )
-    (path "/9db85383-a03f-4209-a928-87be53d1e345"
-      (reference "#PWR?") (unit 1) (value "+3.3V") (footprint "")
-    )
     (path "/00000000-0000-0000-0000-00006065cd79"
       (reference "C1") (unit 1) (value "NP") (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder")
     )
     (path "/79810dae-0a78-4064-835f-fd152b22a1ed"
-      (reference "C2") (unit 1) (value "C") (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder")
+      (reference "C2") (unit 1) (value "100n") (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder")
     )
     (path "/00000000-0000-0000-0000-00006065ba95"
       (reference "C3") (unit 1) (value "C") (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder")
@@ -3134,20 +3224,26 @@
     (path "/644e1842-7b7f-4923-bdec-dc0f5dc47467"
       (reference "R4") (unit 1) (value "0") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
     )
+    (path "/fe50da4c-5b14-4959-9cb1-4b2b431f31fd"
+      (reference "R5") (unit 1) (value "4k7") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+    )
     (path "/00000000-0000-0000-0000-000060644009"
-      (reference "R6") (unit 1) (value "R") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (reference "R6") (unit 1) (value "4k7") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
     )
     (path "/00000000-0000-0000-0000-000060644d37"
-      (reference "R7") (unit 1) (value "R") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (reference "R7") (unit 1) (value "4k7") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
-    )
-    (path "/43fa7042-3495-4cdb-99c3-d2fae29fcc2e"
-      (reference "R?") (unit 1) (value "R") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
     )
     (path "/af841cc7-411b-4fa7-bf12-b2b6bf90990e"
-      (reference "R?") (unit 1) (value "R") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (reference "R8") (unit 1) (value "4k7") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
     )
-    (path "/fe50da4c-5b14-4959-9cb1-4b2b431f31fd"
+    (path "/43fa7042-3495-4cdb-99c3-d2fae29fcc2e"
-      (reference "R?") (unit 1) (value "R") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+      (reference "R9") (unit 1) (value "4k7") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+    )
+    (path "/2bcb8eff-5353-49d7-940f-1af0870f1ac9"
+      (reference "R10") (unit 1) (value "4k7") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
+    )
+    (path "/f4ba32ab-ab3d-4753-a0b7-a2a898ba4b27"
+      (reference "R11") (unit 1) (value "4k7") (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder")
     )
     (path "/0dfd3030-be04-4d31-ab7a-5e9d80308efc"
       (reference "U1") (unit 1) (value "WeMos_D1_mini") (footprint "Module:WEMOS_D1_mini_light")
@@ -3165,7 +3261,7 @@
       (reference "U5") (unit 1) (value "PCF8574") (footprint "Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm")
     )
     (path "/00000000-0000-0000-0000-0000608139a0"
-      (reference "U6") (unit 1) (value "OKI-78SR-5_1.5-W36-C") (footprint "Converter_DCDC:Converter_DCDC_muRata_OKI-78SR_Vertical")
+      (reference "U6") (unit 1) (value "OKI-78SR-5_1.5-W36-C") (footprint "Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT")
     )
   )
 )

Software/data_src/index.htm

@@ -0,0 +1,566 @@
+<!DOCTYPE html>
+<html>
+
+<head>
+  <meta charset="utf-8" />
+  <title>%DEVICENAME%</title>
+  <meta name="viewport" content="width=device-width, initial-scale=1">
+  <link rel="stylesheet" href="static/css/bootstrap.min.css">
+  <link rel="stylesheet" href="static/css/custom.css">
+  <link rel="stylesheet" href="static/css/tweaks.css">
+  <script src="static/js/jquery.min.js"></script>
+  <script src="static/js/bootstrap.min.js"></script>
+  <script src="static/js/websocket.js"></script>
+  <link rel="apple-touch-icon" sizes="180x180" href="static/img/apple-touch-icon.png">
+  <link rel="icon" type="image/png" sizes="32x32" href="static/img/favicon-32x32.png">
+  <link rel="icon" type="image/png" sizes="16x16" href="static/img/favicon-16x16.png">
+  <link rel="manifest" href="static/img/site.webmanifest">
+</head>
+
+<body>
+
+  <nav class="navbar fixed-top navbar-dark bg-primary" id="navbar1">
+    <a class="navbar-brand" href="#">
+      <img src="static/img/logo.png" width="30" height="30" class="d-inline-block align-top mr-1" alt="">
+      %DEVICENAME%
+    </a>
+    <button class="navbar-toggler" type="button" data-toggle="collapse" data-target="#collapsingNavbar"
+      aria-controls="collapsingNavbar" aria-expanded="false" aria-label="Toggle navigation">
+      <span class="navbar-toggler-icon"></span>
+    </button>
+
+    <div class="collapse navbar-collapse" id="collapsingNavbar">
+      <ul class="navbar-nav nav mr-auto mt-2 mt-lg-0">
+
+        <li class="nav-item"><a class="nav-link active" role="tab" data-toggle="tab" href="#tab_home">Home</a></li>
+        <li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_maintenance">Wartung</a></li>
+        <li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_source">Einstellungen</a></li>
+        <li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_sysinfo">Systeminfo</a></li>
+        <li class="nav-item"><a class="nav-link" role="tab" data-toggle="tab" href="#tab_fwupdate">Update</a></li>
+
+      </ul>
+    </div>
+  </nav>
+
+  <main class="container">
+
+    <!-- Tabs Content -->
+    <div class="tab-content">
+      <!-- Div Tab Home-->
+      <div id="tab_home" class="tab-pane fade show active" role="tabpanel">
+        <div class="col text-center">
+          <div class="jumbotron">
+            <img src="static/img/logo.png" width="120" height="120" class="img-fluid" alt="">
+            <h3 class="pt-3">%DEVICENAME%</h3>
+          </div>
+        </div>
+        <!-- Div Group Battery remain -->
+        <hr />
+        <p>
+        <h4>Akku Ladestand</h4>
+        <div class="progress">
+          <div class="progress-bar text-light" role="progressbar" aria-valuenow="%BAT_REMAIN_CAPACITY%"
+            aria-valuemin="0" aria-valuemax="100" style="width: %BAT_REMAIN_CAPACITY%&#37;">
+            %BAT_REMAIN_CAPACITY%&#37;
+          </div>
+        </div>
+        </p>
+        <!-- Div Group Battery remain -->
+        <!-- Div Group current Mode -->
+        <hr />
+        <p>
+        <h4>aktueller Modus</h4>
+        <input class="form-control" type="text" placeholder="%SYSTEM_STATUS%" readonly>
+        </p>
+        <!-- Div Group current Mode -->
+        <!-- Div Group Faction Points -->
+        <hr />
+        <p>
+        <h4>aktueller Punktestand</h4>
+        <div class="container-fluid">
+          <div class="row">
+            <div class="col text-center %FACTION_1_ACTIVE% text-white p-3">%NAME_FAC_1%</div>
+            <div class="col text-center %FACTION_2_ACTIVE% text-white p-3">%NAME_FAC_2%</div>
+            <div class="col text-center %FACTION_3_ACTIVE% text-white p-3">%NAME_FAC_3%</div>
+          </div>
+          <div class="row">
+            <div class="col bg-dark text-white p-3"><img src="static/img/logo_fac1.png"
+                class="rounded mx-auto img-fluid d-block" alt="...">
+            </div>
+            <div class="col bg-dark text-white p-3"><img src="static/img/logo_fac2.png"
+                class="rounded mx-auto img-fluid d-block" alt="...">
+            </div>
+            <div class="col bg-dark text-white p-3"><img src="static/img/logo_fac3.png"
+                class="rounded mx-auto img-fluid d-block" alt="...">
+            </div>
+          </div>
+          <div class="row">
+            <div class="col text-center bg-secondary text-white p-3">%POINTS_FAC_1%</div>
+            <div class="col text-center bg-secondary text-white p-3">%POINTS_FAC_2%</div>
+            <div class="col text-center bg-secondary text-white p-3">%POINTS_FAC_3%</div>
+          </div>
+        </div>
+        </p>
+        <!-- Div GroupFaction Points -->
+        <!-- Div Group DTC Table -->
+        <div %SHOW_DTC_TABLE%>
+          <hr />
+          <p>
+          <h4>Fehlercodes</h4>
+          <table class="table">
+            <tbody>
+              <tr>
+                <th class="col-6" scope="col">Zeitstempel</th>
+                <th class="col-2" scope="col">Fehlercode</th>
+                <th class="col-2" scope="col">Schwere</th>
+                <th class="col-2" scope="col">Aktiv</th>
+              </tr>
+              %DTC_TABLE%
+            </tbody>
+          </table>
+          </p>
+        </div>
+        <!-- Div Group DTC Table -->
+      </div>
+      <!-- Div Tab Home-->
+
+      <!-- Div Tab Maintenance -->
+      <div id="tab_maintenance" class="tab-pane fade" role="tabpanel">
+        <h3>Wartung</h3>
+        <!-- Div Group Reset Timers -->
+        <hr />
+        <p>
+        <h4>Punkte zur&uuml;cksetzen</h4>
+        <form action="post.htm" method="POST" class="form-horizontal">
+          <div class="form-group row">
+            <div class="col text-center">
+              <button name="resetpoints" type="submit" class="btn btn-outline-primary">Reset</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <!-- Div Group Reset Timers  -->
+        <!-- Div Group EEPROM formatting -->
+        <hr />
+        <p>
+        <h4>EEPROM formatieren</h4>
+        <div class="alert alert-primary alert-dismissable show fade" role="alert">
+          <button type="button" class="close" data-dismiss="alert" aria-label="Close">
+            <span aria-hidden="true">×</span>
+          </button>
+          <strong>Achtung!</strong><br>
+          Das Formatieren der EEPROM-Bereiche sollte nur ausgeführt werden wenn es unbedingt erforderlich ist!
+          Hierdurch werden alle Einstellungen zurück gesetzt bzw. alle Betriebsdaten gehen verloren.
+          Folgende Situationen erfordern unter anderem eine Formatierung:
+          - Erstinitialisierung (bei neu aufgebautem Gerät)
+          - Firmware-Update (nur wenn es die Release-Notes fordern)
+        </div>
+        <form action="post.htm" method="POST" class="form-horizontal">
+          <div class="form-group row">
+            <div class="offset-4 col-8">
+              <div class="form-check">
+                <input class="form-check-input" type="checkbox" name="reset_ee_cfg" id="reset_ee_cfg">
+                <label class="form-check-label" for="reset_ee_cfg">
+                  Bereich "CFG"
+                </label>
+              </div>
+              <div class="form-check">
+                <input class="form-check-input" type="checkbox" name="reset_ee_pds" id="reset_ee_pds">
+                <label class="form-check-label" for="reset_ee_pds">
+                  Bereich "PDS"
+                </label>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <div class="col text-center">
+              <button name="reset_ee_btn" type="submit" class="btn btn-outline-primary">EEPROM formatieren</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <!-- Div Group EEPROM formatting -->
+        <!-- Div Group Device Reboot -->
+        <hr />
+        <p>
+        <h4>Ger&auml;t neustarten</h4>
+        <form action="post.htm" method="POST" class="form-horizontal">
+          <div class="form-group row">
+            <div class="col text-center">
+              <button name="reboot" type="submit" class="btn btn-outline-primary">Reboot</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <!-- Div Group Device Reboot -->
+      </div>
+      <!-- Div Tab Maintenance -->
+      <!-- Div Tab Settings-->
+      <div id="tab_source" class="tab-pane fade" role="tabpanel">
+        <h3>Einstellungen</h3>
+        <!-- Div Group Battery Type -->
+        <hr />
+        <p>
+        <form action="post.htm" method="POST" class="form-horizontal">
+          <h4>Akku-Variante</h4>
+          <div class="form-group row">
+            <label for="battery_select" class="control-label col-4">Akku</label>
+            <div class="col-8">
+              <select id="battery_select" name="battery_select" class="select form-control">
+                %BATTERY_SELECT_OPTIONS%
+              </select>
+            </div>
+          </div>
+          <h4>Timer-Einstellungen</h4>
+          <div class="form-group row">
+            <label for="factionreboot_cont" class="control-label col-4">active Faction Recovery</label>
+            <div class="col-8">
+              <div class="form-check">
+                <input class="form-check-input" type="checkbox" name="factionreboot_cont" id="factionreboot_cont"
+                  %FACTIONREBOOT_CHECKED%>
+                <label class="form-check-label" for="factionreboot_cont">
+                  aktive Faktion beim booten wiederherstellen ?
+                </label>
+              </div>
+            </div>
+          </div>
+          <h4>Faktionsbezeichnungen</h4>
+          <div class="alert alert-primary alert-dismissable show fade" role="alert">
+            <button type="button" class="close" data-dismiss="alert" aria-label="Close">
+              <span aria-hidden="true">×</span>
+            </button>
+            <strong>Achtung!</strong><br>
+            Faktionsbezeichnungen können nur aus ASCII-Zeichen bestehen, also A-Z, a-z und 0-9
+          </div>
+          <div class="form-group row">
+            <label for="faction_1_name" class="control-label col-4">Faktion 1</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="faction_1_name" name="faction_1_name" value="%NAME_FAC_1%" type="text" class="form-control" pattern="[A-Za-z0-9 _-]{1,32}">
+                <div class="input-group-append">
+                  <span class="input-group-text">max 32 Zeichen</span>
+                </div>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <label for="faction_2_name" class="control-label col-4">Faktion 2</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="faction_2_name" name="faction_2_name" value="%NAME_FAC_2%" type="text" class="form-control" pattern="[A-Za-z0-9 _-]{1,32}">
+                <div class="input-group-append">
+                  <span class="input-group-text">max 32 Zeichen</span>
+                </div>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <label for="faction_3_name" class="control-label col-4">Faktion 3</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="faction_3_name" name="faction_3_name" value="%NAME_FAC_3%" type="text" class="form-control" pattern="[A-Za-z0-9 _-]{1,32}">
+                <div class="input-group-append">
+                  <span class="input-group-text">max 32 Zeichen</span>
+                </div>
+              </div>
+            </div>
+          </div>
+          <div class="form-group row">
+            <div class="col text-center">
+              <button name="settingssave" type="submit" class="btn btn-outline-primary">&Uuml;bernehmen</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <!-- Div Group Battery Type -->
+      </div>
+      <!-- Div Tab Settings -->
+
+      <!-- Div Tab SystemInfo -->
+      <div id="tab_sysinfo" class="tab-pane fade" role="tabpanel">
+        <h3>Systeminfo</h3>
+        <!-- Div Group Sysinfo:Geraeteinfo -->
+        <hr />
+        <p>
+        <h4>Ger&auml;t</h4>
+        <table class="table">
+          <tbody>
+            <tr>
+              <th class="col-7" scope="col">Parameter</td>
+              <th class="col-5" scope="col">Value</td>
+            </tr>
+            <tr>
+              <td>Hostname</td>
+              <td>%HOSTNAME%</td>
+            </tr>
+            <tr>
+              <td>Device-ID</td>
+              <td>%DEVICENAME_ID%</td>
+            </tr>
+            <tr>
+              <td>Battery Voltage</td>
+              <td>%BAT_VOLTAGE%V</td>
+            </tr>
+            <tr>
+              <td>Battery Remain</td>
+              <td>%BAT_REMAIN_CAPACITY%&#37;</td>
+            </tr>
+        </table>
+        </p>
+        <!-- Div Group Sysinfo:Geraeteinfo -->
+        <!-- Div Group Sysinfo:Settings -->
+        <hr />
+        <p>
+        <h4>Einstellungen</h4>
+        <table class="table">
+          <tbody>
+            <tr>
+              <th class="col-7" scope="col">Parameter</td>
+              <th class="col-5" scope="col">Value</td>
+            </tr>
+            <tr>
+              <td>Battery_type</td>
+              <td>%BATTERY_TYPE%</td>
+            </tr>
+            <tr>
+              <td>Faction_recovery</td>
+              <td>%FACTION_RECOVERY%</td>
+            </tr>
+            <tr>
+              <td>EEPROM Version</td>
+              <td>%EEPROM_VERSION%</td>
+            </tr>
+            <tr>
+              <td>Checksum</td>
+              <td>%CONFIG_CHECKSUM%</td>
+            </tr>
+          </tbody>
+        </table>
+        </p>
+        <!-- Div Group Sysinfo:Settings -->
+        <!-- Div Group Sysinfo:Persistance -->
+        <hr />
+        <p>
+        <h4>Betriebsdaten</h4>
+        <table class="table">
+          <tbody>
+            <tr>
+              <th class="col-7" scope="col">Parameter</td>
+              <th class="col-5" scope="col">Value</td>
+            </tr>
+            <tr>
+              <td>writeCycleCounter</td>
+              <td>%WRITE_CYCLE_COUNT%</td>
+            </tr>
+            <tr>
+              <td>PersistenceMarker</td>
+              <td>%PERSISTENCE_MARKER%</td>
+            </tr>
+            <tr>
+              <td>activeFaction</td>
+              <td>%ACTIVE_FACTION%</td>
+            </tr>
+            <tr>
+              <td>faction_1_timer</td>
+              <td>%POINTS_FAC_1%</td>
+            </tr>
+            <tr>
+              <td>faction_2_timer</td>
+              <td>%POINTS_FAC_2%</td>
+            </tr>
+            <tr>
+              <td>faction_3_timer</td>
+              <td>%POINTS_FAC_3%</td>
+            </tr>
+            <tr>
+              <td>checksum</td>
+              <td>%PERSISTANCE_CHECKSUM%</td>
+            </tr>
+        </table>
+        </p>
+        <!-- Div Group Sysinfo:Persistance -->
+        <!-- Div Group LiveDebug -->
+        <hr />
+        <p>
+        <h4>Live Debug</h4>
+        <div class="form-group row">
+          <textarea class="form-control" spellcheck="false" id="livedebug-out" rows="3" readonly></textarea>
+        </div>
+        <div class="form-group row">
+          <div class="col text-center">
+            <button id="btn-ws-start" class="btn btn-outline-primary">Start</button>
+            <button id="btn-ws-stop" class="btn btn-outline-primary ml-2">Stop</button>
+          </div>
+        </div>
+        </p>
+        <!-- Div Group LiveDebug -->
+      </div>
+      <!-- Div Tab SystemInfo -->
+
+      <!-- Div Tab Firmware Update-->
+      <div id="tab_fwupdate" class="tab-pane fade" role="tabpanel">
+        <h3>Firmware</h3>
+        <!-- Div Group VersionInfo -->
+        <hr />
+        <p>
+        <h4>Version-Info</h4>
+        <table class="table">
+          <tbody>
+            <tr>
+              <th class="col-7" scope="col">Parameter</td>
+              <th class="col-5" scope="col">Value</td>
+            </tr>
+            <tr>
+              <td>Firmware Version</td>
+              <td>%SW_VERSION%</td>
+            </tr>
+            <tr>
+              <td>Flash Version</td>
+              <td>%FS_VERSION%</td>
+            </tr>
+            <tr>
+              <td>Git Revision</td>
+              <td>%GIT_REV%</td>
+            </tr>
+        </table>
+        </p>
+        <!-- Div Group VersionInfo -->
+        <!-- Div Group EEPROM Backup -->
+        <hr />
+        <p>
+        <h4>EEPROM-Backup</h4>
+        <div class="form-group row">
+          <div class="col text-center">
+            <a class="btn btn-outline-primary" href="eejson" role="button" id="ee-backup-download">Download</a>
+          </div>
+        </div>
+        </p>
+        <!-- Div Group EEPROM Backup -->
+        <!-- Div Group EEPROM Restore -->
+        <hr />
+        <p>
+        <h4>EEPROM-Restore</h4>
+        <form method='POST' action='eeRestore' enctype='multipart/form-data'>
+          <div class="form-group row">
+            <div class="custom-file">
+              <input type="file" name="ee-restore-file" class="custom-file-input" id="ee-restore-file" accept=".ee.json"
+                required />
+              <label class="custom-file-label" for="ee-restore-file">EEPROM-Backup ausw&auml;hlen</label>
+            </div>
+          </div>
+          <div class="form-group row">
+            <div class="col text-center">
+              <button name="submit" type="submit" class="btn btn-outline-primary">Restore starten</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <!-- Div Group EEPROM Restore -->
+        <!-- Div Group Firmware Update -->
+        <hr />
+        <p>
+        <h4>Firmware-Update</h4>
+        <form method='POST' action='doUpdate' enctype='multipart/form-data'>
+          <div class="form-group row">
+            <div class="custom-file">
+              <input type="file" name="fw-update-file" class="custom-file-input" id="fw-update-file"
+                accept=".fw.bin,.fs.gz" required />
+              <label class="custom-file-label" for="fw-update-file">Firmware-Update ausw&auml;hlen</label>
+            </div>
+          </div>
+          <div class="form-group row">
+            <div class="col text-center">
+              <button name="submit" type="submit" class="btn btn-outline-primary">Update starten</button>
+            </div>
+          </div>
+        </form>
+        </p>
+        <!-- Div Group Firmware Update -->
+      </div>
+      <!-- Div Tab Firmware Update-->
+    </div>
+    <!-- Tabs Content -->
+  </main>
+
+
+  <!-- Footer -->
+
+  <footer class="page-footer navbar-dark bg-primary font-small fixed-bottom">
+    <div class="container-fluid text-center">
+      <div class="footer-copyright text-center py-3">
+        <span class="text-muted">© 2023 -
+          <a class="text-reset fw-bold" href="https://hiabuto.de/">Hiabuto Defense Systems</a></span>
+      </div>
+    </div>
+  </footer>
+
+  <!-- Footer -->
+
+  <!-- Modal Dialog -->
+
+  <div class="modal fade" id="dtcModal" tabindex="-1" role="dialog" aria-labelledby="dtcModalLabel" aria-hidden="true">
+    <div class="modal-dialog modal-dialog-centered" role="document">
+      <div class="modal-content">
+        <div class="modal-header">
+          <h5 class="modal-title" id="dtcModalLabel">DTC-Description</h5>
+          <button type="button" class="close" data-dismiss="modal" aria-label="Close">
+            <span aria-hidden="true">&times;</span>
+          </button>
+        </div>
+        <div class="modal-body">
+          <p class="dtc-desc">DTC Description</p>
+          <p class="dtc-debugval">DTC DebugVal</p>
+        </div>
+        <div class="modal-footer">
+          <button type="button" class="btn btn-outline-secondary" data-dismiss="modal">Close</button>
+        </div>
+      </div>
+    </div>
+  </div>
+
+  <!-- Modal Dialog -->
+
+  <script>
+    $('.navbar-nav>li>a').on('click', function () {
+      $('.navbar-collapse').collapse('hide');
+    });
+
+    document.querySelector('.custom-file-input').addEventListener('change', function (e) {
+      var fileName = document.getElementById("fw-update-file").files[0].name;
+      var nextSibling = e.target.nextElementSibling
+      nextSibling.innerText = fileName
+    });
+
+    $(document).ready(function () {
+      $("tr[data-dtc]").each(function (i) {
+        $(this).attr('data-toggle', "modal");
+        $(this).attr('data-target', "#dtcModal");
+      });
+    });
+
+    $('#dtcModal').on('show.bs.modal', function (event) {
+      var dtctr = $(event.relatedTarget)
+      var dtc = dtctr.data('dtc')
+      var debugval = dtctr.data('debugval')
+      var modal = $(this)
+      $.getJSON('static/tt_dtc/dtc_' + dtc + '.json', function (data) {
+        modal.find('.modal-title').text(data.title)
+        modal.find('.dtc-desc').text(data.description)
+        if (debugval > 0) {
+          modal.find('.dtc-debugval').text("Debugvalue: " + debugval)
+        }
+        else {
+          modal.find('.dtc-debugval').remove()
+        }
+      }).fail(function () {
+        console.log("An error has occurred.");
+        modal.find('.modal-title').text("Fehler")
+        modal.find('.dtc-desc').text("DTC-Beschreibung konnte nicht geladen werden")
+      });
+    });
+
+  </script>
+
+</body>
+
+</html>

Software/data_src/post.htm

@@ -0,0 +1,28 @@
+<!DOCTYPE html>
+<html>
+
+<head>
+  <meta charset="utf-8" />
+  <title>KTM CAN Chain Oiler</title>
+  <meta http-equiv="content-type" content="text/html;charset=UTF-8">
+  <meta name="viewport" content="width=device-width, initial-scale=1">
+  <link rel="stylesheet" href="static/css/bootstrap.min.css">
+  <link rel="stylesheet" href="static/css/custom.css">
+  <script src="static/js/jquery.min.js"></script>
+  <script src="static/js/bootstrap.min.js"></script>
+  <link rel="apple-touch-icon" sizes="180x180" href="static/img/apple-touch-icon.png">
+  <link rel="icon" type="image/png" sizes="32x32" href="static/img/favicon-32x32.png">
+  <link rel="icon" type="image/png" sizes="16x16" href="static/img/favicon-16x16.png">
+  <link rel="manifest" href="static/img/site.webmanifest">
+  <meta http-equiv="refresh" content="3; url='index.htm'" />
+</head>
+
+<body>
+  <div class="container" style="display: flex; justify-content: center; align-items: center; height: 100vh">
+    <div class="alert alert-success">
+      <strong>Bitte warten!</strong> Änderungen werden übernommen.
+    </div>
+  </div>
+</body>
+
+</html>

Software/data_src/static/css/tweaks.css

@@ -0,0 +1,27 @@
+@font-face {
+    font-family: 'Comfortaa';
+    font-style: normal;
+    font-weight: 300;
+    src: url(../fonts/comfortaa.woff2) format('woff2');
+    unicode-range: U+0000-00FF, U+0131, U+0152-0153, U+02BB-02BC, U+02C6, U+02DA, U+02DC, U+2000-206F, U+2074, U+20AC, U+2122, U+2191, U+2193, U+2212, U+2215, U+FEFF, U+FFFD;
+  }
+
+body {
+    padding-top: 70px;
+    margin-bottom: 70px;
+}
+
+hr {
+    height: 2px;
+    border-width: 0;
+    color: gray;
+    background-color: gray
+}
+
+.dtc-debugval {
+    color: #F2771A;
+    font: 0.8rem Inconsolata, monospace;
+    background-color: black;
+    padding: 10px;
+}
+

Software/data_src/static/img/browserconfig.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<browserconfig>
+    <msapplication>
+        <tile>
+            <square150x150logo src="/mstile-150x150.png"/>
+            <TileColor>#da532c</TileColor>
+        </tile>
+    </msapplication>
+</browserconfig>

Software/data_src/static/img/safari-pinned-tab.svg

@@ -0,0 +1,345 @@
+<?xml version="1.0" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 20010904//EN"
+ "http://www.w3.org/TR/2001/REC-SVG-20010904/DTD/svg10.dtd">
+<svg version="1.0" xmlns="http://www.w3.org/2000/svg"
+ width="300.000000pt" height="300.000000pt" viewBox="0 0 300.000000 300.000000"
+ preserveAspectRatio="xMidYMid meet">
+<metadata>
+Created by potrace 1.14, written by Peter Selinger 2001-2017
+</metadata>
+<g transform="translate(0.000000,300.000000) scale(0.100000,-0.100000)"
+fill="#000000" stroke="none">
+<path d="M210 2778 c1 -198 2 -221 15 -204 13 18 17 18 41 5 31 -16 41 -36 26
+-51 -8 -8 -15 -8 -25 0 -19 16 -49 -22 -53 -69 -3 -30 1 -38 16 -42 26 -7 25
+-27 -1 -34 -18 -5 -20 -11 -15 -47 3 -23 6 -48 5 -56 0 -8 -2 -168 -4 -355
+l-4 -340 31 -18 c29 -17 31 -16 69 5 22 12 38 27 35 33 -2 7 0 18 5 26 7 11 9
+11 9 -3 0 -26 13 -23 93 25 39 24 98 58 130 76 31 18 57 38 58 44 0 7 1 63 1
+125 1 87 -2 116 -14 130 -26 29 -30 59 -13 92 8 16 19 30 23 30 8 0 7 212 -2
+235 -3 8 -2 15 2 15 10 0 8 62 -2 78 -4 7 -5 12 -1 12 3 0 1 9 -5 20 -6 11
+-17 20 -25 20 -8 0 -15 5 -15 11 0 16 -26 39 -45 39 -12 0 -15 6 -10 21 8 26
+78 139 86 139 3 0 11 -36 18 -80 13 -79 23 -101 36 -80 4 7 11 8 18 1 14 -11
+36 -14 103 -12 l52 1 25 53 c15 28 40 67 56 85 29 31 31 32 51 15 27 -23 25
+-37 -10 -100 l-30 -53 75 0 c41 0 74 3 74 8 -3 18 2 32 11 32 6 0 10 -9 10
+-20 0 -17 7 -20 39 -20 29 0 41 5 44 18 4 15 5 15 6 0 1 -13 13 -18 54 -20 99
+-6 227 3 227 15 0 7 9 23 19 37 l19 24 18 -37 c19 -39 32 -43 118 -37 30 2 60
+23 49 34 -13 13 -13 48 -1 44 7 -3 14 -20 15 -38 2 -18 5 -35 7 -37 2 -2 30
+-3 62 -1 53 3 57 4 41 19 -18 19 -13 29 15 29 13 0 18 -7 18 -25 0 -33 10 -32
+50 10 19 19 38 35 42 35 5 0 16 -16 24 -36 13 -31 18 -35 47 -32 20 2 32 8 32
+18 0 8 9 15 20 16 48 2 48 3 34 22 -13 15 -12 16 3 4 14 -11 23 -9 59 17 23
+17 46 31 52 31 8 0 539 302 556 316 2 2 -186 4 -418 3 -265 0 -419 -3 -416 -9
+4 -6 1 -10 -4 -10 -6 0 -11 5 -11 10 0 6 -16 10 -35 10 -24 0 -35 -4 -33 -12
+1 -7 -6 -26 -17 -41 l-18 -29 -16 29 c-8 15 -14 34 -13 41 2 9 -21 12 -88 12
+-70 0 -89 -3 -84 -12 6 -10 4 -10 -8 0 -23 18 -184 13 -180 -6 1 -8 -3 -12
+-10 -9 -7 2 -12 10 -11 16 2 7 -16 11 -52 11 -42 0 -55 -3 -55 -15 0 -19 -34
+-19 -50 0 -10 12 -45 14 -193 14 -128 0 -184 -4 -189 -12 -6 -9 -8 -9 -8 1 0
+7 -13 12 -30 12 -16 0 -30 -4 -30 -10 0 -5 -5 -10 -11 -10 -5 0 -7 5 -4 10 4
+7 -12 10 -44 9 -28 -1 -51 -5 -51 -9 0 -4 10 -19 21 -34 30 -38 39 -87 23
+-122 -11 -26 -12 -27 -13 -6 -1 28 -81 108 -91 91 -6 -8 -10 -8 -16 2 -4 7 -3
+14 3 16 6 2 -2 17 -18 34 -26 27 -33 29 -104 29 -61 0 -75 -3 -75 -15 0 -9 -7
+-27 -16 -41 l-17 -25 -12 23 c-6 13 -8 28 -3 34 14 19 -4 24 -89 24 l-83 0 0
+-222z m2395 192 c3 -5 1 -10 -4 -10 -6 0 -11 5 -11 10 0 6 2 10 4 10 3 0 8 -4
+11 -10z m-107 -33 c-2 -11 -9 -12 -28 -5 -24 9 -24 10 -6 24 22 15 40 6 34
+-19z m-1928 -52 c0 -5 -11 -23 -25 -40 l-24 -30 -24 26 -25 26 21 48 21 47 28
+-33 c15 -19 28 -38 28 -44z m1139 13 c-5 -10 -14 -18 -19 -18 -16 0 -23 49 -9
+66 11 14 14 13 25 -8 8 -15 9 -29 3 -40z m186 42 c3 -5 1 -10 -4 -10 -6 0 -11
+5 -11 10 0 6 2 10 4 10 3 0 8 -4 11 -10z m-1066 -9 c11 -7 10 -11 -5 -19 -18
+-10 -16 -14 19 -47 35 -33 63 -82 53 -92 -2 -2 -25 17 -50 42 -54 52 -72 90
+-55 111 13 16 19 17 38 5z m106 -1 c3 -5 1 -10 -4 -10 -6 0 -11 5 -11 10 0 6
+2 10 4 10 3 0 8 -4 11 -10z m169 -17 c9 -22 -12 -43 -23 -24 -10 15 -4 41 9
+41 4 0 11 -8 14 -17z m391 7 c3 -5 1 -10 -4 -10 -6 0 -11 5 -11 10 0 6 2 10 4
+10 3 0 8 -4 11 -10z m465 -30 c0 -13 -5 -18 -15 -14 -8 4 -15 12 -15 20 0 8 7
+14 15 14 8 0 15 -9 15 -20z m-1573 -22 c-3 -8 -6 -5 -6 6 -1 11 2 17 5 13 3
+-3 4 -12 1 -19z m592 13 c17 -11 7 -41 -14 -41 -9 0 -15 9 -15 25 0 27 6 30
+29 16z m881 -1 c0 -5 -4 -10 -10 -10 -5 0 -10 5 -10 10 0 6 5 10 10 10 6 0 10
+-4 10 -10z m-1541 -31 c33 -32 37 -44 21 -54 -6 -3 -10 4 -10 17 l0 23 -18
+-23 -18 -24 -18 27 c-16 25 -14 65 4 65 5 0 22 -14 39 -31z m1131 11 c0 -5 -4
+-10 -10 -10 -5 0 -10 5 -10 10 0 6 5 10 10 10 6 0 10 -4 10 -10z m-300 -20 c0
+-5 -4 -10 -10 -10 -5 0 -10 5 -10 10 0 6 5 10 10 10 6 0 10 -4 10 -10z m250
+-10 c0 -11 -4 -20 -10 -20 -5 0 -10 9 -10 20 0 11 5 20 10 20 6 0 10 -9 10
+-20z m116 -32 l2 -42 -19 23 c-14 17 -16 27 -9 42 17 30 25 22 26 -23z m179
+22 c3 -5 1 -10 -4 -10 -6 0 -11 5 -11 10 0 6 2 10 4 10 3 0 8 -4 11 -10z
+m-891 -16 c4 -9 1 -23 -6 -31 -10 -12 -13 -12 -20 1 -9 15 -1 46 12 46 4 0 11
+-7 14 -16z m-106 -35 c-2 -6 -8 -10 -13 -10 -5 0 -11 4 -13 10 -2 6 4 11 13
+11 9 0 15 -5 13 -11z m719 -44 c-4 -53 4 -77 18 -55 10 16 25 1 25 -24 0 -27
+-44 -71 -60 -61 -6 4 -10 17 -8 30 1 12 -4 35 -12 49 -13 25 -12 31 9 72 13
+24 25 44 27 44 3 0 3 -25 1 -55z m-167 29 c0 -8 -5 -12 -10 -9 -6 4 -8 11 -5
+16 9 14 15 11 15 -7z m560 -30 c0 -8 -4 -14 -10 -14 -5 0 -10 9 -10 21 0 11 5
+17 10 14 6 -3 10 -13 10 -21z m270 -46 c0 -23 -12 -23 -34 1 -12 13 -15 27
+-11 41 l7 21 19 -22 c10 -12 19 -30 19 -41z m-1830 18 c-13 -13 -35 7 -25 24
+5 8 11 8 21 -1 10 -8 12 -15 4 -23z m968 4 c9 -16 23 -30 30 -30 13 0 15 -10
+6 -34 -6 -15 -8 -15 -19 1 -11 15 -13 15 -20 -6 -5 -18 -9 -20 -21 -10 -29 24
+-36 48 -22 79 16 38 25 38 46 0z m-362 -88 c-6 -5 -56 44 -56 54 0 3 8 16 17
+31 l17 26 14 -53 c7 -29 11 -55 8 -58z m257 72 c-7 -19 -23 -7 -23 18 0 17 3
+18 14 8 8 -6 12 -18 9 -26z m-673 16 c0 -5 -2 -10 -4 -10 -3 0 -8 5 -11 10 -3
+6 -1 10 4 10 6 0 11 -4 11 -10z m1060 0 c0 -5 -2 -10 -4 -10 -3 0 -8 5 -11 10
+-3 6 -1 10 4 10 6 0 11 -4 11 -10z m58 -35 c-8 -17 -15 -22 -21 -16 -7 7 -6
+15 3 26 20 24 31 18 18 -10z m606 9 c3 -8 2 -12 -4 -9 -6 3 -10 10 -10 16 0
+14 7 11 14 -7z m-1469 -14 c3 -5 1 -10 -4 -10 -6 0 -11 5 -11 10 0 6 2 10 4
+10 3 0 8 -4 11 -10z m-395 -21 c0 -5 -4 -9 -10 -9 -5 0 -10 7 -10 16 0 8 5 12
+10 9 6 -3 10 -10 10 -16z m1044 5 c3 -8 2 -12 -4 -9 -6 3 -10 10 -10 16 0 14
+7 11 14 -7z m-602 -36 c-9 -9 -12 -7 -12 12 0 19 3 21 12 12 9 -9 9 -15 0 -24z
+m-432 8 c0 -2 3 -12 7 -21 5 -14 2 -16 -18 -10 -31 9 -32 11 -24 24 6 10 35
+16 35 7z m111 -68 c24 -29 23 -37 -5 -71 l-22 -28 -2 61 c0 33 1 60 4 60 3 0
+14 -10 25 -22z m73 -14 c3 -8 2 -12 -4 -9 -6 3 -10 10 -10 16 0 14 7 11 14 -7z
+m-185 -94 c17 -22 31 -44 31 -49 0 -6 4 -11 10 -11 5 0 -2 -12 -15 -26 -14
+-15 -25 -31 -25 -35 0 -5 -7 -6 -15 -3 -8 3 -13 9 -12 12 1 4 -4 22 -12 40
+-10 24 -11 35 -2 46 8 10 6 19 -9 39 -25 31 -25 36 -1 30 11 -3 33 -22 50 -43z
+m150 -30 c0 -44 0 -45 -14 -19 -8 14 -13 39 -11 55 5 41 5 41 16 24 5 -8 10
+-35 9 -60z m-54 20 c-3 -5 -11 -10 -16 -10 -6 0 -7 5 -4 10 3 6 11 10 16 10 6
+0 7 -4 4 -10z m35 -115 c11 7 29 -26 23 -42 -2 -6 1 -14 6 -18 21 -12 11 -25
+-39 -49 -44 -21 -70 -21 -56 2 2 4 8 35 11 67 9 74 13 82 32 56 8 -12 18 -19
+23 -16z m-80 -35 c0 -5 -4 -10 -10 -10 -5 0 -10 5 -10 10 0 6 5 10 10 10 6 0
+10 -4 10 -10z m237 -17 c8 -12 12 -27 8 -33 -8 -13 -65 26 -65 45 0 22 41 13
+57 -12z m-56 -33 c18 -10 26 -49 13 -63 -6 -5 -64 55 -64 67 0 9 29 7 51 -4z
+m-78 -66 c-4 -11 -9 -12 -19 -4 -7 7 -10 18 -7 26 4 11 9 12 19 4 7 -7 10 -18
+7 -26z m49 -46 c-15 -15 -27 14 -17 40 6 15 8 15 18 -6 7 -16 7 -26 -1 -34z
+m87 -90 c5 -16 6 -28 1 -28 -17 0 -60 63 -60 88 l0 27 25 -30 c13 -16 29 -42
+34 -57z m-235 -89 c-10 -16 -24 -9 -24 12 0 18 2 19 15 9 8 -7 12 -16 9 -21z
+m-37 -65 c-1 -2 -13 6 -27 16 -23 17 -23 20 -10 45 l14 26 13 -43 c6 -23 11
+-43 10 -44z m284 23 c-8 -8 -11 -3 -11 19 1 25 2 27 11 11 8 -14 8 -22 0 -30z
+m-201 -8 c0 -6 -4 -7 -10 -4 -5 3 -10 11 -10 16 0 6 5 7 10 4 6 -3 10 -11 10
+-16z m45 -59 c3 -11 11 -20 17 -20 7 0 7 -4 0 -13 -6 -7 -9 -23 -6 -34 3 -12
+1 -30 -4 -40 -10 -17 -11 -17 -17 2 -11 33 -20 48 -30 46 -18 -4 -23 43 -7 62
+20 23 39 22 47 -3z m167 -37 c-4 -24 -6 -25 -17 -9 -7 9 -11 26 -8 37 8 30 31
+5 25 -28z m-102 -5 c0 -19 -2 -20 -10 -8 -13 19 -13 30 0 30 6 0 10 -10 10
+-22z m-257 -49 c3 -14 1 -32 -3 -39 -7 -11 -12 -7 -21 13 -9 21 -9 30 1 42 15
+19 17 17 23 -16z m157 -59 c0 -25 -4 -30 -25 -30 -31 0 -31 7 -3 37 27 29 28
+29 28 -7z"/>
+<path d="M2695 2824 c-44 -25 -82 -48 -85 -52 -3 -4 -11 -8 -19 -10 -7 -1 -38
+-19 -70 -39 -31 -20 -60 -38 -66 -39 -5 -1 -57 -29 -113 -63 -57 -34 -118 -70
+-135 -79 -18 -9 -78 -44 -134 -76 l-101 -59 18 -35 c14 -25 16 -40 9 -53 -23
+-43 -42 -35 -64 26 l-13 38 -24 -24 c-13 -13 -33 -24 -43 -24 -13 0 -20 -7
+-21 -20 -2 -37 -5 -40 -17 -23 -12 14 -25 9 -140 -55 l-127 -72 2 -47 c1 -55
+-23 -98 -32 -58 -7 31 -26 36 -27 8 -1 -60 -3 -68 -21 -68 -26 0 -44 41 -26
+58 8 7 14 22 14 32 0 19 -4 18 -57 -11 -32 -18 -64 -39 -70 -47 -7 -9 -13 -12
+-13 -8 0 4 -13 0 -29 -10 -18 -11 -31 -29 -37 -53 -6 -25 -15 -36 -26 -35 -11
+1 -21 -10 -29 -33 l-11 -35 -27 26 c-30 28 -53 33 -69 13 -12 -14 11 -52 31
+-52 7 0 13 -12 15 -27 3 -22 -1 -28 -16 -28 -20 0 -39 16 -42 35 -3 23 -12 55
+-17 55 -13 0 -133 -76 -133 -85 0 -6 -10 -15 -22 -20 -12 -6 -25 -21 -29 -35
+-4 -14 -7 -18 -8 -8 -2 27 -19 31 -51 11 -28 -16 -35 -26 -31 -47 1 -4 -9 -6
+-23 -2 -14 3 -30 1 -38 -6 -8 -7 -49 -31 -92 -53 -43 -22 -89 -50 -102 -62
+-13 -12 -24 -20 -24 -17 0 3 -8 1 -17 -5 -10 -5 -18 -19 -18 -32 0 -12 -6 -24
+-12 -26 -7 -3 -13 2 -13 11 0 21 -4 20 -61 -10 -40 -22 -48 -31 -43 -49 4 -17
+-6 -31 -47 -66 -28 -24 -60 -50 -70 -57 -16 -11 -19 -27 -19 -108 0 -81 3 -96
+18 -101 64 -23 134 -105 116 -135 -4 -6 4 -4 17 3 26 13 253 144 309 178 19
+11 46 26 60 33 14 7 27 15 30 18 3 3 26 16 52 30 83 43 83 44 59 83 -11 19
+-21 45 -21 58 0 24 37 95 45 87 10 -10 42 -118 35 -118 -5 0 -13 -14 -19 -30
+l-10 -31 42 26 c23 14 95 55 160 92 109 63 117 70 112 94 -3 14 -2 36 4 50 l9
+24 7 -30 c13 -58 12 -57 57 -29 24 15 45 28 47 30 2 2 -4 20 -15 39 -17 31
+-17 37 -4 45 22 14 27 12 27 -7 0 -10 1 -31 2 -48 2 -29 2 -30 19 -10 9 11 23
+20 30 21 29 2 33 5 30 22 -2 13 3 17 25 15 34 -2 34 7 1 38 -42 39 -55 71 -43
+112 5 19 9 39 8 44 -7 40 26 44 70 8 24 -21 28 -30 22 -47 -6 -16 0 -33 22
+-64 l30 -43 36 24 c20 14 52 32 71 42 19 9 63 34 98 55 34 21 66 38 71 38 4 0
+5 17 2 38 -4 20 -4 55 0 77 11 60 1 99 -38 145 -31 36 -35 46 -29 78 6 40 28
+62 62 62 18 0 31 -21 80 -130 33 -71 65 -130 72 -130 6 0 12 -9 12 -20 0 -23
+8 -25 32 -6 14 10 15 15 5 26 -10 10 -8 10 10 1 18 -9 24 -8 32 7 7 12 6 25
+-2 39 -47 81 -48 83 -34 83 25 0 65 -39 72 -70 7 -33 8 -33 107 23 36 21 69
+45 72 53 3 8 11 12 17 9 5 -4 29 6 52 21 23 16 44 29 47 29 3 0 28 14 55 29
+28 16 67 39 88 51 20 12 35 25 32 28 -3 4 -2 5 1 2 9 -6 84 34 84 45 0 6 7 10
+16 10 8 0 35 12 60 26 36 21 44 31 44 54 0 16 -11 42 -25 59 l-26 30 23 3 c20
+3 23 10 26 50 2 38 0 47 -11 42 -9 -3 -16 3 -19 14 -6 23 9 55 23 47 5 -4 9
+38 9 104 0 61 -3 111 -7 111 -5 0 -44 -21 -88 -46z m33 -44 c12 -12 22 -23 22
+-25 0 -11 -24 -55 -30 -55 -3 0 -11 23 -16 50 -12 55 -8 60 24 30z m42 -70 c0
+-5 -2 -10 -4 -10 -3 0 -8 5 -11 10 -3 6 -1 10 4 10 6 0 11 -4 11 -10z m-150
+-52 c0 -16 -3 -19 -11 -11 -6 6 -8 16 -5 22 11 17 16 13 16 -11z m-97 -14 c-7
+-18 -19 -18 -26 0 -7 18 1 26 18 19 8 -2 11 -11 8 -19z m15 -100 c12 -22 -9
+-79 -33 -88 -10 -4 -13 12 -13 70 0 72 1 75 18 57 9 -11 22 -28 28 -39z m-316
+-26 c-7 -7 -12 -8 -12 -2 0 6 3 14 7 17 3 4 9 5 12 2 2 -3 -1 -11 -7 -17z m20
+-93 c0 -5 -5 -11 -11 -13 -6 -2 -11 4 -11 13 0 9 5 15 11 13 6 -2 11 -8 11
+-13z m-212 -20 c0 -8 -2 -15 -4 -15 -2 0 -6 7 -10 15 -3 8 -1 15 4 15 6 0 10
+-7 10 -15z m173 -31 c22 -22 24 -29 15 -50 -13 -27 -25 -30 -51 -10 -14 11
+-17 22 -12 50 9 43 14 44 48 10z m-113 -19 c0 -9 -6 -12 -16 -8 -13 5 -13 7
+-2 14 17 11 18 11 18 -6z m48 -25 c-1 -16 -6 -30 -10 -30 -9 0 -10 22 -2 44
+10 25 15 19 12 -14z m182 -20 c13 -31 6 -100 -10 -100 -14 0 -40 43 -40 67 0
+31 18 75 29 69 4 -3 14 -19 21 -36z m-390 -20 c0 -5 -2 -10 -4 -10 -3 0 -8 5
+-11 10 -3 6 -1 10 4 10 6 0 11 -4 11 -10z m66 -57 c-10 -11 -25 18 -18 35 4
+13 8 11 15 -6 6 -12 7 -25 3 -29z m-226 7 c0 -5 -4 -10 -10 -10 -5 0 -10 5
+-10 10 0 6 5 10 10 10 6 0 10 -4 10 -10z m483 -47 c-5 -12 -7 -12 -14 -1 -5 7
+-9 19 -9 27 0 11 3 11 14 1 8 -6 12 -18 9 -27z m207 16 c0 -5 -4 -9 -10 -9 -5
+0 -10 7 -10 16 0 8 5 12 10 9 6 -3 10 -10 10 -16z m-123 -11 c-3 -8 -6 -5 -6
+6 -1 11 2 17 5 13 3 -3 4 -12 1 -19z m-617 -15 c0 -21 -3 -24 -9 -14 -5 8 -7
+20 -4 28 8 21 13 15 13 -14z m383 -22 c3 -11 2 -22 -1 -25 -9 -10 -31 15 -25
+30 7 20 20 17 26 -5z m-113 -27 c0 -8 -4 -12 -10 -9 -5 3 -10 10 -10 16 0 5 5
+9 10 9 6 0 10 -7 10 -16z m-273 -66 c-3 -8 -6 -5 -6 6 -1 11 2 17 5 13 3 -3 4
+-12 1 -19z m296 -22 c3 -8 0 -22 -7 -32 -13 -17 -14 -16 -20 4 -11 34 15 60
+27 28z m-643 -46 c0 -5 -2 -10 -4 -10 -3 0 -8 5 -11 10 -3 6 -1 10 4 10 6 0
+11 -4 11 -10z m178 -23 c13 -15 -1 -42 -17 -33 -13 8 -15 46 -2 46 5 0 13 -6
+19 -13z m93 -20 c-1 -12 -15 -9 -19 4 -3 6 1 10 8 8 6 -3 11 -8 11 -12z m108
+-29 c5 -13 16 -39 25 -59 l15 -37 -27 3 c-35 4 -72 16 -72 23 0 7 43 92 47 92
+2 0 7 -10 12 -22z m-159 -29 c0 -18 -18 -9 -23 12 -4 16 -3 18 9 8 8 -6 14
+-15 14 -20z m-95 11 c11 -17 -5 -32 -21 -19 -7 6 -11 15 -8 20 7 12 21 11 29
+-1z m-128 -22 c-3 -8 -6 -5 -6 6 -1 11 2 17 5 13 3 -3 4 -12 1 -19z m-31 -58
+c2 -35 -6 -38 -23 -10 -11 16 -10 21 5 29 9 6 17 11 17 11 0 0 1 -13 1 -30z
+m-306 -26 c0 -8 -4 -12 -10 -9 -5 3 -10 13 -10 21 0 8 5 12 10 9 6 -3 10 -13
+10 -21z m573 -21 c-3 -7 -9 -13 -13 -13 -14 0 -18 24 -7 45 10 19 10 19 17 0
+4 -11 5 -26 3 -32z m-337 -56 c-4 -18 1 -38 12 -55 l17 -27 -33 23 c-40 29
+-64 72 -51 93 5 8 9 25 9 38 0 24 1 23 26 -10 18 -25 24 -42 20 -62z m124 57
+c0 -24 -17 -15 -22 11 -4 20 -3 23 8 14 8 -6 14 -18 14 -25z m310 -8 c-15 -15
+-32 7 -24 29 7 17 8 17 21 -1 9 -12 10 -21 3 -28z m-725 -12 c-3 -29 -2 -34 9
+-25 11 9 15 5 18 -23 4 -33 3 -34 -13 -20 -36 33 -49 104 -19 104 6 0 8 -15 5
+-36z m107 14 c6 -17 -1 -38 -13 -38 -5 0 -9 11 -9 25 0 26 14 34 22 13z m64
+-53 c4 -8 1 -22 -6 -30 -9 -11 -9 -22 1 -49 11 -31 10 -41 -5 -72 l-17 -37
+-24 34 c-14 18 -25 43 -25 55 0 24 30 84 43 84 4 0 7 7 7 15 0 20 19 19 26 0z
+m189 6 c3 -5 1 -12 -4 -15 -5 -3 -11 1 -15 9 -6 16 9 21 19 6z m-515 -31 c0
+-5 -5 -10 -11 -10 -5 0 -7 5 -4 10 3 6 8 10 11 10 2 0 4 -4 4 -10z m-45 -40
+c7 -23 -2 -43 -16 -35 -12 8 -12 55 0 55 5 0 12 -9 16 -20z m205 -15 c0 -18
+-4 -23 -15 -19 -15 6 -20 35 -9 47 12 11 24 -3 24 -28z m-90 -32 l-1 -58 -19
+24 c-23 27 -25 44 -8 71 21 33 28 23 28 -37z m-231 -20 c1 -26 0 -45 -1 -42
+-2 2 -11 13 -20 25 -16 18 -16 22 -2 42 8 12 16 22 18 22 1 0 4 -21 5 -47z
+m290 1 c21 -27 36 -63 28 -70 -10 -10 -39 10 -52 37 -29 56 -13 79 24 33z m86
+-4 c-5 -8 -11 -8 -17 -2 -6 6 -7 16 -3 22 5 8 11 8 17 2 6 -6 7 -16 3 -22z
+m163 -52 c-7 -19 -21 -12 -23 9 -1 18 1 20 12 11 8 -6 12 -15 11 -20z m-113
+-8 c3 -5 1 -10 -4 -10 -6 0 -11 5 -11 10 0 6 2 10 4 10 3 0 8 -4 11 -10z m-42
+-46 c-4 -11 -9 -12 -19 -4 -7 7 -10 18 -7 26 4 11 9 12 19 4 7 -7 10 -18 7
+-26z m-453 -28 c0 -6 -8 -20 -16 -31 l-15 -20 -15 20 c-8 11 -20 20 -27 20 -6
+0 -13 8 -15 19 -2 11 0 16 7 12 5 -4 15 3 21 15 l12 21 24 -23 c13 -12 24 -27
+24 -33z m344 9 c-6 -15 -8 -15 -16 -2 -4 8 -5 23 -2 32 6 15 8 15 16 2 4 -8 5
+-23 2 -32z m-152 -44 c-5 -3 -12 -13 -16 -21 -3 -8 -4 -4 -2 9 3 14 1 30 -4
+36 -6 7 -3 20 8 36 l17 24 3 -39 c2 -21 -1 -42 -6 -45z m308 -1 c0 -5 -2 -10
+-4 -10 -3 0 -8 5 -11 10 -3 6 -1 10 4 10 6 0 11 -4 11 -10z m-655 -17 c13 -12
+19 -13 24 -4 14 23 6 -53 -8 -79 -13 -23 -14 -23 -21 -5 -10 27 -21 105 -16
+105 3 0 12 -7 21 -17z m239 -19 c-6 -3 -10 -18 -8 -34 4 -32 -6 -39 -24 -17
+-13 15 11 58 31 56 8 0 9 -2 1 -5z m50 -20 c3 -8 2 -12 -4 -9 -6 3 -10 10 -10
+16 0 14 7 11 14 -7z m-71 -86 c-19 -33 -40 -39 -35 -10 4 18 29 42 45 42 5 0
+1 -14 -10 -32z m-198 -102 c7 3 27 -7 44 -23 l31 -28 -26 -23 -27 -23 6 30 c6
+28 5 30 -16 20 -19 -9 -22 -17 -19 -47 l3 -37 -25 40 c-25 40 -26 65 -3 94 7
+8 13 9 15 3 2 -6 9 -9 17 -6z m-125 -46 c0 -22 -16 -35 -25 -20 -9 14 4 52 16
+45 5 -4 9 -15 9 -25z"/>
+<path d="M2720 2219 c-68 -38 -62 -31 -62 -73 0 -41 -17 -47 -46 -16 l-19 20
+-24 -22 c-14 -13 -29 -23 -34 -23 -22 0 -185 -101 -181 -112 3 -7 -1 -10 -9
+-6 -11 4 -109 -42 -133 -62 -1 -1 7 -23 19 -49 31 -70 24 -211 -12 -250 -9
+-11 -29 34 -29 67 0 11 -9 31 -21 43 -14 15 -19 29 -14 43 3 12 11 19 16 15 5
+-3 7 -9 5 -13 -3 -4 0 -13 5 -21 7 -11 9 -5 8 20 -1 19 1 59 5 88 l8 53 -24
+-14 c-24 -15 -366 -215 -428 -249 -221 -125 -349 -202 -344 -209 3 -5 2 -14
+-2 -21 -5 -8 -9 -7 -13 5 -6 15 -9 15 -36 -3 -19 -13 -24 -20 -14 -20 31 0 40
+-24 20 -54 l-19 -28 -12 36 c-13 41 -21 43 -58 18 -15 -10 -35 -22 -45 -25
+-11 -4 -21 -16 -24 -28 -4 -14 -8 -17 -13 -8 -6 8 -25 1 -71 -26 -77 -46 -100
+-65 -93 -76 3 -5 0 -9 -5 -9 -6 0 -11 5 -11 11 0 5 -5 7 -10 4 -6 -4 -8 -11
+-5 -16 11 -16 -5 -31 -21 -18 -11 9 -54 -12 -203 -97 -180 -103 -191 -111
+-191 -139 -1 -25 -2 -27 -11 -12 -14 24 -24 22 -83 -15 -28 -17 -67 -40 -86
+-50 -129 -73 -180 -103 -180 -108 0 -4 17 -16 38 -28 l39 -22 13 25 c16 29 27
+32 27 7 0 -51 5 -61 39 -81 19 -12 36 -21 37 -21 1 0 11 15 21 34 13 24 23 33
+34 29 11 -5 14 -2 9 10 -3 9 -3 17 2 17 8 0 12 -18 28 -118 5 -29 15 -39 87
+-80 44 -26 84 -46 89 -44 4 1 7 -3 7 -8 0 -6 12 -16 28 -23 15 -6 49 -27 77
+-44 27 -18 52 -33 56 -33 3 0 14 18 24 40 10 22 22 40 27 40 18 0 47 -82 38
+-106 -8 -20 -4 -26 26 -45 34 -21 36 -21 49 -3 13 18 14 18 34 0 12 -11 20
+-28 19 -38 -2 -14 47 -47 212 -146 118 -71 216 -128 218 -126 2 1 -2 11 -9 22
+-11 17 -10 24 2 38 13 16 14 14 19 -19 l5 -36 74 44 c40 25 74 45 76 45 1 0
+29 16 61 35 50 30 59 40 60 66 1 16 10 39 20 50 18 20 18 20 31 -6 8 -14 16
+-25 19 -25 3 0 25 11 50 24 l45 24 -25 18 c-19 15 -24 25 -19 46 6 30 22 35
+55 17 15 -8 19 -17 14 -39 -5 -28 -2 -27 124 48 71 42 130 83 130 90 0 6 10
+12 22 12 16 0 85 36 127 67 2 1 -2 9 -8 17 -7 8 -9 20 -5 27 5 8 12 5 23 -9
+16 -21 17 -21 209 94 l192 116 0 244 c0 134 -3 244 -6 244 -3 0 -46 -24 -97
+-54 -51 -29 -112 -65 -137 -78 -119 -66 -220 -130 -216 -137 3 -4 1 -13 -4
+-21 -7 -12 -10 -12 -15 2 -6 16 -9 16 -30 2 -13 -8 -29 -28 -35 -45 -11 -26
+-14 -28 -25 -12 -11 15 -20 12 -96 -32 -134 -78 -127 -70 -85 -97 46 -30 60
+-64 49 -119 l-9 -44 -44 2 c-25 1 -47 -3 -51 -9 -15 -25 21 -68 78 -93 52 -23
+55 -27 48 -52 -13 -56 -27 -59 -94 -19 -34 20 -64 36 -67 36 -21 0 -64 77 -64
+114 0 7 19 19 43 27 61 23 62 50 1 88 l-48 29 -28 -19 c-15 -11 -28 -26 -28
+-34 0 -7 -9 -23 -20 -36 l-19 -24 -1 23 c0 28 -3 27 -67 -7 -52 -28 -52 -28
+-33 -46 22 -20 26 -55 8 -73 -20 -20 -28 -14 -28 21 0 59 -11 62 -78 21 -34
+-20 -62 -38 -62 -41 0 -2 18 -31 40 -63 22 -32 40 -61 40 -65 0 -3 -17 5 -38
+18 -20 13 -45 26 -55 30 -9 4 -26 22 -37 41 -16 26 -66 61 -215 150 -107 64
+-195 118 -195 120 0 2 56 36 125 75 69 40 125 76 125 80 0 16 -46 47 -68 45
+-16 -1 -21 3 -18 12 3 8 1 14 -4 14 -6 0 -10 -6 -10 -12 0 -18 -20 13 -20 31
+0 10 3 11 14 2 11 -9 15 -5 18 24 2 19 0 41 -4 48 -6 9 -8 8 -8 -3 -1 -12 -3
+-11 -14 3 -8 10 -11 27 -8 39 5 20 6 20 18 3 8 -10 16 -16 18 -14 10 9 8 86
+-3 129 -16 66 -14 79 7 52 28 -37 101 -47 160 -23 72 29 75 29 100 -1 31 -36
+23 -58 -23 -59 -19 -1 -39 -3 -45 -4 -5 -1 -14 -3 -18 -4 -12 -1 -14 -93 -3
+-109 4 -8 24 -17 42 -21 26 -5 35 -13 39 -33 l5 -26 125 73 c92 54 128 80 137
+101 8 19 12 23 13 12 0 -10 3 -18 6 -18 16 0 143 78 173 106 36 34 38 43 40
+157 1 44 3 47 20 38 20 -11 39 -54 48 -106 3 -16 6 -31 7 -32 1 -1 59 32 129
+72 70 41 146 85 170 98 113 64 167 99 167 107 0 6 7 10 16 10 27 0 75 33 69
+48 -3 8 1 23 9 34 14 20 14 20 21 -1 3 -12 11 -21 17 -21 13 0 128 69 128 77
+0 4 -3 3 -6 0 -8 -8 -39 30 -48 59 -4 12 -2 34 4 49 10 27 11 27 30 10 20 -18
+20 -17 20 65 0 72 -2 81 -13 66 -13 -18 -15 -17 -34 8 -12 14 -28 26 -38 26
+-9 0 -13 5 -10 10 4 6 11 8 16 5 5 -4 9 -2 9 3 0 19 33 22 51 6 18 -17 19 -14
+19 79 0 54 -3 97 -7 97 -5 0 -33 -14 -63 -31z m-42 -220 c-2 -6 -8 -10 -13
+-10 -5 0 -11 4 -13 10 -2 6 4 11 13 11 9 0 15 -5 13 -11z m-246 -46 c20 -18
+24 -58 8 -68 -16 -10 -60 23 -55 40 3 8 7 22 10 30 6 19 14 19 37 -2z m248
+-42 c0 -3 -8 -17 -17 -31 l-17 -24 -12 35 c-18 48 -17 49 16 38 17 -6 30 -14
+30 -18z m-317 -36 c-7 -21 -13 -19 -13 6 0 11 4 18 10 14 5 -3 7 -12 3 -20z
+m-183 -9 c0 -11 -19 -15 -25 -6 -3 5 1 10 9 10 9 0 16 -2 16 -4z m450 -40 c-8
+-8 -13 -7 -20 4 -12 20 -1 33 16 19 11 -9 12 -15 4 -23z m-500 -6 c0 -10 -5
+-22 -11 -25 -6 -5 -4 -11 6 -19 15 -11 15 -14 -4 -36 l-20 -25 -2 30 c-2 17
+-3 39 -4 50 -2 27 14 57 26 50 5 -4 9 -15 9 -25z m-10 -120 c0 -5 -2 -10 -4
+-10 -3 0 -8 5 -11 10 -3 6 -1 10 4 10 6 0 11 -4 11 -10z m-215 -10 c3 -5 1
+-10 -4 -10 -6 0 -11 5 -11 10 0 6 2 10 4 10 3 0 8 -4 11 -10z m152 -36 c7 3
+15 1 17 -3 3 -5 18 -11 34 -14 24 -5 28 -11 30 -44 1 -21 5 -55 8 -76 5 -37 5
+-38 -18 -26 -40 21 -128 82 -128 88 -1 3 -7 31 -14 62 l-14 57 36 -24 c20 -14
+42 -22 49 -20z m433 6 c0 -5 -4 -10 -10 -10 -5 0 -10 5 -10 10 0 6 5 10 10 10
+6 0 10 -4 10 -10z m-690 -93 c0 -5 -5 -5 -10 -2 -6 4 -8 10 -5 15 3 5 -4 11
+-15 15 -22 7 -26 35 -8 53 10 10 15 3 25 -30 7 -24 13 -47 13 -51z m121 -25
+c15 -27 15 -31 -1 -61 l-16 -33 -17 26 c-9 14 -17 31 -17 38 0 9 -3 9 -10 -2
+-5 -8 -10 -11 -10 -7 0 12 40 67 48 67 4 0 14 -13 23 -28z m270 -19 c-9 -17
+-10 -17 -16 0 -4 9 -4 25 0 35 6 16 7 16 16 0 7 -12 7 -24 0 -35z m-505 1 c17
+-16 24 -32 21 -45 -3 -10 0 -19 6 -20 7 0 2 -4 -11 -10 -25 -10 -72 13 -72 35
+0 12 23 66 28 66 2 0 14 -12 28 -26z m73 -8 c7 -8 8 -17 3 -20 -6 -3 -12 3
+-15 14 -6 24 -4 25 12 6z m491 -36 c0 -5 -2 -10 -4 -10 -3 0 -8 5 -11 10 -3 6
+-1 10 4 10 6 0 11 -4 11 -10z m-746 -36 c3 -8 2 -12 -4 -9 -6 3 -10 10 -10 16
+0 14 7 11 14 -7z m-42 -56 c-9 -9 -12 -7 -12 12 0 19 3 21 12 12 9 -9 9 -15 0
+-24z m405 10 c-3 -8 -6 -5 -6 6 -1 11 2 17 5 13 3 -3 4 -12 1 -19z m-457 -59
+c0 -10 -4 -19 -10 -19 -5 0 -10 12 -10 26 0 14 4 23 10 19 6 -3 10 -15 10 -26z
+m203 16 c4 -8 2 -17 -2 -20 -5 -2 -11 4 -14 15 -6 23 8 27 16 5z m87 -84 c0
+-11 5 -21 11 -23 5 -2 7 -11 3 -21 -5 -14 -13 -17 -33 -11 -14 4 -37 8 -51 9
+-16 1 -26 9 -28 21 -3 15 -1 16 9 7 9 -10 18 -7 41 12 35 30 48 31 48 6z
+m-485 -70 c-10 -16 -25 -3 -25 22 0 20 1 20 16 5 9 -9 13 -21 9 -27z m407 -88
+c2 -3 -9 -7 -24 -9 -23 -2 -28 1 -29 19 0 12 -2 30 -4 40 -2 12 5 8 25 -13 16
+-17 30 -34 32 -37z m-572 41 c0 -8 -5 -12 -10 -9 -6 4 -8 11 -5 16 9 14 15 11
+15 -7z m-157 -46 c6 -42 -2 -49 -21 -18 -9 15 -10 26 -1 41 13 25 15 24 22
+-23z m47 32 c0 -5 -4 -10 -10 -10 -5 0 -10 5 -10 10 0 6 5 10 10 10 6 0 10 -4
+10 -10z m590 -36 c0 -8 -4 -14 -10 -14 -5 0 -10 9 -10 21 0 11 5 17 10 14 6
+-3 10 -13 10 -21z m-537 -25 c-5 -5 -9 3 -11 19 -1 24 0 25 9 9 7 -11 7 -23 2
+-28z m107 20 c0 -11 -4 -18 -10 -14 -5 3 -7 12 -3 20 7 21 13 19 13 -6z m1585
+-32 c0 -26 -20 -25 -23 2 -3 16 1 22 10 19 7 -3 13 -12 13 -21z m-1897 -43 c1
+-14 6 -33 11 -42 9 -18 4 -42 -8 -42 -10 0 -31 46 -31 68 0 14 17 42 25 42 0
+0 2 -11 3 -26z m57 7 c3 -5 1 -12 -5 -16 -5 -3 -10 1 -10 9 0 18 6 21 15 7z
+m187 -8 c10 -9 18 -23 18 -32 -1 -19 -29 -72 -30 -55 0 7 -9 14 -20 17 -14 3
+-20 14 -20 32 0 19 4 26 14 22 10 -4 12 0 9 14 -6 23 4 24 29 2z m73 -32 c3
+-5 1 -12 -5 -16 -5 -3 -10 1 -10 9 0 18 6 21 15 7z m1385 -67 c0 -9 -5 -12
+-12 -8 -27 15 -38 27 -32 35 8 13 44 -9 44 -27z m-1552 -8 c7 1 8 0 3 -2 -6
+-3 -8 -11 -6 -17 17 -56 15 -67 -7 -67 -48 1 -73 50 -52 105 6 14 9 14 28 -3
+11 -11 27 -18 34 -16z m109 2 c-3 -8 -6 -5 -6 6 -1 11 2 17 5 13 3 -3 4 -12 1
+-19z m105 -62 c-16 -30 -17 -30 -20 -8 -3 18 -7 21 -17 12 -10 -8 -14 -4 -18
+16 -3 18 -1 22 6 15 18 -18 24 -12 19 22 l-4 32 25 -29 c25 -29 25 -30 9 -60z
+m-515 58 c10 -28 -13 -37 -25 -9 -10 21 -9 25 4 25 8 0 17 -7 21 -16z m373
+-49 c0 -8 -4 -17 -10 -20 -6 -4 -10 5 -10 20 0 15 4 24 10 20 6 -3 10 -12 10
+-20z m-320 -16 c0 -24 -12 -24 -27 0 -10 15 -10 21 0 24 18 6 27 -2 27 -24z
+m-110 -5 c0 -8 -5 -12 -10 -9 -6 4 -8 11 -5 16 9 14 15 11 15 -7z m220 12 c0
+-3 -4 -8 -10 -11 -5 -3 -10 -1 -10 4 0 6 5 11 10 11 6 0 10 -2 10 -4z m1790
+-38 c0 -30 0 -31 -20 -13 -19 17 -19 19 -2 31 23 18 22 18 22 -18z m-1950 -34
+c0 -8 -5 -12 -10 -9 -6 4 -8 11 -5 16 9 14 15 11 15 -7z m100 6 c0 -5 -2 -10
+-4 -10 -3 0 -8 5 -11 10 -3 6 -1 10 4 10 6 0 11 -4 11 -10z m301 -16 c9 -11 8
+-21 -1 -44 -16 -39 -26 -38 -33 3 -3 17 -8 40 -12 49 -5 13 -2 15 14 11 11 -3
+26 -11 32 -19z m1259 -51 c0 -30 -20 -73 -35 -73 -6 0 -19 15 -27 34 -16 32
+-16 35 9 71 l26 38 13 -24 c7 -13 13 -34 14 -46z m-1873 35 c-3 -8 -6 -5 -6 6
+-1 11 2 17 5 13 3 -3 4 -12 1 -19z m2082 -63 c1 -50 -12 -59 -41 -28 -28 31
+-29 47 -2 88 l18 28 13 -29 c7 -16 12 -42 12 -59z m-1686 38 c7 -43 3 -53 -24
+-53 -10 0 -28 -9 -39 -20 -11 -11 -23 -20 -27 -20 -5 0 -9 -11 -10 -25 -1 -14
+-8 -34 -16 -46 -14 -20 -16 -18 -27 38 -6 32 -12 64 -13 72 -2 14 115 89 139
+90 6 1 14 -15 17 -36z m95 9 c14 -9 16 -159 1 -167 -9 -6 -59 56 -59 75 0 7 9
+28 21 46 11 19 18 38 14 44 -7 12 5 13 23 2z m-535 -39 c-6 -14 -8 -14 -14 3
+-12 30 -10 37 5 24 8 -6 12 -19 9 -27z m777 -88 c-6 -19 -13 -35 -15 -35 -3 0
+-15 16 -29 36 -24 35 -24 38 -9 70 l16 34 24 -36 c22 -31 23 -39 13 -69z
+m-313 53 c-3 -8 -6 -5 -6 6 -1 11 2 17 5 13 3 -3 4 -12 1 -19z m385 -50 c-13
+-13 -26 8 -17 30 6 16 7 16 17 -1 7 -13 7 -22 0 -29z m908 2 c0 -5 -2 -10 -4
+-10 -3 0 -8 5 -11 10 -3 6 -1 10 4 10 6 0 11 -4 11 -10z m-845 -53 c17 -33 17
+-35 -1 -65 -10 -18 -21 -32 -24 -31 -3 0 -15 13 -28 30 l-24 29 22 35 c12 19
+25 35 29 35 4 0 16 -15 26 -33z m-265 -59 l0 -32 -16 23 c-14 19 -14 25 -3 32
+19 12 19 13 19 -23z m-220 -19 c0 -6 -4 -7 -10 -4 -5 3 -10 11 -10 16 0 6 5 7
+10 4 6 -3 10 -11 10 -16z m436 -96 c-11 -12 -27 13 -20 32 7 17 8 17 17 -3 6
+-12 7 -25 3 -29z m-52 -44 c-8 -13 -24 -1 -24 18 0 13 3 13 15 3 8 -7 12 -16
+9 -21z m196 16 c0 -8 -4 -15 -10 -15 -5 0 -7 7 -4 15 4 8 8 15 10 15 2 0 4 -7
+4 -15z m-93 -61 c17 -4 -4 -54 -23 -54 -9 0 -34 48 -34 66 0 2 34 -4 57 -12z
+m-57 -20 c0 -8 -4 -14 -10 -14 -5 0 -10 9 -10 21 0 11 5 17 10 14 6 -3 10 -13
+10 -21z m60 -60 c0 -8 -5 -12 -10 -9 -6 4 -8 11 -5 16 9 14 15 11 15 -7z m103
+-40 c18 -24 18 -25 -7 -55 l-26 -31 0 26 c0 14 0 27 0 29 -1 1 -5 19 -9 39 -8
+32 -7 35 8 26 9 -5 24 -21 34 -34z m364 14 c-3 -8 -6 -5 -6 6 -1 11 2 17 5 13
+3 -3 4 -12 1 -19z m-247 -69 c0 -20 -15 -26 -24 -10 -8 13 4 42 15 35 5 -3 9
+-14 9 -25z m-63 -64 c0 -8 -4 -12 -9 -9 -5 3 -6 10 -3 15 9 13 12 11 12 -6z"/>
+<path d="M210 982 c0 -45 3 -82 6 -82 5 0 68 35 83 46 3 2 -42 62 -81 109 -4
+5 -8 -28 -8 -73z"/>
+<path d="M1440 1001 c-7 -15 -7 -21 0 -21 12 0 25 28 17 36 -3 3 -10 -4 -17
+-15z"/>
+</g>
+</svg>

Software/data_src/static/img/site.webmanifest

@@ -0,0 +1,19 @@
+{
+    "name": "",
+    "short_name": "",
+    "icons": [
+        {
+            "src": "/android-chrome-192x192.png",
+            "sizes": "192x192",
+            "type": "image/png"
+        },
+        {
+            "src": "/android-chrome-256x256.png",
+            "sizes": "256x256",
+            "type": "image/png"
+        }
+    ],
+    "theme_color": "#ffffff",
+    "background_color": "#ffffff",
+    "display": "standalone"
+}

Software/data_src/static/js/websocket.js

@@ -0,0 +1,84 @@
+var gateway = `ws://${window.location.hostname}/ws`;
+var websocket;
+
+window.addEventListener("load", onLoad);
+
+function initWebSocket() {
+  console.log("Trying to open a WebSocket connection...");
+  websocket = new WebSocket(gateway);
+  websocket.onopen = onOpen;
+  websocket.onclose = onClose;
+  websocket.onmessage = onMessage; // <-- add this line
+}
+
+function initButtons() {
+  document
+    .getElementById("btn-ws-stop")
+    .addEventListener("click", livedebug_stop);
+  document
+    .getElementById("btn-ws-start")
+    .addEventListener("click", livedebug_start);
+}
+
+function onOpen(event) {
+  console.log("Connection opened");
+}
+
+function onClose(event) {
+  console.log("Connection closed");
+  setTimeout(initWebSocket, 2000);
+}
+
+function onMessage(event) {
+  var livedebug_out = document.getElementById("livedebug-out");
+  var textarea_heigth = livedebug_out.scrollHeight;
+  livedebug_out.value += event.data;
+  livedebug_out.scrollTop = livedebug_out.scrollHeight;
+  do_resize(livedebug_out);
+}
+
+function onLoad(event) {
+  initWebSocket();
+  initButtons();
+}
+
+function livedebug_start() {
+  websocket.send("start");
+}
+
+function livedebug_stop() {
+  websocket.send("stop");
+}
+
+function do_resize(textbox) {
+  var maxrows = 15;
+  var minrows = 3;
+  var txt = textbox.value;
+  var cols = textbox.cols;
+
+  var arraytxt = txt.split("\n");
+  var rows = arraytxt.length;
+
+  for (i = 0; i < arraytxt.length; i++)
+    rows += parseInt(arraytxt[i].length / cols);
+
+  if (rows > maxrows) textbox.rows = maxrows;
+  else if (rows < minrows) textbox.rows = minrows;
+  else textbox.rows = rows;
+}
+
+function notifyMe() {
+  if (!("Notification" in window)) {
+    alert("This browser does not support desktop notification");
+  } else if (Notification.permission === "granted") {
+    const notification = new Notification("Hi there!");
+    // …
+  } else if (Notification.permission !== "denied") {
+    Notification.requestPermission().then((permission) => {
+      if (permission === "granted") {
+        const notification = new Notification("Hi there!");
+        // …
+      }
+    });
+  }
+}

Software/data_src/static/tt_dtc/dtc_1.json

@@ -0,0 +1,4 @@
+{
+    "title": "kein EEPROM gefunden",
+    "description": "Es wurde kein EEPROM gefunden. Dies lässt einen Hardware-Defekt vermuten."
+}

Software/data_src/static/tt_dtc/dtc_10.json

@@ -0,0 +1,4 @@
+{
+    "title": "Power-Monitor Fehler",
+    "description": "Es gibt ein Problem mit dem Power-Monitoring. Die Akku-Überwachung ist ohne Funktion! Bitte Hardware prüfen"
+}

Software/data_src/static/tt_dtc/dtc_11.json

@@ -0,0 +1,4 @@
+{
+    "title": "Akku-Spannung niedrig",
+    "description": "Die Akkuspannung ist niedrig. Bitte Akku bald aufladen!"
+}

Software/data_src/static/tt_dtc/dtc_12.json

@@ -0,0 +1,4 @@
+{
+    "title": "Akku-Spannung kritisch",
+    "description": "Die Akkuspannung ist sehr niedrig. Bitte Akku umgehend ersetzen um eine schädliche Tiefentladung zu vermeiden!"
+}

Software/data_src/static/tt_dtc/dtc_13.json

@@ -0,0 +1,4 @@
+{
+    "title": "EEPROM-Migration failed",
+    "description": "Migration of EEPROM-Image from an other FW-Version failed - you need to reset everything manually!"
+}

Software/data_src/static/tt_dtc/dtc_2.json

@@ -0,0 +1,4 @@
+{
+    "title": "EEPROM CFG Checksumme",
+    "description": "Die Checksumme der Config-Partition des EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'CFG' im Menu 'Wartung' zurück"
+}

Software/data_src/static/tt_dtc/dtc_3.json

@@ -0,0 +1,4 @@
+{
+    "title": "EEPROM PDS Checksumme",
+    "description": "Die Checksumme der Betriebsdaten-Partition des EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'PDS' im Menu 'Wartung' zurück"
+}

Software/data_src/static/tt_dtc/dtc_4.json

@@ -0,0 +1,4 @@
+{
+    "title": "EEPROM PDS Adresse",
+    "description": "Die Adresse der Betriebsdaten-Partition im EEPROM ist ungültig. Setzen sie den EEPROM-Bereich 'PDS' im Menu 'Wartung' zurück"
+}

Software/data_src/static/tt_dtc/dtc_5.json

@@ -0,0 +1,4 @@
+{
+    "title": "EEPROM Version falsch",
+    "description": "Die Layout-Version des EEPROM stimmt nicht mit der Firmware-Version überein. Setzen sie den EEPROM-Bereich 'CFG' im Menu 'Wartung' zurück"
+}

Software/data_src/static/tt_dtc/dtc_6.json

@@ -0,0 +1,4 @@
+{
+    "title": "Flashstorage Fehler",
+    "description": "Der Flashstorage konnte nicht initialisiert werden. Aktualisieren sie Flash & Firmware"
+}

Software/data_src/static/tt_dtc/dtc_7.json

@@ -0,0 +1,4 @@
+{
+    "title": "Flashstorage Version falsch",
+    "description": "Die Version des Flashstorage stimmt nicht mit der Firmware-Version überein. Aktualisieren sie den Flash mit der passenden Update-Datei"
+}

Software/data_src/static/tt_dtc/dtc_8.json

@@ -0,0 +1,4 @@
+{
+    "title": "Config-Validierung",
+    "description": "Ein oder mehrer Einstellungswerte sind ausserhalb plausibler Werte. Prüfen Sie Ihre Einstellungen"
+}

Software/data_src/static/tt_dtc/dtc_9.json

@@ -0,0 +1,4 @@
+{
+    "title": "LoRa-Modul Fehler",
+    "description": "Es gibt ein Problem mit dem LoRa-Modul. Es konnte keine LoRa-Verbindung aufgebaut werden. Bitte Hardware prüfen"
+}

Software/data_src/version

@@ -0,0 +1 @@
+1.03

Software/include/common.h

@@ -0,0 +1,49 @@
+
+#ifndef _COMMON_H_
+#define _COMMON_H_
+
+#include <stdint.h>
+
+#define Q(x) #x
+#define QUOTE(x) Q(x)
+
+#define TRUE 1
+#define FALSE 0
+
+#define HOST_NAME "AirsoftTimer_%08X"
+
+#define SHUTDOWN_DELAY_MS 5000
+#define STARTUP_DELAY_MS 20000
+
+#define GPIO_LORA_TX D3
+#define GPIO_LORA_RX D4
+#define GPIO_LORA_AUX D0
+
+#define GPIO_7SEG_EN_FAC1 D7
+#define GPIO_7SEG_EN_FAC2 D6
+#define GPIO_7SEG_EN_FAC3 D5
+#define GPIO_7SEG_CLK D8
+
+#define I2C_IO_BTN_FAC1 0
+#define FAC_1_TRG_PRESSED LOW
+#define I2C_IO_BTN_FAC2 1
+#define FAC_2_TRG_PRESSED LOW
+#define I2C_IO_BTN_FAC3 2
+#define FAC_3_TRG_PRESSED LOW
+
+#define I2C_IO_LORA_M0 4
+#define I2C_IO_LORA_M1 3
+
+#define EEPROM_TYPE 24LC64
+
+#define I2C_IO_ADDRESS 0x38
+#define I2C_POWER_ADDRESS 0x40
+#define I2C_EEPROM_ADDRESS 0x50
+
+#ifndef OTA_DELAY
+#define OTA_DELAY 50 // ticks -> 10ms / tick
+#endif
+
+
+
+#endif

Software/include/debugger.h

@@ -0,0 +1,46 @@
+#ifndef _DEBUGGER_H_
+#define _DEBUGGER_H_
+
+#include <Arduino.h>
+#include "webui.h"
+
+const char PROGMEM helpCmd[] = "sysinfo     - System Info\n"
+                               "netinfo     - WiFi Info\n"
+                               "formatPDS   - Format Persistence EEPROM Data\n"
+                               "formatCFG   - Format Configuration EEPROM Data\n"
+                               "checkEE     - Check EEPROM with checksum\n"
+                               "dumpEE1k    - dump the first 1kb of EEPROM to Serial\n"
+                               "dumpEE      - dump the whole EPPROM to Serial\n"
+                               "resetPageEE - Reset the PersistenceData Page\n"
+                               "dumpCFG     - print Config struct\n"
+                               "dumpPDS     - print PersistanceStruct\n"
+                               "saveEE      - save EE-Data\n"
+                               "showdtc     - Show all DTCs\n"
+                               "dumpGlobals - print globals\n";
+
+typedef enum DebugStatus_e
+{
+    disabled,
+    enabled
+} DebugStatus_t;
+
+typedef enum DebugPorts_e
+{
+    dbg_Serial,
+    dbg_Webui,
+    dbg_cntElements
+} DebugPorts_t;
+
+const char sDebugPorts[dbg_cntElements][7] = {
+    "Serial",
+    "WebUI"};
+
+extern DebugStatus_t DebuggerStatus[dbg_cntElements];
+
+void initDebugger();
+void pushCANDebug(uint32_t id, uint8_t dlc, uint8_t *data);
+void Debug_pushMessage(const char *format, ...);
+void SetDebugportStatus(DebugPorts_t port, DebugStatus_t status);
+void Debug_Process();
+
+#endif

Software/include/dtc.h

@@ -0,0 +1,57 @@
+#ifndef _DTC_H_
+#define _DTC_H_
+
+#include <Arduino.h>
+
+#define MAX_DTC_STORAGE 12
+
+typedef enum DTCNums_e
+{
+  DTC_NO_EEPROM_FOUND = 1,
+  DTC_EEPROM_CFG_BAD,
+  DTC_EEPROM_PDS_BAD,
+  DTC_EEPROM_PDSADRESS_BAD,
+  DTC_EEPROM_VERSION_BAD,
+  DTC_FLASHFS_ERROR,
+  DTC_FLASHFS_VERSION_ERROR,
+  DTC_EEPROM_CFG_SANITY,
+  DTC_NO_LORA_FOUND,
+  DTC_NO_BATMNON_FOUND,
+  DTC_BAT_LOW,
+  DTC_BAT_CRITICAL,
+  DTC_EEPROM_MIGRATE_FAILED,
+  DTC_LAST_DTC
+} DTCNums_t;
+
+typedef enum DTCActive_e
+{
+  DTC_NONE,
+  DTC_ACTIVE,
+  DTC_PREVIOUS
+} DTCActive_t;
+
+typedef enum DTCSeverity_e
+{
+  DTC_INFO,
+  DTC_WARN,
+  DTC_CRITICAL
+} DTCSeverity_t;
+
+typedef struct DTCEntry_s
+{
+  DTCNums_t Number;
+  uint32_t timestamp;
+  DTCActive_t active;
+  DTCSeverity_t severity;
+  uint32_t debugVal;
+} DTCEntry_t;
+
+void MaintainDTC(DTCNums_t DTC_no, DTCSeverity_t DTC_severity, boolean active, uint32_t DebugValue = 0);
+void ClearDTC(DTCNums_t DTC_no);
+void ClearAllDTC();
+DTCNums_t getlastDTC(boolean only_active);
+DTCNums_t getlastDTC_Severity(boolean only_active, DTCSeverity_t severity);
+void DTC_Process();
+
+extern DTCEntry_s DTCStorage[MAX_DTC_STORAGE];
+#endif

Software/include/eeprom.h

@@ -0,0 +1,89 @@
+#ifndef _EEPROM_H_
+#define _EEPROM_H_
+
+#include <Arduino.h>
+#include <Wire.h>
+#include <I2C_eeprom.h>
+
+#include "globals.h"
+#include "dtc.h"
+#include "common.h"
+#include "debugger.h"
+
+#define I2C_EE_ADDRESS 0x50
+#define EEPROM_SIZE_BYTES I2C_DEVICESIZE_24LC64
+#define EEPROM_ENDURANCE 1000000
+
+typedef enum
+{
+  NONE,
+  FACTION_1,
+  FACTION_2,
+  FACTION_3
+} factions_t;
+
+typedef struct
+{
+  uint32_t writeCycleCounter = 0;
+  uint32_t faction_1_timer = 0;
+  uint32_t faction_2_timer = 0;
+  uint32_t faction_3_timer = 0;
+  factions_t activeFaction = NONE;
+  uint32_t checksum = 0;
+} persistenceData_t;
+
+extern persistenceData_t PersistenceData;
+typedef enum
+{
+  BATTERY_UNDEFINED,
+  BATTERY_LIPO_2S,
+  BATTERY_LIPO_3S
+} batteryType_t;
+
+const char BatteryString[][10]{
+    "Undefined",
+    "LiPo 2S",
+    "LiPo 3S"};
+
+const size_t BatteryString_Elements = sizeof(BatteryString) / sizeof(BatteryString[0]);
+
+typedef struct
+{
+  uint8_t EEPROM_Version;
+  batteryType_t batteryType;
+  bool active_faction_on_reboot;
+  char Faction_1_Name[33];
+  char Faction_2_Name[33];
+  char Faction_3_Name[33];
+  uint32_t checksum;
+} configData_t;
+
+extern configData_t ConfigData;
+
+const configData_t ConfigData_defaults = {
+    2,                      // EEPROM_Version (incerease this if anything on Layout changes!)
+    BATTERY_LIPO_3S,        // batteryType
+    false,                  // active_faction_on_reboot
+    "FACTION 1",            // Faction_1_Name
+    "FACTION 2",            // Faction_2_Name
+    "FACTION 3",            // Faction_3_Name
+    0                       // checksum
+};
+
+const uint16_t startofConfigData = 16;
+const uint16_t startofPersistence = 16 + sizeof(ConfigData) + (sizeof(ConfigData) % 16);
+
+void InitEEPROM();
+void EEPROM_Process();
+void StoreConfig_EEPROM();
+void GetConfig_EEPROM();
+void StorePersistence_EEPROM();
+void GetPersistence_EEPROM();
+void FormatConfig_EEPROM();
+void FormatPersistence_EEPROM();
+uint32_t Checksum_EEPROM(uint8_t const *data, size_t len);
+void dumpEEPROM(uint16_t memoryAddress, uint16_t length);
+void MovePersistencePage_EEPROM(boolean reset);
+uint32_t ConfigSanityCheck(bool autocorrect = false);
+
+#endif // _EEPROM_H_

Software/include/globals.h

@@ -0,0 +1,69 @@
+#ifndef _GLOBALS_H_
+#define _GLOBALS_H_
+
+#include <Arduino.h>
+
+typedef enum eSystem_Status
+{
+  sysStat_null,
+  sysStat_Startup,
+  sysStat_Normal,
+  sysStat_Error,
+  sysStat_Shutdown
+} tSystem_Status;
+
+const char sSystem_Status_txt[][9] = {
+    "Null",
+    "Startup",
+    "Normal",
+    "Error",
+    "Shutdown"
+};
+
+typedef enum eEERequest
+{
+  EE_IDLE,
+  EE_CFG_SAVE,
+  EE_CFG_LOAD,
+  EE_CFG_FORMAT,
+  EE_PDS_SAVE,
+  EE_PDS_LOAD,
+  EE_PDS_FORMAT,
+  EE_FORMAT_ALL,
+  EE_ALL_SAVE
+
+} tEERequest;
+
+typedef struct Globals_s
+{
+  char DeviceName[33];
+  char DeviceName_ID[43];
+  char FlashVersion[10];
+  tSystem_Status systemStatus = sysStat_Startup;
+  eEERequest requestEEAction = EE_IDLE;
+  uint16_t eePersistanceAdress;
+  bool hasDTC;
+  int loadvoltage_mV = 0;
+  int battery_level = 0;
+  bool timer_disabled = false;
+} Globals_t;
+
+extern Globals_t globals;
+typedef struct Constants_s
+{
+  uint8_t FW_Version_major;
+  uint8_t FW_Version_minor;
+  uint8_t Required_Flash_Version_major;
+  uint8_t Required_Flash_Version_minor;
+  char GitHash[11];
+} Constants_t;
+
+const Constants_t constants PROGMEM = {
+ 1,3,     // Firmware_Version
+ 1,3,     // Required Flash Version
+ GIT_REV  // Git-Hash-String
+};
+
+void initGlobals();
+
+#endif

Software/include/lora_messages.h

@@ -0,0 +1,30 @@
+#ifndef _LORA_MESSAGES_H_
+#define _LORA_MESSAGES_H_
+
+#define MESSAGES_VERSION 1.0
+
+#include <stdint.h>
+
+typedef char MessageType_t[8];
+typedef uint16_t NodeID_t;
+
+typedef struct
+{
+    NodeID_t nodeid;
+    uint32_t millis;
+    uint8_t faction_active;
+    uint32_t faction_1_timer;
+    uint32_t faction_2_timer;
+    uint32_t faction_3_timer;
+} __attribute__((packed)) MessageStatus_t;
+
+typedef struct
+{
+    NodeID_t nodeid;
+    bool gpsfix;
+    double latitude;
+    double longitude;
+    double altitude;
+} __attribute__((packed)) MessagePosition_t;
+
+#endif

Software/include/lora_net.h

@@ -0,0 +1,27 @@
+#ifndef _LORA_NET_H_
+#define _LORA_NET_H_
+
+#include <Arduino.h>
+
+#ifdef LORA_FEATURE_ENABLED
+#include <LoRa_E220.h>
+#elif defined(FEATURE_ENABLE_UARTLORA)
+#include <SoftwareSerial.h>
+#endif
+
+// local includes
+#include "lora_messages.h"
+#include "debugger.h"
+#include "defaults.h"
+#include "config.h"
+#include "globals.h"
+#include "dtc.h"
+#include "common.h"
+
+#define FREQUENCY_868
+
+bool InitLoRa(void (*MPinHelper)(int, int));
+void LoRa_Process();
+void sendStatus_LoRa();
+
+#endif

Software/include/oled_display.h

@@ -6,7 +6,7 @@
 #include <Adafruit_GFX.h>
 #include <Adafruit_SSD1306.h>
 #include "globals.h"
-#include "config.h"
+#include "eeprom.h"
 
 #define OLED_SDA 4
 #define OLED_SCL 15

Software/include/sanitycheck.h

@@ -0,0 +1,31 @@
+#ifndef _SANITYCHECK_H_
+#define _SANITYCHECK_H_
+
+#ifndef ADMIN_PASSWORD
+    #error "You need to define ADMIN_PASSWORD for OTA-Update"
+#endif
+
+#ifndef WIFI_AP_SSID
+    #warning "No WIFI_AP_SSID defined. Using DeviceName"
+    #define WIFI_AP_SSID DEVICE_NAME
+#endif
+
+#ifndef WIFI_AP_PASSWORD
+    #error "You must define an WIFI_AP_PASSWORD for Standalone AP-Mode"
+#endif
+
+#if defined(FEATURE_ENABLE_UARTLORA) && defined(FEATURE_ENABLE_LORA)
+    #error "You cannot enable LoRa and UART-Protocol at the same time!"
+#endif
+
+#ifdef FEATURE_ENABLE_WIFI_CLIENT
+    #ifndef WIFI_CLIENT_PASSWORD
+        #error "You must define an WIFI_PASSWORD for OTA-Update"
+    #endif
+    #ifndef WIFI_CLIENT_SSID
+        #error "You must define an WIFI_SSID for OTA-Update"
+    #endif
+#endif
+
+
+#endif //_SANITYCHECK_H_

Software/include/webui.h

@@ -0,0 +1,24 @@
+#ifndef _WEBUI_H_
+#define _WEBUI_H_
+
+#include <Arduino.h>
+#include <FS.h>
+#include <LittleFS.h>
+#include <ESPAsyncTCP.h>
+#include <ESPAsyncWebServer.h>
+#include <Updater.h>
+#include <ESP8266mDNS.h>
+#include <AsyncJson.h>
+#include <ArduinoJson.h>
+
+#include "eeprom.h"
+#include "globals.h"
+#include "dtc.h"
+#include "common.h"
+#include "debugger.h"
+
+void initWebUI();
+void Webserver_Process();
+void Websocket_PushLiveDebug(String Message);
+
+#endif

Software/lib/EByte LoRa E220 library/.gitattributes

@@ -0,0 +1 @@
+resources export-ignore

Software/lib/EByte LoRa E220 library/.piopm

@@ -0,0 +1 @@
+{"type": "library", "name": "EByte LoRa E220 library", "version": "1.0.6", "spec": {"owner": "xreef", "id": 13661, "name": "EByte LoRa E220 library", "requirements": null, "uri": null}}

Software/lib/EByte LoRa E220 library/.project

@@ -0,0 +1,11 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>LoRa_E220_Series_Library</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+	</buildSpec>
+	<natures>
+	</natures>
+</projectDescription>

Software/lib/EByte LoRa E220 library/EByte_LoRa_E220_library.h

@@ -0,0 +1,35 @@
+/*
+ * EBYTE LoRa E220 Series
+ * https://www.mischianti.org/category/my-libraries/lora-e22-devices/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Renzo Mischianti www.mischianti.org All right reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef EBYTE_LORA_E220_LIBRARY_H
+#define EBYTE_LORA_E220_LIBRARY_H
+
+#include "LoRa_E220.h"
+
+#endif
+
+#pragma once

Software/lib/EByte LoRa E220 library/LICENSE.md

@@ -0,0 +1,24 @@
+The MIT License (MIT)
+
+Copyright (c) 2017 Renzo Mischianti www.mischianti.org All right reserved.
+
+You may copy, alter and reuse this code in any way you like, but please leave
+reference to www.mischianti.org in your comments if you redistribute this code.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

Software/lib/EByte LoRa E220 library/LoRa_E220.h

@@ -0,0 +1,401 @@
+/*
+ * EBYTE LoRa E220 Series
+ *
+ * AUTHOR:  Renzo Mischianti
+ * VERSION: 1.0.6
+ *
+ * https://www.mischianti.org
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022 Renzo Mischianti www.mischianti.org All right reserved.
+ *
+ * You may copy, alter and reuse this code in any way you like, but please leave
+ * reference to www.mischianti.org in your comments if you redistribute this code.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#ifndef LoRa_E220_h
+#define LoRa_E220_h
+
+#if !defined(ARDUINO_ARCH_STM32) && !defined(ESP32) && !defined(ARDUINO_ARCH_SAMD) && !defined(ARDUINO_ARCH_MBED) && !defined(__STM32F1__) && !defined(__STM32F4__)
+	#define ACTIVATE_SOFTWARE_SERIAL
+#endif
+#if defined(ESP32)
+	#define HARDWARE_SERIAL_SELECTABLE_PIN
+#endif
+
+#ifdef ACTIVATE_SOFTWARE_SERIAL
+	#include <SoftwareSerial.h>
+#endif
+
+#include <includes/statesNaming.h>
+
+#if ARDUINO >= 100
+#include "Arduino.h"
+#else
+#include "WProgram.h"
+#endif
+
+#define MAX_SIZE_TX_PACKET 200
+
+// Uncomment to enable printing out nice debug messages.
+//#define LoRa_E220_DEBUG
+
+// Define where debug output will be printed.
+#define DEBUG_PRINTER Serial
+
+// Setup debug printing macros.
+#ifdef LoRa_E220_DEBUG
+	#define DEBUG_PRINT(...) { DEBUG_PRINTER.print(__VA_ARGS__); }
+	#define DEBUG_PRINTLN(...) { DEBUG_PRINTER.println(__VA_ARGS__); }
+#else
+	#define DEBUG_PRINT(...) {}
+	#define DEBUG_PRINTLN(...) {}
+#endif
+
+enum MODE_TYPE {
+	MODE_0_NORMAL 			= 0,
+	MODE_0_TRANSMISSION 	= 0,
+	MODE_1_WOR_TRANSMITTER 	= 1,
+	MODE_1_WOR				= 1,
+	MODE_2_WOR_RECEIVER 	= 2,
+	MODE_2_POWER_SAVING 	= 2,
+	MODE_3_CONFIGURATION 	= 3,
+	MODE_3_PROGRAM 			= 3,
+	MODE_3_SLEEP 			= 3,
+	MODE_INIT 				= 0xFF
+};
+
+enum PROGRAM_COMMAND {
+	WRITE_CFG_PWR_DWN_SAVE 	= 0xC0,
+	READ_CONFIGURATION 		= 0xC1,
+	WRITE_CFG_PWR_DWN_LOSE 	= 0xC2,
+	WRONG_FORMAT 			= 0xFF,
+	RETURNED_COMMAND 		= 0xC1,
+	SPECIAL_WIFI_CONF_COMMAND = 0xCF
+};
+
+enum REGISTER_ADDRESS {
+	REG_ADDRESS_CFG			= 0x00,
+	REG_ADDRESS_SPED 		= 0x02,
+	REG_ADDRESS_TRANS_MODE 	= 0x03,
+	REG_ADDRESS_CHANNEL 	= 0x04,
+	REG_ADDRESS_OPTION	 	= 0x05,
+	REG_ADDRESS_CRYPT	 	= 0x06,
+	REG_ADDRESS_PID		 	= 0x08
+};
+
+enum PACKET_LENGHT {
+	PL_CONFIGURATION 	= 0x08,
+
+	PL_SPED				= 0x01,
+	PL_OPTION			= 0x01,
+	PL_TRANSMISSION_MODE= 0x01,
+	PL_CHANNEL			= 0x01,
+	PL_CRYPT			= 0x02,
+	PL_PID				= 0x03
+};
+
+#pragma pack(push, 1)
+struct Speed {
+	uint8_t airDataRate :3; //bit 0-2
+	String getAirDataRateDescription() {
+		return getAirDataRateDescriptionByParams(this->airDataRate);
+	}
+
+	uint8_t uartParity :2; //bit 3-4
+	String getUARTParityDescription() {
+		return getUARTParityDescriptionByParams(this->uartParity);
+	}
+
+	uint8_t uartBaudRate :3; //bit 5-7
+	String getUARTBaudRateDescription() {
+		return getUARTBaudRateDescriptionByParams(this->uartBaudRate);
+	}
+
+};
+
+struct TransmissionMode {
+	byte WORPeriod :3; //bit 2,1,0
+	String getWORPeriodByParamsDescription() {
+		return getWORPeriodByParams(this->WORPeriod);
+	}
+	byte reserved2 :1; //bit 3
+	byte enableLBT :1; //bit 4
+	String getLBTEnableByteDescription() {
+		return getLBTEnableByteByParams(this->enableLBT);
+	}
+	byte reserved :1; //bit 5
+
+	byte fixedTransmission :1; //bit 6
+	String getFixedTransmissionDescription() {
+		return getFixedTransmissionDescriptionByParams(this->fixedTransmission);
+	}
+
+	byte enableRSSI :1; //bit 7
+	String getRSSIEnableByteDescription() {
+		return getRSSIEnableByteByParams(this->enableRSSI);
+	}
+};
+
+struct Option {
+	uint8_t transmissionPower :2; //bit 0-1
+	String getTransmissionPowerDescription() {
+		return getTransmissionPowerDescriptionByParams(this->transmissionPower);
+	}
+	uint8_t reserved :3; //bit 2-4
+
+	uint8_t RSSIAmbientNoise :1; //bit 5
+	String getRSSIAmbientNoiseEnable() {
+		return getRSSIAmbientNoiseEnableByParams(this->RSSIAmbientNoise);
+	}
+
+	uint8_t subPacketSetting :2; //bit 6-7
+	String getSubPacketSetting() {
+		return getSubPacketSettingByParams(this->subPacketSetting);
+	}
+
+};
+
+struct Crypt {
+	byte CRYPT_H = 0;
+	byte CRYPT_L = 0;
+};
+
+struct Configuration {
+	byte COMMAND = 0;
+	byte STARTING_ADDRESS = 0;
+	byte LENGHT = 0;
+
+	byte ADDH = 0;
+	byte ADDL = 0;
+
+	struct Speed SPED;
+	struct Option OPTION;
+
+	byte CHAN = 0;
+	String getChannelDescription() {
+		return String(this->CHAN + OPERATING_FREQUENCY) + F("MHz");
+	}
+
+	struct TransmissionMode TRANSMISSION_MODE;
+
+	struct Crypt CRYPT;
+};
+
+struct ModuleInformation {
+	byte COMMAND = 0;
+	byte STARTING_ADDRESS = 0;
+	byte LENGHT = 0;
+
+	byte model = 0;
+	byte version = 0;
+	byte features = 0;
+};
+
+struct ResponseStatus {
+	Status code;
+	String getResponseDescription() {
+		return getResponseDescriptionByParams(this->code);
+	}
+};
+
+struct ResponseStructContainer {
+	void *data;
+	byte rssi;
+	ResponseStatus status;
+	void close() {
+		free(this->data);
+	}
+};
+struct ResponseContainer {
+	String data;
+	byte rssi;
+	ResponseStatus status;
+};
+
+struct ConfigurationMessage
+{
+	byte specialCommand1 = 0xCF;
+	byte specialCommand2 = 0xCF;
+
+	unsigned char message[];
+};
+
+//struct FixedStransmission {
+//		byte ADDL = 0;
+//		byte ADDH = 0;
+//		byte CHAN = 0;
+//		void *message;
+//};
+#pragma pack(pop)
+
+class LoRa_E220 {
+	public:
+#ifdef ACTIVATE_SOFTWARE_SERIAL
+		LoRa_E220(byte txE220pin, byte rxE220pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
+		LoRa_E220(byte txE220pin, byte rxE220pin, byte auxPin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
+		LoRa_E220(byte txE220pin, byte rxE220pin, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
+#endif
+
+		LoRa_E220(HardwareSerial* serial, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
+		LoRa_E220(HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
+		LoRa_E220(HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
+
+#ifdef HARDWARE_SERIAL_SELECTABLE_PIN
+		LoRa_E220(byte txE220pin, byte rxE220pin, HardwareSerial* serial, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
+		LoRa_E220(byte txE220pin, byte rxE220pin, HardwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
+		LoRa_E220(byte txE220pin, byte rxE220pin, HardwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate, uint32_t serialConfig = SERIAL_8N1);
+#endif
+
+#ifdef ACTIVATE_SOFTWARE_SERIAL
+		LoRa_E220(SoftwareSerial* serial, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
+		LoRa_E220(SoftwareSerial* serial, byte auxPin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
+		LoRa_E220(SoftwareSerial* serial, byte auxPin, byte m0Pin, byte m1Pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
+#endif
+
+//		LoRa_E220(byte txE220pin, byte rxE220pin, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600, MODE_TYPE mode = MODE_0_NORMAL);
+//		LoRa_E220(HardwareSerial* serial = &Serial, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600, MODE_TYPE mode = MODE_0_NORMAL);
+//		LoRa_E220(SoftwareSerial* serial, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600, MODE_TYPE mode = MODE_0_NORMAL);
+
+		bool begin();
+        Status setMode(MODE_TYPE mode);
+        MODE_TYPE getMode();
+
+		ResponseStructContainer getConfiguration();
+		ResponseStatus setConfiguration(Configuration configuration, PROGRAM_COMMAND saveType = WRITE_CFG_PWR_DWN_LOSE);
+
+		ResponseStructContainer getModuleInformation();
+		ResponseStatus resetModule();
+
+		ResponseStatus sendMessage(const void *message, const uint8_t size);
+
+	    ResponseContainer receiveMessageUntil(char delimiter = '\0');
+		ResponseStructContainer receiveMessage(const uint8_t size);
+		ResponseStructContainer receiveMessageRSSI(const uint8_t size);
+	        
+        ResponseStructContainer receiveMessageComplete(const uint8_t size, bool enableRSSI);
+		ResponseContainer receiveMessageComplete(bool enableRSSI);
+	
+		ResponseStatus sendMessage(const String message);
+		ResponseContainer receiveMessage();
+		ResponseContainer receiveMessageRSSI();
+
+		ResponseStatus sendFixedMessage(byte ADDH, byte ADDL, byte CHAN, const String message);
+
+        ResponseStatus sendFixedMessage(byte ADDH,byte ADDL, byte CHAN, const void *message, const uint8_t size);
+        ResponseStatus sendBroadcastFixedMessage(byte CHAN, const void *message, const uint8_t size);
+        ResponseStatus sendBroadcastFixedMessage(byte CHAN, const String message);
+
+		ResponseContainer receiveInitialMessage(const uint8_t size);
+
+		ResponseStatus sendConfigurationMessage( byte ADDH,byte ADDL, byte CHAN, Configuration *configuration, PROGRAM_COMMAND programCommand = WRITE_CFG_PWR_DWN_SAVE);
+
+        int available();
+
+		void (*setMPins)(int, int);
+
+	private:
+
+		HardwareSerial* hs;
+
+#ifdef ACTIVATE_SOFTWARE_SERIAL
+		SoftwareSerial* ss;
+#endif
+
+		bool isSoftwareSerial = true;
+
+		int8_t txE220pin = -1;
+		int8_t rxE220pin = -1;
+		int8_t auxPin = -1;
+
+#ifdef HARDWARE_SERIAL_SELECTABLE_PIN
+		uint32_t serialConfig = SERIAL_8N1;
+#endif
+
+		int8_t m0Pin = -1;
+		int8_t m1Pin = -1;
+
+		unsigned long halfKeyloqKey = 0x06660708;
+		unsigned long encrypt(unsigned long data);
+		unsigned long decrypt(unsigned long data);
+
+		UART_BPS_RATE bpsRate = UART_BPS_RATE_9600;
+
+		struct NeedsStream {
+			template<typename T>
+			void begin(T &t, uint32_t baud) {
+				DEBUG_PRINTLN("Begin ");
+				t.setTimeout(500);
+				t.begin(baud);
+				stream = &t;
+			}
+
+#ifdef HARDWARE_SERIAL_SELECTABLE_PIN
+//		  template< typename T >
+//		  void begin( T &t, uint32_t baud, SerialConfig config ){
+//			  DEBUG_PRINTLN("Begin ");
+//			  t.setTimeout(500);
+//			  t.begin(baud, config);
+//			  stream = &t;
+//		  }
+//
+			template< typename T >
+			void begin( T &t, uint32_t baud, uint32_t config ) {
+				DEBUG_PRINTLN("Begin ");
+				t.setTimeout(500);
+				t.begin(baud, config);
+				stream = &t;
+			}
+
+			template< typename T >
+			void begin( T &t, uint32_t baud, uint32_t config, int8_t txE220pin, int8_t rxE220pin ) {
+				DEBUG_PRINTLN("Begin ");
+				t.setTimeout(500);
+				t.begin(baud, config, txE220pin, rxE220pin);
+				stream = &t;
+			}
+#endif
+
+			void listen() {}
+
+			Stream *stream;
+		};
+		NeedsStream serialDef;
+
+		MODE_TYPE mode = MODE_0_NORMAL;
+
+		void managedDelay(unsigned long timeout);
+		Status waitCompleteResponse(unsigned long timeout = 1000, unsigned int waitNoAux = 100);
+		void flush();
+		void cleanUARTBuffer();
+
+		Status sendStruct(void *structureManaged, uint16_t size_);
+		Status receiveStruct(void *structureManaged, uint16_t size_);
+		void writeProgramCommand(PROGRAM_COMMAND cmd, REGISTER_ADDRESS addr, PACKET_LENGHT pl);
+
+		RESPONSE_STATUS checkUARTConfiguration(MODE_TYPE mode);
+
+#ifdef LoRa_E220_DEBUG
+		void printParameters(struct Configuration *configuration);
+#endif
+};
+
+#endif

Software/lib/EByte LoRa E220 library/examples/01_getConfiguration/01_getConfiguration.ino

@@ -0,0 +1,138 @@
+/*
+ * LoRa E220
+ * Get configuration.
+ * You must uncommend the correct constructor.
+ *
+ * by Renzo Mischianti <https://www.mischianti.org>
+ *
+ * https://www.mischianti.org
+ *
+ * E220		  ----- WeMos D1 mini	----- esp32			----- Arduino Nano 33 IoT	----- Arduino MKR	----- Raspberry Pi Pico   ----- stm32               ----- ArduinoUNO
+ * M0         ----- D7 (or 3.3v)	----- 19 (or 3.3v)	----- 4 (or 3.3v)			----- 2 (or 3.3v)	----- 10 (or 3.3v)	      ----- PB0 (or 3.3v)       ----- 7 Volt div (or 3.3v)
+ * M1         ----- D6 (or 3.3v)	----- 21 (or 3.3v)	----- 6 (or 3.3v)			----- 4 (or 3.3v)	----- 11 (or 3.3v)	      ----- PB10 (or 3.3v)      ----- 6 Volt div (or 3.3v)
+ * TX         ----- D3 (PullUP)		----- TX2 (PullUP)	----- TX1 (PullUP)			----- 14 (PullUP)	----- 8 (PullUP)	      ----- PA2 TX2 (PullUP)    ----- 4 (PullUP)
+ * RX         ----- D4 (PullUP)		----- RX2 (PullUP)	----- RX1 (PullUP)			----- 13 (PullUP)	----- 9 (PullUP)	      ----- PA3 RX2 (PullUP)    ----- 5 Volt div (PullUP)
+ * AUX        ----- D5 (PullUP)		----- 18  (PullUP)	----- 2  (PullUP)			----- 0  (PullUP)	----- 2  (PullUP)	      ----- PA0  (PullUP)       ----- 3 (PullUP)
+ * VCC        ----- 3.3v/5v			----- 3.3v/5v		----- 3.3v/5v				----- 3.3v/5v		----- 3.3v/5v		      ----- 3.3v/5v             ----- 3.3v/5v
+ * GND        ----- GND				----- GND			----- GND					----- GND			----- GND			      ----- GND                 ----- GND
+ *
+ */
+
+#include "Arduino.h"
+#include "LoRa_E220.h"
+
+// ---------- esp8266 pins --------------
+//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1);  // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
+// -------------------------------------
+
+// ---------- Arduino pins --------------
+LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
+// -------------------------------------
+
+// ------------- Arduino Nano 33 IoT -------------
+// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ------------- Arduino MKR WiFi 1010 -------------
+// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ---------- esp32 pins --------------
+// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
+
+//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); //  esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
+// -------------------------------------
+
+// ---------- Raspberry PI Pico pins --------------
+// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); //  RX AUX M0 M1
+// -------------------------------------
+
+// ---------------- STM32 --------------------
+//HardwareSerial Serial2(USART2);   // PA3  (RX)  PA2  (TX)
+//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); //  RX AUX M0 M1
+// -------------------------------------------------
+
+void printParameters(struct Configuration configuration);
+void printModuleInformation(struct ModuleInformation moduleInformation);
+
+void setup() {
+	Serial.begin(9600);
+	while(!Serial){};
+	delay(500);
+
+	Serial.println();
+
+
+	// Startup all pins and UART
+	e220ttl.begin();
+
+	ResponseStructContainer c;
+	c = e220ttl.getConfiguration();
+	// It's important get configuration pointer before all other operation
+	Configuration configuration = *(Configuration*) c.data;
+	Serial.println(c.status.getResponseDescription());
+	Serial.println(c.status.code);
+
+	printParameters(configuration);
+
+	ResponseStructContainer cMi;
+	cMi = e220ttl.getModuleInformation();
+	// It's important get information pointer before all other operation
+	ModuleInformation mi = *(ModuleInformation*)cMi.data;
+
+	Serial.println(cMi.status.getResponseDescription());
+	Serial.println(cMi.status.code);
+
+	printModuleInformation(mi);
+}
+
+void loop() {
+
+}
+void printParameters(struct Configuration configuration) {
+	Serial.println("----------------------------------------");
+
+	Serial.print(F("HEAD : "));  Serial.print(configuration.COMMAND, HEX);Serial.print(" ");Serial.print(configuration.STARTING_ADDRESS, HEX);Serial.print(" ");Serial.println(configuration.LENGHT, HEX);
+	Serial.println(F(" "));
+	Serial.print(F("AddH : "));  Serial.println(configuration.ADDH, HEX);
+	Serial.print(F("AddL : "));  Serial.println(configuration.ADDL, HEX);
+	Serial.println(F(" "));
+	Serial.print(F("Chan : "));  Serial.print(configuration.CHAN, DEC); Serial.print(" -> "); Serial.println(configuration.getChannelDescription());
+	Serial.println(F(" "));
+	Serial.print(F("SpeedParityBit     : "));  Serial.print(configuration.SPED.uartParity, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getUARTParityDescription());
+	Serial.print(F("SpeedUARTDatte     : "));  Serial.print(configuration.SPED.uartBaudRate, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getUARTBaudRateDescription());
+	Serial.print(F("SpeedAirDataRate   : "));  Serial.print(configuration.SPED.airDataRate, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getAirDataRateDescription());
+	Serial.println(F(" "));
+	Serial.print(F("OptionSubPacketSett: "));  Serial.print(configuration.OPTION.subPacketSetting, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getSubPacketSetting());
+	Serial.print(F("OptionTranPower    : "));  Serial.print(configuration.OPTION.transmissionPower, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getTransmissionPowerDescription());
+	Serial.print(F("OptionRSSIAmbientNo: "));  Serial.print(configuration.OPTION.RSSIAmbientNoise, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getRSSIAmbientNoiseEnable());
+	Serial.println(F(" "));
+	Serial.print(F("TransModeWORPeriod : "));  Serial.print(configuration.TRANSMISSION_MODE.WORPeriod, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getWORPeriodByParamsDescription());
+	Serial.print(F("TransModeEnableLBT : "));  Serial.print(configuration.TRANSMISSION_MODE.enableLBT, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getLBTEnableByteDescription());
+	Serial.print(F("TransModeEnableRSSI: "));  Serial.print(configuration.TRANSMISSION_MODE.enableRSSI, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getRSSIEnableByteDescription());
+	Serial.print(F("TransModeFixedTrans: "));  Serial.print(configuration.TRANSMISSION_MODE.fixedTransmission, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getFixedTransmissionDescription());
+
+
+	Serial.println("----------------------------------------");
+}
+void printModuleInformation(struct ModuleInformation moduleInformation) {
+	Serial.println("----------------------------------------");
+	Serial.print(F("HEAD: "));  Serial.print(moduleInformation.COMMAND, HEX);Serial.print(" ");Serial.print(moduleInformation.STARTING_ADDRESS, HEX);Serial.print(" ");Serial.println(moduleInformation.LENGHT, DEC);
+
+	Serial.print(F("Model no.: "));  Serial.println(moduleInformation.model, HEX);
+	Serial.print(F("Version  : "));  Serial.println(moduleInformation.version, HEX);
+	Serial.print(F("Features : "));  Serial.println(moduleInformation.features, HEX);
+	Serial.println("----------------------------------------");
+}
+

Software/lib/EByte LoRa E220 library/examples/01_setConfiguration/01_setConfiguration.ino

@@ -0,0 +1,417 @@
+/*
+ * LoRa E220
+ * Set configuration.
+ *
+ * You must uncommend the correct constructor.
+ *
+ * by Renzo Mischianti <https://www.mischianti.org>
+ *
+ * https://www.mischianti.org
+ *
+ * E220		  ----- WeMos D1 mini	----- esp32			----- Arduino Nano 33 IoT	----- Arduino MKR	----- Raspberry Pi Pico   ----- stm32               ----- ArduinoUNO
+ * M0         ----- D7 (or 3.3v)	----- 19 (or 3.3v)	----- 4 (or 3.3v)			----- 2 (or 3.3v)	----- 10 (or 3.3v)	      ----- PB0 (or 3.3v)       ----- 7 Volt div (or 3.3v)
+ * M1         ----- D6 (or 3.3v)	----- 21 (or 3.3v)	----- 6 (or 3.3v)			----- 4 (or 3.3v)	----- 11 (or 3.3v)	      ----- PB10 (or 3.3v)      ----- 6 Volt div (or 3.3v)
+ * TX         ----- D3 (PullUP)		----- TX2 (PullUP)	----- TX1 (PullUP)			----- 14 (PullUP)	----- 8 (PullUP)	      ----- PA2 TX2 (PullUP)    ----- 4 (PullUP)
+ * RX         ----- D4 (PullUP)		----- RX2 (PullUP)	----- RX1 (PullUP)			----- 13 (PullUP)	----- 9 (PullUP)	      ----- PA3 RX2 (PullUP)    ----- 5 Volt div (PullUP)
+ * AUX        ----- D5 (PullUP)		----- 18  (PullUP)	----- 2  (PullUP)			----- 0  (PullUP)	----- 2  (PullUP)	      ----- PA0  (PullUP)       ----- 3 (PullUP)
+ * VCC        ----- 3.3v/5v			----- 3.3v/5v		----- 3.3v/5v				----- 3.3v/5v		----- 3.3v/5v		      ----- 3.3v/5v             ----- 3.3v/5v
+ * GND        ----- GND				----- GND			----- GND					----- GND			----- GND			      ----- GND                 ----- GND
+ *
+ */
+#include "Arduino.h"
+#include "LoRa_E220.h"
+
+// ---------- esp8266 pins --------------
+//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1);  // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
+// -------------------------------------
+
+// ---------- Arduino pins --------------
+LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
+// -------------------------------------
+
+// ------------- Arduino Nano 33 IoT -------------
+// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ------------- Arduino MKR WiFi 1010 -------------
+// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ---------- esp32 pins --------------
+// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
+
+//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); //  esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
+// -------------------------------------
+
+// ---------- Raspberry PI Pico pins --------------
+// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); //  RX AUX M0 M1
+// -------------------------------------
+
+// ---------------- STM32 --------------------
+//HardwareSerial Serial2(USART2);   // PA3  (RX)  PA2  (TX)
+//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); //  RX AUX M0 M1
+// -------------------------------------------------
+
+void printParameters(struct Configuration configuration);
+void printModuleInformation(struct ModuleInformation moduleInformation);
+
+void setup() {
+	Serial.begin(9600);
+	while(!Serial){};
+	delay(500);
+
+	Serial.println();
+
+
+	// Startup all pins and UART
+	e220ttl.begin();
+
+	ResponseStructContainer c;
+	c = e220ttl.getConfiguration();
+	// It's important get configuration pointer before all other operation
+	Configuration configuration = *(Configuration*) c.data;
+	Serial.println(c.status.getResponseDescription());
+	Serial.println(c.status.code);
+
+	printParameters(configuration);
+
+//	----------------------- DEFAULT TRANSPARENT -----------------------
+	configuration.ADDL = 0x03;  // First part of address
+	configuration.ADDH = 0x00; // Second part
+
+	configuration.CHAN = 23; // Communication channel
+
+	configuration.SPED.uartBaudRate = UART_BPS_9600; // Serial baud rate
+	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24; // Air baud rate
+	configuration.SPED.uartParity = MODE_00_8N1; // Parity bit
+
+	configuration.OPTION.subPacketSetting = SPS_200_00; // Packet size
+	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED; // Need to send special command
+	configuration.OPTION.transmissionPower = POWER_22; // Device power
+
+	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED; // Enable RSSI info
+	configuration.TRANSMISSION_MODE.fixedTransmission = FT_TRANSPARENT_TRANSMISSION; // Enable repeater mode
+	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED; // Check interference
+	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011; // WOR timing
+//	----------------------- DEFAULT TRANSPARENT WITH RSSI -----------------------
+//	configuration.ADDL = 0x03;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_TRANSPARENT_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//	----------------------- FIXED SENDER -----------------------
+//	configuration.ADDL = 0x02;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//
+//	----------------------- FIXED RECEIVER -----------------------
+//	configuration.ADDL = 0x03;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//	----------------------- FIXED SENDER RSSI -----------------------
+//	configuration.ADDL = 0x02;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//
+//	----------------------- FIXED RECEIVER RSSI -----------------------
+//	configuration.ADDL = 0x03;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//
+//	----------------------- WOR SENDER -----------------------
+//	configuration.ADDL = 0x02;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//
+//	----------------------- WOR RECEIVER -----------------------
+//	configuration.ADDL = 0x03;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//	----------------------- BROADCAST MESSAGE 1 -----------------------
+//	configuration.ADDL = 0x04;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//	----------------------- BROADCAST MESSAGE 2 -----------------------
+//	configuration.ADDL = 0x05;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//	----------------------- BROADCAST MESSAGE 3 -----------------------
+//	configuration.ADDL = 0x06;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//	----------------------- BROADCAST MESSAGE RSSI 1 -----------------------
+//	configuration.ADDL = 0x04;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//	----------------------- BROADCAST MESSAGE RSSI 2 -----------------------
+//	configuration.ADDL = 0x05;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//	----------------------- BROADCAST MESSAGE RSSI 3 -----------------------
+//	configuration.ADDL = 0x06;
+//	configuration.ADDH = 0x00;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+//	----------------------- MONITORING -----------------------
+//	configuration.ADDL = BROADCAST_ADDRESS;
+//	configuration.ADDH = BROADCAST_ADDRESS;
+//
+//	configuration.CHAN = 23;
+//
+//	configuration.SPED.uartBaudRate = UART_BPS_9600;
+//	configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+//	configuration.SPED.uartParity = MODE_00_8N1;
+//
+//	configuration.OPTION.subPacketSetting = SPS_200_00;
+//	configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
+//	configuration.OPTION.transmissionPower = POWER_22;
+//
+//	configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
+//	configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+//	configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
+//	configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+
+	// Set configuration changed and set to not hold the configuration
+	ResponseStatus rs = e220ttl.setConfiguration(configuration, WRITE_CFG_PWR_DWN_SAVE);
+	Serial.println(rs.getResponseDescription());
+	Serial.println(rs.code);
+
+	c = e220ttl.getConfiguration();
+	// It's important get configuration pointer before all other operation
+	configuration = *(Configuration*) c.data;
+	Serial.println(c.status.getResponseDescription());
+	Serial.println(c.status.code);
+
+	printParameters(configuration);
+	c.close();
+}
+
+void loop() {
+
+}
+void printParameters(struct Configuration configuration) {
+	DEBUG_PRINTLN("----------------------------------------");
+
+	DEBUG_PRINT(F("HEAD : "));  DEBUG_PRINT(configuration.COMMAND, HEX);DEBUG_PRINT(" ");DEBUG_PRINT(configuration.STARTING_ADDRESS, HEX);DEBUG_PRINT(" ");DEBUG_PRINTLN(configuration.LENGHT, HEX);
+	DEBUG_PRINTLN(F(" "));
+	DEBUG_PRINT(F("AddH : "));  DEBUG_PRINTLN(configuration.ADDH, HEX);
+	DEBUG_PRINT(F("AddL : "));  DEBUG_PRINTLN(configuration.ADDL, HEX);
+	DEBUG_PRINTLN(F(" "));
+	DEBUG_PRINT(F("Chan : "));  DEBUG_PRINT(configuration.CHAN, DEC); DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.getChannelDescription());
+	DEBUG_PRINTLN(F(" "));
+	DEBUG_PRINT(F("SpeedParityBit     : "));  DEBUG_PRINT(configuration.SPED.uartParity, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.SPED.getUARTParityDescription());
+	DEBUG_PRINT(F("SpeedUARTDatte     : "));  DEBUG_PRINT(configuration.SPED.uartBaudRate, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.SPED.getUARTBaudRateDescription());
+	DEBUG_PRINT(F("SpeedAirDataRate   : "));  DEBUG_PRINT(configuration.SPED.airDataRate, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.SPED.getAirDataRateDescription());
+	DEBUG_PRINTLN(F(" "));
+	DEBUG_PRINT(F("OptionSubPacketSett: "));  DEBUG_PRINT(configuration.OPTION.subPacketSetting, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.OPTION.getSubPacketSetting());
+	DEBUG_PRINT(F("OptionTranPower    : "));  DEBUG_PRINT(configuration.OPTION.transmissionPower, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.OPTION.getTransmissionPowerDescription());
+	DEBUG_PRINT(F("OptionRSSIAmbientNo: "));  DEBUG_PRINT(configuration.OPTION.RSSIAmbientNoise, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.OPTION.getRSSIAmbientNoiseEnable());
+	DEBUG_PRINTLN(F(" "));
+	DEBUG_PRINT(F("TransModeWORPeriod : "));  DEBUG_PRINT(configuration.TRANSMISSION_MODE.WORPeriod, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getWORPeriodByParamsDescription());
+	DEBUG_PRINT(F("TransModeEnableLBT : "));  DEBUG_PRINT(configuration.TRANSMISSION_MODE.enableLBT, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getLBTEnableByteDescription());
+	DEBUG_PRINT(F("TransModeEnableRSSI: "));  DEBUG_PRINT(configuration.TRANSMISSION_MODE.enableRSSI, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getRSSIEnableByteDescription());
+	DEBUG_PRINT(F("TransModeFixedTrans: "));  DEBUG_PRINT(configuration.TRANSMISSION_MODE.fixedTransmission, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getFixedTransmissionDescription());
+
+
+	DEBUG_PRINTLN("----------------------------------------");
+}
+void printModuleInformation(struct ModuleInformation moduleInformation) {
+	Serial.println("----------------------------------------");
+	DEBUG_PRINT(F("HEAD: "));  DEBUG_PRINT(moduleInformation.COMMAND, HEX);DEBUG_PRINT(" ");DEBUG_PRINT(moduleInformation.STARTING_ADDRESS, HEX);DEBUG_PRINT(" ");DEBUG_PRINTLN(moduleInformation.LENGHT, DEC);
+
+	Serial.print(F("Model no.: "));  Serial.println(moduleInformation.model, HEX);
+	Serial.print(F("Version  : "));  Serial.println(moduleInformation.version, HEX);
+	Serial.print(F("Features : "));  Serial.println(moduleInformation.features, HEX);
+	Serial.println("----------------------------------------");
+
+}

Software/lib/EByte LoRa E220 library/examples/02_sendTransparentTransmission/02_sendTransparentTransmission.ino

@@ -0,0 +1,115 @@
+/*
+ * EBYTE LoRa E220
+ * send a transparent message, you must check that the transmitter and receiver have the same
+ * CHANNEL ADDL and ADDH
+ *
+ * Pay attention e220 support RSSI, if you want use that functionality you must enable RSSI on configuration
+ * configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+ *
+ * and uncomment #define ENABLE_RSSI true in this sketch
+ *
+ * You must uncommend the correct constructor.
+ *
+ * by Renzo Mischianti <https://www.mischianti.org>
+ *
+ * https://www.mischianti.org
+ *
+ * E220		  ----- WeMos D1 mini	----- esp32			----- Arduino Nano 33 IoT	----- Arduino MKR	----- Raspberry Pi Pico   ----- stm32               ----- ArduinoUNO
+ * M0         ----- D7 (or GND) 	----- 19 (or GND) 	----- 4 (or GND) 			----- 2 (or GND) 	----- 10 (or GND)	      ----- PB0 (or GND)        ----- 7 Volt div (or GND)
+ * M1         ----- D6 (or GND) 	----- 21 (or GND) 	----- 6 (or GND) 			----- 4 (or GND) 	----- 11 (or GND)	      ----- PB10 (or GND)       ----- 6 Volt div (or GND)
+ * TX         ----- D3 (PullUP)		----- TX2 (PullUP)	----- TX1 (PullUP)			----- 14 (PullUP)	----- 8 (PullUP)	      ----- PA2 TX2 (PullUP)    ----- 4 (PullUP)
+ * RX         ----- D4 (PullUP)		----- RX2 (PullUP)	----- RX1 (PullUP)			----- 13 (PullUP)	----- 9 (PullUP)	      ----- PA3 RX2 (PullUP)    ----- 5 Volt div (PullUP)
+ * AUX        ----- D5 (PullUP)		----- 18  (PullUP)	----- 2  (PullUP)			----- 0  (PullUP)	----- 2  (PullUP)	      ----- PA0  (PullUP)       ----- 3 (PullUP)
+ * VCC        ----- 3.3v/5v			----- 3.3v/5v		----- 3.3v/5v				----- 3.3v/5v		----- 3.3v/5v		      ----- 3.3v/5v             ----- 3.3v/5v
+ * GND        ----- GND				----- GND			----- GND					----- GND			----- GND			      ----- GND                 ----- GND
+ *
+ */
+#define ENABLE_RSSI true
+
+#include "Arduino.h"
+#include "LoRa_E220.h"
+
+// ---------- esp8266 pins --------------
+//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1);  // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
+// -------------------------------------
+
+// ---------- Arduino pins --------------
+LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
+// -------------------------------------
+
+// ------------- Arduino Nano 33 IoT -------------
+// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ------------- Arduino MKR WiFi 1010 -------------
+// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ---------- esp32 pins --------------
+// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
+
+//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); //  esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
+// -------------------------------------
+
+// ---------- Raspberry PI Pico pins --------------
+// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); //  RX AUX M0 M1
+// -------------------------------------
+
+// ---------------- STM32 --------------------
+//HardwareSerial Serial2(USART2);   // PA3  (RX)  PA2  (TX)
+//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); //  RX AUX M0 M1
+// -------------------------------------------------
+void setup() {
+  Serial.begin(9600);
+  delay(500);
+
+  // Startup all pins and UART
+  e220ttl.begin();
+
+//  If you have ever change configuration you must restore It
+
+  Serial.println("Hi, I'm going to send message!");
+  // Send message
+  ResponseStatus rs = e220ttl.sendMessage("Hello, world?");
+  // Check If there is some problem of succesfully send
+  Serial.println(rs.getResponseDescription());
+}
+
+void loop() {
+	// If something available
+  if (e220ttl.available()>1) {
+	  // read the String message
+#ifdef ENABLE_RSSI
+	ResponseContainer rc = e220ttl.receiveMessageRSSI();
+#else
+	ResponseContainer rc = e220ttl.receiveMessage();
+#endif
+	// Is something goes wrong print error
+	if (rc.status.code!=1){
+		Serial.println(rc.status.getResponseDescription());
+	}else{
+		// Print the data received
+		Serial.println(rc.status.getResponseDescription());
+		Serial.println(rc.data);
+#ifdef ENABLE_RSSI
+		Serial.print("RSSI: "); Serial.println(rc.rssi, DEC);
+#endif
+	}
+  }
+  if (Serial.available()) {
+	  String input = Serial.readString();
+	  e220ttl.sendMessage(input);
+  }
+}
+

Software/lib/EByte LoRa E220 library/examples/04_sendFixedTransmission/04_sendFixedTransmission.ino

@@ -0,0 +1,168 @@
+/*
+ * EBYTE LoRa E220
+ * Send a string message to a fixed point ADDH ADDL CHAN
+ *
+ * You must configure 2 device: one as SENDER (with FIXED SENDER config) and uncomment the relative
+ * define with the correct DESTINATION_ADDL, and one as RECEIVER (with FIXED RECEIVER config)
+ * and uncomment the relative define with the correct DESTINATION_ADDL.
+ *
+ * Write a string on serial monitor or reset to resend default value.
+ *
+ * Pai attention e220 support RSSI, if you want use that functionality you must enable RSSI on configuration
+ * configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+ *
+ * and uncomment #define ENABLE_RSSI true in this sketch
+ *
+ * You must uncommend the correct constructor.
+ *
+ * by Renzo Mischianti <https://www.mischianti.org>
+ *
+ * https://www.mischianti.org
+ *
+ * E220		  ----- WeMos D1 mini	----- esp32			----- Arduino Nano 33 IoT	----- Arduino MKR	----- Raspberry Pi Pico   ----- stm32               ----- ArduinoUNO
+ * M0         ----- D7 (or GND) 	----- 19 (or GND) 	----- 4 (or GND) 			----- 2 (or GND) 	----- 10 (or GND)	      ----- PB0 (or GND)        ----- 7 Volt div (or GND)
+ * M1         ----- D6 (or GND) 	----- 21 (or GND) 	----- 6 (or GND) 			----- 4 (or GND) 	----- 11 (or GND)	      ----- PB10 (or GND)       ----- 6 Volt div (or GND)
+ * TX         ----- D3 (PullUP)		----- TX2 (PullUP)	----- TX1 (PullUP)			----- 14 (PullUP)	----- 8 (PullUP)	      ----- PA2 TX2 (PullUP)    ----- 4 (PullUP)
+ * RX         ----- D4 (PullUP)		----- RX2 (PullUP)	----- RX1 (PullUP)			----- 13 (PullUP)	----- 9 (PullUP)	      ----- PA3 RX2 (PullUP)    ----- 5 Volt div (PullUP)
+ * AUX        ----- D5 (PullUP)		----- 18  (PullUP)	----- 2  (PullUP)			----- 0  (PullUP)	----- 2  (PullUP)	      ----- PA0  (PullUP)       ----- 3 (PullUP)
+ * VCC        ----- 3.3v/5v			----- 3.3v/5v		----- 3.3v/5v				----- 3.3v/5v		----- 3.3v/5v		      ----- 3.3v/5v             ----- 3.3v/5v
+ * GND        ----- GND				----- GND			----- GND					----- GND			----- GND			      ----- GND                 ----- GND
+ *
+ */
+
+// With FIXED SENDER configuration
+// #define DESTINATION_ADDL 3
+
+// With FIXED RECEIVER configuration
+#define DESTINATION_ADDL 2
+
+// If you want use RSSI uncomment //#define ENABLE_RSSI true
+// and use relative configuration with RSSI enabled
+//#define ENABLE_RSSI true
+
+#include "Arduino.h"
+#include "LoRa_E220.h"
+
+// ---------- esp8266 pins --------------
+//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1);  // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
+// -------------------------------------
+
+// ---------- Arduino pins --------------
+LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
+// -------------------------------------
+
+// ------------- Arduino Nano 33 IoT -------------
+// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ------------- Arduino MKR WiFi 1010 -------------
+// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ---------- esp32 pins --------------
+// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
+
+//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); //  esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
+// -------------------------------------
+
+// ---------- Raspberry PI Pico pins --------------
+// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); //  RX AUX M0 M1
+// -------------------------------------
+
+// ---------------- STM32 --------------------
+//HardwareSerial Serial2(USART2);   // PA3  (RX)  PA2  (TX)
+//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); //  RX AUX M0 M1
+// -------------------------------------------------
+void printParameters(struct Configuration configuration);
+
+void setup() {
+	Serial.begin(9600);
+	delay(500);
+
+	// Startup all pins and UART
+	e220ttl.begin();
+
+	ResponseStructContainer c;
+	c = e220ttl.getConfiguration();
+	// It's important get configuration pointer before all other operation
+	Configuration configuration = *(Configuration*) c.data;
+	Serial.println(c.status.getResponseDescription());
+	Serial.println(c.status.code);
+
+	printParameters(configuration);
+	c.close();
+
+	Serial.println("Hi, I'm going to send message!");
+
+	// Send message
+	ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "Hello, world?");
+	// Check If there is some problem of succesfully send
+	Serial.println(rs.getResponseDescription());
+}
+
+void loop() {
+	// If something available
+  if (e220ttl.available()>1) {
+	  // read the String message
+#ifdef ENABLE_RSSI
+	ResponseContainer rc = e220ttl.receiveMessageRSSI();
+#else
+	ResponseContainer rc = e220ttl.receiveMessage();
+#endif
+	// Is something goes wrong print error
+	if (rc.status.code!=1){
+		Serial.println(rc.status.getResponseDescription());
+	}else{
+		// Print the data received
+		Serial.println(rc.status.getResponseDescription());
+		Serial.println(rc.data);
+#ifdef ENABLE_RSSI
+		Serial.print("RSSI: "); Serial.println(rc.rssi, DEC);
+#endif
+	}
+  }
+  if (Serial.available()) {
+		String input = Serial.readString();
+		ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, input);
+		// Check If there is some problem of succesfully send
+		Serial.println(rs.getResponseDescription());
+  }
+}
+
+
+void printParameters(struct Configuration configuration) {
+	Serial.println("----------------------------------------");
+
+	Serial.print(F("HEAD : "));  Serial.print(configuration.COMMAND, HEX);Serial.print(" ");Serial.print(configuration.STARTING_ADDRESS, HEX);Serial.print(" ");Serial.println(configuration.LENGHT, HEX);
+	Serial.println(F(" "));
+	Serial.print(F("AddH : "));  Serial.println(configuration.ADDH, HEX);
+	Serial.print(F("AddL : "));  Serial.println(configuration.ADDL, HEX);
+	Serial.println(F(" "));
+	Serial.print(F("Chan : "));  Serial.print(configuration.CHAN, DEC); Serial.print(" -> "); Serial.println(configuration.getChannelDescription());
+	Serial.println(F(" "));
+	Serial.print(F("SpeedParityBit     : "));  Serial.print(configuration.SPED.uartParity, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getUARTParityDescription());
+	Serial.print(F("SpeedUARTDatte     : "));  Serial.print(configuration.SPED.uartBaudRate, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getUARTBaudRateDescription());
+	Serial.print(F("SpeedAirDataRate   : "));  Serial.print(configuration.SPED.airDataRate, BIN);Serial.print(" -> "); Serial.println(configuration.SPED.getAirDataRateDescription());
+	Serial.println(F(" "));
+	Serial.print(F("OptionSubPacketSett: "));  Serial.print(configuration.OPTION.subPacketSetting, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getSubPacketSetting());
+	Serial.print(F("OptionTranPower    : "));  Serial.print(configuration.OPTION.transmissionPower, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getTransmissionPowerDescription());
+	Serial.print(F("OptionRSSIAmbientNo: "));  Serial.print(configuration.OPTION.RSSIAmbientNoise, BIN);Serial.print(" -> "); Serial.println(configuration.OPTION.getRSSIAmbientNoiseEnable());
+	Serial.println(F(" "));
+	Serial.print(F("TransModeWORPeriod : "));  Serial.print(configuration.TRANSMISSION_MODE.WORPeriod, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getWORPeriodByParamsDescription());
+	Serial.print(F("TransModeEnableLBT : "));  Serial.print(configuration.TRANSMISSION_MODE.enableLBT, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getLBTEnableByteDescription());
+	Serial.print(F("TransModeEnableRSSI: "));  Serial.print(configuration.TRANSMISSION_MODE.enableRSSI, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getRSSIEnableByteDescription());
+	Serial.print(F("TransModeFixedTrans: "));  Serial.print(configuration.TRANSMISSION_MODE.fixedTransmission, BIN);Serial.print(" -> "); Serial.println(configuration.TRANSMISSION_MODE.getFixedTransmissionDescription());
+
+	Serial.println("----------------------------------------");
+}

Software/lib/EByte LoRa E220 library/examples/05_sendFixedTransmissionStructure/05_sendFixedTransmissionStructure.ino

@@ -0,0 +1,149 @@
+/*
+ * EBYTE LoRa E220
+ * send a structured message to the device that have ADDH ADDL CHAN -> 0 DESTINATION_ADDL 23
+ *
+ * write the int humidity value on serial (or reset device that send default message)
+ *
+ * You must configure 2 device: one as SENDER (with FIXED SENDER config) and uncomment the relative
+ * define with the correct DESTINATION_ADDL, and one as RECEIVER (with FIXED RECEIVER config)
+ * and uncomment the relative define with the correct DESTINATION_ADDL.
+ *
+ * Write a string on serial monitor or reset to resend default value.
+ *
+ * Pay attention e220 support RSSI, if you want use that functionality you must enable RSSI on configuration
+ * configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+ *
+ * and uncomment #define ENABLE_RSSI true in this sketch
+ *
+ * You must uncommend the correct constructor and set the correct AUX_PIN define.
+ *
+ * by Renzo Mischianti <https://www.mischianti.org>
+ *
+ * https://www.mischianti.org
+ *
+ * E220		  ----- WeMos D1 mini	----- esp32			----- Arduino Nano 33 IoT	----- Arduino MKR	----- Raspberry Pi Pico   ----- stm32               ----- ArduinoUNO
+ * M0         ----- D7 (or GND) 	----- 19 (or GND) 	----- 4 (or GND) 			----- 2 (or GND) 	----- 10 (or GND)	      ----- PB0 (or GND)        ----- 7 Volt div (or GND)
+ * M1         ----- D6 (or GND) 	----- 21 (or GND) 	----- 6 (or GND) 			----- 4 (or GND) 	----- 11 (or GND)	      ----- PB10 (or GND)       ----- 6 Volt div (or GND)
+ * TX         ----- D3 (PullUP)		----- TX2 (PullUP)	----- TX1 (PullUP)			----- 14 (PullUP)	----- 8 (PullUP)	      ----- PA2 TX2 (PullUP)    ----- 4 (PullUP)
+ * RX         ----- D4 (PullUP)		----- RX2 (PullUP)	----- RX1 (PullUP)			----- 13 (PullUP)	----- 9 (PullUP)	      ----- PA3 RX2 (PullUP)    ----- 5 Volt div (PullUP)
+ * AUX        ----- D5 (PullUP)		----- 18  (PullUP)	----- 2  (PullUP)			----- 0  (PullUP)	----- 2  (PullUP)	      ----- PA0  (PullUP)       ----- 3 (PullUP)
+ * VCC        ----- 3.3v/5v			----- 3.3v/5v		----- 3.3v/5v				----- 3.3v/5v		----- 3.3v/5v		      ----- 3.3v/5v             ----- 3.3v/5v
+ * GND        ----- GND				----- GND			----- GND					----- GND			----- GND			      ----- GND                 ----- GND
+ *
+ */
+
+// With FIXED SENDER configuration
+#define DESTINATION_ADDL 3
+#define ROOM "Kitchen"
+
+// With FIXED RECEIVER configuration
+//#define DESTINATION_ADDL 2
+//#define ROOM "Bath"
+
+// If you want use RSSI uncomment //#define ENABLE_RSSI true
+// and use relative configuration with RSSI enabled
+// #define ENABLE_RSSI true
+
+#include "Arduino.h"
+#include "LoRa_E220.h"
+
+// ---------- esp8266 pins --------------
+//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1);  // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
+// -------------------------------------
+
+// ---------- Arduino pins --------------
+//LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
+// -------------------------------------
+
+// ------------- Arduino Nano 33 IoT -------------
+// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ------------- Arduino MKR WiFi 1010 -------------
+// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ---------- esp32 pins --------------
+ LoRa_E220 e220ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
+
+//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); //  esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
+// -------------------------------------
+
+// ---------- Raspberry PI Pico pins --------------
+// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); //  RX AUX M0 M1
+// -------------------------------------
+
+// ---------------- STM32 --------------------
+//HardwareSerial Serial2(USART2);   // PA3  (RX)  PA2  (TX)
+//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); //  RX AUX M0 M1
+// -------------------------------------------------
+struct Message {
+	char type[5];
+	char message[8];
+	float temperature;
+};
+
+void setup() {
+  Serial.begin(9600);
+  delay(500);
+
+  // Startup all pins and UART
+  e220ttl.begin();
+
+  Serial.println("Hi, I'm going to send message!");
+
+  struct	Message message = {"TEMP", ROOM, 19.2};
+
+  // Send message
+  ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &message, sizeof(Message));
+  // Check If there is some problem of succesfully send
+  Serial.println(rs.getResponseDescription());
+}
+
+void loop() {
+	// If something available
+  if (e220ttl.available()>1) {
+	  // read the String message
+#ifdef ENABLE_RSSI
+		ResponseStructContainer rsc = e220ttl.receiveMessageRSSI(sizeof(Message));
+#else
+		ResponseStructContainer rsc = e220ttl.receiveMessage(sizeof(Message));
+#endif
+
+	// Is something goes wrong print error
+	if (rsc.status.code!=1){
+		Serial.println(rsc.status.getResponseDescription());
+	}else{
+		// Print the data received
+		Serial.println(rsc.status.getResponseDescription());
+		struct Message message = *(Message*) rsc.data;
+		Serial.println(message.type);
+		Serial.println(message.message);
+		Serial.println(message.temperature);
+
+#ifdef ENABLE_RSSI
+		Serial.print("RSSI: "); Serial.println(rsc.rssi, DEC);
+#endif
+	}
+  }
+  if (Serial.available()) {
+	  struct Message message = { "TEMP", ROOM, 0 };
+	  message.temperature = Serial.parseFloat();
+
+	  // Send message
+	  ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &message, sizeof(Message));
+	  // Check If there is some problem of succesfully send
+	  Serial.println(rs.getResponseDescription());
+  }
+}

Software/lib/EByte LoRa E220 library/examples/05_sendFixedTransmissionStructureReadPartial/05_sendFixedTransmissionStructureReadPartial.ino

@@ -0,0 +1,188 @@
+/*
+ * EBYTE LoRa E220
+ * send a structured message to the device that have ADDH ADDL CHAN -> 0 DESTINATION_ADDL 23
+ *
+ * The receiver read the first part of the packet and undestand the type.
+ * If the type is HUMI read the message and the humidity as int
+ * else read the temperature as float.
+ * I use byte array because some microcontroller can have different size for float
+ *
+ * You must configure 2 device: one as SENDER (with FIXED SENDER config) and uncomment the relative
+ * define with the correct DESTINATION_ADDL, and one as RECEIVER (with FIXED RECEIVER config)
+ * and uncomment the relative define with the correct DESTINATION_ADDL.
+ *
+ * Write a string on serial monitor or reset to resend default value.
+ *
+ * You must uncommend the correct constructor and set the correct AUX_PIN define.
+ *
+ * by Renzo Mischianti <https://www.mischianti.org>
+ *
+ * https://www.mischianti.org
+ *
+ * E220		  ----- WeMos D1 mini	----- esp32			----- Arduino Nano 33 IoT	----- Arduino MKR	----- Raspberry Pi Pico   ----- stm32               ----- ArduinoUNO
+ * M0         ----- D7 (or GND) 	----- 19 (or GND) 	----- 4 (or GND) 			----- 2 (or GND) 	----- 10 (or GND)	      ----- PB0 (or GND)        ----- 7 Volt div (or GND)
+ * M1         ----- D6 (or GND) 	----- 21 (or GND) 	----- 6 (or GND) 			----- 4 (or GND) 	----- 11 (or GND)	      ----- PB10 (or GND)       ----- 6 Volt div (or GND)
+ * TX         ----- D3 (PullUP)		----- TX2 (PullUP)	----- TX1 (PullUP)			----- 14 (PullUP)	----- 8 (PullUP)	      ----- PA2 TX2 (PullUP)    ----- 4 (PullUP)
+ * RX         ----- D4 (PullUP)		----- RX2 (PullUP)	----- RX1 (PullUP)			----- 13 (PullUP)	----- 9 (PullUP)	      ----- PA3 RX2 (PullUP)    ----- 5 Volt div (PullUP)
+ * AUX        ----- D5 (PullUP)		----- 18  (PullUP)	----- 2  (PullUP)			----- 0  (PullUP)	----- 2  (PullUP)	      ----- PA0  (PullUP)       ----- 3 (PullUP)
+ * VCC        ----- 3.3v/5v			----- 3.3v/5v		----- 3.3v/5v				----- 3.3v/5v		----- 3.3v/5v		      ----- 3.3v/5v             ----- 3.3v/5v
+ * GND        ----- GND				----- GND			----- GND					----- GND			----- GND			      ----- GND                 ----- GND
+ *
+ */
+
+#define MESSAGE_TYPE "HUMI"
+
+// With FIXED SENDER configuration
+//#define DESTINATION_ADDL 3
+//#define ROOM "Kitchen"
+
+// With FIXED RECEIVER configuration
+#define DESTINATION_ADDL 2
+#define ROOM "Bathroo"
+
+// If you want use RSSI uncomment //#define ENABLE_RSSI true
+// and use relative configuration with RSSI enabled
+// #define ENABLE_RSSI true
+
+#include "Arduino.h"
+#include "LoRa_E220.h"
+
+// ---------- esp8266 pins --------------
+//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1);  // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
+// -------------------------------------
+
+// ---------- Arduino pins --------------
+//LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
+// -------------------------------------
+
+// ------------- Arduino Nano 33 IoT -------------
+// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ------------- Arduino MKR WiFi 1010 -------------
+ LoRa_E220 e220ttl(&Serial1, 0, 2, 4); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ---------- esp32 pins --------------
+// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
+
+//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); //  esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
+// -------------------------------------
+
+// ---------- Raspberry PI Pico pins --------------
+// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); //  RX AUX M0 M1
+// -------------------------------------
+
+// ---------------- STM32 --------------------
+//HardwareSerial Serial2(USART2);   // PA3  (RX)  PA2  (TX)
+//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); //  RX AUX M0 M1
+// -------------------------------------------------
+struct MessageTemperature {
+	char type[5];
+	char message[8];
+	byte temperature[4];
+};
+
+struct MessageHumidity {
+	char type[5];
+	char message[8];
+	byte humidity;
+};
+
+void setup() {
+	Serial.begin(9600);
+	delay(500);
+
+	// Startup all pins and UART
+	e220ttl.begin();
+
+	Serial.println("Hi, I'm going to send message!");
+
+	struct MessageHumidity message = { "HUMI", ROOM, 80 };
+	// Send message
+	ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &message, sizeof(MessageHumidity));
+	// Check If there is some problem of succesfully send
+	Serial.println(rs.getResponseDescription());
+
+	struct MessageTemperature messageT = { "TEMP", ROOM, 0 };
+	*(float*)(messageT.temperature) = 19.2;
+
+	// Send message
+	ResponseStatus rsT = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &messageT, sizeof(MessageTemperature));
+	// Check If there is some problem of succesfully send
+	Serial.println(rsT.getResponseDescription());
+}
+
+void loop() {
+	// If something available
+	if (e220ttl.available() > 1) {
+		// read the String message
+		char type[5]; // first part of structure
+		ResponseContainer rs = e220ttl.receiveInitialMessage(sizeof(type));
+		String typeStr = rs.data;
+
+		// Is something goes wrong print error
+		if (rs.status.code != 1) {
+			Serial.println(rs.status.getResponseDescription());
+		} else {
+			Serial.println(typeStr);
+			if (typeStr == "TEMP") {
+				struct MessageTemperaturePartial {
+					char message[8];
+					byte temperature[4];
+				};
+
+				ResponseStructContainer rsc = e220ttl.receiveMessage( sizeof(MessageTemperaturePartial));
+				struct MessageTemperaturePartial message = *(MessageTemperaturePartial*) rsc.data;
+
+				Serial.println(*(float*)(message.temperature));
+				Serial.println(message.message);
+				rsc.close();
+			} else if (typeStr == "HUMI") {
+				struct MessageHumidityPartial {
+					char message[8];
+					byte humidity;
+				};
+
+				ResponseStructContainer rsc = e220ttl.receiveMessage(sizeof(MessageHumidityPartial));
+				struct MessageHumidityPartial message = *(MessageHumidityPartial*) rsc.data;
+
+				Serial.println(message.humidity);
+				Serial.println(message.message);
+				rsc.close();
+			} else {
+				Serial.println("Something goes wrong!!");
+			}
+		}
+	}
+ 	if (Serial.available()) {
+ 		if (MESSAGE_TYPE == "HUMI") {
+ 			struct MessageHumidity message = { "HUMI", ROOM, 0 };
+ 			message.humidity = Serial.parseInt();
+
+ 	 		// Send message
+ 	 		ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &message, sizeof(MessageHumidity));
+ 	 		// Check If there is some problem of succesfully send
+ 	 		Serial.println(rs.getResponseDescription());
+ 		} else {
+ 			struct MessageTemperature message = { "TEMP", ROOM, 0 };
+ 			*(float*)(message.temperature) = Serial.parseFloat();
+
+ 	 		// Send message
+ 	 		ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, &message, sizeof(MessageTemperature));
+ 	 		// Check If there is some problem of succesfully send
+ 	 		Serial.println(rs.getResponseDescription());
+ 		}
+ 	}
+}

Software/lib/EByte LoRa E220 library/examples/06_sendWORMessage/06_sendWORMessage.ino

@@ -0,0 +1,111 @@
+/*
+ * EBYTE LoRa E220
+ * Send wake up WOR message to a device in Sleep (WOR transmitter)
+ *
+ * You must configure the address with 0 3 23 (FIXED SENDER configuration)
+ * and pay attention that WOR period must be the same of receiver
+ *
+ * by Renzo Mischianti <https://www.mischianti.org>
+ *
+ * https://www.mischianti.org
+ *
+ * E220		  ----- WeMos D1 mini	----- esp32			----- Arduino Nano 33 IoT	----- Arduino MKR	----- Raspberry Pi Pico   ----- stm32               ----- ArduinoUNO
+ * M0         ----- D7 (or 3.3v)	----- 19 (or 3.3v)	----- 4 (or 3.3v)			----- 2 (or 3.3v)	----- 10 (or 3.3v)	      ----- PB0 (or 3.3v)        ----- 7 Volt div (or 3.3v)
+ * M1         ----- D6 (or GND)		----- 21 (or GND)	----- 6 (or GND)			----- 4 (or GND)	----- 11 (or GND)	      ----- PB10 (or GND)       ----- 6 Volt div (or GND)
+ * TX         ----- D3 (PullUP)		----- TX2 (PullUP)	----- TX1 (PullUP)			----- 14 (PullUP)	----- 8 (PullUP)	      ----- PA2 TX2 (PullUP)    ----- 4 (PullUP)
+ * RX         ----- D4 (PullUP)		----- RX2 (PullUP)	----- RX1 (PullUP)			----- 13 (PullUP)	----- 9 (PullUP)	      ----- PA3 RX2 (PullUP)    ----- 5 Volt div (PullUP)
+ * AUX        ----- D5 (PullUP)		----- 18  (PullUP)	----- 2  (PullUP)			----- 0  (PullUP)	----- 2  (PullUP)	      ----- PA0  (PullUP)       ----- 3 (PullUP)
+ * VCC        ----- 3.3v/5v			----- 3.3v/5v		----- 3.3v/5v				----- 3.3v/5v		----- 3.3v/5v		      ----- 3.3v/5v             ----- 3.3v/5v
+ * GND        ----- GND				----- GND			----- GND					----- GND			----- GND			      ----- GND                 ----- GND
+ *
+ */
+
+// With FIXED SENDER configuration
+#define DESTINATION_ADDL 3
+
+#include "Arduino.h"
+#include "LoRa_E220.h"
+
+// ---------- esp8266 pins --------------
+//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1);  // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
+// -------------------------------------
+
+// ---------- Arduino pins --------------
+LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
+// -------------------------------------
+
+// ------------- Arduino Nano 33 IoT -------------
+// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ------------- Arduino MKR WiFi 1010 -------------
+// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ---------- esp32 pins --------------
+// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
+
+//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); //  esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
+// -------------------------------------
+
+// ---------- Raspberry PI Pico pins --------------
+// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); //  RX AUX M0 M1
+// -------------------------------------
+
+// ---------------- STM32 --------------------
+//HardwareSerial Serial2(USART2);   // PA3  (RX)  PA2  (TX)
+//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); //  RX AUX M0 M1
+// -------------------------------------------------
+void setup() {
+  Serial.begin(9600);
+  delay(500);
+
+  // Startup all pins and UART
+  e220ttl.begin();
+
+
+  e220ttl.setMode(MODE_1_WOR_TRANSMITTER);
+
+  Serial.println("Hi, I'm going to send WOR message!");
+
+  // Send message
+  ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "Hello, world? WOR!");
+  // Check If there is some problem of succesfully send
+  Serial.println(rs.getResponseDescription());
+
+//  e220ttl.setMode(MODE_0_NORMAL);
+}
+
+void loop() {
+	// If something available
+  if (e220ttl.available()>1) {
+	  // read the String message
+	ResponseContainer rc = e220ttl.receiveMessage();
+	// Is something goes wrong print error
+	if (rc.status.code!=1){
+		Serial.println(rc.status.getResponseDescription());
+	}else{
+		// Print the data received
+		Serial.println(rc.status.getResponseDescription());
+		Serial.println(rc.data);
+	}
+  }
+  if (Serial.available()) {
+	String input = Serial.readString();
+	ResponseStatus rs = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, input);
+	// Check If there is some problem of succesfully send
+	Serial.println(rs.getResponseDescription());
+  }
+}
+

Software/lib/EByte LoRa E220 library/examples/06_wakeUPLoRaFromWOR/06_wakeUPLoRaFromWOR.ino

@@ -0,0 +1,137 @@
+/*
+ * EBYTE LoRa E220
+ * Stay in sleep mode and wait a wake up WOR message
+ *
+ * You must configure the address with 0 2 23 (FIXED RECEIVER configuration)
+ * and pay attention that WOR period must be the same of sender
+ *
+ * You must uncommend the correct constructor and set the correct AUX_PIN define.
+ *
+ * by Renzo Mischianti <https://www.mischianti.org>
+ *
+ * https://www.mischianti.org
+ *
+ * E220		  ----- WeMos D1 mini	----- esp32			----- Arduino Nano 33 IoT	----- Arduino MKR	----- stm32               ----- ArduinoUNO
+ * M0         ----- D7 (or GND)		----- 19 (or GND)	----- 4 (or GND)			----- 2 (or GND)	----- PB0 (or GND)        ----- 7 Volt div (or GND)
+ * M1         ----- D6 (or 3.3v)	----- 21 (or 3.3v)	----- 6 (or 3.3v)			----- 4 (or 3.3v)	----- PB10 (or 3.3v)      ----- 6 Volt div (or 3.3v)
+ * TX         ----- D3 (PullUP)		----- TX2 (PullUP)	----- TX1 (PullUP)			----- 14 (PullUP)	----- PA2 TX2 (PullUP)    ----- 4 (PullUP)
+ * RX         ----- D4 (PullUP)		----- RX2 (PullUP)	----- RX1 (PullUP)			----- 13 (PullUP)	----- PA3 RX2 (PullUP)    ----- 5 Volt div (PullUP)
+ * AUX        ----- D5 (PullUP)		----- 18  (PullUP)	----- 2  (PullUP)			----- 0  (PullUP)	----- PA0  (PullUP)       ----- 3 (PullUP)
+ * VCC        ----- 3.3v/5v			----- 3.3v/5v		----- 3.3v/5v				----- 3.3v/5v		----- 3.3v/5v             ----- 3.3v/5v
+ * GND        ----- GND				----- GND			----- GND					----- GND			----- GND                 ----- GND
+ *
+ */
+
+// With FIXED RECEIVER configuration
+#define DESTINATION_ADDL 2
+
+#define AUX_PIN 15
+
+#include "Arduino.h"
+#include "LoRa_E220.h"
+
+// ---------- esp8266 pins --------------
+//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1);  // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
+// -------------------------------------
+
+// ---------- Arduino pins --------------
+LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
+// -------------------------------------
+
+// ------------- Arduino Nano 33 IoT -------------
+// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ------------- Arduino MKR WiFi 1010 -------------
+// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ---------- esp32 pins --------------
+// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
+
+//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); //  esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
+// -------------------------------------
+
+// ---------------- STM32 --------------------
+//HardwareSerial Serial2(USART2);   // PA3  (RX)  PA2  (TX)
+//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); //  RX AUX M0 M1
+// -------------------------------------------------
+
+ bool interruptExecuted = false;
+#ifdef ESP32
+ void IRAM_ATTR wakeUp() {
+	 // Do not use Serial on interrupt callback
+	 interruptExecuted = true;
+	 detachInterrupt(AUX_PIN);
+ }
+#elif define(ESP8266)
+ ICACHE_RAM_ATTR void wakeUp() {
+	 // Do not use Serial on interrupt callback
+	 interruptExecuted = true;
+	 detachInterrupt(AUX_PIN);
+ }
+#else
+ void wakeUp() {
+ 	 // Do not use Serial on interrupt callback
+ 	 interruptExecuted = true;
+ 	 detachInterrupt(AUX_PIN);
+  }
+#endif
+
+//The setup function is called once at startup of the sketch
+void setup() {
+	Serial.begin(9600);
+	while (!Serial) {
+		; // wait for serial port to connect. Needed for native USB
+	}
+	delay(100);
+
+	e220ttl.begin();
+
+	e220ttl.setMode(MODE_2_WOR_RECEIVER);
+
+	delay(1000);
+	Serial.println();
+	Serial.println("Start sleep!");
+	delay(100);
+    attachInterrupt(AUX_PIN, wakeUp, FALLING);
+}
+
+// The loop function is called in an endless loop
+void loop() {
+	if (e220ttl.available() > 1) {
+		Serial.println("Message arrived!");
+		ResponseContainer rs = e220ttl.receiveMessage();
+		// First of all get the data
+		String message = rs.data;
+
+		Serial.println(rs.status.getResponseDescription());
+		Serial.println(message);
+
+		// Work only with full connection
+		e220ttl.setMode(MODE_0_NORMAL);
+
+		delay(1000);
+
+		ResponseStatus rsSend = e220ttl.sendFixedMessage(0, DESTINATION_ADDL, 23, "We have received the message!");
+		// Check If there is some problem of succesfully send
+		Serial.println(rsSend.getResponseDescription());
+	}
+
+	if(interruptExecuted) {
+		Serial.println("WakeUp Callback, AUX pin go LOW and start receive message!");
+		Serial.flush();
+		interruptExecuted = false;
+	}
+}

Software/lib/EByte LoRa E220 library/examples/07_receiveMessages/07_receiveMessages.ino

@@ -0,0 +1,105 @@
+/*
+ * EBYTE LoRa E220
+ *
+ * Receive messages on CHANNEL 23
+ * Uncomment #define ENABLE_RSSI true in this sketch
+ * if the sender send RSSI also
+ *
+ * by Renzo Mischianti <https://www.mischianti.org>
+ *
+ * https://www.mischianti.org
+ *
+ * E220		  ----- WeMos D1 mini	----- esp32			----- Arduino Nano 33 IoT	----- Arduino MKR	----- Raspberry Pi Pico   ----- stm32               ----- ArduinoUNO
+ * M0         ----- D7 (or GND) 	----- 19 (or GND) 	----- 4 (or GND) 			----- 2 (or GND) 	----- 10 (or GND)	      ----- PB0 (or GND)        ----- 7 Volt div (or GND)
+ * M1         ----- D6 (or GND) 	----- 21 (or GND) 	----- 6 (or GND) 			----- 4 (or GND) 	----- 11 (or GND)	      ----- PB10 (or GND)       ----- 6 Volt div (or GND)
+ * TX         ----- D3 (PullUP)		----- TX2 (PullUP)	----- TX1 (PullUP)			----- 14 (PullUP)	----- 8 (PullUP)	      ----- PA2 TX2 (PullUP)    ----- 4 (PullUP)
+ * RX         ----- D4 (PullUP)		----- RX2 (PullUP)	----- RX1 (PullUP)			----- 13 (PullUP)	----- 9 (PullUP)	      ----- PA3 RX2 (PullUP)    ----- 5 Volt div (PullUP)
+ * AUX        ----- D5 (PullUP)		----- 18  (PullUP)	----- 2  (PullUP)			----- 0  (PullUP)	----- 2  (PullUP)	      ----- PA0  (PullUP)       ----- 3 (PullUP)
+ * VCC        ----- 3.3v/5v			----- 3.3v/5v		----- 3.3v/5v				----- 3.3v/5v		----- 3.3v/5v		      ----- 3.3v/5v             ----- 3.3v/5v
+ * GND        ----- GND				----- GND			----- GND					----- GND			----- GND			      ----- GND                 ----- GND
+ *
+ */
+
+// If you want use RSSI uncomment
+//#define ENABLE_RSSI true
+
+#include "Arduino.h"
+#include "LoRa_E220.h"
+
+// ---------- esp8266 pins --------------
+//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1);  // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
+// -------------------------------------
+
+// ---------- Arduino pins --------------
+//LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
+// -------------------------------------
+
+// ------------- Arduino Nano 33 IoT -------------
+// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ------------- Arduino MKR WiFi 1010 -------------
+// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ---------- esp32 pins --------------
+// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
+
+//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); //  esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
+// -------------------------------------
+
+// ---------- Raspberry PI Pico pins --------------
+// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); //  RX AUX M0 M1
+// -------------------------------------
+
+// ---------------- STM32 --------------------
+//HardwareSerial Serial2(USART2);   // PA3  (RX)  PA2  (TX)
+//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); //  RX AUX M0 M1
+// -------------------------------------------------
+
+void setup() {
+  Serial.begin(9600);
+  delay(500);
+
+  // Startup all pins and UART
+  e220ttl.begin();
+
+  Serial.println("Start receiving!");
+}
+
+void loop() {
+	// If something available
+  if (e220ttl.available()>1) {
+	  Serial.println("Message received!");
+
+	  // read the String message
+#ifdef ENABLE_RSSI
+	ResponseContainer rc = e220ttl.receiveMessageRSSI();
+#else
+	ResponseContainer rc = e220ttl.receiveMessage();
+#endif
+	// Is something goes wrong print error
+	if (rc.status.code!=1){
+		Serial.println(rc.status.getResponseDescription());
+	}else{
+		// Print the data received
+		Serial.println(rc.status.getResponseDescription());
+		Serial.println(rc.data);
+#ifdef ENABLE_RSSI
+		Serial.print("RSSI: "); Serial.println(rc.rssi, DEC);
+#endif
+	}
+  }
+}
+

Software/lib/EByte LoRa E220 library/examples/07_sendBroadcastMessage/07_sendBroadcastMessage.ino

@@ -0,0 +1,128 @@
+/*
+ * EBYTE LoRa E220
+ *
+ * Send a string message to all devices of the Channel CHAN 23
+ *
+ * Write a string on serial monitor or reset to send the string to all device on channel 23.
+ *
+ * Send a fixed message, you must check that the transmitter and receiver have different
+ * ADDL or ADDH, check the configuration down
+ *
+ * For the test you can use
+ *  - BROADCAST MESSAGE 1
+ *  - BROADCAST MESSAGE 2
+ *  - BROADCAST MESSAGE 3
+ *
+ * Pai attention e220 support RSSI, if you want use that functionality you must enable RSSI on configuration
+ * configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+ *
+ * and uncomment #define ENABLE_RSSI true in this sketch
+ *
+ * by Renzo Mischianti <https://www.mischianti.org>
+ *
+ * https://www.mischianti.org
+ *
+ * E220		  ----- WeMos D1 mini	----- esp32			----- Arduino Nano 33 IoT	----- Arduino MKR	----- Raspberry Pi Pico   ----- stm32               ----- ArduinoUNO
+ * M0         ----- D7 (or GND) 	----- 19 (or GND) 	----- 4 (or GND) 			----- 2 (or GND) 	----- 10 (or GND)	      ----- PB0 (or GND)        ----- 7 Volt div (or GND)
+ * M1         ----- D6 (or GND) 	----- 21 (or GND) 	----- 6 (or GND) 			----- 4 (or GND) 	----- 11 (or GND)	      ----- PB10 (or GND)       ----- 6 Volt div (or GND)
+ * TX         ----- D3 (PullUP)		----- TX2 (PullUP)	----- TX1 (PullUP)			----- 14 (PullUP)	----- 8 (PullUP)	      ----- PA2 TX2 (PullUP)    ----- 4 (PullUP)
+ * RX         ----- D4 (PullUP)		----- RX2 (PullUP)	----- RX1 (PullUP)			----- 13 (PullUP)	----- 9 (PullUP)	      ----- PA3 RX2 (PullUP)    ----- 5 Volt div (PullUP)
+ * AUX        ----- D5 (PullUP)		----- 18  (PullUP)	----- 2  (PullUP)			----- 0  (PullUP)	----- 2  (PullUP)	      ----- PA0  (PullUP)       ----- 3 (PullUP)
+ * VCC        ----- 3.3v/5v			----- 3.3v/5v		----- 3.3v/5v				----- 3.3v/5v		----- 3.3v/5v		      ----- 3.3v/5v             ----- 3.3v/5v
+ * GND        ----- GND				----- GND			----- GND					----- GND			----- GND			      ----- GND                 ----- GND
+ *
+ */
+
+// If you want use RSSI uncomment //#define ENABLE_RSSI true
+// and use relative configuration with RSSI enabled
+//#define ENABLE_RSSI true
+
+#include "Arduino.h"
+#include "LoRa_E220.h"
+
+// ---------- esp8266 pins --------------
+//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1);  // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
+// -------------------------------------
+
+// ---------- Arduino pins --------------
+//LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
+
+//#include <SoftwareSerial.h>
+//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
+//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
+// -------------------------------------
+
+// ------------- Arduino Nano 33 IoT -------------
+// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ------------- Arduino MKR WiFi 1010 -------------
+// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); //  RX AUX M0 M1
+// -------------------------------------------------
+
+// ---------- esp32 pins --------------
+// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); //  RX AUX M0 M1
+
+//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); //  esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
+// -------------------------------------
+
+// ---------- Raspberry PI Pico pins --------------
+// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); //  RX AUX M0 M1
+// -------------------------------------
+
+// ---------------- STM32 --------------------
+//HardwareSerial Serial2(USART2);   // PA3  (RX)  PA2  (TX)
+//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); //  RX AUX M0 M1
+// -------------------------------------------------
+
+void setup() {
+  Serial.begin(9600);
+  delay(500);
+
+  // Startup all pins and UART
+  e220ttl.begin();
+
+  Serial.println("Hi, I'm going to send message!");
+
+  // Send message
+  ResponseStatus rs = e220ttl.sendBroadcastFixedMessage(23, "Hello, world?");
+  // Check If there is some problem of succesfully send
+  Serial.println(rs.getResponseDescription());
+}
+
+void loop() {
+	// If something available
+  if (e220ttl.available()>1) {
+	  // read the String message
+#ifdef ENABLE_RSSI
+	ResponseContainer rc = e220ttl.receiveMessageRSSI();
+#else
+	ResponseContainer rc = e220ttl.receiveMessage();
+#endif
+	// Is something goes wrong print error
+	if (rc.status.code!=1){
+		Serial.println(rc.status.getResponseDescription());
+	}else{
+		// Print the data received
+		Serial.println(rc.status.getResponseDescription());
+		Serial.println(rc.data);
+#ifdef ENABLE_RSSI
+		Serial.print("RSSI: "); Serial.println(rc.rssi, DEC);
+#endif
+	}
+  }
+  if (Serial.available()) {
+	  String input = Serial.readString();
+	  ResponseStatus rs = e220ttl.sendBroadcastFixedMessage(23, input);
+	  // Check If there is some problem of succesfully send
+	  Serial.println(rs.getResponseDescription());
+  }
+}
+

Software/lib/EByte LoRa E220 library/includes/statesNaming.h

@@ -0,0 +1,461 @@
+#include "Arduino.h"
+
+#ifdef FREQUENCY_433
+	#define OPERATING_FREQUENCY 410
+#elif defined(FREQUENCY_400)
+	#define OPERATING_FREQUENCY 410
+#elif defined(FREQUENCY_230)
+	#define OPERATING_FREQUENCY 220
+#elif defined(FREQUENCY_868)
+	#define OPERATING_FREQUENCY 850
+#elif defined(FREQUENCY_915)
+	#define OPERATING_FREQUENCY 850
+#else
+	#define OPERATING_FREQUENCY 410
+#endif
+
+#define BROADCAST_ADDRESS 255
+
+typedef enum RESPONSE_STATUS {
+#ifndef ARDUINO_ARCH_STM32
+  SUCCESS = 1,
+#endif
+  E220_SUCCESS = 1,
+  ERR_E220_UNKNOWN,	/* something shouldn't happened */
+  ERR_E220_NOT_SUPPORT,
+  ERR_E220_NOT_IMPLEMENT,
+  ERR_E220_NOT_INITIAL,
+  ERR_E220_INVALID_PARAM,
+  ERR_E220_DATA_SIZE_NOT_MATCH,
+  ERR_E220_BUF_TOO_SMALL,
+  ERR_E220_TIMEOUT,
+  ERR_E220_HARDWARE,
+  ERR_E220_HEAD_NOT_RECOGNIZED,
+  ERR_E220_NO_RESPONSE_FROM_DEVICE,
+  ERR_E220_WRONG_UART_CONFIG,
+  ERR_E220_WRONG_FORMAT,
+  ERR_E220_PACKET_TOO_BIG
+} Status;
+
+static String getResponseDescriptionByParams(byte status){
+	switch (status)
+	{
+	  case E220_SUCCESS:
+		return F("Success");
+		break;
+	  case ERR_E220_UNKNOWN:
+		return F("Unknown");
+		break;
+	  case ERR_E220_NOT_SUPPORT:
+		return F("Not support!");
+		break;
+	  case ERR_E220_NOT_IMPLEMENT:
+		return F("Not implement");
+		break;
+	  case ERR_E220_NOT_INITIAL:
+		return F("Not initial!");
+		break;
+	  case ERR_E220_INVALID_PARAM:
+		return F("Invalid param!");
+		break;
+	  case ERR_E220_DATA_SIZE_NOT_MATCH:
+		return F("Data size not match!");
+		break;
+	  case ERR_E220_BUF_TOO_SMALL:
+		return F("Buff too small!");
+		break;
+	  case ERR_E220_TIMEOUT:
+		return F("Timeout!!");
+		break;
+	  case ERR_E220_HARDWARE:
+		return F("Hardware error!");
+		break;
+	  case ERR_E220_HEAD_NOT_RECOGNIZED:
+		return F("Save mode returned not recognized!");
+		break;
+	  case ERR_E220_NO_RESPONSE_FROM_DEVICE:
+		return F("No response from device! (Check wiring)");
+		break;
+	  case ERR_E220_WRONG_UART_CONFIG:
+		return F("Wrong UART configuration! (BPS must be 9600 for configuration)");
+		break;
+	  case ERR_E220_PACKET_TOO_BIG:
+		return F("The device support only 200byte of data transmission!");
+		break;
+	  default:
+		return F("Invalid status!");
+	}
+}
+
+enum UART_PARITY
+{
+  MODE_00_8N1 = 0b00,
+  MODE_01_8O1 = 0b01,
+  MODE_10_8E1 = 0b10,
+  MODE_11_8N1 = 0b11
+};
+
+static String getUARTParityDescriptionByParams(byte uartParity){
+	switch (uartParity)
+	{
+	  case MODE_00_8N1:
+		return F("8N1 (Default)");
+		break;
+	  case MODE_01_8O1:
+		return F("8O1");
+		break;
+	  case MODE_10_8E1:
+		return F("8E1");
+		break;
+	  case MODE_11_8N1:
+		return F("8N1 (equal to 00");
+		break;
+	  default:
+		return F("Invalid UART Parity!");
+	}
+}
+
+enum UART_BPS_TYPE
+{
+  UART_BPS_1200 = 0b000,
+  UART_BPS_2400 = 0b001,
+  UART_BPS_4800 = 0b010,
+  UART_BPS_9600 = 0b011,
+  UART_BPS_19200 = 0b100,
+  UART_BPS_38400 = 0b101,
+  UART_BPS_57600 = 0b110,
+  UART_BPS_115200 = 0b111
+};
+
+enum UART_BPS_RATE
+{
+  UART_BPS_RATE_1200 = 1200,
+  UART_BPS_RATE_2400 = 2400,
+  UART_BPS_RATE_4800 = 4800,
+  UART_BPS_RATE_9600 = 9600,
+  UART_BPS_RATE_19200 = 19200,
+  UART_BPS_RATE_38400 = 38400,
+  UART_BPS_RATE_57600 = 57600,
+  UART_BPS_RATE_115200 = 115200
+};
+
+static String getUARTBaudRateDescriptionByParams(byte uartBaudRate)
+{
+	switch (uartBaudRate)
+	{
+	  case UART_BPS_1200:
+		return F("1200bps");
+		break;
+	  case UART_BPS_2400:
+		return F("2400bps");
+		break;
+	  case UART_BPS_4800:
+		return F("4800bps");
+		break;
+	  case UART_BPS_9600:
+		return F("9600bps (default)");
+		break;
+	  case UART_BPS_19200:
+		return F("19200bps");
+		break;
+	  case UART_BPS_38400:
+		return F("38400bps");
+		break;
+	  case UART_BPS_57600:
+		return F("57600bps");
+		break;
+	  case UART_BPS_115200:
+		return F("115200bps");
+		break;
+	  default:
+		return F("Invalid UART Baud Rate!");
+	}
+}
+
+enum AIR_DATA_RATE
+{
+  AIR_DATA_RATE_000_24 = 0b000,
+  AIR_DATA_RATE_001_24 = 0b001,
+  AIR_DATA_RATE_010_24 = 0b010,
+  AIR_DATA_RATE_011_48 = 0b011,
+  AIR_DATA_RATE_100_96 = 0b100,
+  AIR_DATA_RATE_101_192 = 0b101,
+  AIR_DATA_RATE_110_384 = 0b110,
+  AIR_DATA_RATE_111_625 = 0b111
+};
+
+
+static String getAirDataRateDescriptionByParams(byte airDataRate)
+{
+	switch (airDataRate)
+	{
+	  case AIR_DATA_RATE_000_24:
+		return F("2.4kbps");
+		break;
+	  case AIR_DATA_RATE_001_24:
+		return F("2.4kbps");
+		break;
+	  case AIR_DATA_RATE_010_24:
+		return F("2.4kbps (default)");
+		break;
+	  case AIR_DATA_RATE_011_48:
+		return F("4.8kbps");
+		break;
+	  case AIR_DATA_RATE_100_96:
+		return F("9.6kbps");
+		break;
+	  case AIR_DATA_RATE_101_192:
+		return F("19.2kbps");
+		break;
+	  case AIR_DATA_RATE_110_384:
+		return F("38.4kbps");
+		break;
+	  case AIR_DATA_RATE_111_625:
+		return F("62.5kbps");
+		break;
+	  default:
+		return F("Invalid Air Data Rate!");
+	}
+}
+
+enum SUB_PACKET_SETTING {
+	SPS_200_00 = 0b00,
+	SPS_128_01 = 0b01,
+	SPS_064_10 = 0b10,
+	SPS_032_11 = 0b11
+
+};
+static String getSubPacketSettingByParams(byte subPacketSetting)
+{
+	switch (subPacketSetting)
+	{
+	  case SPS_200_00:
+		return F("200bytes (default)");
+		break;
+	  case SPS_128_01:
+		  return F("128bytes");
+		break;
+	  case SPS_064_10:
+		return F("64bytes");
+		break;
+	  case SPS_032_11:
+		return F("32bytes");
+		break;
+	  default:
+		return F("Invalid Sub Packet Setting!");
+	}
+}
+
+enum RSSI_AMBIENT_NOISE_ENABLE {
+	RSSI_AMBIENT_NOISE_ENABLED = 0b1,
+	RSSI_AMBIENT_NOISE_DISABLED = 0b0
+};
+static String getRSSIAmbientNoiseEnableByParams(byte rssiAmbientNoiseEnabled)
+{
+	switch (rssiAmbientNoiseEnabled)
+	{
+	  case RSSI_AMBIENT_NOISE_ENABLED:
+		return F("Enabled");
+		break;
+	  case RSSI_AMBIENT_NOISE_DISABLED:
+		  return F("Disabled (default)");
+		break;
+	  default:
+		return F("Invalid RSSI Ambient Noise enabled!");
+	}
+}
+
+enum WOR_PERIOD {
+	WOR_500_000 = 0b000,
+	WOR_1000_001 = 0b001,
+	WOR_1500_010 = 0b010,
+	WOR_2000_011 = 0b011,
+	WOR_2500_100 = 0b100,
+	WOR_3000_101 = 0b101,
+	WOR_3500_110 = 0b110,
+	WOR_4000_111 = 0b111
+
+};
+static String getWORPeriodByParams(byte WORPeriod)
+{
+	switch (WORPeriod)
+	{
+	  case WOR_500_000:
+		return F("500ms");
+		break;
+	  case WOR_1000_001:
+			return F("1000ms");
+		break;
+	  case WOR_1500_010:
+			return F("1500ms");
+		break;
+	  case WOR_2000_011:
+			return F("2000ms (default)");
+		break;
+	  case WOR_2500_100:
+			return F("2500ms");
+		break;
+	  case WOR_3000_101:
+			return F("3000ms");
+		break;
+	  case WOR_3500_110:
+			return F("3500ms");
+		break;
+	  case WOR_4000_111:
+			return F("4000ms");
+		break;
+	  default:
+		return F("Invalid WOR period!");
+	}
+}
+enum LBT_ENABLE_BYTE {
+	LBT_ENABLED = 0b1,
+	LBT_DISABLED = 0b0
+};
+static String getLBTEnableByteByParams(byte LBTEnableByte)
+{
+	switch (LBTEnableByte)
+	{
+	  case LBT_ENABLED:
+		return F("Enabled");
+		break;
+	  case LBT_DISABLED:
+		  return F("Disabled (default)");
+		break;
+	  default:
+		return F("Invalid LBT enable byte!");
+	}
+}
+
+enum RSSI_ENABLE_BYTE {
+	RSSI_ENABLED = 0b1,
+	RSSI_DISABLED = 0b0
+};
+static String getRSSIEnableByteByParams(byte RSSIEnableByte)
+{
+	switch (RSSIEnableByte)
+	{
+	  case RSSI_ENABLED:
+		return F("Enabled");
+		break;
+	  case RSSI_DISABLED:
+		  return F("Disabled (default)");
+		break;
+	  default:
+		return F("Invalid RSSI enable byte!");
+	}
+}
+
+enum FIDEX_TRANSMISSION
+{
+  FT_TRANSPARENT_TRANSMISSION = 0b0,
+  FT_FIXED_TRANSMISSION = 0b1
+};
+
+
+static String getFixedTransmissionDescriptionByParams(byte fixedTransmission)
+{
+	switch (fixedTransmission)
+	{
+	  case FT_TRANSPARENT_TRANSMISSION:
+		return F("Transparent transmission (default)");
+		break;
+	  case FT_FIXED_TRANSMISSION:
+		return F("Fixed transmission (first three bytes can be used as high/low address and channel)");
+		break;
+	  default:
+		return F("Invalid fixed transmission param!");
+	}
+}
+
+#ifdef E220_22
+	enum TRANSMISSION_POWER
+	{
+	  POWER_22 = 0b00,
+	  POWER_17 = 0b01,
+	  POWER_13 = 0b10,
+	  POWER_10 = 0b11
+
+	};
+
+	static String getTransmissionPowerDescriptionByParams(byte transmissionPower)
+	{
+		switch (transmissionPower)
+		{
+		  case POWER_22:
+			return F("22dBm (Default)");
+			break;
+		  case POWER_17:
+			return F("17dBm");
+			break;
+		  case POWER_13:
+			return F("13dBm");
+			break;
+		  case POWER_10:
+			return F("10dBm");
+			break;
+		  default:
+			return F("Invalid transmission power param");
+		}
+	}
+#elif defined(E220_30)
+	enum TRANSMISSION_POWER
+	{
+	  POWER_30 = 0b00,
+	  POWER_27 = 0b01,
+	  POWER_24 = 0b10,
+	  POWER_21 = 0b11
+
+	};
+
+	static String getTransmissionPowerDescriptionByParams(byte transmissionPower)
+	{
+		switch (transmissionPower)
+		{
+		  case POWER_30:
+			return F("30dBm (Default)");
+			break;
+		  case POWER_27:
+			return F("27dBm");
+			break;
+		  case POWER_24:
+			return F("24dBm");
+			break;
+		  case POWER_21:
+			return F("21dBm");
+			break;
+		  default:
+			return F("Invalid transmission power param");
+		}
+	}
+#else
+	enum TRANSMISSION_POWER
+	{
+	  POWER_22 = 0b00,
+	  POWER_17 = 0b01,
+	  POWER_13 = 0b10,
+	  POWER_10 = 0b11
+
+	};
+
+	static String getTransmissionPowerDescriptionByParams(byte transmissionPower)
+	{
+		switch (transmissionPower)
+		{
+		  case POWER_22:
+			return F("22dBm (Default)");
+			break;
+		  case POWER_17:
+			return F("17dBm");
+			break;
+		  case POWER_13:
+			return F("13dBm");
+			break;
+		  case POWER_10:
+			return F("10dBm");
+			break;
+		  default:
+			return F("Invalid transmission power param");
+		}
+	}
+#endif

Software/lib/EByte LoRa E220 library/keywords.txt

@@ -0,0 +1,30 @@
+###########################################
+# Syntax Coloring Map For LoRa_E32_Series-library
+###########################################
+
+###########################################
+# Datatypes (KEYWORD1)
+###########################################
+
+LoRa_E220	KEYWORD1
+
+###########################################
+# Methods and Functions (KEYWORD2)
+###########################################
+
+begin	KEYWORD2
+
+getConfiguration	KEYWORD2
+setConfiguration	KEYWORD2
+
+getModuleInformation	KEYWORD2
+printParameters	KEYWORD2
+resetModule	KEYWORD2
+
+sendMessage	KEYWORD2
+receiveMessage	KEYWORD2
+
+sendFixedMessage	KEYWORD2
+sendBroadcastFixedMessage	KEYWORD2
+
+receiveInitialMessage	KEYWORD2

Software/lib/EByte LoRa E220 library/library.properties

@@ -0,0 +1,11 @@
+name=EByte LoRa E220 library
+version=1.0.6
+author=Renzo Mischianti <renzo.mischianti@gmail.com>
+maintainer=Renzo Mischianti <renzo.mischianti@gmail.com>
+sentence=LoRa EBYTE E220 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico. LLCC68
+paragraph=Ebyte E220 LoRa (Long Range) library device very cheap and very long range (from 5Km to 10Km). Arduino LoRa EBYTE E220 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico. LLCC68
+category=Communication
+url=https://www.mischianti.org/category/my-libraries/ebyte-lora-e22-devices/
+repository=https://github.com/xreef/EByte_LoRa_E220_Series_Library
+architectures=*
+includes=LoRa_E220.h

Software/platformio.ini

@@ -13,49 +13,48 @@ extra_configs =
   wifi_credentials.ini
 
 [env:de-timer]
-platform = espressif32
+platform = espressif8266
-board = ttgo-lora32-v1
+framework = arduino
-board_build.filesystem = littlefs
+board = d1_mini
-;board_build.f_flash = 80000000L
-;board_build.ldscript = eagle.flash.4m1m.ld
-
-monitor_filters = esp32_exception_decoder
-monitor_speed = 115200
 
 upload_protocol = esptool
 upload_speed = 921600
 ;upload_port = 10.0.1.48
 ;upload_protocol = espota
 ;upload_flags =  
-;   --auth=${wifi_cred.admin_password}
+;   --auth=${wifi_cred.ota_password}
-
-build_type = debug
 
 build_flags=
   !python git_rev_macro.py
-  -DSERIAL_DEBUG
+  -DATOMIC_FS_UPDATE
-  ;-DWIFI_CLIENT
+  ;-DFEATURE_ENABLE_WIFI_CLIENT
+  ;-DFEATURE_ENABLE_LORA
   ;-DCAPTIVE
-  -DWIFI_AP_IP_GW=10,0,1,1
+  -DFEATURE_ENABLE_UARTLORA
-  -DADMIN_PASSWORD=${wifi_cred.admin_password}
+  -DWIFI_AP_IP_GW=10,0,0,1
-  -DWIFI_SSID=${wifi_cred.wifi_ssid}
+  -DADMIN_PASSWORD=${wifi_cred.ota_password}
-  -DWIFI_PASSWORD=${wifi_cred.wifi_password}
+  -DWIFI_CLIENT_SSID=${wifi_cred.wifi_client_ssid}
+  -DWIFI_CLIENT_PASSWORD=${wifi_cred.wifi_client_password}
+  -DWIFI_AP_SSID=${wifi_cred.wifi_ap_ssid}
   -DWIFI_AP_PASSWORD=${wifi_cred.wifi_ap_password}
   -DDEVICE_NAME='"Dark Emergency Timer"'
-  -DFACTION_1_NAME='"GOF"'
-  -DFACTION_2_NAME='"MILIZ"'
-  -DFACTION_3_NAME='"KGG"'
 
-framework = arduino
+;build_type = debug
+
+board_build.filesystem = littlefs
+board_build.ldscript = eagle.flash.4m1m.ld
+extra_scripts = post:prepare_littlefs.py
+
+monitor_filters = esp8266_exception_decoder
+monitor_speed = 115200
+
 lib_deps = 
-    smougenot/TM1637@0.0.0-alpha+sha.9486982048
+	;xreef/EByte LoRa E220 library@^1.0.6   ; made Lib local, due to changes for I2C-controller M0,M1-Pins
-    ;me-no-dev/ESP Async WebServer @ ^1.2.3  ; local version included due to bug
+	sstaub/Ticker@^4.4.0
-    me-no-dev/AsyncTCP @ ^1.1.1
+  robtillaart/PCF8574 @ ^0.3.7
-    sstaub/Ticker @ ^4.2.0
+	adafruit/Adafruit INA219 @ ^1.1.1
-    adafruit/Adafruit INA219 @ ^1.1.1
+  akj7/TM1637 Driver @ ^2.1.2
-    robtillaart/I2C_EEPROM @ ^1.5.2
+  me-no-dev/ESPAsyncTCP @ ^1.2.2
-    sandeepmistry/LoRa @ ^0.8.0
+  robtillaart/I2C_EEPROM @ ^1.5.2
-    adafruit/Adafruit SSD1306 @ ^2.4.0
+  sandeepmistry/LoRa @ ^0.8.0
-    adafruit/Adafruit GFX Library @ ^1.10.1
+  bblanchon/ArduinoJson @ ^6.19.4
-    adafruit/Adafruit BusIO @ ^1.5.0
-    bblanchon/ArduinoJson @ ^6.19.4

Software/prepare_littlefs.py

@@ -0,0 +1,116 @@
+# SCRIPT TO GZIP CRITICAL FILES FOR ACCELERATED WEBSERVING
+# see also https://community.platformio.org/t/question-esp32-compress-files-in-data-to-gzip-before-upload-possible-to-spiffs/6274/10
+
+
+import glob
+import shutil
+import gzip
+import os
+Import("env")
+Import("projenv")
+
+
+def gzip_file(src_path, dst_path):
+
+    with open(src_path, 'rb') as src, gzip.open(dst_path, 'wb') as dst:
+        for chunk in iter(lambda: src.read(4096), b""):
+            dst.write(chunk)
+
+
+def getListOfFiles(dirName):
+    # create a list of file and sub directories
+    # names in the given directory
+    listOfFile = os.listdir(dirName)
+    allFiles = list()
+    # Iterate over all the entries
+    for entry in listOfFile:
+        # Create full path
+        fullPath = os.path.join(dirName, entry)
+        # If entry is a directory then get the list of files in this directory
+        if os.path.isdir(fullPath):
+            allFiles = allFiles + getListOfFiles(fullPath)
+        else:
+            allFiles.append(fullPath)
+
+    return allFiles
+
+def remove_prefix(text, prefix):
+    if text.startswith(prefix):
+        return text[len(prefix):]
+    return text  # or whatever
+
+# Compress files from 'data_src/' to 'data/'
+
+
+def gzip_webfiles(source, target, env):
+    # Filetypes to compress
+    filetypes_to_gzip = ['.css', '.png', '.js', '.ico', '.woff2', '.json']
+    print('\nGZIP: Starting gzip-Process for LittleFS-Image...\n')
+    data_src_dir_path = os.path.join(env.get('PROJECT_DIR'), 'data_src')
+    data_dir_path = env.get('PROJECT_DATA_DIR')
+    # check if data and datasrc exist. If the first exists and not the second, it renames it
+    if(os.path.exists(data_dir_path) and not os.path.exists(data_src_dir_path)):
+        print('GZIP: Directory "'+data_dir_path +
+              '" exists, "'+data_src_dir_path+'" is not found.')
+        print('GZIP: Renaming "' + data_dir_path +
+              '" to "' + data_src_dir_path + '"')
+        os.rename(data_dir_path, data_src_dir_path)
+    # Delete the 'data' directory
+    if(os.path.exists(data_dir_path)):
+        print('GZIP: Deleting the "data" directory ' + data_dir_path)
+        shutil.rmtree(data_dir_path)
+    # Recreate empty 'data' directory
+    print('GZIP: Re-creating an empty data directory ' + data_dir_path)
+    os.mkdir(data_dir_path)
+    # Determine the files to compress
+
+    files_to_copy = []
+    files_to_gzip = []
+
+    all_data_src = getListOfFiles(data_src_dir_path)
+    for file in all_data_src:
+        file_name, file_extension = os.path.splitext(file)
+        print(file_name + " has filetype " + file_extension)
+        if file_extension in filetypes_to_gzip:
+            files_to_gzip.append(file)
+        else:
+            filename_subdir = remove_prefix(file, data_src_dir_path)
+            files_to_copy.append(filename_subdir)
+
+    for file in files_to_copy:
+        print('GZIP: Copying file from: ' + data_src_dir_path + file + ' to: ' + data_dir_path + file)
+        os.makedirs(os.path.dirname(data_dir_path + file), exist_ok=True)
+        shutil.copy(data_src_dir_path + file, data_dir_path + file)
+    # Compress and move files
+    
+    was_error = False
+    try:
+        for source_file_path in files_to_gzip:
+            print('GZIP: compressing... ' + source_file_path)
+            filename_subdir = remove_prefix(source_file_path, data_src_dir_path)
+            target_file_path = data_dir_path + filename_subdir
+            os.makedirs(os.path.dirname(target_file_path), exist_ok=True)
+            print('GZIP: Compressed... ' + target_file_path)
+            gzip_file(source_file_path, target_file_path + ".gz")
+    except IOError as e:
+        was_error = True
+        print('GZIP: Failed to compress file: ' + source_file_path)
+        # print( 'GZIP: EXCEPTION... {}'.format( e ) )
+    if was_error:
+        print('GZIP: Failure/Incomplete.\n')
+    else:
+        print('GZIP: Compressed correctly.\n')
+
+    return
+ 
+def gzip_binffiles(source, target, env):
+    littlefsbin = target[0].get_abspath()
+    targetbin = os.path.join(os.path.dirname(littlefsbin), 'filesystem.fs')
+    shutil.copyfile(littlefsbin, targetbin)
+    gzip_file(targetbin, os.path.join(str(targetbin) + '.gz'))
+    os.remove(targetbin)
+    return
+
+# IMPORTANT, this needs to be added to call the routine
+env.AddPreAction('$BUILD_DIR/littlefs.bin', gzip_webfiles)
+env.AddPostAction('$BUILD_DIR/littlefs.bin', gzip_binffiles)

Software/src/common.h

@@ -1,41 +0,0 @@
-#ifndef _COMMON_H_
-#define _COMMON_H_
-
-#define Q(x) #x
-#define QUOTE(x) Q(x)
-
-// Module connection pins (ESP GPIO-Nums)
-#define CLK 12
-#define DIO_FAC_1_7SEG 13
-#define DIO_FAC_2_7SEG 17
-#define DIO_FAC_3_7SEG 21
-
-#define DIO_FAC_1_TRG 36
-#define FAC_1_TRG_PRESSED LOW
-#define DIO_FAC_2_TRG 37
-#define FAC_2_TRG_PRESSED LOW
-#define DIO_FAC_3_TRG 38
-#define FAC_3_TRG_PRESSED LOW
-
-#ifndef HOST_NAME
-#define HOST_NAME "DE_Timer_%06X" // Use printf-Formatting - Chip-ID (uin32_t) will be added
-#endif
-
-#ifndef OTA_DELAY
-#define OTA_DELAY 50 // ticks -> 10ms / tick
-#endif
-
-#ifndef ADMIN_PASSWORD
-#error "You need to define ADMIN_PASSWORD for OTA-Update"
-#endif
-#ifndef WIFI_PASSWORD
-#error "You must define an WIFI_PASSWORD for OTA-Update"
-#endif
-#ifndef WIFI_SSID
-#error "You must define an WIFI_SSID for OTA-Update"
-#endif
-#ifndef WIFI_AP_PASSWORD
-#error "You must define an WIFI_AP_PASSWORD for Standalone AP-Mode"
-#endif
-
-#endif

Software/src/config.cpp

@@ -1,261 +0,0 @@
-#include "config.h"
-
-I2C_eeprom ee(0x50, EEPROM_SIZE_BYTES);
-
-configData_t ConfigData;
-persistenceData_t PersistenceData;
-const uint16_t eeVersion = 1; // inc
-boolean eeAvailable = false;
-
-const uint16_t persistencemarker_Adress = 0; // sizeof 4
-const uint16_t startofConfig_Adress = 16;
-const uint16_t startofPersistence_Adress = startofConfig_Adress + sizeof(ConfigData) + (sizeof(ConfigData) % 16);
-
-boolean checkEEPROMavailable();
-
-void InitEEPROM()
-{
-  ee.begin();
-  if (!checkEEPROMavailable())
-  {
-    globals.systemStatus = sysStat_Error;
-    MaintainDTC(DTC_NO_EEPROM_FOUND, true);
-    return;
-  }
-  GetConfig_EEPROM();
-
-  if (ConfigData.EEPROM_Version != eeVersion)
-  {
-    FormatConfig_EEPROM();
-    globals.systemStatus = sysStat_Error;
-    MaintainDTC(DTC_EEPROM_VERSION_BAD, true);
-    return;
-  }
-
-  if (getPersistanceAddress() > ee.getDeviceSize())
-  {
-    FormatPersistence_EEPROM();
-    globals.systemStatus = sysStat_Error;
-    MaintainDTC(DTC_EEPROM_PDS_MARKER_INVALID, true);
-    return;
-  }
-  GetPersistence_EEPROM();
-}
-
-void EEPROM_Process()
-{
-
-  switch (globals.requestEEAction)
-  {
-  case EE_CFG_SAVE:
-    StoreConfig_EEPROM();
-    globals.requestEEAction = EE_IDLE;
-    break;
-  case EE_CFG_LOAD:
-    GetConfig_EEPROM();
-    globals.requestEEAction = EE_IDLE;
-    break;
-  case EE_PDS_SAVE:
-    StorePersistence_EEPROM();
-    globals.requestEEAction = EE_IDLE;
-    break;
-  case EE_PDS_LOAD:
-    GetPersistence_EEPROM();
-    globals.requestEEAction = EE_IDLE;
-    break;
-  case EE_IDLE:
-  default:
-    globals.requestEEAction = EE_IDLE;
-  }
-}
-
-void StoreConfig_EEPROM()
-{
-  ConfigData.checksum = 0;
-  ConfigData.checksum = Checksum_EEPROM((uint8_t *)&ConfigData, sizeof(ConfigData));
-  if (!checkEEPROMavailable())
-    return;
-
-  ee.updateBlock(startofConfig_Adress, (uint8_t *)&ConfigData, sizeof(ConfigData));
-}
-
-void GetConfig_EEPROM()
-{
-  if (!checkEEPROMavailable())
-    return;
-
-  ee.readBlock(startofConfig_Adress, (uint8_t *)&ConfigData, sizeof(ConfigData));
-
-  uint32_t checksum = ConfigData.checksum;
-  ConfigData.checksum = 0;
-
-  if (Checksum_EEPROM((uint8_t *)&ConfigData, sizeof(ConfigData)) != checksum)
-  {
-    MaintainDTC(DTC_EEPROM_CFG_BAD, true);
-    FormatConfig_EEPROM();
-  }
-  ConfigData.checksum = checksum;
-}
-
-uint32_t getPersistanceAddress()
-{
-  uint32_t eePersistenceMarker;
-  ee.readBlock(persistencemarker_Adress, (uint8_t *)&eePersistenceMarker, sizeof(eePersistenceMarker));
-  return eePersistenceMarker;
-}
-
-void updatePersistanceAddress(uint32_t adress)
-{
-  ee.updateBlock(persistencemarker_Adress, (uint8_t *)&adress, sizeof(adress));
-}
-
-void StorePersistence_EEPROM()
-{
-  if (PersistenceData.writeCycleCounter >= EEPROM_ENDURANCE)
-    MovePersistencePage_EEPROM(false);
-  else
-    PersistenceData.writeCycleCounter++;
-
-  PersistenceData.checksum = 0;
-  PersistenceData.checksum = Checksum_EEPROM((uint8_t *)&PersistenceData, sizeof(PersistenceData));
-
-  if (!checkEEPROMavailable())
-    return;
-
-  ee.updateBlock(getPersistanceAddress(), (uint8_t *)&PersistenceData, sizeof(PersistenceData));
-}
-
-void GetPersistence_EEPROM()
-{
-  if (!checkEEPROMavailable())
-    return;
-
-  ee.readBlock(getPersistanceAddress(), (uint8_t *)&PersistenceData, sizeof(PersistenceData));
-
-  uint32_t checksum = PersistenceData.checksum;
-  PersistenceData.checksum = 0;
-
-  if (Checksum_EEPROM((uint8_t *)&PersistenceData, sizeof(PersistenceData)) != checksum)
-  {
-    MaintainDTC(DTC_EEPROM_PDS_BAD, true);
-    FormatPersistence_EEPROM();
-  }
-  PersistenceData.checksum = checksum;
-}
-
-void FormatConfig_EEPROM()
-{
-  configData_t defaults;
-  ConfigData = defaults;
-  ConfigData.EEPROM_Version = eeVersion;
-  StoreConfig_EEPROM();
-}
-
-void FormatPersistence_EEPROM()
-{
-  persistenceData_t defaults;
-  PersistenceData = defaults;
-  updatePersistanceAddress(startofPersistence_Adress);
-  StorePersistence_EEPROM();
-}
-
-void MovePersistencePage_EEPROM(boolean reset)
-{
-  if (!checkEEPROMavailable())
-    return;
-
-  if (reset)
-  {
-    updatePersistanceAddress(startofPersistence_Adress);
-  }
-  else
-  {
-    uint32_t newPersistenceMarker = getPersistanceAddress() + sizeof(PersistenceData);
-
-    // check if we reached the End of the EEPROM and Startover at the beginning
-    if ((newPersistenceMarker + sizeof(PersistenceData)) > ee.getDeviceSize())
-    {
-      MaintainDTC(DTC_EEPROM_WORNOUT, true);
-      return;
-    }
-    else
-    {
-      updatePersistanceAddress(newPersistenceMarker);
-      PersistenceData.writeCycleCounter = 0;
-    }
-  }
-}
-
-uint32_t GetEESize()
-{
-  return ee.getDeviceSize();
-}
-
-uint32_t Checksum_EEPROM(uint8_t const *data, size_t len)
-{
-  if (data == NULL)
-    return 0;
-  uint32_t crc, mask;
-  crc = 0xFFFFFFFF;
-
-  while (len--)
-  {
-    crc ^= *data++;
-    for (uint8_t k = 0; k < 8; k++)
-    {
-      mask = -(crc & 1);
-      crc = (crc >> 1) ^ (0xEDB88320 & mask);
-    }
-  }
-  return ~crc;
-}
-
-void dumpEEPROM(uint16_t memoryAddress, uint16_t length)
-{
-#define BLOCK_TO_LENGTH 16
-
-  if (length > ee.getDeviceSize())
-    length = ee.getDeviceSize();
-
-  if (memoryAddress + length > ee.getDeviceSize())
-    return;
-
-  if (!checkEEPROMavailable())
-    return;
-
-  char ascii_buf[BLOCK_TO_LENGTH + 1];
-  sprintf(ascii_buf, "%*s", BLOCK_TO_LENGTH, "ASCII");
-  Serial.print(PSTR("\nAddress "));
-  for (int x = 0; x < BLOCK_TO_LENGTH; x++)
-    Serial.printf("%3d", x);
-
-  memoryAddress = memoryAddress / BLOCK_TO_LENGTH * BLOCK_TO_LENGTH;
-  length = (length + BLOCK_TO_LENGTH - 1) / BLOCK_TO_LENGTH * BLOCK_TO_LENGTH;
-
-  for (unsigned int i = 0; i < length; i++)
-  {
-    int blockpoint = memoryAddress % BLOCK_TO_LENGTH;
-    if (blockpoint == 0)
-    {
-      ascii_buf[BLOCK_TO_LENGTH] = 0;
-      Serial.printf("  %s", ascii_buf);
-      Serial.printf("\n0x%05X:", memoryAddress);
-    }
-    ascii_buf[blockpoint] = ee.readByte(memoryAddress);
-    Serial.printf(" %02X", ascii_buf[blockpoint]);
-    if (ascii_buf[blockpoint] < 0x20 || ascii_buf[blockpoint] > 0x7E)
-      ascii_buf[blockpoint] = '.';
-    memoryAddress++;
-  }
-  Serial.println();
-}
-
-boolean checkEEPROMavailable()
-{
-  if (!ee.isConnected())
-  {
-    MaintainDTC(DTC_NO_EEPROM_FOUND, true);
-    return false;
-  }
-  return true;
-}

Software/src/config.h

@@ -1,69 +0,0 @@
-#ifndef _CONFIG_H_
-#define _CONFIG_H_
-
-#include <Arduino.h>
-#include <Wire.h>
-#include <I2C_eeprom.h>
-
-#include "globals.h"
-#include "dtc.h"
-
-#define EEPROM_SIZE_BYTES I2C_DEVICESIZE_24LC01
-#define EEPROM_ENDURANCE 1000000
-
-typedef enum
-{
-  NONE,
-  FACTION_1,
-  FACTION_2,
-  FACTION_3
-} factions_t;
-
-typedef struct
-{
-  uint32_t writeCycleCounter = 0;
-  uint32_t faction_1_timer = 0;
-  uint32_t faction_2_timer = 0;
-  uint32_t faction_3_timer = 0;
-  factions_t activeFaction = NONE;
-  uint32_t checksum = 0;
-} persistenceData_t;
-
-typedef enum
-{
-  BATTERY_UNDEFINED,
-  BATTERY_LIPO_2S,
-  BATTERY_LIPO_3S
-} batteryType_t;
-
-const char BatteryString[][10]{
-  "Undefined",
-  "LiPo 2S",
-  "LiPo 3S"
-};
-
-typedef struct
-{
-  uint8_t EEPROM_Version = 1;
-  batteryType_t batteryType = BATTERY_UNDEFINED;
-  uint32_t checksum = 0;
-} configData_t;
-
-void InitEEPROM();
-void EEPROM_Process();
-void StoreConfig_EEPROM();
-void GetConfig_EEPROM();
-void StorePersistence_EEPROM();
-void GetPersistence_EEPROM();
-void FormatConfig_EEPROM();
-void FormatPersistence_EEPROM();
-uint32_t Checksum_EEPROM(uint8_t const *data, size_t len);
-void dumpEEPROM(uint16_t memoryAddress, uint16_t length);
-void MovePersistencePage_EEPROM(boolean reset);
-uint32_t getPersistanceAddress();
-void updatePersistanceAddress(uint32_t adress);
-uint32_t GetEESize();
-
-extern configData_t ConfigData;
-extern persistenceData_t PersistenceData;
-#endif // _CONFIG_H_

Software/src/debugger.cpp

@@ -0,0 +1,302 @@
+#include "debugger.h"
+
+DebugStatus_t DebuggerStatus[dbg_cntElements];
+
+String IpAddress2String(const IPAddress &ipAddress);
+void processCmdDebug(String command);
+void Debug_formatCFG();
+void Debug_formatPersistence();
+void Debug_printSystemInfo();
+void Debug_printWifiInfo();
+void Debug_CheckEEPOM();
+void Debug_dumpConfig();
+void Debug_dumpPersistance();
+void Debug_ShowDTCs();
+void Debug_dumpGlobals();
+void Debug_printHelp();
+
+void initDebugger()
+{
+    DebuggerStatus[dbg_Serial] = disabled;
+    DebuggerStatus[dbg_Webui] = disabled;
+
+    Serial.setDebugOutput(false);
+}
+
+void Debug_Process()
+{
+    typedef enum InputProcessed_e
+    {
+        IDLE,
+        CMD_COMPLETE,
+        CMD_ABORT,
+        CMD_OVERFLOW
+    } InputProcessed_t;
+
+    static unsigned int inputCnt = 0;
+    static char inputBuffer[32];
+    InputProcessed_t InputProcessed = IDLE;
+
+    if (Serial.available())
+    {
+        char inputChar = Serial.read();
+
+        switch (inputChar)
+        {
+        case '\n':
+            inputBuffer[inputCnt] = 0; // terminate the String
+            inputCnt = 0;
+            InputProcessed = CMD_COMPLETE;
+            break;
+
+        case 0x1B: // Esc
+            inputBuffer[0] = 0;
+            inputCnt = 0;
+            InputProcessed = CMD_ABORT;
+            break;
+
+        case 0x21 ... 0x7E: // its a real letter or sign and not some control-chars
+            inputBuffer[inputCnt] = inputChar;
+            inputCnt++;
+            break;
+
+        default:
+            break;
+        }
+
+        if (inputCnt > sizeof(inputBuffer))
+        {
+            inputCnt = 0;
+            inputBuffer[sizeof(inputBuffer) - 1] = 0; // terminate the String
+            InputProcessed = CMD_OVERFLOW;
+        }
+    }
+
+    switch (InputProcessed)
+    {
+    case CMD_ABORT:
+        Debug_pushMessage("Abort\n");
+        break;
+
+    case CMD_COMPLETE:
+        processCmdDebug(String(inputBuffer));
+        break;
+
+    case CMD_OVERFLOW:
+        Debug_pushMessage("input Buffer overflow\n");
+        break;
+
+    default:
+        break;
+    }
+    InputProcessed = IDLE;
+}
+
+void SetDebugportStatus(DebugPorts_t port, DebugStatus_t status)
+{
+    if (status == disabled)
+        Debug_pushMessage("disable DebugPort %s\n", sDebugPorts[port]);
+
+    DebuggerStatus[port] = status;
+
+    if (status == enabled)
+        Debug_pushMessage("enabled DebugPort %s\n", sDebugPorts[port]);
+}
+
+void Debug_pushMessage(const char *format, ...)
+{
+    if ((DebuggerStatus[dbg_Serial] == enabled) || (DebuggerStatus[dbg_Webui] == enabled))
+    {
+        char buff[64];
+        va_list arg;
+        va_start(arg, format);
+        vsnprintf(buff, sizeof(buff), format, arg);
+        va_end(arg);
+
+        if (DebuggerStatus[dbg_Serial] == enabled)
+        {
+            Serial.print(buff);
+        }
+        if (DebuggerStatus[dbg_Webui] == enabled)
+        {
+            Websocket_PushLiveDebug(String(buff));
+        }
+    }
+}
+
+void processCmdDebug(String command)
+{
+    if (command == "help")
+        Debug_printHelp();
+    else if (command == "sysinfo")
+        Debug_printSystemInfo();
+    else if (command == "netinfo")
+        Debug_printWifiInfo();
+    else if (command == "formatCFG")
+        Debug_formatCFG();
+    else if (command == "formatPDS")
+        Debug_formatPersistence();
+    else if (command == "checkEE")
+        Debug_CheckEEPOM();
+    else if (command == "dumpEE1k")
+        dumpEEPROM(0, 1024);
+    else if (command == "dumpEE")
+        dumpEEPROM(0, EEPROM_SIZE_BYTES);
+    else if (command == "resetPageEE")
+        MovePersistencePage_EEPROM(true);
+    else if (command == "dumpCFG")
+        Debug_dumpConfig();
+    else if (command == "dumpPDS")
+        Debug_dumpPersistance();
+    else if (command == "saveEE")
+        globals.requestEEAction = EE_ALL_SAVE;
+    else if (command == "showdtc")
+        Debug_ShowDTCs();
+    else if (command == "dumpGlobals")
+        Debug_dumpGlobals();
+    else if (command == "sdbg")
+        SetDebugportStatus(dbg_Serial, enabled);
+    else
+        Debug_pushMessage("unknown Command\n");
+}
+
+void Debug_formatCFG()
+{
+    Debug_pushMessage("Formatting Config-EEPROM and reseting to default\n");
+    FormatConfig_EEPROM();
+}
+
+void Debug_formatPersistence()
+{
+    Debug_pushMessage("Formatting Persistence-EEPROM and reseting to default\n");
+    FormatPersistence_EEPROM();
+}
+
+void Debug_printSystemInfo()
+{
+    Debug_pushMessage("Hostname: %s\n", globals.DeviceName);
+
+    FlashMode_t ideMode = ESP.getFlashChipMode();
+    Debug_pushMessage("Sdk version: %s\n", ESP.getSdkVersion());
+    Debug_pushMessage("Core Version: %s\n", ESP.getCoreVersion().c_str());
+    Debug_pushMessage("Boot Version: %u\n", ESP.getBootVersion());
+    Debug_pushMessage("Boot Mode: %u\n", ESP.getBootMode());
+    Debug_pushMessage("CPU Frequency: %u MHz\n", ESP.getCpuFreqMHz());
+    Debug_pushMessage("Reset reason: %s\n", ESP.getResetReason().c_str());
+    Debug_pushMessage("Flash Size: %d\n", ESP.getFlashChipRealSize());
+    Debug_pushMessage("Flash Size IDE: %d\n", ESP.getFlashChipSize());
+    Debug_pushMessage("Flash ide mode:  %s\n", (ideMode == FM_QIO ? "QIO" : ideMode == FM_QOUT ? "QOUT"
+                                                                        : ideMode == FM_DIO    ? "DIO"
+                                                                        : ideMode == FM_DOUT   ? "DOUT"
+                                                                                               : "UNKNOWN"));
+    Debug_pushMessage("OTA-Pass: %s\n", QUOTE(ADMIN_PASSWORD));
+    Debug_pushMessage("Git-Revison: %s\n", constants.GitHash);
+    Debug_pushMessage("Sw-Version: %d.%02d\n", constants.FW_Version_major, constants.FW_Version_minor);
+}
+
+void Debug_dumpConfig()
+{
+    Debug_pushMessage("batteryType: %d\n", ConfigData.batteryType);
+    Debug_pushMessage("EEPROM_Version: %d\n", ConfigData.EEPROM_Version);
+    Debug_pushMessage("checksum: 0x%08X\n", ConfigData.checksum);
+}
+
+void Debug_dumpGlobals()
+{
+    Debug_pushMessage("systemStatus: %d\n", globals.systemStatus);
+    Debug_pushMessage("battery_level: %d\n", globals.battery_level);
+    Debug_pushMessage("loadvoltage_mV: %d\n", globals.loadvoltage_mV);
+    Debug_pushMessage("requestEEAction: %d\n", globals.requestEEAction);
+    Debug_pushMessage("DeviceName: %s\n", globals.DeviceName);
+    Debug_pushMessage("DeviceName_ID: %s\n", globals.DeviceName_ID);
+    Debug_pushMessage("FlashVersion: %s\n", globals.FlashVersion);
+    Debug_pushMessage("eePersistanceAdress: %d\n", globals.eePersistanceAdress);
+    Debug_pushMessage("hasDTC: %d\n", globals.hasDTC);
+}
+
+void Debug_dumpPersistance()
+{
+    Debug_pushMessage("writeCycleCounter: %d\n", PersistenceData.writeCycleCounter);
+    Debug_pushMessage("activeFaction: %d\n", PersistenceData.activeFaction);
+    Debug_pushMessage("faction_1_timer: %d\n", PersistenceData.faction_1_timer);
+    Debug_pushMessage("faction_2_timer: %d\n", PersistenceData.faction_2_timer);
+    Debug_pushMessage("faction_3_timer: %d\n", PersistenceData.faction_3_timer);
+    Debug_pushMessage("checksum: %d\n", PersistenceData.checksum);
+    Debug_pushMessage("PSD Adress: 0x%04X\n", globals.eePersistanceAdress);
+}
+
+void Debug_printWifiInfo()
+{
+}
+
+void Debug_CheckEEPOM()
+{
+    uint32_t checksum = PersistenceData.checksum;
+    PersistenceData.checksum = 0;
+
+    if (Checksum_EEPROM((uint8_t *)&PersistenceData, sizeof(PersistenceData)) == checksum)
+    {
+        Debug_pushMessage("PersistenceData EEPROM Checksum OK\n");
+    }
+    else
+    {
+        Debug_pushMessage("PersistenceData EEPROM Checksum BAD\n");
+    }
+
+    PersistenceData.checksum = checksum;
+
+    checksum = ConfigData.checksum;
+    ConfigData.checksum = 0;
+
+    if (Checksum_EEPROM((uint8_t *)&ConfigData, sizeof(ConfigData)) == checksum)
+    {
+        Debug_pushMessage("ConfigData EEPROM Checksum OK\n");
+    }
+    else
+    {
+        Debug_pushMessage("ConfigData EEPROM Checksum BAD\n");
+    }
+    ConfigData.checksum = checksum;
+}
+
+void Debug_ShowDTCs()
+{
+    char buff_timestamp[16]; // Format: DD-hh:mm:ss:xxx
+    char buff_active[9];
+
+    Debug_pushMessage("\n      timestamp | DTC-Nr. |   status | severity | debugVal\n");
+
+    for (uint32_t i = 0; i < MAX_DTC_STORAGE; i++)
+    {
+        if (DTCStorage[i].Number < DTC_LAST_DTC)
+        {
+            sprintf(buff_timestamp, "%02d-%02d:%02d:%02d:%03d",
+                    DTCStorage[i].timestamp / 86400000,    // Days
+                    DTCStorage[i].timestamp / 360000 % 24, // Hours
+                    DTCStorage[i].timestamp / 60000 % 60,  // Minutes
+                    DTCStorage[i].timestamp / 1000 % 60,   // Seconds
+                    DTCStorage[i].timestamp % 1000);       // milliseconds
+
+            if (DTCStorage[i].active == DTC_ACTIVE)
+                strcpy(buff_active, "active");
+            else if (DTCStorage[i].active == DTC_PREVIOUS)
+                strcpy(buff_active, "previous");
+            else
+                strcpy(buff_active, "none");
+
+            Debug_pushMessage("%s   %7d   %8s   %8d   %8d\n", buff_timestamp, DTCStorage[i].Number, buff_active, DTCStorage[i].severity, DTCStorage[i].debugVal);
+        }
+    }
+}
+
+void Debug_printHelp()
+{
+    char buff[64];
+
+    for (unsigned int i = sizeof(helpCmd) / 63; i < sizeof(helpCmd) / 63; i++)
+    {
+        memcpy_P(buff, (helpCmd + (i * 63)), 63);
+        buff[63] = 0;
+        Debug_pushMessage(buff);
+    }
+}

Software/src/dtc.cpp

@@ -1,8 +1,9 @@
 #include "dtc.h"
+#include "debugger.h"
 
 DTCEntry_s DTCStorage[MAX_DTC_STORAGE];
 
-void MaintainDTC(DTCNums_t DTC_no, boolean active)
+void MaintainDTC(DTCNums_t DTC_no, DTCSeverity_t DTC_severity, boolean active, uint32_t DebugValue)
 {
     for (int i = 0; i < MAX_DTC_STORAGE; i++)
     {
@@ -10,13 +11,15 @@ void MaintainDTC(DTCNums_t DTC_no, boolean active)
         {
             if (active && DTCStorage[i].active != DTC_ACTIVE)
             {
-                Serial.printf("DTC gone active: %d", DTC_no);
+                Debug_pushMessage("DTC gone active: %d, DebugVal: %d\n", DTC_no, DebugValue);
                 DTCStorage[i].timestamp = millis();
                 DTCStorage[i].active = DTC_ACTIVE;
+                DTCStorage[i].severity = DTC_severity;
+                DTCStorage[i].debugVal = DebugValue;
             }
             if (!active && DTCStorage[i].active == DTC_ACTIVE)
             {
-                Serial.printf("DTC gone previous: %d", DTC_no);
+                Debug_pushMessage("DTC gone previous: %d\n", DTC_no);
                 DTCStorage[i].active = DTC_PREVIOUS;
             }
             return;
@@ -31,10 +34,12 @@ void MaintainDTC(DTCNums_t DTC_no, boolean active)
         {
             if (DTCStorage[i].Number == DTC_LAST_DTC)
             {
-                Serial.printf("new DTC registered: %d", DTC_no);
+                Debug_pushMessage("new DTC registered: %d, DebugVal: %d\n", DTC_no, DebugValue);
                 DTCStorage[i].Number = DTC_no;
                 DTCStorage[i].timestamp = millis();
                 DTCStorage[i].active = DTC_ACTIVE;
+                DTCStorage[i].debugVal = DebugValue;
+                DTCStorage[i].severity = DTC_severity;
                 return;
             }
         }
@@ -83,3 +88,52 @@ DTCNums_t getlastDTC(boolean only_active)
 
     return pointer >= 0 ? DTCStorage[pointer].Number : DTC_LAST_DTC;
 }
+
+DTCNums_t getlastDTC_Severity(boolean only_active, DTCSeverity_t severity)
+{
+    int8_t pointer = -1;
+    uint32_t lasttimestamp = 0;
+
+    for (int i = 0; i < MAX_DTC_STORAGE; i++)
+    {
+        if (DTCStorage[i].Number > 0 && DTCStorage[i].timestamp > lasttimestamp)
+        {
+            if ((only_active == false || DTCStorage[i].active == DTC_ACTIVE) && DTCStorage[i].severity == severity)
+            {
+                pointer = i;
+                lasttimestamp = DTCStorage[i].timestamp;
+            }
+        }
+    }
+
+    return pointer >= 0 ? DTCStorage[pointer].Number : DTC_LAST_DTC;
+}
+
+void DTC_Process()
+{
+    static tSystem_Status preserverSysStatusError;
+
+    if (getlastDTC(false) < DTC_LAST_DTC)
+    {
+        globals.hasDTC = true;
+        if (getlastDTC_Severity(true, DTC_CRITICAL) < DTC_LAST_DTC && globals.systemStatus != sysStat_Shutdown)
+        {
+            if (globals.systemStatus != sysStat_Error)
+            {
+                preserverSysStatusError = globals.systemStatus;
+            }
+            globals.systemStatus = sysStat_Error;
+        }
+        else
+        {
+            if (globals.systemStatus == sysStat_Error)
+            {
+                globals.systemStatus = preserverSysStatusError;
+            }
+        }
+    }
+    else
+    {
+        globals.hasDTC = false;
+    }
+}

Software/src/dtc.h

@@ -1,39 +0,0 @@
-#ifndef _DTC_H_
-#define _DTC_H_
-
-#include <Arduino.h>
-
-#define MAX_DTC_STORAGE 6
-
-typedef enum DTCNums_e
-{
-  DTC_NO_EEPROM_FOUND,
-  DTC_EEPROM_CFG_BAD,
-  DTC_EEPROM_PDS_BAD,
-  DTC_EEPROM_VERSION_BAD,
-  DTC_EEPROM_WORNOUT,                 // this will happen if the EEPROM-cells are all overwritten 1 million times!
-  DTC_EEPROM_PDS_MARKER_INVALID,      // This happens if the Marker of the PersistanceData was pointing to an EE-Adress bigger than the used EEPROM-IC
-  DTC_LAST_DTC
-} DTCNums_t;
-
-typedef enum DTCActive_e
-{
-  DTC_ACTIVE,
-  DTC_PREVIOUS,
-  DTC_NONE
-} DTCActive_t;
-
-typedef struct DTCEntry_s
-{
-  DTCNums_t Number;
-  uint32_t timestamp;
-  DTCActive_t active;
-} DTCEntry_t;
-
-void MaintainDTC(DTCNums_t DTC_no, boolean active);
-void ClearDTC(DTCNums_t DTC_no);
-void ClearAllDTC();
-DTCNums_t getlastDTC(boolean only_active);
-
-extern DTCEntry_s DTCStorage[MAX_DTC_STORAGE];
-#endif

Software/src/eeprom.cpp

@@ -0,0 +1,358 @@
+#include "eeprom.h"
+
+I2C_eeprom ee(I2C_EE_ADDRESS, EEPROM_SIZE_BYTES);
+
+configData_t ConfigData;
+persistenceData_t PersistenceData;
+bool eeAvailable = false;
+
+bool checkEEPROMavailable();
+bool ValidateEEPROM_Version();
+bool MigrateEEPROM(uint8_t fromVersion);
+
+void InitEEPROM()
+{
+  ee.begin();
+  eeAvailable = checkEEPROMavailable();
+  eeAvailable = ValidateEEPROM_Version();
+	Serial.printf("Initialized EEPROM at Address 0x%02X\n", I2C_EE_ADDRESS);
+}
+
+void EEPROM_Process()
+{
+  if (eeAvailable == false)
+    return;
+
+  switch (globals.requestEEAction)
+  {
+  case EE_CFG_SAVE:
+    StoreConfig_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    Serial.println("Stored EEPROM CFG");
+    break;
+  case EE_CFG_LOAD:
+    GetConfig_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    Serial.println("Loaded EEPROM CFG");
+    break;
+  case EE_CFG_FORMAT:
+    FormatConfig_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    globals.systemStatus = sysStat_Shutdown;
+    Serial.println("Formated EEPROM CFG");
+    break;
+  case EE_PDS_SAVE:
+    StorePersistence_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    Serial.println("Stored EEPROM PDS");
+    break;
+  case EE_PDS_LOAD:
+    GetPersistence_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    Serial.println("Loaded EEPROM PDS");
+    break;
+  case EE_PDS_FORMAT:
+    FormatPersistence_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    Serial.println("Formated EEPROM PDS");
+    break;
+  case EE_FORMAT_ALL:
+    FormatConfig_EEPROM();
+    FormatPersistence_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    Serial.println("Formated EEPROM ALL");
+    break;
+  case EE_ALL_SAVE:
+    StorePersistence_EEPROM();
+    StoreConfig_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    Serial.println("Stored EEPROM ALL");
+    break;
+  case EE_IDLE:
+  default:
+    globals.requestEEAction = EE_IDLE;
+  }
+}
+
+void StoreConfig_EEPROM()
+{
+  if (eeAvailable == false)
+    return;
+
+  ConfigData.checksum = 0;
+  ConfigData.checksum = Checksum_EEPROM((uint8_t *)&ConfigData, sizeof(ConfigData));
+
+  ee.updateBlock(startofConfigData, (uint8_t *)&ConfigData, sizeof(ConfigData));
+}
+
+void GetConfig_EEPROM()
+{
+  if (eeAvailable == false)
+    return;
+
+  ee.readBlock(startofConfigData, (uint8_t *)&ConfigData, sizeof(ConfigData));
+
+  uint32_t checksum = ConfigData.checksum;
+  ConfigData.checksum = 0;
+
+  if (Checksum_EEPROM((uint8_t *)&ConfigData, sizeof(ConfigData)) != checksum)
+  {
+    MaintainDTC(DTC_EEPROM_CFG_BAD, DTC_CRITICAL, true);
+  }
+  ConfigData.checksum = checksum;
+
+  uint32_t ConfigSanityCheckResult = ConfigSanityCheck(false);
+
+  if (ConfigSanityCheckResult > 0)
+  {
+    MaintainDTC(DTC_EEPROM_CFG_SANITY, DTC_WARN, true, ConfigSanityCheckResult);
+    globals.requestEEAction = EE_CFG_SAVE;
+  }
+}
+
+void StorePersistence_EEPROM()
+{
+  if (eeAvailable == false)
+    return;
+
+  if (PersistenceData.writeCycleCounter >= 0xFFF0)
+    MovePersistencePage_EEPROM(false);
+  else
+    PersistenceData.writeCycleCounter++;
+
+  PersistenceData.checksum = 0;
+  PersistenceData.checksum = Checksum_EEPROM((uint8_t *)&PersistenceData, sizeof(PersistenceData));
+
+  ee.updateBlock(globals.eePersistanceAdress, (uint8_t *)&PersistenceData, sizeof(PersistenceData));
+}
+
+void GetPersistence_EEPROM()
+{
+  if (eeAvailable == false)
+    return;
+
+  ee.readBlock(0, (uint8_t *)&globals.eePersistanceAdress, sizeof(globals.eePersistanceAdress));
+  // if we got the StartAdress of Persistance and it's out of Range - we Reset it and store defaults
+  // otherwise we Read from eeprom and check if everything is correct
+  if (globals.eePersistanceAdress < startofPersistence || globals.eePersistanceAdress > ee.getDeviceSize())
+  {
+    MovePersistencePage_EEPROM(true);
+    FormatPersistence_EEPROM();
+    MaintainDTC(DTC_EEPROM_PDSADRESS_BAD, DTC_CRITICAL, true);
+  }
+  else
+  {
+    ee.readBlock(globals.eePersistanceAdress, (uint8_t *)&PersistenceData, sizeof(PersistenceData));
+
+    uint32_t checksum = PersistenceData.checksum;
+    PersistenceData.checksum = 0;
+
+    if (Checksum_EEPROM((uint8_t *)&PersistenceData, sizeof(PersistenceData)) != checksum)
+    {
+      MaintainDTC(DTC_EEPROM_PDS_BAD, DTC_CRITICAL, true);
+    }
+    PersistenceData.checksum = checksum;
+  }
+}
+
+void FormatConfig_EEPROM()
+{
+  if (eeAvailable == false)
+    return;
+
+  Serial.println("Formatting Config-Partition");
+  ConfigData = ConfigData_defaults;
+  StoreConfig_EEPROM();
+  GetConfig_EEPROM();
+}
+
+void FormatPersistence_EEPROM()
+{
+  if (eeAvailable == false)
+    return;
+
+  Serial.println("Formatting Persistance-Partition");
+  PersistenceData = {0};
+  StorePersistence_EEPROM();
+  GetPersistence_EEPROM();
+}
+
+void MovePersistencePage_EEPROM(boolean reset)
+{
+  if (eeAvailable == false)
+    return;
+
+  globals.eePersistanceAdress = +sizeof(PersistenceData);
+  PersistenceData.writeCycleCounter = 0;
+
+  // check if we reached the End of the EEPROM and Startover at the beginning
+  if ((globals.eePersistanceAdress + sizeof(PersistenceData)) > ee.getDeviceSize() || reset)
+  {
+    globals.eePersistanceAdress = startofPersistence;
+  }
+
+  ee.updateBlock(0, (uint8_t *)&globals.eePersistanceAdress, sizeof(globals.eePersistanceAdress));
+}
+
+uint32_t Checksum_EEPROM(uint8_t const *data, size_t len)
+{
+  if (data == NULL)
+    return 0;
+  uint32_t crc, mask;
+  crc = 0xFFFFFFFF;
+
+  while (len--)
+  {
+    crc ^= *data++;
+    for (uint8_t k = 0; k < 8; k++)
+    {
+      mask = -(crc & 1);
+      crc = (crc >> 1) ^ (0xEDB88320 & mask);
+    }
+  }
+  return ~crc;
+}
+
+void dumpEEPROM(uint16_t memoryAddress, uint16_t length)
+{
+#define BLOCK_TO_LENGTH 16
+
+  if (eeAvailable == false)
+    return;
+
+  char ascii_buf[BLOCK_TO_LENGTH + 1];
+  sprintf(ascii_buf, "%*s", BLOCK_TO_LENGTH, "ASCII");
+  Serial.print(PSTR("\nAddress "));
+  for (int x = 0; x < BLOCK_TO_LENGTH; x++)
+    Serial.printf("%3d", x);
+
+  memoryAddress = memoryAddress / BLOCK_TO_LENGTH * BLOCK_TO_LENGTH;
+  length = (length + BLOCK_TO_LENGTH - 1) / BLOCK_TO_LENGTH * BLOCK_TO_LENGTH;
+
+  for (unsigned int i = 0; i < length; i++)
+  {
+    int blockpoint = memoryAddress % BLOCK_TO_LENGTH;
+    if (blockpoint == 0)
+    {
+      ascii_buf[BLOCK_TO_LENGTH] = 0;
+      Serial.printf("  %s", ascii_buf);
+      Serial.printf("\n0x%05X:", memoryAddress);
+    }
+    ascii_buf[blockpoint] = ee.readByte(memoryAddress);
+    Serial.printf(" %02X", ascii_buf[blockpoint]);
+    if (ascii_buf[blockpoint] < 0x20 || ascii_buf[blockpoint] > 0x7E)
+      ascii_buf[blockpoint] = '.';
+    memoryAddress++;
+  }
+  Serial.println();
+}
+
+bool checkEEPROMavailable()
+{
+  if (!ee.isConnected())
+  {
+    MaintainDTC(DTC_NO_EEPROM_FOUND, DTC_CRITICAL, true);
+    return false;
+  }
+  return true;
+}
+
+uint32_t ConfigSanityCheck(bool autocorrect)
+{
+  uint32_t setting_reset_bits = 0;
+
+  if ((ConfigData.batteryType != BATTERY_LIPO_2S) || (ConfigData.batteryType != BATTERY_LIPO_3S))
+  {
+    setting_reset_bits = setting_reset_bits | (1 << 0);
+    if (autocorrect)
+      ConfigData.batteryType = ConfigData_defaults.batteryType;
+  }
+
+  return setting_reset_bits;
+}
+
+bool ValidateEEPROM_Version()
+{
+  if (eeAvailable == false)
+    return false;
+
+  uint8_t EEPROMVersionOnChip = ee.readByte(startofConfigData);
+
+  if (EEPROMVersionOnChip < ConfigData_defaults.EEPROM_Version)
+  {
+    Serial.printf("EEPROM Image Version is %d, but %d expected - trying to migrate\n", EEPROMVersionOnChip, ConfigData_defaults.EEPROM_Version);
+    if (!MigrateEEPROM(EEPROMVersionOnChip))
+    {
+      Serial.print("Error\n");
+      MaintainDTC(DTC_EEPROM_MIGRATE_FAILED, DTC_CRITICAL, true, EEPROMVersionOnChip);
+      return false;
+    }
+    else
+    {
+      Serial.print("Success\n");
+    }
+  }
+  return true;
+}
+
+bool MigrateEEPROM(uint8_t fromVersion)
+{
+  uint16_t persistanceMarker_onChip;
+
+  switch (fromVersion)
+  {
+
+    // Version 1 EEPROM Layout:                             startAdress     size (byte)
+    //  const uint16_t startofConfigData  =                 16               16
+    //  const uint16_t startofPersistence =                 32               24
+    //
+    //  typedef struct
+    //  {
+    //    uint8_t EEPROM_Version = 1;                       16                1
+    //    batteryType_t batteryType = BATTERY_UNDEFINED;    17                4
+    //    bool active_faction_on_reboot = false;            21                1
+    //    uint32_t checksum = 0;                            22                4
+    //  } configData_t;
+    //
+    //  typedef struct                                      offset
+    //  {
+    //    uint32_t writeCycleCounter = 0;                   0                 4
+    //    uint32_t faction_1_timer = 0;                     4                 4
+    //    uint32_t faction_2_timer = 0;                     8                 4
+    //    uint32_t faction_3_timer = 0;                     12                4
+    //    factions_t activeFaction = NONE;                  16                4
+    //    uint32_t checksum = 0;                            20                4
+    //  } persistenceData_t;
+
+  case 1:
+    // Migrate Persistance-Data
+    ee.readBlock(0, (uint8_t *)&persistanceMarker_onChip, sizeof(uint16_t));
+    if (persistanceMarker_onChip < startofPersistence)
+    {
+      ee.readBlock(persistanceMarker_onChip + 0, (uint8_t *)&PersistenceData.writeCycleCounter, 4);
+      ee.readBlock(persistanceMarker_onChip + 4, (uint8_t *)&PersistenceData.faction_1_timer, 4);
+      ee.readBlock(persistanceMarker_onChip + 8, (uint8_t *)&PersistenceData.faction_2_timer, 4);
+      ee.readBlock(persistanceMarker_onChip + 12, (uint8_t *)&PersistenceData.faction_3_timer, 4);
+      ee.readBlock(persistanceMarker_onChip + 16, (uint8_t *)&PersistenceData.activeFaction, 4);
+      ee.readBlock(persistanceMarker_onChip + 20, (uint8_t *)&PersistenceData.checksum, 4);
+      MovePersistencePage_EEPROM(true);
+      StorePersistence_EEPROM();
+    }
+
+    // Migrate Config-Data and set defaults for Values which doesn't exists in this earlier Version
+    ConfigData.EEPROM_Version = ConfigData_defaults.EEPROM_Version;
+    strncpy(ConfigData.Faction_1_Name, ConfigData_defaults.Faction_1_Name, sizeof(ConfigData.Faction_1_Name));
+    strncpy(ConfigData.Faction_2_Name, ConfigData_defaults.Faction_2_Name, sizeof(ConfigData.Faction_2_Name));
+    strncpy(ConfigData.Faction_3_Name, ConfigData_defaults.Faction_3_Name, sizeof(ConfigData.Faction_3_Name));
+    ee.readBlock(17, (uint8_t *)&ConfigData.batteryType, 4);
+    ee.readBlock(21, (uint8_t *)&ConfigData.active_faction_on_reboot, 1);
+    StoreConfig_EEPROM();
+
+    return true;
+    break;
+
+  default:
+    return false;
+    break;
+  }
+}

Software/src/globals.cpp

@@ -0,0 +1,9 @@
+#include "globals.h"
+
+Globals_t globals;
+
+void initGlobals()
+{
+  globals.systemStatus = sysStat_Startup;
+  globals.requestEEAction = EE_IDLE;
+}

Software/src/globals.h

@@ -1,36 +0,0 @@
-#ifndef _GLOBALS_H_
-#define _GLOBALS_H_
-
-#include <Arduino.h>
-
-typedef enum eSystem_Status
-{
-  sysStat_Startup,
-  sysStat_Normal,
-  sysStat_Error,
-  sysStat_Shutdown
-} tSystem_Status;
-
-typedef enum eEERequest
-{
-  EE_IDLE,
-  EE_CFG_SAVE,
-  EE_CFG_LOAD,
-  EE_PDS_SAVE,
-  EE_PDS_LOAD
-} tEERequest;
-
-typedef struct Globals_s
-{
-  char DeviceName[33];
-  char DeviceName_ID[43];
-  tSystem_Status systemStatus = sysStat_Startup;
-  tSystem_Status resumeStatus = sysStat_Startup;
-  eEERequest requestEEAction = EE_IDLE;
-  float loadvoltage = 0;
-  int battery_level = 0;
-} Globals_t;
-
-extern Globals_t globals;
-
-#endif

Software/src/lora_net.cpp

@@ -1,20 +1,305 @@
 #include "lora_net.h"
 
-uint8_t LoRa_Init()
+#ifdef FEATURE_ENABLE_LORA
+LoRa_E220 e220ttl(GPIO_LORA_TX, GPIO_LORA_RX, GPIO_LORA_AUX, 3, 4); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
+void printParameters(struct Configuration configuration);
+void printModuleInformation(struct ModuleInformation moduleInformation);
+#elif defined(FEATURE_ENABLE_UARTLORA)
+SoftwareSerial SerialLoRa(GPIO_LORA_RX, GPIO_LORA_TX); // RX, TX
+void Parse_LoRa_UartCommand(char input[], int size);
+#endif
+
+bool InitLoRa(void (*MPinHelper)(int, int))
 {
-  uint8_t success = false;
+    bool returnval = false;
-  // SPI LoRa pins
-  SPI.begin(LORA_SCK, LORA_MISO, LORA_MOSI, LORA_SS);
-  // setup LoRa transceiver module
-  LoRa.setPins(LORA_SS, LORA_RST, LORA_DIO0);
 
-  if (!LoRa.begin(LORA_BAND))
+#ifdef FEATURE_ENABLE_LORA
-  {
-    Serial.println("Starting LoRa failed!");
-    success = false;
-  }
-  Serial.println("LoRa Initializing OK!");
-  success = true;
 
-  return success;
+    e220ttl.setMPins = MPinHelper;
+    returnval = e220ttl.begin();
+
+    if (returnval == true)
+    {
+        ResponseStructContainer c;
+        c = e220ttl.getConfiguration();
+        // It's important get configuration pointer before all other operation
+        Configuration configuration = *(Configuration *)c.data;
+        Serial.println(c.status.getResponseDescription());
+        Serial.println(c.status.code);
+
+        ResponseStructContainer cMi;
+        cMi = e220ttl.getModuleInformation();
+        // It's important get information pointer before all other operation
+        // ModuleInformation mi = *(ModuleInformation *)cMi.data;
+
+        Serial.println(cMi.status.getResponseDescription());
+        Serial.println(cMi.status.code);
+
+        //	----------------------- DEFAULT TRANSPARENT WITH RSSI -----------------------
+        configuration.ADDL = 0x02;
+        configuration.ADDH = 0x00;
+
+        configuration.CHAN = 23;
+
+        configuration.SPED.uartBaudRate = UART_BPS_9600;
+        configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+        configuration.SPED.uartParity = MODE_00_8N1;
+
+        configuration.OPTION.subPacketSetting = SPS_200_00;
+        configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_ENABLED;
+        configuration.OPTION.transmissionPower = POWER_22;
+
+        configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+        configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+        configuration.TRANSMISSION_MODE.enableLBT = LBT_ENABLED;
+        configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+
+        // Set configuration changed and set to not hold the configuration
+        ResponseStatus rs = e220ttl.setConfiguration(configuration, WRITE_CFG_PWR_DWN_LOSE);
+        Serial.println(rs.getResponseDescription());
+        Serial.println(rs.code);
+        c.close();
+
+        printParameters(configuration);
+    }
+    else
+    {
+        MaintainDTC(DTC_NO_LORA_FOUND, DTC_WARN, true);
+    }
+#elif defined(FEATURE_ENABLE_UARTLORA)
+    SerialLoRa.begin(9600);
+#endif
+    return returnval;
 }
+
+void LoRa_Process()
+{
+#ifdef FEATURE_ENABLE_LORA
+    if (e220ttl.available() > 1)
+    {
+        ResponseContainer rc = e220ttl.receiveMessageRSSI();
+        // Is something goes wrong print error
+        if (rc.status.code != 1)
+        {
+            Serial.println(rc.status.getResponseDescription());
+        }
+        else
+        {
+            // Print the data received
+            Serial.println(rc.status.getResponseDescription());
+            Serial.println(rc.data);
+            Serial.print("RSSI: ");
+            Serial.println(rc.rssi, DEC);
+        }
+    }
+#elif defined(FEATURE_ENABLE_UARTLORA)
+
+    char packageInput[16];
+    bool packageRecieved = false;
+    unsigned int bufferPtr = 0;
+
+    if (SerialLoRa.available() && packageRecieved == false)
+    {
+        while (bufferPtr < sizeof(packageInput))
+        {
+            packageInput[bufferPtr] = SerialLoRa.read();
+            if (packageInput[bufferPtr] == '\n')
+            {
+                packageInput[bufferPtr] = 0; // terminate String
+                packageRecieved = true;
+                Debug_pushMessage("Got LoRa UART: %s\n", packageInput);
+                break;
+            }
+            else if ((packageInput[bufferPtr] >= 0x30) || (packageInput[bufferPtr] <= 0x5A)) // only accept Numbers, UpperCase-Letters and some special chars
+            {
+                if (bufferPtr < sizeof(packageInput) - 1)
+                {
+                    bufferPtr++;
+                }
+                else
+                {
+                    packageInput[bufferPtr] = 0; // terminate String, bc Buffer is full (package to long)
+                    packageRecieved = true;      // send it anyway to the parser
+                    Debug_pushMessage("Got LoRa UART: %s\n", packageInput);
+                    break;
+                }
+            }
+        }
+    }
+
+    if (packageRecieved)
+        Parse_LoRa_UartCommand(packageInput, bufferPtr);
+
+#endif
+}
+
+void sendStatus_LoRa()
+{
+#ifdef FEATURE_ENABLE_LORA
+    struct
+    {
+        MessageType_t type = "STATUS";
+        MessageStatus_t status;
+    } __attribute__((packed)) sendStatus;
+
+    sendStatus.status.nodeid = 0x0002;
+    sendStatus.status.millis = millis();
+    sendStatus.status.faction_active = 1;
+    sendStatus.status.faction_1_timer = 0xBBBBBBBB;
+    sendStatus.status.faction_2_timer = 0xCCCCCCCC;
+    sendStatus.status.faction_3_timer = 0xDDDDDDDD;
+
+    ResponseStatus rs = e220ttl.sendFixedMessage(0xFF, 0xFF, 23, (byte *)&sendStatus, sizeof(sendStatus));
+    Serial.println(rs.getResponseDescription());
+
+#elif defined(FEATURE_ENABLE_UARTLORA)
+
+    SerialLoRa.print(PersistenceData.faction_1_timer);
+    SerialLoRa.write(";");
+    SerialLoRa.print(PersistenceData.faction_2_timer);
+    SerialLoRa.write(";");
+    SerialLoRa.print(PersistenceData.faction_3_timer);
+    SerialLoRa.write(";");
+    SerialLoRa.print(PersistenceData.activeFaction);
+    SerialLoRa.write(";");
+    SerialLoRa.print(globals.battery_level);
+    SerialLoRa.write('\n');
+
+#endif
+}
+
+#ifdef FEATURE_ENABLE_LORA
+
+void printParameters(struct Configuration configuration)
+{
+    Serial.println("----------------------------------------");
+
+    Serial.print(F("HEAD : "));
+    Serial.print(configuration.COMMAND, HEX);
+    Serial.print(" ");
+    Serial.print(configuration.STARTING_ADDRESS, HEX);
+    Serial.print(" ");
+    Serial.println(configuration.LENGHT, HEX);
+    Serial.println(F(" "));
+    Serial.print(F("AddH : "));
+    Serial.println(configuration.ADDH, HEX);
+    Serial.print(F("AddL : "));
+    Serial.println(configuration.ADDL, HEX);
+    Serial.println(F(" "));
+    Serial.print(F("Chan : "));
+    Serial.print(configuration.CHAN, DEC);
+    Serial.print(" -> ");
+    Serial.println(configuration.getChannelDescription());
+    Serial.println(F(" "));
+    Serial.print(F("SpeedParityBit     : "));
+    Serial.print(configuration.SPED.uartParity, BIN);
+    Serial.print(" -> ");
+    Serial.println(configuration.SPED.getUARTParityDescription());
+    Serial.print(F("SpeedUARTDatte     : "));
+    Serial.print(configuration.SPED.uartBaudRate, BIN);
+    Serial.print(" -> ");
+    Serial.println(configuration.SPED.getUARTBaudRateDescription());
+    Serial.print(F("SpeedAirDataRate   : "));
+    Serial.print(configuration.SPED.airDataRate, BIN);
+    Serial.print(" -> ");
+    Serial.println(configuration.SPED.getAirDataRateDescription());
+    Serial.println(F(" "));
+    Serial.print(F("OptionSubPacketSett: "));
+    Serial.print(configuration.OPTION.subPacketSetting, BIN);
+    Serial.print(" -> ");
+    Serial.println(configuration.OPTION.getSubPacketSetting());
+    Serial.print(F("OptionTranPower    : "));
+    Serial.print(configuration.OPTION.transmissionPower, BIN);
+    Serial.print(" -> ");
+    Serial.println(configuration.OPTION.getTransmissionPowerDescription());
+    Serial.print(F("OptionRSSIAmbientNo: "));
+    Serial.print(configuration.OPTION.RSSIAmbientNoise, BIN);
+    Serial.print(" -> ");
+    Serial.println(configuration.OPTION.getRSSIAmbientNoiseEnable());
+    Serial.println(F(" "));
+    Serial.print(F("TransModeWORPeriod : "));
+    Serial.print(configuration.TRANSMISSION_MODE.WORPeriod, BIN);
+    Serial.print(" -> ");
+    Serial.println(configuration.TRANSMISSION_MODE.getWORPeriodByParamsDescription());
+    Serial.print(F("TransModeEnableLBT : "));
+    Serial.print(configuration.TRANSMISSION_MODE.enableLBT, BIN);
+    Serial.print(" -> ");
+    Serial.println(configuration.TRANSMISSION_MODE.getLBTEnableByteDescription());
+    Serial.print(F("TransModeEnableRSSI: "));
+    Serial.print(configuration.TRANSMISSION_MODE.enableRSSI, BIN);
+    Serial.print(" -> ");
+    Serial.println(configuration.TRANSMISSION_MODE.getRSSIEnableByteDescription());
+    Serial.print(F("TransModeFixedTrans: "));
+    Serial.print(configuration.TRANSMISSION_MODE.fixedTransmission, BIN);
+    Serial.print(" -> ");
+    Serial.println(configuration.TRANSMISSION_MODE.getFixedTransmissionDescription());
+
+    Serial.println("----------------------------------------");
+}
+#endif
+
+#ifdef FEATURE_ENABLE_UARTLORA
+void Parse_LoRa_UartCommand(char input[], int size)
+{
+
+    char delimiter[] = ";";
+    char *ptr;
+    char command[8];
+    char value[8];
+
+    ptr = strtok(input, delimiter);
+
+    while (ptr != NULL)
+    {
+        strncpy(command, ptr, sizeof(command));
+        ptr = strtok(NULL, delimiter);
+        strncpy(value, ptr, sizeof(value));
+    }
+
+    Debug_pushMessage("Parsed LoRa UART Command:  %s Value: %s\n", command, value);
+
+    if (!strcmp(command, "ENABLE"))
+    {
+        globals.timer_disabled = false;
+    }
+    else if (!strcmp(command, "DISABLE"))
+    {
+        globals.timer_disabled = false;
+    }
+    else if (!strcmp(command, "RESET"))
+    {
+        PersistenceData.activeFaction = NONE;
+        PersistenceData.faction_1_timer = 0;
+        PersistenceData.faction_2_timer = 0;
+        PersistenceData.faction_3_timer = 0;
+    }
+    else if (!strcmp(command, "TMRSTP"))
+    {
+        PersistenceData.activeFaction = NONE;
+    }
+    else if (!strcmp(command, "TMR1"))
+    {
+        PersistenceData.faction_1_timer = atol(value);
+    }
+    else if (!strcmp(command, "TMR2"))
+    {
+        PersistenceData.faction_2_timer = atol(value);
+    }
+    else if (!strcmp(command, "TMR3"))
+    {
+        PersistenceData.faction_3_timer = atol(value);
+    }
+    else if (!strcmp(command, "EFAC1"))
+    {
+        PersistenceData.activeFaction = FACTION_1;
+    }
+    else if (!strcmp(command, "EFAC2"))
+    {
+        PersistenceData.activeFaction = FACTION_2;
+    }
+    else if (!strcmp(command, "EFAC3"))
+    {
+        PersistenceData.activeFaction = FACTION_3;
+    }
+}
+#endif

Software/src/lora_net.h

@@ -1,23 +0,0 @@
-#ifndef _LORA_NET_H_
-#define _LORA_NET_H_
-
-#include <Arduino.h>
-#include <SPI.h>
-#include <LoRa.h>
-
-// define the pins used by the LoRa transceiver module
-#define LORA_SCK 5
-#define LORA_MISO 19
-#define LORA_MOSI 27
-#define LORA_SS 18
-#define LORA_RST 14
-#define LORA_DIO0 26
-
-// 433E6 for Asia
-// 866E6 for Europe
-// 915E6 for North America
-#define LORA_BAND 8681E5
-
-uint8_t LoRa_Init();
-
-#endif

Software/src/oled_display.cpp

@@ -33,10 +33,10 @@ void OLED_Process()
     display.setCursor(0, 0);
     display.printf("LiPo: %d%%\n", globals.battery_level);
     display.print(PersistenceData.activeFaction == FACTION_1 ? "> " : "  ");
-    display.printf("%-5s: %02d:%02d:%02d\n", FACTION_1_NAME, PersistenceData.faction_1_timer / 3600, (PersistenceData.faction_1_timer / 60) % 60, PersistenceData.faction_1_timer % 60);
+    display.printf("%-5s: %02d:%02d:%02d\n", PersistenceData.faction_1_timer, PersistenceData.faction_1_timer / 3600, (PersistenceData.faction_1_timer / 60) % 60, PersistenceData.faction_1_timer % 60);
     display.print(PersistenceData.activeFaction == FACTION_2 ? "> " : "  ");
-    display.printf("%-5s: %02d:%02d:%02d\n", FACTION_2_NAME, PersistenceData.faction_2_timer / 3600, (PersistenceData.faction_2_timer / 60) % 60, PersistenceData.faction_2_timer % 60);
+    display.printf("%-5s: %02d:%02d:%02d\n", PersistenceData.faction_2_timer, PersistenceData.faction_2_timer / 3600, (PersistenceData.faction_2_timer / 60) % 60, PersistenceData.faction_2_timer % 60);
     display.print(PersistenceData.activeFaction == FACTION_3 ? "> " : "  ");
-    display.printf("%-5s: %02d:%02d:%02d\n", FACTION_3_NAME, PersistenceData.faction_3_timer / 3600, (PersistenceData.faction_3_timer / 60) % 60, PersistenceData.faction_3_timer % 60);
+    display.printf("%-5s: %02d:%02d:%02d\n", PersistenceData.faction_3_timer, PersistenceData.faction_3_timer / 3600, (PersistenceData.faction_3_timer / 60) % 60, PersistenceData.faction_3_timer % 60);
     display.display();
 }

Software/src/webui.cpp

@@ -2,86 +2,120 @@
 
 AsyncWebServer webServer(80);
 
-typedef enum
+const char *PARAM_MESSAGE = "message";
-{
-  RESPMSG_HIDE,
-  RESPMSG_SUCCESS,
-  RESPMSG_INFO,
-  RESPMSG_WARNING,
-  RESPMSG_DANGER
-} statusResponseMessage_Type_t;
-char StatusResponseMessage[64];
-statusResponseMessage_Type_t StatusResponseMessage_Type = RESPMSG_INFO;
 
 String processor(const String &var);
 void WebserverPOST_Callback(AsyncWebServerRequest *request);
 void WebserverNotFound_Callback(AsyncWebServerRequest *request);
 void Webserver_Callback(AsyncWebServerRequest *request);
-void WebserverCommands_Callback(String input);
+void WebserverFirmwareUpdate_Callback(AsyncWebServerRequest *request, const String &filename, size_t index, uint8_t *data, size_t len, bool final);
+void WebserverEERestore_Callback(AsyncWebServerRequest *request, const String &filename, size_t index, uint8_t *data, size_t len, bool final);
+void WebServerEEJSON_Callback(AsyncWebServerRequest *request);
+void GetFlashVersion(char *buff, size_t buff_size);
+
+AsyncWebSocket webSocket("/ws");
+
+void WebsocketEvent_Callback(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len);
+void Websocket_HandleMessage(void *arg, uint8_t *data, size_t len);
 
 void initWebUI()
 {
   if (!LittleFS.begin())
   {
-    Serial.println("An Error has occurred while mounting LittleFS");
+    Debug_pushMessage("An Error has occurred while mounting LittleFS\n");
+    MaintainDTC(DTC_FLASHFS_ERROR, DTC_CRITICAL, true);
     return;
   }
 
+  GetFlashVersion(globals.FlashVersion, sizeof(globals.FlashVersion));
+
+  char buffer[6];
+  snprintf(buffer, sizeof(buffer), "%d.%02d", constants.Required_Flash_Version_major, constants.Required_Flash_Version_minor);
+  if (strcmp(globals.FlashVersion, buffer))
+  {
+    MaintainDTC(DTC_FLASHFS_VERSION_ERROR, DTC_WARN, true);
+  }
+
+  MDNS.begin(globals.DeviceName);
+  MDNS.addService("http", "tcp", 80);
+
+  webSocket.onEvent(WebsocketEvent_Callback);
+  webServer.addHandler(&webSocket);
+
   webServer.serveStatic("/static/", LittleFS, "/static/").setCacheControl("max-age=360000");
   webServer.on("/", HTTP_GET, [](AsyncWebServerRequest *request)
                { request->redirect("/index.htm"); });
   webServer.onNotFound(WebserverNotFound_Callback);
   webServer.on("/index.htm", HTTP_GET, Webserver_Callback);
-  webServer.on("/index.htm", HTTP_POST, WebserverPOST_Callback);
+  webServer.on("/post.htm", HTTP_POST, WebserverPOST_Callback);
+  webServer.on("/eejson", HTTP_GET, WebServerEEJSON_Callback);
+  webServer.on(
+      "/doUpdate", HTTP_POST, [](AsyncWebServerRequest *request) {}, WebserverFirmwareUpdate_Callback);
+  webServer.on(
+      "/eeRestore", HTTP_POST, [](AsyncWebServerRequest *request) {}, WebserverEERestore_Callback);
 
   webServer.begin();
 }
 
+void Webserver_Process()
+{
+  webSocket.cleanupClients();
+}
 String processor(const String &var)
 {
+  if (var == "HOSTNAME")
+    return String(globals.DeviceName);
+  if (var == "SYSTEM_STATUS")
+    return String(sSystem_Status_txt[globals.systemStatus]);
+  if (var == "SW_VERSION")
+  {
+    char buffer[6];
+    snprintf(buffer, sizeof(buffer), "%d.%02d", constants.FW_Version_major, constants.FW_Version_minor);
+    return String(buffer);
+  }
+  if (var == "FS_VERSION")
+    return String(globals.FlashVersion);
+  if (var == "GIT_REV")
+    return String(constants.GitHash);
+
   if (var == "SHOW_DTC_TABLE")
     return globals.systemStatus == sysStat_Error ? "" : "hidden";
-
-  if (var == "SHOW_RESP_MESSAGE")
-    return StatusResponseMessage_Type != RESPMSG_HIDE ? "" : "hidden";
-
-  if (var == "RESP_MESSAGE_TYPE")
-  {
-    switch (StatusResponseMessage_Type)
-    {
-    case RESPMSG_SUCCESS:
-      return "success";
-    case RESPMSG_INFO:
-      return "info";
-    case RESPMSG_WARNING:
-      return "warning";
-    case RESPMSG_DANGER:
-      return "danger";
-    default:
-      return "info";
-    }
-  }
-
-  if (var == "RESP_MESSAGE")
-    return String(StatusResponseMessage);
-
   if (var == "BAT_REMAIN_CAPACITY")
     return String(globals.battery_level);
-
+  if (var == "DEVICENAME")
-  if (var == "DEVICE_NAME")
     return String(globals.DeviceName);
-
+  if (var == "DEVICENAME_ID")
+    return String(globals.DeviceName_ID);
+  if (var == "BATTERY_TYPE")
+    return String(ConfigData.batteryType);
   if (var == "BAT_VOLTAGE")
-    return String(globals.loadvoltage);
+    return String((float)globals.loadvoltage_mV / 1000.0);
-
+  if (var == "PERSISTANCE_CHECKSUM")
+  {
+    char buffer[7];
+    sprintf(buffer, "0x%04X", PersistenceData.checksum);
+    return String(buffer);
+  }
+  if (var == "WRITE_CYCLE_COUNT")
+    return String(PersistenceData.writeCycleCounter);
+  if (var == "PERSISTENCE_MARKER")
+    return String(globals.eePersistanceAdress);
+  if (var == "EEPROM_VERSION")
+    return String(ConfigData.EEPROM_Version);
+  if (var == "CONFIG_CHECKSUM")
+  {
+    char buffer[7];
+    sprintf(buffer, "0x%04X", ConfigData.checksum);
+    return String(buffer);
+  }
   if (var == "DTC_TABLE")
   {
-    String temp;
+    String temp = "";
     char buff_timestamp[16]; // Format: DD-hh:mm:ss:xxx
 
     for (uint32_t i = 0; i < MAX_DTC_STORAGE; i++)
     {
-      if (DTCStorage[i].Number > 0)
+      if (DTCStorage[i].Number < DTC_LAST_DTC)
       {
         sprintf(buff_timestamp, "%02d-%02d:%02d:%02d:%03d",
                 DTCStorage[i].timestamp / 86400000,    // Days
@@ -90,8 +124,23 @@ String processor(const String &var)
                 DTCStorage[i].timestamp / 1000 % 60,   // Seconds
                 DTCStorage[i].timestamp % 1000);       // milliseconds
 
-        temp = "<tr><td>" + String(buff_timestamp);
+        temp = temp + "<tr data-dtc=" + String(DTCStorage[i].Number);
+        temp = temp + " data-debugval=" + String(DTCStorage[i].debugVal) + "><td>" + String(buff_timestamp);
         temp = temp + "</td><td>" + String(DTCStorage[i].Number) + "</td><td>";
+        temp = temp + "<img src=static/img/";
+        switch (DTCStorage[i].severity)
+        {
+        case DTC_CRITICAL:
+          temp = temp + "critical";
+          break;
+        case DTC_WARN:
+          temp = temp + "warn";
+          break;
+        case DTC_INFO:
+          temp = temp + "info";
+          break;
+        }
+        temp = temp + ".png></td><td>";
 
         if (DTCStorage[i].active == DTC_ACTIVE)
           temp = temp + "active";
@@ -130,39 +179,41 @@ String processor(const String &var)
     return String(buff);
   }
 
-  if (var == "STATUS_FAC_1")
+  if (var == "ACTIVE_FACTION")
-    return PersistenceData.activeFaction == FACTION_1 ? "ACTIVE" : "INACTIVE";
+    return String(PersistenceData.activeFaction);
 
-  if (var == "STATUS_FAC_2")
+  if (var == "FACTION_1_ACTIVE")
-    return PersistenceData.activeFaction == FACTION_2 ? "ACTIVE" : "INACTIVE";
+    return String(PersistenceData.activeFaction == FACTION_1 ? "bg-primary" : "bg-secondary");
-
+  if (var == "FACTION_2_ACTIVE")
-  if (var == "STATUS_FAC_3")
+    return String(PersistenceData.activeFaction == FACTION_2 ? "bg-primary" : "bg-secondary");
-    return PersistenceData.activeFaction == FACTION_3 ? "ACTIVE" : "INACTIVE";
+  if (var == "FACTION_3_ACTIVE")
+    return String(PersistenceData.activeFaction == FACTION_3 ? "bg-primary" : "bg-secondary");
 
   if (var == "NAME_FAC_1")
-    return FACTION_1_NAME;
+    return String(ConfigData.Faction_1_Name);
 
   if (var == "NAME_FAC_2")
-    return FACTION_2_NAME;
+    return String(ConfigData.Faction_2_Name);
 
   if (var == "NAME_FAC_3")
-    return FACTION_3_NAME;
+    return String(ConfigData.Faction_3_Name);
 
-  if (var == "TITLE")
+  if (var == "BATTERY_SELECT_OPTIONS")
-    return DEVICE_NAME;
+  {
+    String temp;
+    for (uint32_t i = 0; i < BatteryString_Elements; i++)
+    {
+      String selected = ConfigData.batteryType == i ? " selected " : "";
+      temp = temp + "<option value=\"" + i + "\"" + selected + ">" + BatteryString[i] + "</option>";
+    }
+    return temp;
+  }
 
-  if (var == "BATTERY_LEVEL")
+  if (var == "FACTIONREBOOT_CHECKED")
-  {
+    return String(ConfigData.active_faction_on_reboot == true ? "checked" : "");
-    return String(globals.battery_level);
+
-  }
+  if (var == "FACTION_RECOVERY")
-  if (var == "BATTERY_TYPE")
+    return String(ConfigData.active_faction_on_reboot);
-  {
-    return String(BatteryString[ConfigData.batteryType]);
-  }
-  if (var == "BATTERY_VOLTAGE")
-  {
-    return String(globals.loadvoltage);
-  }
 
   return String();
 }
@@ -170,19 +221,84 @@ String processor(const String &var)
 void Webserver_Callback(AsyncWebServerRequest *request)
 {
   request->send(LittleFS, "/index.htm", "text/html", false, processor);
-  StatusResponseMessage_Type = RESPMSG_HIDE;
 }
 
 void WebserverPOST_Callback(AsyncWebServerRequest *request)
 {
+  request->send(LittleFS, "/post.htm", "text/html", false, processor);
+
+  Debug_pushMessage("POST:\n");
   int paramsNr = request->params();
   for (int i = 0; i < paramsNr; i++)
   {
     AsyncWebParameter *p = request->getParam(i);
-    if (p->name() == "commandInput")
+    Debug_pushMessage("%s : %s\n", p->name().c_str(), p->value().c_str());
-      WebserverCommands_Callback(p->value());
+
+    // begin: POST Form Maintenance
+    if (p->name() == "reset_ee_btn")
+    {
+      if (request->hasParam("reset_ee_pds", true))
+      {
+        AsyncWebParameter *param = request->getParam("reset_ee_pds", true);
+        if (param->value() == "on")
+          globals.requestEEAction = globals.requestEEAction == EE_CFG_FORMAT ? EE_FORMAT_ALL : EE_PDS_FORMAT;
+      }
+      if (request->hasParam("reset_ee_cfg", true))
+      {
+        AsyncWebParameter *param = request->getParam("reset_ee_cfg", true);
+        if (param->value() == "on")
+          globals.requestEEAction = globals.requestEEAction == EE_PDS_FORMAT ? EE_FORMAT_ALL : EE_CFG_FORMAT;
+      }
+    }
+    if (p->name() == "reboot")
+    {
+      globals.systemStatus = sysStat_Shutdown;
+    }
+    if (p->name() == "resetpoints")
+    {
+      PersistenceData.faction_1_timer = 0;
+      PersistenceData.faction_2_timer = 0;
+      PersistenceData.faction_3_timer = 0;
+      PersistenceData.activeFaction = NONE;
+      globals.requestEEAction == EE_PDS_SAVE;
+    }
+    // end: POST Form Maintenance
+
+    // begin: POST Form Settings
+    if (p->name() == "battery_select")
+    {
+      batteryType_t temp = (batteryType_t)p->value().toInt();
+      ConfigData.batteryType = temp;
+    }
+
+    if (request->hasParam("factionreboot_cont", true))
+    {
+      AsyncWebParameter *param = request->getParam("factionreboot_cont", true);
+      if (param->value() == "on")
+        ConfigData.active_faction_on_reboot = true;
+    }
+    else
+    {
+      ConfigData.active_faction_on_reboot = false;
+    }
+
+    if (p->name() == "faction_1_name")
+    {
+      strncpy(ConfigData.Faction_1_Name, p->value().c_str(), sizeof(ConfigData.Faction_1_Name));
+    }
+    if (p->name() == "faction_2_name")
+    {
+      strncpy(ConfigData.Faction_2_Name, p->value().c_str(), sizeof(ConfigData.Faction_2_Name));
+    }
+    if (p->name() == "faction_3_name")
+    {
+      strncpy(ConfigData.Faction_3_Name, p->value().c_str(), sizeof(ConfigData.Faction_3_Name));
+    }
+
+    if (p->name() == "settingssave")
+      globals.requestEEAction = EE_CFG_SAVE;
+    // end: POST Form Settings
   }
-  request->send(LittleFS, "/index.htm", "text/html", false, processor);
 }
 
 void WebserverNotFound_Callback(AsyncWebServerRequest *request)
@@ -190,20 +306,231 @@ void WebserverNotFound_Callback(AsyncWebServerRequest *request)
   request->send(404, "text/html", "Not found");
 }
 
-void WebserverCommands_Callback(String input)
+void GetFlashVersion(char *buff, size_t buff_size)
 {
-  String command = input.substring(0, input.indexOf(' '));
+  File this_file = LittleFS.open("version", "r");
-  command.toUpperCase();
+  if (!this_file)
-  StatusResponseMessage_Type = RESPMSG_HIDE;
+  { // failed to open the file, retrn empty result
-
+    buff[0] = '\0';
-  if (command == "RESET")
+    return;
+  }
+  if (this_file.available())
   {
-    strcpy(StatusResponseMessage, "Counter Reset done");
+    int bytes_read;
-    StatusResponseMessage_Type = RESPMSG_SUCCESS;
+    bytes_read = this_file.readBytesUntil('\r', buff, buff_size - 1);
+    buff[bytes_read] = '\0';
+  }
+  this_file.close();
+}
 
-    PersistenceData.faction_1_timer = 0;
+void WebserverFirmwareUpdate_Callback(AsyncWebServerRequest *request, const String &filename, size_t index, uint8_t *data, size_t len, bool final)
-    PersistenceData.faction_2_timer = 0;
+{
-    PersistenceData.faction_3_timer = 0;
+
-    PersistenceData.activeFaction = NONE;
+  if (!index)
+  {
+    Debug_pushMessage("Update");
+    size_t content_len = request->contentLength();
+    int cmd = (filename.indexOf(".fs") > -1) ? U_FS : U_FLASH;
+    Update.runAsync(true);
+    if (!Update.begin(content_len, cmd))
+    {
+      Update.printError(Serial);
+    }
+  }
+
+  if (Update.write(data, len) != len)
+  {
+    Update.printError(Serial);
+  }
+  else
+  {
+    Debug_pushMessage("Progress: %d%%\n", (Update.progress() * 100) / Update.size());
+  }
+
+  if (final)
+  {
+    AsyncWebServerResponse *response = request->beginResponse(302, "text/plain", "Please wait while the device reboots");
+    response->addHeader("Refresh", "20");
+    response->addHeader("Location", "/");
+    request->send(response);
+    if (!Update.end(true))
+    {
+      Update.printError(Serial);
+    }
+    else
+    {
+      Debug_pushMessage("Update complete\n");
+      globals.systemStatus = sysStat_Shutdown;
+    }
   }
 }
+
+void WebserverEERestore_Callback(AsyncWebServerRequest *request, const String &filename, size_t index, uint8_t *data, size_t len, bool final)
+{
+  bool ee_done = false;
+  static bool validext = false;
+  static char *buffer = NULL;
+  static uint32_t read_ptr = 0;
+  DeserializationError error;
+
+  if (!index)
+  {
+    validext = (filename.indexOf(".ee.json") > -1);
+    if (validext)
+    {
+      buffer = (char *)malloc(1536);
+      read_ptr = 0;
+      if (buffer == NULL)
+        Debug_pushMessage("malloc() failed for EEPROM-Restore");
+    }
+  }
+
+  if (buffer != NULL)
+  {
+    memcpy(buffer + read_ptr, data, len);
+    read_ptr = read_ptr + len;
+  }
+
+  if (final)
+  {
+    if (buffer != NULL)
+    {
+      Serial.print(buffer);
+      StaticJsonDocument<1536> doc;
+      error = deserializeJson(doc, buffer);
+      if (error)
+      {
+        Debug_pushMessage("deserializeJson() failed: %s\n", error.f_str());
+      }
+      else
+      {
+
+        ConfigData.batteryType = (batteryType_t)doc["config"]["batteryType"].as<uint32_t>();
+        ConfigData.EEPROM_Version = doc["config"]["EEPROM_Version"].as<uint32_t>();
+        strncpy(ConfigData.Faction_1_Name, doc["config"]["Faction_1_Name"].as<String>().c_str(), sizeof(ConfigData.Faction_1_Name));
+        strncpy(ConfigData.Faction_2_Name, doc["config"]["Faction_2_Name"].as<String>().c_str(), sizeof(ConfigData.Faction_2_Name));
+        strncpy(ConfigData.Faction_3_Name, doc["config"]["Faction_3_Name"].as<String>().c_str(), sizeof(ConfigData.Faction_3_Name));
+
+        PersistenceData.writeCycleCounter = doc["persis"]["writeCycleCounter"].as<uint16_t>();
+        PersistenceData.activeFaction = (factions_t)doc["persis"]["activeFaction"].as<uint32_t>();
+        PersistenceData.faction_1_timer = doc["persis"]["faction_1_timer"].as<uint32_t>();
+        PersistenceData.faction_2_timer = doc["persis"]["faction_2_timer"].as<uint32_t>();
+        PersistenceData.faction_3_timer = doc["persis"]["faction_3_timer"].as<uint32_t>();
+        PersistenceData.checksum = doc["persis"]["checksum"].as<uint32_t>();
+
+        ee_done = true;
+      }
+    }
+
+    free(buffer);
+
+    AsyncWebServerResponse *response = request->beginResponse(302, "text/plain", "Please wait while the device reboots");
+    response->addHeader("Refresh", "20");
+    response->addHeader("Location", "/");
+    request->send(response);
+
+    if (ee_done)
+    {
+      Debug_pushMessage("Update complete");
+      globals.systemStatus = sysStat_Shutdown;
+    }
+    else
+    {
+    }
+  }
+}
+
+void WebServerEEJSON_Callback(AsyncWebServerRequest *request)
+{
+  AsyncResponseStream *response = request->beginResponseStream("application/json");
+  DynamicJsonDocument json(1024);
+  JsonObject fwinfo = json.createNestedObject("info");
+
+  char buffer[16];
+
+  fwinfo["DeviceName"] = globals.DeviceName;
+  sprintf(buffer, "%d.%02d", constants.Required_Flash_Version_major, constants.Required_Flash_Version_minor);
+  fwinfo["FW-Version"] = buffer;
+  fwinfo["FS-Version"] = globals.FlashVersion;
+  snprintf_P(buffer, sizeof(buffer), "%s", constants.GitHash);
+  fwinfo["Git-Hash"] = buffer;
+
+  JsonObject config = json.createNestedObject("config");
+
+  config["EEPROM_Version"] = ConfigData.EEPROM_Version;
+  config["batteryType"] = ConfigData.batteryType;
+  config["Faction_1_Name"] = ConfigData.Faction_1_Name;
+  config["Faction_2_Name"] = ConfigData.Faction_2_Name;
+  config["Faction_3_Name"] = ConfigData.Faction_3_Name;
+  sprintf(buffer, "0x%08X", ConfigData.checksum);
+  config["checksum"] = buffer;
+
+  JsonObject eepart = json.createNestedObject("eepart");
+
+  sprintf(buffer, "0x%04X", globals.eePersistanceAdress);
+  eepart["PersistanceAddress"] = buffer;
+
+  JsonObject persis = json.createNestedObject("persis");
+
+  persis["writeCycleCounter"] = PersistenceData.writeCycleCounter;
+  persis["activeFaction"] = PersistenceData.activeFaction;
+  persis["faction_1_timer"] = PersistenceData.faction_1_timer;
+  persis["faction_2_timer"] = PersistenceData.faction_2_timer;
+  persis["faction_3_timer"] = PersistenceData.faction_3_timer;
+  sprintf(buffer, "0x%08X", PersistenceData.checksum);
+  persis["checksum"] = buffer;
+
+  serializeJsonPretty(json, *response);
+
+  response->addHeader("Content-disposition", "attachment; filename=backup.ee.json");
+
+  request->send(response);
+}
+
+void WebsocketEvent_Callback(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len)
+{
+  switch (type)
+  {
+  case WS_EVT_CONNECT:
+    Debug_pushMessage("WebSocket client #%u connected from %s\n", client->id(), client->remoteIP().toString().c_str());
+    break;
+  case WS_EVT_DISCONNECT:
+    Debug_pushMessage("WebSocket client #%u disconnected\n", client->id());
+    break;
+  case WS_EVT_DATA:
+    Websocket_HandleMessage(arg, data, len);
+    break;
+  case WS_EVT_PONG:
+  case WS_EVT_ERROR:
+    break;
+  }
+}
+
+void Websocket_HandleMessage(void *arg, uint8_t *data, size_t len)
+{
+  AwsFrameInfo *info = (AwsFrameInfo *)arg;
+  if (info->final && info->index == 0 && info->len == len && info->opcode == WS_TEXT)
+  {
+    data[len] = 0;
+
+    Debug_pushMessage("Got WebSocket Message: %s \n", (char *)data);
+
+    if (strcmp((char *)data, "start") == 0)
+    {
+      SetDebugportStatus(dbg_Webui, enabled);
+    }
+    else if (strcmp((char *)data, "stop") == 0)
+    {
+      SetDebugportStatus(dbg_Webui, disabled);
+    }
+    else if (strcmp((char *)data, "foo") == 0)
+    {
+      Debug_pushMessage("Got WebSocket Message 'foo' from client\n");
+    }
+  }
+}
+
+void Websocket_PushLiveDebug(String Message)
+{
+  webSocket.textAll(Message + "\n");
+}

Software/src/webui.h

@@ -1,15 +0,0 @@
-#ifndef _WEBUI_H_
-#define _WEBUI_H_
-
-#include <Arduino.h>
-#include <FS.h>
-#include <LittleFS.h>
-#include <AsyncTCP.h>
-#include <ESPAsyncWebServer.h>
-#include "config.h"
-#include "globals.h"
-#include "dtc.h"
-
-void initWebUI();
-
-#endif

Software/test/README

@@ -1,5 +1,5 @@
 
-This directory is intended for PlatformIO Unit Testing and project tests.
+This directory is intended for PlatformIO Test Runner and project tests.
 
 Unit Testing is a software testing method by which individual units of
 source code, sets of one or more MCU program modules together with associated
@@ -8,4 +8,4 @@ determine whether they are fit for use. Unit testing finds problems early
 in the development cycle.
 
 More information about PlatformIO Unit Testing:
-- https://docs.platformio.org/page/plus/unit-testing.html
+- https://docs.platformio.org/en/latest/advanced/unit-testing/index.html

Software/wifi_credentials.example.ini

@@ -1,5 +1,6 @@
 [wifi_cred]
+wifi_ap_ssid = wifi-ap-ssid
 wifi_ap_password = wifiappass
-wifi_ssid = wifi-ssid
+wifi_client_ssid = wifi-ssid
-wifi_password = wifi-pass
+wifi_client_password = wifi-pass
-admin_password = ota-password
+ota_password = ota-password