implemented Wash-Mode

Hardware/oiler SMD.kicad_pcb

@@ -11738,7 +11738,7 @@
 		(layer "Edge.Cuts")
 		(uuid "da6f4122-0ecc-496f-b0fd-e4abef534976")
 	)
-	(gr_text "KTM CAN ChainLube Mk1\nPCB Rev.: 1.4\n(c) 2025 - Marcel Peterkau"
+	(gr_text "KTM CAN ChainLube Mk1\nPCB Rev.: 1.5\n(c) 2025 - Marcel Peterkau"
 		(at 156.464 85.344 90)
 		(layer "B.SilkS")
 		(uuid "00000000-0000-0000-0000-000061de6936")

Jenkinsfile

@@ -0,0 +1,119 @@
+pipeline {
+    agent any
+
+    environment {
+        BUILD_ENV = "pcb_rev_1-4_serial"
+        PIO_HOME_DIR = "${WORKSPACE}/.pio"
+        VENV_PATH = "${WORKSPACE}/Software/.venv"
+    }
+
+    parameters {
+        choice(
+            name: 'BUILD_ENV',
+            choices: ['pcb_rev_1-2_serial', 'pcb_rev_1-3_serial', 'pcb_rev_1-4_serial'],
+            description: 'Firmware-Umgebung auswählen'
+        )
+    }
+
+    stages {
+
+        stage('🧰 Setup PlatformIO') {
+            steps {
+                dir('Software') {
+                    sh """
+                        [ -d .venv ] || python3 -m venv .venv
+                        ${env.VENV_PATH}/bin/pip install --upgrade pip platformio
+                    """
+                }
+            }
+        }
+
+        stage('📄 Dummy WiFi-Creds') {
+            steps {
+                dir('Software') {
+                    writeFile file: 'wifi_credentials.ini', text: '''
+[wifi_cred]
+wifi_ssid_client = DummySSID
+wifi_password_client = DummyPass
+admin_password = Admin123
+wifi_ap_password = DummyAP
+                    '''.stripIndent()
+                }
+            }
+        }
+
+        stage('🧪 Build Firmware') {
+            steps {
+                dir('Software') {
+                    sh """
+                        ${env.VENV_PATH}/bin/platformio run -e ${params.BUILD_ENV}
+                    """
+                }
+            }
+        }
+
+        stage('📁 Build Filesystem (LittleFS)') {
+            steps {
+                dir('Software') {
+                    sh """
+                        ${env.VENV_PATH}/bin/platformio run -t buildfs -e ${params.BUILD_ENV}
+                    """
+                }
+            }
+        }
+
+        stage('📦 Find & Archive Firmware') {
+            steps {
+                dir('Software') {
+                    script {
+                        echo "🔍 Suche nach Firmware (.fw.bin) und Filesystem (.fs.gz) Artefakten..."
+
+                        def firmwareFiles = findFiles(glob: '.pio/build/**/*.fw.bin')
+                        def fsFiles       = findFiles(glob: '.pio/build/**/*.fs.gz')
+
+                        if (firmwareFiles.length == 0 && fsFiles.length == 0) {
+                        echo "⚠️ Keine passenden Artefakte (.fw.bin / .fs.gz) gefunden – nichts zu archivieren."
+                        } else {
+                        firmwareFiles.each { echo "📦 Firmware: ${it.path}" }
+                        fsFiles.each      { echo "📦 Filesystem: ${it.path}" }
+
+                        def allArtifacts = (firmwareFiles + fsFiles).collect { it.path }
+                        archiveArtifacts artifacts: allArtifacts.join(', ')
+                        }
+                    }
+                }
+            }
+        }
+
+        stage('🔌 Flash Hardware (Dummy)') {
+            steps {
+                echo "TODO: Flash-Script aufrufen, z. B.: python3 Hardware/flash.py /dev/ttyUSB0"
+            }
+        }
+
+        stage('🧠 Run Tests (Dummy)') {
+            steps {
+                dir('Testing') {
+                    echo "TODO: Testing mit z. B.: python3 test_runner.py oder pytest starten"
+                }
+            }
+        }
+
+        stage('🧹 Cleanup Build Output') {
+            steps {
+                dir('Software') {
+                    sh "rm -rf .pio"
+                }
+            }
+        }
+    }
+
+    post {
+        success {
+            echo "✅ CI abgeschlossen – Firmware gebaut, Dummy-Stages bereit"
+        }
+        failure {
+            echo "❌ Fehler im Build – Logs checken, Commander Seraphon"
+        }
+    }
+}

Software/.gitignore

@@ -3,3 +3,6 @@ data/
 .vscode
 wifi_credentials.ini
 __pycache__
+# Node-Tools für Build-Scripts
+/tools_node/
+/data_stripped/

Software/codegen/prepare_littlefs.py

@@ -11,23 +11,35 @@ import platform
 Import("env")
 Import("projenv")
 
-# Überprüfe die Betriebssystemplattform
-if platform.system() == "Windows":
-    # Setze die Pfade zu den Tools für Windows
-    html_minifier_path = os.path.join(os.getenv("APPDATA"), "npm", "html-minifier.cmd")
-    uglifyjs_path = os.path.join(os.getenv("APPDATA"), "npm", "uglifyjs.cmd")
-    terser_path = os.path.join(os.getenv("APPDATA"), "npm", "terser.cmd")
-    cssnano_path = os.path.join(os.getenv("APPDATA"), "npm", "cssnano.cmd")
-elif platform.system() == "Linux":
-    # Setze die Namen der Tools für Linux
-    html_minifier_path = "html-minifier"
-    uglifyjs_path = "uglifyjs"
-    terser_path = "terser"
-    cssnano_path = "cssnano"
-else:
-    # Hier könntest du weitere Bedingungen für andere Betriebssysteme hinzufügen
-    raise Exception("Unterstütztes Betriebssystem nicht erkannt")
+def ensure_node_tool(package_name, binary_name=None):
+    """Installiert das Tool lokal, wenn es fehlt – mit npm init bei Bedarf"""
+    if binary_name is None:
+        binary_name = package_name
 
+    project_dir = env.subst('$PROJECT_DIR')
+    tools_dir = os.path.join(project_dir, 'tools_node')
+    local_bin = os.path.join(tools_dir, 'node_modules', '.bin', binary_name)
+
+    os.makedirs(tools_dir, exist_ok=True)
+
+    # Initialisiere npm, falls noch nicht geschehen
+    if not os.path.isfile(os.path.join(tools_dir, 'package.json')):
+        print("🛠️  Initializing local npm project in tools_node...")
+        subprocess.run(['npm', 'init', '-y'], cwd=tools_dir, check=True)
+
+    # Installiere Tool (idempotent)
+    try:
+        subprocess.run(['npm', 'install', package_name], cwd=tools_dir, check=True)
+    except Exception as e:
+        print(f"❌ Fehler beim Installieren von {package_name}: {e}")
+
+    return local_bin if os.path.isfile(local_bin) else binary_name
+
+# Tools sicherstellen
+# Tools sicherstellen – Package-Name und CLI-Binary ggf. unterschiedlich
+html_minifier_path = ensure_node_tool("html-minifier")
+terser_path         = ensure_node_tool("terser")
+cssnano_path        = ensure_node_tool("cssnano-cli", "cssnano")
 
 def minify_html(input_path, output_path):
     subprocess.run([html_minifier_path, '--collapse-whitespace', '--remove-comments', input_path, '-o', output_path])
@@ -40,13 +52,7 @@ def minify_css(input_path, output_path):
 
 def process_file(src_path, dest_path):
     _, file_extension = os.path.splitext(src_path)
-
-    # Extrahiere den Ordnerpfad im Zielverzeichnis
-    dest_dir = os.path.dirname(dest_path)
-
-    # Erstelle den Ordner und alle dazugehörigen Unterordner, falls sie nicht existieren
-    os.makedirs(dest_dir, exist_ok=True)
-
+    os.makedirs(os.path.dirname(dest_path), exist_ok=True)
     if file_extension.lower() == '.js':
         minify_js(src_path, dest_path)
     elif file_extension.lower() == '.css':
@@ -54,128 +60,89 @@ def process_file(src_path, dest_path):
     elif file_extension.lower() in ['.html', '.htm']:
         minify_html(src_path, dest_path)
     else:
-        # Kopiere nicht bearbeitbare Dateien direkt in den Zielordner
         shutil.copy2(src_path, dest_path)
 
 def strip_files(src_dir, dest_dir):
-    # Erstelle den Zielordner und alle dazugehörigen Unterordner, falls sie nicht existieren
     os.makedirs(dest_dir, exist_ok=True)
-
-    # Durchlaufe alle Dateien und Unterverzeichnisse im Quellordner
     for root, _, files in os.walk(src_dir):
         for filename in files:
             src_path = os.path.join(root, filename)
-            dest_path = os.path.relpath(src_path, src_dir)
-            dest_path = os.path.join(dest_dir, dest_path)
-
-            # Verarbeite nur Dateien (keine Unterverzeichnisse)
+            rel_path = os.path.relpath(src_path, src_dir)
+            dest_path = os.path.join(dest_dir, rel_path)
             process_file(src_path, dest_path)
 
-
 def gzip_file(src_path, dst_path):
-
     with open(src_path, 'rb') as src, gzip.open(dst_path, 'wb') as dst:
         for chunk in iter(lambda: src.read(4096), b""):
             dst.write(chunk)
 
-
 def getListOfFiles(dirName):
-    # create a list of file and sub directories
-    # names in the given directory
-    listOfFile = os.listdir(dirName)
-    allFiles = list()
-    # Iterate over all the entries
-    for entry in listOfFile:
-        # Create full path
+    entries = os.listdir(dirName)
+    allFiles = []
+    for entry in entries:
         fullPath = os.path.join(dirName, entry)
-        # If entry is a directory then get the list of files in this directory
         if os.path.isdir(fullPath):
-            allFiles = allFiles + getListOfFiles(fullPath)
+            allFiles += getListOfFiles(fullPath)
         else:
             allFiles.append(fullPath)
-
     return allFiles
 
-def remove_prefix(text, prefix):
-    if text.startswith(prefix):
-        return text[len(prefix):]
-    return text  # or whatever
-
-# Compress files from 'data_src/' to 'data/'
-
+def safe_relpath(path, start):
+    return os.path.relpath(path, start).replace("\\", "/")
 
 def gzip_webfiles(source, target, env):
-    # Filetypes to compress
     filetypes_to_gzip = ['.css', '.png', '.js', '.ico', '.woff2', '.json']
     print('\nGZIP: Starting gzip-Process for LittleFS-Image...\n')
-    data_src_dir_path = os.path.join(env.get('PROJECT_DIR'), 'data_src')
-    data_temp_dir_path = os.path.join(env.get('PROJECT_DIR'), 'data_stripped')
-    strip_files(data_src_dir_path, data_temp_dir_path)
-    data_dir_path = env.get('PROJECT_DATA_DIR')
-    # check if data and datasrc exist. If the first exists and not the second, it renames it
-    if(os.path.exists(data_dir_path) and not os.path.exists(data_temp_dir_path)):
-        print('GZIP: Directory "'+data_dir_path +
-              '" exists, "'+data_temp_dir_path+'" is not found.')
-        print('GZIP: Renaming "' + data_dir_path +
-              '" to "' + data_temp_dir_path + '"')
-        os.rename(data_dir_path, data_temp_dir_path)
-    # Delete the 'data' directory
-    if(os.path.exists(data_dir_path)):
-        print('GZIP: Deleting the "data" directory ' + data_dir_path)
-        shutil.rmtree(data_dir_path)
-    # Recreate empty 'data' directory
-    print('GZIP: Re-creating an empty data directory ' + data_dir_path)
-    os.mkdir(data_dir_path)
-    # Determine the files to compress
+    src_dir = os.path.join(env.get('PROJECT_DIR'), 'data_src')
+    temp_dir = os.path.join(env.get('PROJECT_DIR'), 'data_stripped')
+    dst_dir = env.get('PROJECT_DATA_DIR')
+
+    strip_files(src_dir, temp_dir)
+
+    if os.path.exists(dst_dir):
+        shutil.rmtree(dst_dir)
+    os.mkdir(dst_dir)
 
     files_to_copy = []
     files_to_gzip = []
 
-    all_data_src = getListOfFiles(data_temp_dir_path)
-    for file in all_data_src:
-        file_name, file_extension = os.path.splitext(file)
-        print(file_name + " has filetype " + file_extension)
-        if file_extension in filetypes_to_gzip:
+    for file in getListOfFiles(temp_dir):
+        _, ext = os.path.splitext(file)
+        if ext in filetypes_to_gzip:
             files_to_gzip.append(file)
         else:
-            filename_subdir = remove_prefix(file, data_temp_dir_path)
-            files_to_copy.append(filename_subdir)
+            files_to_copy.append(safe_relpath(file, temp_dir))
 
     for file in files_to_copy:
-        print('GZIP: Copying file from: ' + data_temp_dir_path + file + ' to: ' + data_dir_path + file)
-        os.makedirs(os.path.dirname(data_dir_path + file), exist_ok=True)
-        shutil.copy(data_temp_dir_path + file, data_dir_path + file)
-    # Compress and move files
+        full_dst = os.path.join(dst_dir, file)
+        os.makedirs(os.path.dirname(full_dst), exist_ok=True)
+        shutil.copy(os.path.join(temp_dir, file), full_dst)
 
     was_error = False
     try:
-        for source_file_path in files_to_gzip:
-            print('GZIP: compressing... ' + source_file_path)
-            filename_subdir = remove_prefix(source_file_path, data_temp_dir_path)
-            target_file_path = data_dir_path + filename_subdir
-            os.makedirs(os.path.dirname(target_file_path), exist_ok=True)
-            print('GZIP: Compressed... ' + target_file_path)
-            gzip_file(source_file_path, target_file_path + ".gz")
+        for src in files_to_gzip:
+            rel_path = safe_relpath(src, temp_dir)
+            dst_path = os.path.join(dst_dir, rel_path + '.gz')
+            os.makedirs(os.path.dirname(dst_path), exist_ok=True)
+            print('GZIP: compressing... ' + rel_path)
+            gzip_file(src, dst_path)
     except IOError as e:
         was_error = True
-        print('GZIP: Failed to compress file: ' + source_file_path)
-        # print( 'GZIP: EXCEPTION... {}'.format( e ) )
-    if was_error:
-        print('GZIP: Failure/Incomplete.\n')
-    else:
-        print('GZIP: Compressed correctly.\n')
-        shutil.rmtree(data_temp_dir_path)
+        print('GZIP: Fehler beim Komprimieren:', e)
 
-    return
+    if was_error:
+        print('⚠️  GZIP: Nicht alle Dateien konnten verarbeitet werden.\n')
+    else:
+        print('✅ GZIP: Komprimierung abgeschlossen.\n')
+        shutil.rmtree(temp_dir)
 
 def gzip_binffiles(source, target, env):
     littlefsbin = target[0].get_abspath()
-    targetbin = os.path.join(os.path.dirname(littlefsbin), 'filesystem.fs')
-    shutil.copyfile(littlefsbin, targetbin)
-    gzip_file(targetbin, os.path.join(str(targetbin) + '.gz'))
-    os.remove(targetbin)
-    return
+    tmpbin = os.path.join(os.path.dirname(littlefsbin), 'filesystem.fs')
+    shutil.copyfile(littlefsbin, tmpbin)
+    gzip_file(tmpbin, tmpbin + '.gz')
+    os.remove(tmpbin)
 
-# IMPORTANT, this needs to be added to call the routine
+# Hooks setzen
 env.AddPreAction('$BUILD_DIR/littlefs.bin', gzip_webfiles)
 env.AddPostAction('$BUILD_DIR/littlefs.bin', gzip_binffiles)

Software/data_src/index.htm

@@ -349,6 +349,33 @@
               </div>
             </div>
           </div>
+
+          <div class="form-group row">
+            <label for="washdistance" class="control-label col-4">Waschmodus Distanz</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="washdistance" type="text"
+                  class="set-wsevent data-washdistance form-control" required="required">
+                <div class="input-group-append">
+                  <span class="input-group-text">m</span>
+                </div>
+              </div>
+            </div>
+          </div>
+
+          <div class="form-group row">
+            <label for="washinterval" class="control-label col-4">Waschmodus Interval</label>
+            <div class="col-8">
+              <div class="input-group">
+                <input id="washinterval" type="text"
+                  class="set-wsevent data-washinterval form-control" required="required">
+                <div class="input-group-append">
+                  <span class="input-group-text">m</span>
+                </div>
+              </div>
+            </div>
+          </div>
+
         </p>
         <!-- Div Group Lube Settings-->
         <!-- Div Group Oiltank Settings -->

Software/include/button_actions.h

@@ -0,0 +1,18 @@
+// === button_actions.h ===
+#ifndef _BUTTON_ACTIONS_H_
+#define _BUTTON_ACTIONS_H_
+
+#include <Arduino.h>
+#include "buttoncontrol.h"
+
+// Deklarationen der Button-Callbacks
+void ButtonAction_ToggleMode();
+void ButtonAction_StartPurge();
+void ButtonAction_ToggleWiFi();
+void ButtonAction_WashMode();
+
+// Bereitstellung der Aktionsliste
+extern const ButtonActionEntry buttonActions[];
+extern const uint8_t buttonActionCount;
+
+#endif

Software/include/buttoncontrol.h

@@ -0,0 +1,30 @@
+// === buttoncontrol.h ===
+#ifndef _BUTTONCONTROL_H_
+#define _BUTTONCONTROL_H_
+
+#include <Arduino.h>
+
+// Aktionen, die vom Button ausgelöst werden können
+enum ButtonAction
+{
+    BTN_NONE,
+    BTN_CUSTOM
+};
+
+// Callback-Funktionstyp
+typedef void (*ButtonCallback)();
+
+struct ButtonActionEntry
+{
+    uint32_t holdTimeMs;
+    uint32_t ledColor;
+    ButtonCallback callback;
+};
+
+// Initialisierung des Buttonmoduls
+void ButtonControl_Init(uint8_t pin, const ButtonActionEntry *actions, uint8_t actionCount);
+
+// Muss regelmäßig in loop() aufgerufen werden
+void ButtonControl_Update();
+
+#endif

Software/include/common.h

@@ -41,9 +41,10 @@
 #elif PCB_REV == 4
     #define GPIO_BUTTON D4
     #define GPIO_LED D3
-    #define GPIO_TRIGGER D6
+    #define GPIO_TRIGGER D8
     #define GPIO_PUMP D0
     #define GPIO_CS_CAN D8
+    #define GPIO_CE_KLINE D8
 #endif
 
 #ifndef HOST_NAME
@@ -72,6 +73,7 @@ typedef enum eSystem_Status
   sysStat_Startup,
   sysStat_Normal,
   sysStat_Rain,
+  sysStat_Wash,
   sysStat_Purge,
   sysStat_Error,
   sysStat_Shutdown

Software/include/config.h

@@ -21,7 +21,7 @@
 #include "dtc.h"
 #include "common.h"
 
-#define EEPROM_STRUCTURE_REVISION 3 // Increment this version when changing EEPROM structures
+#define EEPROM_STRUCTURE_REVISION 4 // Increment this version when changing EEPROM structures
 
 #if PCB_REV == 1 || PCB_REV == 2 || PCB_REV == 3
 #define EEPROM_SIZE_BYTES I2C_DEVICESIZE_24LC64
@@ -69,6 +69,8 @@ typedef struct
   uint32_t RimDiameter_Inch;
   uint32_t DistancePerRevolution_mm;
   uint16_t BleedingPulses;
+  uint16_t WashMode_Distance;
+  uint16_t WashMode_Interval;
   SpeedSource_t SpeedSource;
   GPSBaudRate_t GPSBaudRate;
   CANSource_t CANSource;
@@ -85,7 +87,7 @@ typedef struct
 
 // Default configuration settings
 const LubeConfig_t LubeConfig_defaults = {
-    0, 8000, 4000, 320, DEFAULT_PUMP_DOSE, 30, 1, 150, 70, 18, 2000, 25, SOURCE_IMPULSE,
+    0, 8000, 4000, 320, DEFAULT_PUMP_DOSE, 30, 1, 150, 70, 18, 2000, 25, 500, 10, SOURCE_IMPULSE,
     BAUD_115200,
     KTM_890_ADV_R_2021,
     false,

Software/include/debugger.h

@@ -16,19 +16,6 @@
 
 #include <Arduino.h>
 #include "webui.h"
-const char PROGMEM helpCmd[] = "sysinfo     - System Info\n"
-                               "netinfo     - WiFi Info\n"
-                               "formatPDS   - Format Persistence EEPROM Data\n"
-                               "formatCFG   - Format Configuration EEPROM Data\n"
-                               "checkEE     - Check EEPROM with checksum\n"
-                               "dumpEE1k    - dump the first 1kb of EEPROM to Serial\n"
-                               "dumpEE      - dump the whole EPPROM to Serial\n"
-                               "resetPageEE - Reset the PersistenceData Page\n"
-                               "dumpCFG     - print Config struct\n"
-                               "dumpPDS     - print PersistanceStruct\n"
-                               "saveEE      - save EE-Data\n"
-                               "showdtc     - Show all DTCs\n"
-                               "dumpGlobals - print globals\n";
 
 typedef enum DebugStatus_e
 {
@@ -49,6 +36,13 @@ const char sDebugPorts[dbg_cntElements][7] = {
 
 extern DebugStatus_t DebuggerStatus[dbg_cntElements];
 
+enum LogLevel
+{
+    LOG_INFO,
+    LOG_WARN,
+    LOG_ERROR
+};
+
 void initDebugger();
 void pushCANDebug(uint32_t id, uint8_t dlc, uint8_t *data);
 void Debug_pushMessage(const char *format, ...);

Software/include/led_colors.h

@@ -37,9 +37,10 @@
 #define LED_STARTUP_TANKWARN    COLOR_AMBER
 #define LED_NORMAL_COLOR        COLOR_GREEN
 #define LED_RAIN_COLOR          COLOR_BLUE
-#define LED_WIFI_BLINK          COLOR_YELLOW
+#define LED_WASH_COLOR          COLOR_JADE
+#define LED_WIFI_COLOR          COLOR_YELLOW
 #define LED_PURGE_COLOR         COLOR_MAGENTA
-#define LED_ERROR_BLINK         COLOR_RED
-#define LED_SHUTDOWN_BLINK      COLOR_CYAN
+#define LED_ERROR_COLOR         COLOR_RED
+#define LED_SHUTDOWN_COLOR      COLOR_CYAN
 
 #endif /* _LED_COLORS_H_ */

Software/include/ledcontrol.h

@@ -0,0 +1,35 @@
+// === ledcontrol.h ===
+#ifndef _LEDCONTROL_H_
+#define _LEDCONTROL_H_
+
+#include <Arduino.h>
+#include "led_colors.h"
+
+// LED-Muster
+enum LedPattern
+{
+    LED_PATTERN_ON,
+    LED_PATTERN_FLASH,
+    LED_PATTERN_FLASH_FAST,
+    LED_PATTERN_BLINK,
+    LED_PATTERN_BLINK_FAST,
+    LED_PATTERN_BREATH,
+    LED_PATTERN_BREATH_REVERSE
+};
+
+// Initialisiert die LED-Steuerung
+void LEDControl_Init(uint8_t pin);
+
+// Setzt den Basiszustand (Farbe + Pattern), wird verwendet wenn kein Override aktiv ist
+void LEDControl_SetBasic(uint32_t color, LedPattern pattern);
+
+// Setzt ein Override mit Timeout (0 = bis explizit gecleart)
+void LEDControl_SetOverride(uint32_t color, LedPattern pattern, uint32_t durationMs);
+
+// Hebt das Override wieder auf
+void LEDControl_ClearOverride();
+
+// Muss regelmäßig aus loop() aufgerufen werden
+void LEDControl_Update();
+
+#endif

Software/include/struct2json.h

@@ -3,10 +3,10 @@
  *
  * @brief Header file for converting structs to JSON objects.
  *
- * @note This file is auto-generated by a script on 2024-01-30 20:29:34.
+ * @note This file is auto-generated by a script on 2025-06-15 11:37:51.
  *
  * @author Marcel Peterkau
- * @date   30.01.2024
+ * @date   15.06.2025
  */
 
 #ifndef _STRUCT2JSON_H_
@@ -23,4 +23,4 @@ void generateJsonObject_PersistenceData(JsonObject data);
 
 #endif /* _STRUCT2JSON_H_ */
 
-// CODEGENERATOR_CHECKSUM: 59f35aadffd0bbef253210ea2fbaaf9a515553a2e3cc9bf4cfa2819b63c969ce
+// CODEGENERATOR_CHECKSUM: 4702cb49ea55617cbb34715164810bb58d3c3f46fb1653b6f47bd4fd9cb0031e

Software/platformio.ini

@@ -11,7 +11,7 @@
 [platformio]
 extra_configs =
   wifi_credentials.ini
-default_envs = pcb_rev_1-3_serial, pcb_rev_1-3_ota, pcb_rev_1-2_serial, pcb_rev_1-2_ota
+default_envs = pcb_rev_1-4_serial
 
 [env]
 platform = espressif8266
@@ -42,15 +42,36 @@ monitor_speed = 115200
 
 lib_ldf_mode = deep
 lib_deps = 
-    olikraus/U8g2 @ ^2.35.9
-    adafruit/Adafruit NeoPixel @ ^1.12.0
+    olikraus/U8g2 @ ^2.36.5
+    adafruit/Adafruit NeoPixel @ ^1.15.1
     sstaub/Ticker @ ^4.4.0
-    robtillaart/I2C_EEPROM @ ^1.8.2
-    esphome/ESPAsyncWebServer-esphome @ 3.1.0
-    bblanchon/ArduinoJson @ ^7.0.1
-    coryjfowler/mcp_can @ ^1.5.0
-    mikalhart/TinyGPSPlus @ ^1.0.3
+    robtillaart/I2C_EEPROM @ ^1.9.2
+    esphome/ESPAsyncWebServer-esphome @ 3.3.0
+    bblanchon/ArduinoJson @ ^7.4.1
+    coryjfowler/mcp_can @ ^1.5.1
+    mikalhart/TinyGPSPlus @ ^1.1.0
 
+[env:pcb_rev_1-4_serial]
+extends = env
+custom_pcb_revision = 4
+upload_protocol = esptool
+build_flags =
+  ${env.build_flags}
+  -DPCB_REV=${this.custom_pcb_revision}
+board_build.ldscript = eagle.flash.4m1m.ld
+
+[env:pcb_rev_1-4_ota]
+extends = env
+custom_pcb_revision = 4
+upload_protocol = espota
+upload_port = 10.0.1.14
+upload_flags =
+  --port=8266
+  --auth=${wifi_cred.admin_password}
+build_flags =
+  ${env.build_flags}
+  -DPCB_REV=${this.custom_pcb_revision}
+board_build.ldscript = eagle.flash.4m1m.ld
 
 [env:pcb_rev_1-3_serial]
 extends = env

Software/src/button_actions.cpp

@@ -0,0 +1,47 @@
+// === button_actions.cpp ===
+#include "button_actions.h"
+#include "globals.h"
+#include "debugger.h"
+#include "led_colors.h"
+
+void ButtonAction_ToggleMode()
+{
+    if (globals.systemStatus == sysStat_Normal)
+    {
+        globals.systemStatus = sysStat_Rain;
+    }
+    else if (globals.systemStatus == sysStat_Rain)
+    {
+        globals.systemStatus = sysStat_Normal;
+    }
+    Debug_pushMessage("Toggling Mode\n");
+}
+
+void ButtonAction_StartPurge()
+{
+    globals.systemStatus = sysStat_Purge;
+    Debug_pushMessage("Starting Purge\n");
+}
+
+void ButtonAction_ToggleWiFi()
+{
+    extern void toggleWiFiAP(bool shutdown = false);
+    toggleWiFiAP();
+
+    Debug_pushMessage("Toggling WiFi\n");
+}
+
+void ButtonAction_WashMode()
+{
+    globals.systemStatus = sysStat_Wash;
+    Debug_pushMessage("Setting WashMode\n");
+}
+
+// Liste der Aktionen, sortiert nach Mindest-Haltezeit (ms)
+const ButtonActionEntry buttonActions[] = {
+    {500, LED_RAIN_COLOR, ButtonAction_ToggleMode},
+    {3500, LED_PURGE_COLOR, ButtonAction_StartPurge},
+    {6500, LED_WIFI_COLOR, ButtonAction_ToggleWiFi},
+    {9500, LED_WASH_COLOR, ButtonAction_WashMode}};
+
+const uint8_t buttonActionCount = sizeof(buttonActions) / sizeof(ButtonActionEntry);

Software/src/buttoncontrol.cpp

@@ -0,0 +1,64 @@
+
+// === buttoncontrol.cpp ===
+#include "buttoncontrol.h"
+#include "ledcontrol.h"
+
+static uint8_t btnPin;
+static uint32_t pressStart = 0;
+static bool pressed = false;
+static const ButtonActionEntry *btnActions = nullptr;
+static uint8_t btnActionCount = 0;
+static uint8_t currentActionIndex = 0xFF;
+static uint32_t lastColor = 0;
+
+void ButtonControl_Init(uint8_t pin, const ButtonActionEntry *actions, uint8_t actionCount)
+{
+    btnPin = pin;
+    pinMode(btnPin, INPUT_PULLUP);
+    btnActions = actions;
+    btnActionCount = actionCount;
+}
+
+void ButtonControl_Update()
+{
+    bool currentState = digitalRead(btnPin) == LOW;
+    uint32_t now = millis();
+
+    if (currentState && !pressed)
+    {
+        pressStart = now;
+        pressed = true;
+        currentActionIndex = 0xFF;
+        lastColor = 0;
+    }
+    else if (currentState && pressed)
+    {
+        uint32_t duration = now - pressStart;
+        // Finde passende Aktion basierend auf Zeit
+        for (uint8_t i = 0; i < btnActionCount; i++)
+        {
+            if (duration >= btnActions[i].holdTimeMs)
+            {
+                if (currentActionIndex != i)
+                {
+                    currentActionIndex = i;
+                    lastColor = btnActions[i].ledColor;
+                    // Farbe + Pattern setzen
+                    LEDControl_SetOverride(lastColor, LED_PATTERN_BREATH, 0); // Kein Timeout, wird bei Release beendet
+                }
+            }
+        }
+    }
+    else if (!currentState && pressed)
+    {
+        pressed = false;
+        if (currentActionIndex != 0xFF && currentActionIndex < btnActionCount)
+        {
+            if (btnActions[currentActionIndex].callback)
+            {
+                btnActions[currentActionIndex].callback();
+            }
+        }
+        LEDControl_ClearOverride(); // Override-Modus zurücksetzen
+    }
+}

Software/src/debugger.cpp

@@ -11,7 +11,10 @@
  * @date 09.04.2024
  */
 
-#include "debugger.h"
+ #include "debugger.h"
+ #include <map>
+ #include <functional>
+ #include <vector>
 
 DebugStatus_t DebuggerStatus[dbg_cntElements];
 
@@ -27,6 +30,7 @@ void Debug_ShowDTCs();
 void Debug_dumpGlobals();
 void Debug_printHelp();
 void Debug_Purge();
+void Debug_refillTank();
 const char *uint32_to_binary_string(uint32_t num);
 
 /**
@@ -94,10 +98,9 @@ void Debug_Process()
         }
 
         // Check for input buffer overflow
-        if (inputCnt > sizeof(inputBuffer))
-        {
+        if (inputCnt >= sizeof(inputBuffer) - 1) {
+            inputBuffer[sizeof(inputBuffer) - 1] = '\0';
             inputCnt = 0;
-            inputBuffer[sizeof(inputBuffer) - 1] = 0; // terminate the String
             InputProcessed = CMD_OVERFLOW;
         }        
     }
@@ -147,6 +150,29 @@ void SetDebugportStatus(DebugPorts_t port, DebugStatus_t status)
         Debug_pushMessage("Enabled DebugPort %s\n", sDebugPorts[port]);
 }
 
+
+
+void Debug_log(LogLevel level, const char *format, ...)
+{
+    if ((DebuggerStatus[dbg_Serial] == enabled) || (DebuggerStatus[dbg_Webui] == enabled))
+    {
+        char buff[128];
+        va_list arg;
+        va_start(arg, format);
+        vsnprintf(buff, sizeof(buff), format, arg);
+        va_end(arg);
+
+        if (DebuggerStatus[dbg_Serial] == enabled)
+        {
+            Serial.print(buff);
+        }
+        if (DebuggerStatus[dbg_Webui] == enabled)
+        {
+            Websocket_PushLiveDebug(String(buff));
+        }
+    }
+}
+
 /**
  * @brief Pushes a formatted debug message to the enabled debug ports (Serial or WebUI).
  *
@@ -218,68 +244,100 @@ void pushCANDebug(uint32_t id, uint8_t dlc, uint8_t *data)
     }
 }
 
-/**
- * @brief Processes a debug command and performs corresponding actions.
- *
- * @param command The debug command to be processed.
- */
-void processCmdDebug(String command)
+// === splitArgs Helper ===
+std::vector<String> splitArgs(const String &input)
 {
-    // Check the received command and execute corresponding actions
-    if (command == "help")
-        Debug_printHelp();
-    else if (command == "sysinfo")
-        Debug_printSystemInfo();
-    else if (command == "netinfo")
-        Debug_printWifiInfo();
-    else if (command == "formatCFG")
-        Debug_formatCFG();
-    else if (command == "formatPDS")
-        Debug_formatPersistence();
-    else if (command == "checkEE")
-        Debug_CheckEEPOM(false);
-    else if (command == "checkEEfix")
-        Debug_CheckEEPOM(true);
-    else if (command == "dumpEE1k")
-        dumpEEPROM(0, 1024);
-    else if (command == "dumpEE")
-        dumpEEPROM(0, EEPROM_SIZE_BYTES);
-    else if (command == "resetPageEE")
-        MovePersistencePage_EEPROM(true);
-    else if (command == "dumpCFG")
-        Debug_dumpConfig();
-    else if (command == "dumpPDS")
-        Debug_dumpPersistance();
-    else if (command == "saveEE")
-        globals.requestEEAction = EE_ALL_SAVE;
-    else if (command == "dumpGlobals")
-        Debug_dumpGlobals();
-    else if (command == "sdbg")
-        SetDebugportStatus(dbg_Serial, enabled);
-    else if (command == "dtc_show")
-        Debug_ShowDTCs();
-    else if (command == "dtc_clear")
-        ClearAllDTC();
-    else if (command == "dtc_crit")
-        MaintainDTC(DTC_FAKE_DTC_CRIT, true, millis());
-    else if (command == "dtc_warn")
-        MaintainDTC(DTC_FAKE_DTC_WARN, true, millis());
-    else if (command == "dtc_info")
-        MaintainDTC(DTC_FAKE_DTC_INFO, true, millis());
-    else if (command == "notify_error")
-        Websocket_PushNotification("Debug Error Notification", error);
-    else if (command == "notify_warning")
-        Websocket_PushNotification("Debug Warning Notification", warning);
-    else if (command == "notify_success")
-        Websocket_PushNotification("Debug Success Notification", success);
-    else if (command == "notify_info")
-        Websocket_PushNotification("Debug Info Notification", info);
-    else if (command == "purge")
-        Debug_Purge();
-    else if (command == "toggle_wifi")
-        globals.toggle_wifi = true;
+    std::vector<String> tokens;
+    int start = 0, end = 0;
+    while ((end = input.indexOf(' ', start)) != -1)
+    {
+        tokens.push_back(input.substring(start, end));
+        start = end + 1;
+    }
+    if (start < input.length())
+        tokens.push_back(input.substring(start));
+    return tokens;
+}
+
+// === getArg helper ===
+String getArg(const std::vector<String> &args, size_t index, const String &defaultVal = "")
+{
+    if (index < args.size())
+        return args[index];
+    return defaultVal;
+}
+
+// === Command Handler Map ===
+typedef std::function<void(const String &args)> DebugCmdHandler;
+
+static const std::map<String, DebugCmdHandler> &getCmdMap()
+{
+    static const std::map<String, DebugCmdHandler> cmdMap = {
+        {"help", [](const String &) {
+             Debug_log(LOG_INFO, "Available commands:\n");
+             for (const auto &entry : getCmdMap())
+                 Debug_log(LOG_INFO, " - %s\n", entry.first.c_str());
+         }},
+        {"sysinfo", [](const String &) { Debug_printSystemInfo(); }},
+        {"netinfo", [](const String &) { Debug_printWifiInfo(); }},
+        {"formatCFG", [](const String &) { Debug_formatCFG(); }},
+        {"formatPDS", [](const String &) { Debug_formatPersistence(); }},
+        {"checkEE", [](const String &) { Debug_CheckEEPOM(false); }},
+        {"checkEEfix", [](const String &) { Debug_CheckEEPOM(true); }},
+        {"dumpEE1k", [](const String &) { dumpEEPROM(0, 1024); }},
+        {"dumpEE", [](const String &args) {
+             int start = 0, len = EEPROM_SIZE_BYTES;
+             auto tokens = splitArgs(args);
+             if (tokens.size() >= 2)
+             {
+                 start = tokens[0].toInt();
+                 len = tokens[1].toInt();
+             }
+             dumpEEPROM(start, len);
+         }},
+        {"resetPageEE", [](const String &) { MovePersistencePage_EEPROM(true); }},
+        {"dumpCFG", [](const String &) { Debug_dumpConfig(); }},
+        {"dumpPDS", [](const String &) { Debug_dumpPersistance(); }},
+        {"saveEE", [](const String &) { globals.requestEEAction = EE_ALL_SAVE; }},
+        {"dumpGlobals", [](const String &) { Debug_dumpGlobals(); }},
+        {"sdbg", [](const String &) { SetDebugportStatus(dbg_Serial, enabled); }},
+        {"dtc_show", [](const String &) { Debug_ShowDTCs(); }},
+        {"dtc_clear", [](const String &) { ClearAllDTC(); }},
+        {"dtc_crit", [](const String &) { MaintainDTC(DTC_FAKE_DTC_CRIT, true, millis()); }},
+        {"dtc_warn", [](const String &) { MaintainDTC(DTC_FAKE_DTC_WARN, true, millis()); }},
+        {"dtc_info", [](const String &) { MaintainDTC(DTC_FAKE_DTC_INFO, true, millis()); }},
+        {"notify_error", [](const String &) { Websocket_PushNotification("Debug Error Notification", error); }},
+        {"notify_warning", [](const String &) { Websocket_PushNotification("Debug Warning Notification", warning); }},
+        {"notify_success", [](const String &) { Websocket_PushNotification("Debug Success Notification", success); }},
+        {"notify_info", [](const String &) { Websocket_PushNotification("Debug Info Notification", info); }},
+        {"purge", [](const String &) { Debug_Purge(); }},
+        {"toggle_wifi", [](const String &) { globals.toggle_wifi = true; }},
+        {"dtc_add", [](const String &args) {
+             auto tokens = splitArgs(args);
+             if (!tokens.empty())
+             {
+                 int code = tokens[0].toInt();
+                 MaintainDTC((DTCNum_t)code, true, millis());
+             }
+         }},
+         {"tank_refill", [](const String &) { Debug_refillTank(); }},
+    };
+    return cmdMap;
+}
+
+void processCmdDebug(String input)
+{
+    input.trim();
+    int splitIndex = input.indexOf(' ');
+    String command = splitIndex == -1 ? input : input.substring(0, splitIndex);
+    String args = splitIndex == -1 ? "" : input.substring(splitIndex + 1);
+
+    auto &cmdMap = getCmdMap();
+    auto it = cmdMap.find(command);
+    if (it != cmdMap.end())
+        it->second(args);
     else
-        Debug_pushMessage("unknown Command\n");
+        Debug_log(LOG_WARN, "Unknown command: '%s'\n", command.c_str());
 }
 
 /**
@@ -473,25 +531,6 @@ void Debug_ShowDTCs()
     }
 }
 
-/**
- * @brief Displays the help commands for debugging through Serial or WebUI.
- *        Each command is printed individually in a formatted manner.
- */
-void Debug_printHelp()
-{
-    char buff[64];
-
-    // Iterate through helpCmd and display each command
-    for (unsigned int i = 0; i < sizeof(helpCmd) / 63; i++)
-    {
-        // Copy a portion of helpCmd to buff for display
-        memcpy_P(buff, (helpCmd + (i * 63)), 63);
-        buff[63] = 0;
-
-        // Display the help command
-        Debug_pushMessage(buff);
-    }
-}
 
 /**
  * @brief Start purging for 10 pulses.
@@ -505,6 +544,13 @@ void Debug_Purge()
     Debug_pushMessage("Purging 10 pulses\n");
 }
 
+void Debug_refillTank()
+{
+    PersistenceData.tankRemain_microL = LubeConfig.tankCapacity_ml * 1000;
+    globals.requestEEAction = EE_PDS_SAVE;
+    Debug_pushMessage("Setting Tank to 100%\n");
+}
+
 /**
  * @brief Convert a uint32_t value to a binary string with nibbles separated by a space.
  *

Software/src/ledcontrol.cpp

@@ -0,0 +1,131 @@
+
+// === ledcontrol.cpp ===
+#include "ledcontrol.h"
+#include <Adafruit_NeoPixel.h>
+#include "globals.h"
+
+static Adafruit_NeoPixel leds(1, GPIO_LED, NEO_RGB + NEO_KHZ800);
+
+static uint32_t basicColor = 0x000000;
+static LedPattern basicPattern = LED_PATTERN_ON;
+
+static uint32_t overrideColor = 0;
+static LedPattern overridePattern = LED_PATTERN_ON;
+static uint32_t overrideEndTime = 0;
+static bool overrideActive = false;
+
+void LEDControl_Init(uint8_t pin)
+{
+    leds.begin();
+    leds.setBrightness(LubeConfig.LED_Max_Brightness);
+    leds.setPixelColor(0, 0);
+    leds.show();
+}
+
+void LEDControl_SetBasic(uint32_t color, LedPattern pattern)
+{
+    basicColor = color;
+    basicPattern = pattern;
+}
+
+void LEDControl_SetOverride(uint32_t color, LedPattern pattern, uint32_t durationMs)
+{
+    overrideColor = color;
+    overridePattern = pattern;
+    overrideEndTime = millis() + durationMs;
+    overrideActive = true;
+    if (durationMs == 0)
+        overrideEndTime = 0xFFFFFFFF; // Kein Timeout
+}
+
+void LEDControl_ClearOverride()
+{
+    overrideActive = false;
+    overrideEndTime = 0;
+}
+
+void LEDControl_Update()
+{
+    uint32_t now = millis();
+    uint32_t color = basicColor;
+    LedPattern pattern = basicPattern;
+
+    // Check override
+    if (overrideActive)
+    {
+        if (overrideEndTime != 0xFFFFFFFF && now >= overrideEndTime)
+        {
+            LEDControl_ClearOverride();
+        }
+        else
+        {
+            color = overrideColor;
+            pattern = overridePattern;
+        }
+    }
+
+    uint8_t brightness = LubeConfig.LED_Min_Brightness;
+    bool on = true;
+
+    switch (pattern)
+    {
+    case LED_PATTERN_ON:
+        brightness = LubeConfig.LED_Max_Brightness;
+        break;
+
+    case LED_PATTERN_FLASH:
+        on = (now % 1000) < 100;
+        brightness = LubeConfig.LED_Max_Brightness;
+        break;
+
+    case LED_PATTERN_FLASH_FAST:
+        on = (now % 500) < 50;
+        brightness = LubeConfig.LED_Max_Brightness;
+        break;
+
+    case LED_PATTERN_BLINK:
+        on = (now % 1000) < 500;
+        brightness = on ? LubeConfig.LED_Max_Brightness : 0;
+        break;
+
+    case LED_PATTERN_BLINK_FAST:
+        on = (now % 400) < 200;
+        brightness = on ? LubeConfig.LED_Max_Brightness : 0;
+        break;
+
+    case LED_PATTERN_BREATH:
+    {
+        uint32_t t = now % 2000;
+        if (t < 600)
+        {
+            // Schnell hochdimmen (600 ms)
+            brightness = map(t, 0, 600, LubeConfig.LED_Min_Brightness, LubeConfig.LED_Max_Brightness);
+        }
+        else
+        {
+            // Langsam runterdimmen (1400 ms)
+            brightness = map(t, 600, 2000, LubeConfig.LED_Max_Brightness, LubeConfig.LED_Min_Brightness);
+        }
+        break;
+    }
+    case LED_PATTERN_BREATH_REVERSE:
+    {
+        uint32_t t = now % 2000;
+        if (t < 1400)
+        {
+            // Langsam hochdimmen (1400 ms)
+            brightness = map(t, 0, 1400, LubeConfig.LED_Min_Brightness, LubeConfig.LED_Max_Brightness);
+        }
+        else
+        {
+            // Schnell runterdimmen (600 ms)
+            brightness = map(t, 1400, 2000, LubeConfig.LED_Max_Brightness, LubeConfig.LED_Min_Brightness);
+        }
+        break;
+    }
+    }
+
+    leds.setBrightness(brightness);
+    leds.setPixelColor(0, on ? color : 0);
+    leds.show();
+}

Software/src/lubeapp.cpp

@@ -12,6 +12,7 @@
  */
 
 #include "lubeapp.h"
+#include "ledcontrol.h"
 
 uint32_t lubePulseTimestamp = 0;
 
@@ -27,6 +28,9 @@ uint32_t lubePulseTimestamp = 0;
  */
 void RunLubeApp(uint32_t add_milimeters)
 {
+    static tSystem_Status lastSystemStatus = sysStat_Startup;
+    static uint16_t washModeDistance = 0;   
+
     // Calculate and update tank percentage
     globals.TankPercentage = PersistenceData.tankRemain_microL / (LubeConfig.tankCapacity_ml * 10);
 
@@ -49,17 +53,31 @@ void RunLubeApp(uint32_t add_milimeters)
     switch (globals.systemStatus)
     {
     case sysStat_Startup:
-        strcpy_P(globals.systemStatustxt, PSTR("Startup"));
+
+        if (lastSystemStatus != globals.systemStatus)
+        {
+            strcpy_P(globals.systemStatustxt, PSTR("Startup"));
+            LEDControl_SetBasic(LED_STARTUP_NORMAL, LED_PATTERN_BLINK);
+            lastSystemStatus = globals.systemStatus;
+            globals.resumeStatus = sysStat_Startup;
+        }
+
         // Transition to Normal status after startup delay
         if (millis() > STARTUP_DELAY)
         {
             globals.systemStatus = sysStat_Normal;
-            globals.resumeStatus = sysStat_Normal;
         }
         break;
 
     case sysStat_Normal:
-        strcpy_P(globals.systemStatustxt, PSTR("Normal"));
+        if (lastSystemStatus != globals.systemStatus)
+        {
+            strcpy_P(globals.systemStatustxt, PSTR("Normal"));
+            LEDControl_SetBasic(LED_NORMAL_COLOR, LED_PATTERN_ON);
+            lastSystemStatus = globals.systemStatus;
+            globals.resumeStatus = sysStat_Normal;
+        }
+
         // Trigger lube pulse if traveled distance exceeds the configured limit
         if (PersistenceData.TravelDistance_highRes_mm / 1000 > LubeConfig.DistancePerLube_Default)
         {
@@ -69,7 +87,14 @@ void RunLubeApp(uint32_t add_milimeters)
         break;
 
     case sysStat_Rain:
-        strcpy_P(globals.systemStatustxt, PSTR("Rain"));
+        if (lastSystemStatus != globals.systemStatus)
+        {
+            strcpy_P(globals.systemStatustxt, PSTR("Rain"));
+            LEDControl_SetBasic(LED_RAIN_COLOR, LED_PATTERN_ON);
+            lastSystemStatus = globals.systemStatus;
+            globals.resumeStatus = sysStat_Rain;
+        }
+
         // Trigger lube pulse if traveled distance exceeds the configured limit in Rain mode
         if (PersistenceData.TravelDistance_highRes_mm / 1000 > LubeConfig.DistancePerLube_Rain)
         {
@@ -78,8 +103,41 @@ void RunLubeApp(uint32_t add_milimeters)
         }
         break;
 
+    case sysStat_Wash:
+        if (lastSystemStatus != globals.systemStatus)
+        {
+            washModeDistance = LubeConfig.WashMode_Distance;
+            strcpy_P(globals.systemStatustxt, PSTR("Wash"));
+            LEDControl_SetBasic(LED_WASH_COLOR, LED_PATTERN_BREATH);
+            lastSystemStatus = globals.systemStatus;
+        }
+
+        // Trigger lube pulse if traveled distance exceeds the configured Interval in Wash mode
+        if (PersistenceData.TravelDistance_highRes_mm / 1000 > LubeConfig.WashMode_Interval)
+        {
+            LubePulse();
+            PersistenceData.TravelDistance_highRes_mm = 0;
+
+            if (washModeDistance >= LubeConfig.WashMode_Distance)
+            {
+                washModeDistance = washModeDistance - LubeConfig.WashMode_Interval;
+            }
+            else
+            {
+                globals.systemStatus = globals.resumeStatus;
+            }
+        }
+        break;
+
     case sysStat_Purge:
-        strcpy_P(globals.systemStatustxt, PSTR("Purge"));
+        if (lastSystemStatus != globals.systemStatus)
+        {
+            globals.purgePulses = LubeConfig.BleedingPulses;
+            strcpy_P(globals.systemStatustxt, PSTR("Purge"));
+            LEDControl_SetBasic(LED_PURGE_COLOR, LED_PATTERN_BLINK);
+            lastSystemStatus = globals.systemStatus;
+        }
+
         // Execute lube pulses during the Purge status
         if (globals.purgePulses > 0)
         {
@@ -99,12 +157,26 @@ void RunLubeApp(uint32_t add_milimeters)
         break;
 
     case sysStat_Error:
-        strcpy_P(globals.systemStatustxt, PSTR("Error"));
+
+        if (lastSystemStatus != globals.systemStatus)
+        {
+            strcpy_P(globals.systemStatustxt, PSTR("Error"));
+            LEDControl_SetBasic(LED_ERROR_COLOR, LED_PATTERN_BLINK_FAST);
+            lastSystemStatus = globals.systemStatus;
+        }
+
         globals.purgePulses = 0;
         break;
 
     case sysStat_Shutdown:
-        strcpy_P(globals.systemStatustxt, PSTR("Shutdown"));
+
+        if (lastSystemStatus != globals.systemStatus)
+        {
+            strcpy_P(globals.systemStatustxt, PSTR("Shutdown"));
+            LEDControl_SetBasic(LED_SHUTDOWN_COLOR, LED_PATTERN_BREATH_REVERSE);
+            lastSystemStatus = globals.systemStatus;
+        }
+
         break;
 
     default:

Software/src/main.cpp

@@ -39,6 +39,10 @@
 #include "led_colors.h"
 #include "obd2_kline.h"
 #include "obd2_can.h"
+#include "buttoncontrol.h"
+#include "button_actions.h"
+#include "ledcontrol.h"
+
 
 #ifdef FEATURE_ENABLE_WIFI_CLIENT
 #include <ESP8266WiFiMulti.h>
@@ -59,12 +63,10 @@ Adafruit_NeoPixel leds(1, GPIO_LED, NEO_RGB + NEO_KHZ800);
 
 // Function-Prototypes
 void IRAM_ATTR trigger_ISR();
-void LED_Process(uint8_t override = false, uint32_t setColor = LED_DEFAULT_COLOR);
 #ifdef FEATURE_ENABLE_OLED
 U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(-1);
 void Display_Process();
 #endif
-void Button_Process();
 void toggleWiFiAP(bool shutdown = false);
 void SystemShutdown(bool restart = false);
 uint32_t Process_Impulse_WheelSpeed();
@@ -134,7 +136,7 @@ void setup()
   Serial.print("\nEE-Init done");
 
   // Initialize LEDs
-  leds.begin();
+  LEDControl_Init(GPIO_LED);
   Serial.print("\nLED-Init done");
 
   // Initialize based on the chosen speed source (CAN, GPS, Impulse)
@@ -175,6 +177,8 @@ void setup()
   pinMode(GPIO_BUTTON, INPUT_PULLUP);
   pinMode(GPIO_PUMP, OUTPUT);
 
+  ButtonControl_Init(GPIO_BUTTON, buttonActions, buttonActionCount);
+
   // Set up OTA updates
   ArduinoOTA.setPort(8266);
   ArduinoOTA.setHostname(globals.DeviceName);
@@ -249,8 +253,8 @@ void loop()
 
   // Process button input, manage LED behavior, perform EEPROM tasks, handle webserver operations,
   // process Diagnostic Trouble Codes (DTC), and manage debugging
-  Button_Process();
-  LED_Process();
+  ButtonControl_Update();
+  LEDControl_Update();
   EEPROM_Process();
   Webserver_Process();
   DTC_Process();
@@ -340,208 +344,6 @@ void trigger_ISR()
   wheel_pulse++;
 }
 
-/**
- * @brief Manages LED behavior based on the current system status and user overrides.
- *
- * This function handles LED behavior, including startup animations, confirmation animations for
- * normal and rain modes, indication for purge, error, shutdown, and normal operation. It supports
- * user overrides to set a specific LED color. The LED status is determined by the current system
- * status, and specific LED patterns are displayed accordingly.
- *
- * @param override Flag indicating whether to override the LED behavior (0: No override, 1: Override, 2: Resume previous state).
- * @param SetColor The color to set when overriding the LED behavior.
- */
-void LED_Process(uint8_t override, uint32_t SetColor)
-{
-  // Enumeration to represent LED status
-  typedef enum
-  {
-    LED_Startup,
-    LED_Normal,
-    LED_Confirm_Normal,
-    LED_Rain,
-    LED_Confirm_Rain,
-    LED_Purge,
-    LED_Error,
-    LED_Shutdown,
-    LED_Override
-  } tLED_Status;
-
-  // Static variables to track LED status, system status, override color, and previous LED status
-  static tSystem_Status oldSysStatus = sysStat_Startup;
-  static tLED_Status LED_Status = LED_Startup;
-  static uint32_t LED_override_color = 0;
-  static tLED_Status LED_ResumeOverrideStatus = LED_Startup;
-
-  // Variables for managing LED animation timing
-  uint8_t color = 0;
-  uint32_t timer = 0;
-  uint32_t animtimer = 0;
-  static uint32_t timestamp = 0;
-  timer = millis();
-
-  // Handle LED overrides
-  if (override == 1)
-  {
-    if (LED_Status != LED_Override)
-    {
-      LED_ResumeOverrideStatus = LED_Status;
-      Debug_pushMessage("Override LED_Status\n");
-    }
-    LED_Status = LED_Override;
-    LED_override_color = SetColor;
-  }
-
-  if (override == 2)
-  {
-    if (LED_Status == LED_Override)
-    {
-      LED_Status = LED_ResumeOverrideStatus;
-      Debug_pushMessage("Resume LED_Status\n");
-    }
-  }
-
-  // Update LED status when system status changes
-  if (oldSysStatus != globals.systemStatus)
-  {
-    switch (globals.systemStatus)
-    {
-    case sysStat_Startup:
-      LED_Status = LED_Startup;
-      Debug_pushMessage("sysStat: Startup\n");
-      break;
-    case sysStat_Normal:
-      timestamp = timer + 3500;
-      LED_Status = LED_Confirm_Normal;
-      Debug_pushMessage("sysStat: Normal\n");
-      break;
-    case sysStat_Rain:
-      timestamp = timer + 3500;
-      LED_Status = LED_Confirm_Rain;
-      Debug_pushMessage("sysStat: Rain\n");
-      break;
-    case sysStat_Purge:
-      LED_Status = LED_Purge;
-      Debug_pushMessage("sysStat: Purge\n");
-      break;
-    case sysStat_Error:
-      LED_Status = LED_Error;
-      Debug_pushMessage("sysStat: Error\n");
-      break;
-    case sysStat_Shutdown:
-      LED_Status = LED_Shutdown;
-      Debug_pushMessage("sysStat: Shutdown\n");
-      break;
-    default:
-      break;
-    }
-    oldSysStatus = globals.systemStatus;
-  }
-
-  // Handle different LED statuses
-  switch (LED_Status)
-  {
-  case LED_Startup:
-    leds.setBrightness(LubeConfig.LED_Max_Brightness);
-
-    if (globals.TankPercentage < LubeConfig.TankRemindAtPercentage)
-      leds.setPixelColor(0, LED_STARTUP_TANKWARN);
-    else
-      leds.setPixelColor(0, LED_STARTUP_NORMAL);
-    break;
-
-  case LED_Confirm_Normal:
-    animtimer = timer % 500;
-    color = map(animtimer / 2, 0, 250, 0, LubeConfig.LED_Max_Brightness);
-    leds.setPixelColor(0, LED_NORMAL_COLOR);
-    if (animtimer < 250)
-      leds.setBrightness(color);
-    else
-      leds.setBrightness(LubeConfig.LED_Max_Brightness - color);
-
-    if (timestamp < timer)
-    {
-      LED_Status = LED_Normal;
-      Debug_pushMessage("LED_Status: Confirm -> Normal\n");
-    }
-    break;
-
-  case LED_Normal:
-    leds.setBrightness(LubeConfig.LED_Min_Brightness);
-    leds.setPixelColor(0, LED_NORMAL_COLOR);
-
-    if (timer % 2000 > 1950 && LubeConfig.LED_Mode_Flash == true)
-      leds.setBrightness(LubeConfig.LED_Max_Brightness);
-    else if (timer % 2000 > 1500 && WiFi.getMode() != WIFI_OFF)
-      leds.setPixelColor(0, LED_WIFI_BLINK);
-
-    break;
-
-  case LED_Confirm_Rain:
-    animtimer = timer % 500;
-    color = map(animtimer / 2, 0, 250, 0, LubeConfig.LED_Max_Brightness);
-    leds.setPixelColor(0, LED_RAIN_COLOR);
-    if (animtimer < 250)
-      leds.setBrightness(color);
-    else
-      leds.setBrightness(LubeConfig.LED_Max_Brightness - color);
-    if (timestamp < timer)
-    {
-      LED_Status = LED_Rain;
-      Debug_pushMessage("LED_Status: Confirm -> Rain\n");
-    }
-    break;
-
-  case LED_Rain:
-    leds.setBrightness(LubeConfig.LED_Min_Brightness);
-    leds.setPixelColor(0, LED_RAIN_COLOR);
-
-    if (timer % 2000 > 1950 && LubeConfig.LED_Mode_Flash == true)
-      leds.setBrightness(LubeConfig.LED_Max_Brightness);
-    else if (timer % 2000 > 1500 && WiFi.getMode() != WIFI_OFF)
-      leds.setPixelColor(0, LED_WIFI_BLINK);
-
-    break;
-
-  case LED_Purge:
-    timer = timer % 500;
-    color = map(timer / 2, 0, 250, LubeConfig.LED_Min_Brightness, LubeConfig.LED_Max_Brightness);
-    leds.setPixelColor(0, LED_PURGE_COLOR);
-    if (timer < 250)
-      leds.setBrightness(color);
-    else
-      leds.setBrightness(LubeConfig.LED_Max_Brightness - color);
-    break;
-
-  case LED_Error:
-    leds.setBrightness(LubeConfig.LED_Max_Brightness);
-    leds.setPixelColor(0, timer % 500 > 250 ? LED_ERROR_BLINK : 0);
-    break;
-
-  case LED_Shutdown:
-    timer = timer % 600;
-    leds.setPixelColor(0, LED_SHUTDOWN_BLINK);
-    if (timer < 500)
-    {
-      color = map(timer, 0, 500, LubeConfig.LED_Max_Brightness, LubeConfig.LED_Min_Brightness);
-      leds.setBrightness(color);
-    }
-    else
-    {
-      leds.setBrightness(LubeConfig.LED_Min_Brightness);
-    }
-    break;
-
-  case LED_Override:
-    leds.setBrightness(LubeConfig.LED_Max_Brightness);
-    leds.setPixelColor(0, LED_override_color);
-    break;
-
-  default:
-    break;
-  }
-  leds.show();
-}
 
 #ifdef FEATURE_ENABLE_OLED
 /**
@@ -597,119 +399,6 @@ void Display_Process()
 }
 #endif
 
-/**
- * @brief Processes the button input and performs corresponding actions based on button state and timing.
- *
- * This function handles the button input, detecting button presses and executing actions based on
- * predefined time delays. Actions include toggling WiFi, starting purge, toggling operating modes,
- * and displaying feedback through LEDs. The function utilizes an enumeration to track button actions
- * and manages the timing for different actions.
- */
-void Button_Process()
-{
-  // Time delays for different button actions
-#define BUTTON_ACTION_DELAY_TOGGLEMODE 500
-#define BUTTON_ACTION_DELAY_PURGE 3500
-#define BUTTON_ACTION_DELAY_WIFI 6500
-#define BUTTON_ACTION_DELAY_NOTHING 9500
-
-  // Enumeration to represent button actions
-  typedef enum buttonAction_e
-  {
-    BTN_INACTIVE,
-    BTN_NOTHING,
-    BTN_TOGGLEMODE,
-    BTN_TOGGLEWIFI,
-    BTN_STARTPURGE
-  } buttonAction_t;
-
-  // Static variables to track button state and timing
-  static uint32_t buttonTimestamp = 0;
-  static buttonAction_t buttonAction = BTN_INACTIVE;
-
-  // Check if button is pressed (LOW)
-  if (digitalRead(GPIO_BUTTON) == LOW)
-  {
-    // Update button timestamp on the first button press
-    if (buttonTimestamp == 0)
-      buttonTimestamp = millis();
-
-    // Check and execute actions based on predefined time delays
-    if (buttonTimestamp + BUTTON_ACTION_DELAY_NOTHING < millis())
-    {
-      LED_Process(1, COLOR_WARM_WHITE);
-      buttonAction = BTN_NOTHING;
-    }
-    else if (buttonTimestamp + BUTTON_ACTION_DELAY_WIFI < millis())
-    {
-      LED_Process(1, LED_WIFI_BLINK);
-      buttonAction = BTN_TOGGLEWIFI;
-    }
-    else if (buttonTimestamp + BUTTON_ACTION_DELAY_PURGE < millis())
-    {
-      LED_Process(1, LED_PURGE_COLOR);
-      buttonAction = BTN_STARTPURGE;
-    }
-    else if (buttonTimestamp + BUTTON_ACTION_DELAY_TOGGLEMODE < millis())
-    {
-      uint32_t color = globals.systemStatus == sysStat_Normal ? LED_RAIN_COLOR : LED_NORMAL_COLOR;
-      LED_Process(1, color);
-      buttonAction = BTN_TOGGLEMODE;
-    }
-  }
-  else // Button is released
-  {
-    // Execute corresponding actions based on the detected button action
-    if (buttonAction != BTN_INACTIVE)
-    {
-      switch (buttonAction)
-      {
-      case BTN_TOGGLEWIFI:
-        toggleWiFiAP();
-        Debug_pushMessage("Starting WiFi AP\n");
-        break;
-
-      case BTN_STARTPURGE:
-        globals.systemStatus = sysStat_Purge;
-        globals.purgePulses = LubeConfig.BleedingPulses;
-        Debug_pushMessage("Starting Purge\n");
-        break;
-
-      case BTN_TOGGLEMODE:
-        switch (globals.systemStatus)
-        {
-        case sysStat_Normal:
-          globals.systemStatus = sysStat_Rain;
-          globals.resumeStatus = sysStat_Rain;
-          break;
-
-        case sysStat_Rain:
-          globals.systemStatus = sysStat_Normal;
-          globals.resumeStatus = sysStat_Normal;
-          break;
-
-        default:
-          break;
-        }
-        Debug_pushMessage("Toggling Mode\n");
-        break;
-
-      case BTN_NOTHING:
-      default:
-        Debug_pushMessage("Nothing or invalid\n");
-        break;
-      }
-
-      // Display feedback through LEDs
-      LED_Process(2);
-    }
-
-    // Reset button state and timestamp
-    buttonAction = BTN_INACTIVE;
-    buttonTimestamp = 0;
-  }
-}
-
 /**
  * @brief Toggles the WiFi functionality based on the current status.
  *
@@ -722,6 +411,8 @@ void Button_Process()
  */
 void toggleWiFiAP(bool shutdown)
 {
+  LEDControl_SetOverride(LED_WIFI_COLOR, LED_PATTERN_BLINK_FAST, 2500);
+
   // Check if WiFi is currently active
   if (WiFi.getMode() != WIFI_OFF)
   {
@@ -788,6 +479,36 @@ void SystemShutdown(bool restart)
   }
 }
 
+void onToggleMode()
+{
+    if (globals.systemStatus == sysStat_Normal)
+    {
+        globals.systemStatus = sysStat_Rain;
+        globals.resumeStatus = sysStat_Rain;
+    }
+    else if (globals.systemStatus == sysStat_Rain)
+    {
+        globals.systemStatus = sysStat_Normal;
+        globals.resumeStatus = sysStat_Normal;
+    }
+    Debug_pushMessage("Toggling Mode\n");
+}
+
+void onStartPurge()
+{
+    globals.systemStatus = sysStat_Purge;
+    globals.purgePulses = LubeConfig.BleedingPulses;
+    Debug_pushMessage("Starting Purge\n");
+}
+
+
+void onWashMode()
+{
+    Debug_pushMessage("Wash mode start\n");
+    // Hier könntest du später gezieltes Nachölen implementieren
+}
+
+
 /**
  * @brief Processes the impulses from the wheel speed sensor and converts them into traveled distance.
  *

Software/src/struct2json.cpp

@@ -3,10 +3,10 @@
  *
  * @brief Implementation file for converting structs to JSON objects.
  *
- * @note This file is auto-generated by a script on 2024-01-30 20:29:34.
+ * @note This file is auto-generated by a script on 2025-06-15 11:37:51.
  *
  * @author Marcel Peterkau
- * @date   30.01.2024
+ * @date   15.06.2025
  */
 
 
@@ -26,6 +26,8 @@ void generateJsonObject_LubeConfig(JsonObject data)
     data["RimDiameter_Inch"] = LubeConfig.RimDiameter_Inch;
     data["DistancePerRevolution_mm"] = LubeConfig.DistancePerRevolution_mm;
     data["BleedingPulses"] = LubeConfig.BleedingPulses;
+    data["WashMode_Distance"] = LubeConfig.WashMode_Distance;
+    data["WashMode_Interval"] = LubeConfig.WashMode_Interval;
     data["SpeedSource"] = LubeConfig.SpeedSource;
     data["GPSBaudRate"] = LubeConfig.GPSBaudRate;
     data["CANSource"] = LubeConfig.CANSource;
@@ -52,4 +54,4 @@ void generateJsonObject_PersistenceData(JsonObject data)
 
 
 
-// CODEGENERATOR_CHECKSUM: 59f35aadffd0bbef253210ea2fbaaf9a515553a2e3cc9bf4cfa2819b63c969ce
+// CODEGENERATOR_CHECKSUM: 4702cb49ea55617cbb34715164810bb58d3c3f46fb1653b6f47bd4fd9cb0031e

Software/src/webui.cpp

@@ -480,7 +480,6 @@ void Websocket_HandleButtons(uint8_t *data)
   else if (strcmp(identifier, "purgenow") == 0)
   {
     globals.systemStatus = sysStat_Purge;
-    globals.purgePulses = LubeConfig.BleedingPulses;
   }
   else if (strcmp(identifier, "sourcesave") == 0)
   {
@@ -499,6 +498,7 @@ void Websocket_HandleButtons(uint8_t *data)
   else if (strcmp(identifier, "resettank") == 0)
   {
     PersistenceData.tankRemain_microL = LubeConfig.tankCapacity_ml * 1000;
+    globals.requestEEAction = EE_PDS_SAVE;
   }
   else
   {
@@ -580,6 +580,14 @@ void Websocket_HandleSettings(uint8_t *data)
   {
     strncpy(LubeConfig.wifi_client_password, value, sizeof(LubeConfig.wifi_client_password));
   }
+  else if (strcmp(identifier, "washinterval") == 0)
+  {
+    LubeConfig.WashMode_Interval = atoi(value);
+  }
+  else if (strcmp(identifier, "washdistance") == 0)
+  {
+    LubeConfig.WashMode_Distance = atoi(value);
+  }
   else
   {
     Debug_pushMessage("Got unknown Settings-id and value '%s' from ws-client\n", identifier);
@@ -700,6 +708,8 @@ void Websocket_RefreshClientData_Static(uint32_t client_id, bool send_mapping)
     const char mapping[] = "MAPPING_STATIC:"
                            "lubedistancenormal;"
                            "lubedistancerain;"
+                           "washdistance;"
+                           "washinterval;"
                            "tankcap;"
                            "pumppulse;"
                            "tankwarn;"
@@ -730,6 +740,8 @@ void Websocket_RefreshClientData_Static(uint32_t client_id, bool send_mapping)
 
   temp.concat(String(LubeConfig.DistancePerLube_Default) + ";");
   temp.concat(String(LubeConfig.DistancePerLube_Rain) + ";");
+  temp.concat(String(LubeConfig.WashMode_Distance) + ";");
+  temp.concat(String(LubeConfig.WashMode_Interval) + ";");
   temp.concat(String(LubeConfig.tankCapacity_ml) + ";");
   temp.concat(String(LubeConfig.amountPerDose_microL) + ";");
   temp.concat(String(LubeConfig.TankRemindAtPercentage) + ";");