WebUI-improvements

Software/platformio.ini

@@ -33,8 +33,12 @@ build_flags =
   -DWIFI_AP_IP_GW=10,0,0,1
   -DFEATURE_ENABLE_WIFI_CLIENT
   -DFEATURE_ENABLE_REMOTE_DEBUG
+  ;-DFEATURE_ENABLE_OLED
   ;-DFEATURE_ENABLE_CAN
   ;-DFEATURE_ENABLE_GPS
+  -DPCB_REV=2
+
+build_type = debug
 
 board_build.filesystem = littlefs
 

Software/src/common.h

@@ -4,11 +4,25 @@
 #define Q(x) #x
 #define QUOTE(x) Q(x)
 
-#define GPIO_BUTTON D4
+#ifndef PCB_REV
-#define GPIO_LED D3
+    #error "You must define PCB_REV"
-#define GPIO_TRIGGER D6
+#elif PCB_REV == 2
-#define GPIO_PUMP D0
+    #define GPIO_BUTTON D7
-#define GPIO_CS_CAN D8
+    #define GPIO_LED D8
+    #define GPIO_TRIGGER D6
+    #define GPIO_PUMP D5
+#elif PCB_REV == 1 || PCB_REV == 3
+    #define GPIO_BUTTON D5
+    #define GPIO_LED D6
+    #define GPIO_TRIGGER D4
+    #define GPIO_PUMP D3
+#elif PCB_REV >= 4
+    #define GPIO_BUTTON D4
+    #define GPIO_LED D3
+    #define GPIO_TRIGGER D6
+    #define GPIO_PUMP D0
+    #define GPIO_CS_CAN D8
+#endif
 
 #ifndef HOST_NAME
 #define HOST_NAME "ChainLube_%06X" // Use printf-Formatting - Chip-ID (uin32_t) will be added

Software/src/config.cpp

@@ -54,6 +54,11 @@ void EEPROM_Process()
     GetPersistence_EEPROM();
     globals.requestEEAction = EE_IDLE;
     break;
+  case EE_ALL_SAVE:
+    StorePersistence_EEPROM();
+    StoreConfig_EEPROM();
+    globals.requestEEAction = EE_IDLE;
+    break;
   case EE_IDLE:
   default:
     globals.requestEEAction = EE_IDLE;

Software/src/globals.h

@@ -19,7 +19,8 @@ typedef enum eEERequest
   EE_CFG_SAVE,
   EE_CFG_LOAD,
   EE_PDS_SAVE,
-  EE_PDS_LOAD
+  EE_PDS_LOAD,
+  EE_ALL_SAVE
 } tEERequest;
 
 typedef struct Globals_s

Software/src/lubeapp.cpp

@@ -81,22 +81,22 @@ void RunLubeApp(uint32_t add_milimeters)
     switch (globals.systemStatus)
     {
     case sysStat_Normal:
-        strcpy(globals.systemStatustxt, PSTR("Normal"));
+        strcpy_P(globals.systemStatustxt, PSTR("Normal"));
         break;
     case sysStat_Purge:
-        strcpy(globals.systemStatustxt, PSTR("Purge"));
+        strcpy_P(globals.systemStatustxt, PSTR("Purge"));
         break;
     case sysStat_Rain:
-        strcpy(globals.systemStatustxt, PSTR("Rain"));
+        strcpy_P(globals.systemStatustxt, PSTR("Rain"));
         break;
     case sysStat_Startup:
-        strcpy(globals.systemStatustxt, PSTR("Startup"));
+        strcpy_P(globals.systemStatustxt, PSTR("Startup"));
         break;
     case sysStat_Error:
-        strcpy(globals.systemStatustxt, PSTR("Error"));
+        strcpy_P(globals.systemStatustxt, PSTR("Error"));
         break;
     case sysStat_Shutdown:
-        strcpy(globals.systemStatustxt, PSTR("Shutdown"));
+        strcpy_P(globals.systemStatustxt, PSTR("Shutdown"));
         break;
     }
 

Software/src/main.cpp

@@ -1,6 +1,8 @@
 #include <Arduino.h>
 #include <Wire.h>
+#ifdef FEATURE_ENABLE_OLED
 #include <U8g2lib.h>
+#endif
 #include <ESP8266WiFi.h>
 #include <ArduinoOTA.h>
 
@@ -45,13 +47,15 @@ Globals_t globals;
 uint32_t TravelDistance_highRes;
 volatile uint32_t wheel_pulse = 0;
 
-U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(-1);
 CRGB leds[1];
 
 // Function-Prototypes
 void IRAM_ATTR trigger_ISR();
 void LED_Process(uint8_t override = false, CRGB setColor = CRGB::White);
+#ifdef FEATURE_ENABLE_OLED
+U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(-1);
 void Display_Process();
+#endif
 void Button_Process();
 void toggleWiFiAP(boolean shutdown = false);
 void SystemShutdown();
@@ -105,11 +109,11 @@ void setup()
   InitEEPROM();
   GetConfig_EEPROM();
   GetPersistence_EEPROM();
-
+#ifdef FEATURE_ENABLE_OLED
   u8x8.begin();
   u8x8.setFont(u8x8_font_chroma48medium8_r);
-
+#endif
-  FastLED.addLeds<WS2811, GPIO_LED, GRB>(leds, 1); // GRB ordering is assumed
+  FastLED.addLeds<WS2811, GPIO_LED, RGB>(leds, 1); // GRB ordering is assumed
 
   switch (LubeConfig.SpeedSource)
   {
@@ -154,7 +158,7 @@ void setup()
   ArduinoOTA.setPort(8266);
   ArduinoOTA.setHostname(globals.DeviceName);
   ArduinoOTA.setPassword(QUOTE(ADMIN_PASSWORD));
-
+#ifdef FEATURE_ENABLE_OLED
   ArduinoOTA.onStart([]()
                      {
                        u8x8.clearDisplay();
@@ -180,12 +184,14 @@ void setup()
                      u8x8.clearDisplay();
                      u8x8.drawString(0, 0, "OTA-Restart");
                      u8x8.refreshDisplay(); });
-
+#endif
   ArduinoOTA.begin();
 
+#ifdef FEATURE_ENABLE_OLED
   u8x8.clearDisplay();
   u8x8.drawString(0, 0, "KTM ChainLube V1");
   u8x8.refreshDisplay();
+#endif
 
   initWebUI();
   initGlobals();
@@ -218,7 +224,9 @@ void loop()
 
   RunLubeApp(wheelDistance);
   EEPROMCyclicPDSTicker.update();
+#ifdef FEATURE_ENABLE_OLED
   Display_Process();
+#endif
   Button_Process();
   LED_Process();
   EEPROM_Process();
@@ -277,7 +285,7 @@ void processCmdRemoteDebug()
   else if (lastCmd == "dumpPDS")
     RemoteDebug_dumpPersistance();
   else if (lastCmd == "saveEE")
-    StoreConfig_EEPROM();
+    globals.requestEEAction == EE_ALL_SAVE;
   else if (lastCmd == "showdtc")
     RemoteDebug_ShowDTCs();
 }
@@ -572,7 +580,7 @@ void LED_Process(uint8_t override, CRGB SetColor)
   }
   FastLED.show();
 }
-
+#ifdef FEATURE_ENABLE_OLED
 void Display_Process()
 {
   static tSystem_Status oldSysStatus = sysStat_Startup;
@@ -604,6 +612,7 @@ void Display_Process()
   }
   u8x8.refreshDisplay();
 }
+#endif
 
 void Button_Process()
 {
@@ -740,6 +749,7 @@ uint32_t Process_Impulse_WheelSpeed()
   return add_milimeters;
 }
 
+#ifdef FEATURE_ENABLE_REMOTE_DEBUG
 void RemoteDebug_ShowDTCs()
 {
   char buff_timestamp[16]; // Format: DD-hh:mm:ss:xxx
@@ -767,3 +777,4 @@ void RemoteDebug_ShowDTCs()
     }
   }
 }
+#endif

Software/src/webui.cpp

@@ -98,20 +98,24 @@ String processor(const String &var)
   }
   if (var == "SHOW_IMPULSE_SETTINGS")
     return LubeConfig.SpeedSource == SOURCE_IMPULSE ? "" : "hidden";
-#ifdef FEATURE_ENABLE_CAN
   if (var == "SHOW_CAN_SETTINGS")
+#ifdef FEATURE_ENABLE_CAN
     return LubeConfig.SpeedSource == SOURCE_CAN ? "" : "hidden";
+#else
+    return "hidden";
 #endif
-#ifdef FEATURE_ENABLE_GPS
   if (var == "SHOW_GPS_SETTINGS")
+#ifdef FEATURE_ENABLE_GPS
     return LubeConfig.SpeedSource == SOURCE_GPS ? "" : "hidden";
+#else
+    return "hidden";
 #endif
   if (var == "SHOW_DTC_TABLE")
     return globals.systemStatus == sysStat_Error ? "" : "hidden";
 
   if (var == "DTC_TABLE")
   {
-    String temp;
+    String temp = "";
     char buff_timestamp[16]; // Format: DD-hh:mm:ss:xxx
 
     for (uint32_t i = 0; i < MAX_DTC_STORAGE; i++)
@@ -125,7 +129,7 @@ String processor(const String &var)
                 DTCStorage[i].timestamp / 1000 % 60,   // Seconds
                 DTCStorage[i].timestamp % 1000);       // milliseconds
 
-        temp = "<tr><td>" + String(buff_timestamp);
+        temp = temp + "<tr><td>" + String(buff_timestamp);
         temp = temp + "</td><td>" + String(DTCStorage[i].Number) + "</td><td>";
 
         if (DTCStorage[i].active == DTC_ACTIVE)