Base Software System

Hardware/oiler SMD.sch

@@ -220,6 +220,7 @@ F 0 "D2" V 8296 4320 50  0000 R CNN
 F 1 "BAT42" V 8205 4320 50  0000 R CNN
 F 2 "Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal" H 8250 4225 50  0001 C CNN
 F 3 "http://www.vishay.com/docs/85660/bat42.pdf" H 8250 4400 50  0001 C CNN
+F 4 "BAT 42" H 8250 4400 50  0001 C CNN "Reichelt Order No."
 	1    8250 4400
 	0    -1   -1   0   
 $EndComp
@@ -310,6 +311,7 @@ F 0 "D1" V 7796 4320 50  0000 R CNN
 F 1 "BAT42" V 7705 4320 50  0000 R CNN
 F 2 "Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal" H 7750 4225 50  0001 C CNN
 F 3 "http://www.vishay.com/docs/85660/bat42.pdf" H 7750 4400 50  0001 C CNN
+F 4 "BAT 42" H 7750 4400 50  0001 C CNN "Reichelt Order No."
 	1    7750 4400
 	0    -1   -1   0   
 $EndComp
@@ -338,6 +340,7 @@ F 0 "C3" H 9568 2246 50  0000 L CNN
 F 1 "470µF" H 9568 2155 50  0000 L CNN
 F 2 "Capacitor_SMD:CP_Elec_8x10" H 9488 2050 50  0001 C CNN
 F 3 "~" H 9450 2200 50  0001 C CNN
+F 4 "ECC MZS350ARA471" H 9450 2200 50  0001 C CNN "Reichelt Order No."
 	1    9450 2200
 	1    0    0    -1  
 $EndComp
@@ -363,6 +366,7 @@ F 0 "C4" H 10668 2246 50  0000 L CNN
 F 1 "100µ" H 10668 2155 50  0000 L CNN
 F 2 "Capacitor_SMD:CP_Elec_6.3x7.7" H 10588 2050 50  0001 C CNN
 F 3 "~" H 10550 2200 50  0001 C CNN
+F 4 "ECC HXE250ARA101" H 10550 2200 50  0001 C CNN "Reichelt Order No."
 	1    10550 2200
 	1    0    0    -1  
 $EndComp

Software/ChainLube/.gitignore

@@ -0,0 +1,6 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch
+wifi_credentials.ini

Software/ChainLube/.vscode/extensions.json

@@ -0,0 +1,7 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ]
+}

Software/ChainLube/include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

Software/ChainLube/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

Software/ChainLube/platformio.ini

@@ -0,0 +1,43 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[platformio]
+extra_configs =
+  wifi_credentials.ini
+
+[env:d1_mini]
+platform = espressif8266
+board = d1_mini
+framework = arduino
+
+
+;upload_port = 192.168.0.20
+;upload_protocol = espota
+;upload_flags =  
+;    --auth="chainlube"
+upload_protocol=esptool
+
+build_flags =
+  ;-DDEBUG
+  -fexceptions
+
+build_unflags = -fno-exceptions
+build_type = debug
+board_build.filesystem = littlefs
+
+monitor_filters = esp8266_exception_decoder
+monitor_speed = 115200
+
+board_build.ldscript = eagle.flash.4m3m.ld
+lib_ldf_mode = deep
+lib_deps = 
+    olikraus/U8g2 @ ^2.28.8
+    joaolopesf/RemoteDebug @ ^2.1.2
+    fastled/FastLED @ ^3.5.0

Software/ChainLube/src/common.h

@@ -0,0 +1,27 @@
+#ifndef _COMMON_H_
+#define _COMMON_H_
+
+#define GPIO_BUTTON 14
+#define GPIO_LED D6
+#define GPIO_TRIGGER 2
+#define GPIO_PUMP 0
+
+#ifndef HOST_NAME
+#define HOST_NAME "ChainLube_%06X"      // Use printf-Formatting - Chip-ID (uin32_t) will be added
+#endif
+
+#ifndef OTA_DELAY
+#define OTA_DELAY 50  // ticks -> 10ms / tick
+#endif
+
+#ifndef ADMIN_PASS
+#error "You need to define ADMIN_PASS for OTA-Update"
+#endif
+#ifndef WIFI_PASSWORD
+#error "You must define an WIFI_PASSWORD for OTA-Update"
+#endif
+#ifndef WIFI_SSID 
+#error "You must define an WIFI_SSID for OTA-Update"
+#endif
+
+#endif

Software/ChainLube/src/main.cpp

@@ -0,0 +1,164 @@
+#include <Arduino.h>
+#include <Wire.h>
+#include <U8g2lib.h>
+#include <ESP8266WiFi.h>
+#include <ESP8266WiFiMulti.h>
+#include <ESP8266mDNS.h>
+#include <ArduinoOTA.h>
+#include <RemoteDebug.h>
+#include <FastLED.h>
+
+#include "common.h"
+#include "rmtdbghelp.h"
+
+const char *ssid = WIFI_SSID;
+const char *password = WIFI_PASSWORD;
+
+#ifdef DEBUG
+const bool debug_flag = true;
+#else
+const bool debug_flag = false;
+#endif
+
+bool startSetupMode = false;
+char DeviceName[33];
+
+U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(-1);
+RemoteDebug Debug;
+ESP8266WiFiMulti wifiMulti;
+
+// Function-Prototypes
+String IpAddress2String(const IPAddress &ipAddress);
+void processCmdRemoteDebug();
+void RemotDebug_printSystemInfo();
+void RemoteDebug_printWifiInfo();
+
+CRGB leds[1];
+
+void setup()
+{
+  system_update_cpu_freq(SYS_CPU_80MHZ);
+  snprintf(DeviceName, 32, HOST_NAME, ESP.getChipId());
+  WiFi.mode(WIFI_OFF);
+  WiFi.persistent(false);
+  Serial.begin(115200);
+  Serial.setDebugOutput(true);
+
+  Serial.println("Souko's ChainOiler Mk1");
+  Serial.println(DeviceName);
+
+  u8x8.begin();
+  u8x8.setFont(u8x8_font_chroma48medium8_r);
+
+  pinMode(GPIO_TRIGGER, INPUT_PULLUP);
+  pinMode(GPIO_BUTTON, INPUT_PULLUP);
+  pinMode(GPIO_PUMP, OUTPUT);
+
+  WiFi.mode(WIFI_STA);
+  WiFi.setHostname(DeviceName);
+  wifiMulti.addAP(WIFI_SSID, WIFI_PASSWORD);
+
+  Serial.println("Connecting Wifi...");
+  if (wifiMulti.run() == WL_CONNECTED)
+  {
+    Serial.println("");
+    Serial.println("WiFi connected");
+    Serial.println("IP address: ");
+    Serial.print(WiFi.localIP());
+  }
+
+  if (MDNS.begin(DeviceName))
+    MDNS.addService("telnet", "tcp", 23);
+
+  Debug.begin(DeviceName);        // Initialize the WiFi server
+  Debug.setResetCmdEnabled(true); // Enable the reset command
+  Debug.showProfiler(true);       // Profiler (Good to measure times, to optimize codes)
+  Debug.showColors(true);         // Colors
+
+  Debug.setHelpProjectsCmds(helpCmd);
+  Debug.setCallBackProjectCmds(&processCmdRemoteDebug);
+
+  ArduinoOTA.setPort(8266);
+  ArduinoOTA.setHostname(DeviceName);
+  ArduinoOTA.setPassword(ADMIN_PASS);
+
+  ArduinoOTA.onStart([]()
+                     {
+                       u8x8.clearDisplay();
+                       u8x8.drawString(0, 0, "OTA-Update");
+                       u8x8.refreshDisplay(); });
+
+  ArduinoOTA.onProgress([](unsigned int progress, unsigned int total)
+                        {
+                          static bool refreshed = false;
+                          if (!refreshed)
+                          {
+                            u8x8.clearDisplay();
+                            refreshed = true;
+                            u8x8.drawString(0, 0, "OTA Upload");
+                          }
+                          uint32_t percent = progress / (total / 100);
+                          u8x8.setCursor(0, 1);
+                          u8x8.printf("%d %%", percent);
+                          u8x8.refreshDisplay(); });
+
+  ArduinoOTA.onEnd([]()
+                   {
+                     u8x8.clearDisplay();
+                     u8x8.drawString(0, 0, "OTA-Restart");
+                     u8x8.refreshDisplay(); });
+
+  ArduinoOTA.begin();
+
+  u8x8.clearDisplay();
+  u8x8.drawString(4, 4, "Souko's");
+  u8x8.drawString(1, 5, "ChainLube Mk1");
+  u8x8.refreshDisplay();
+
+  FastLED.addLeds<WS2811, GPIO_LED, GRB>(leds, 1); // GRB ordering is assumed
+}
+
+void loop()
+{
+  leds[0] = digitalRead(GPIO_BUTTON) ? CRGB::Green : CRGB::Red;
+
+  FastLED.show();
+  ArduinoOTA.handle();
+  Debug.handle();
+  yield();
+}
+
+String IpAddress2String(const IPAddress &ipAddress)
+{
+  return String(ipAddress[0]) + String(".") +
+         String(ipAddress[1]) + String(".") +
+         String(ipAddress[2]) + String(".") +
+         String(ipAddress[3]);
+}
+
+void processCmdRemoteDebug()
+{
+  String lastCmd = Debug.getLastCommand();
+
+  if (lastCmd == "sysinfo")
+    RemotDebug_printSystemInfo();
+  else if (lastCmd == "netinfo")
+    RemoteDebug_printWifiInfo();
+}
+
+void RemotDebug_printSystemInfo()
+{
+  debugA("Souko's ChainOiler Mk1");
+  debugA("Hostname: %s", DeviceName);
+
+  debugA("Sdk version: %s", ESP.getSdkVersion());
+  debugA("Core Version: %s", ESP.getCoreVersion().c_str());
+  debugA("Boot Version: %u", ESP.getBootVersion());
+  debugA("Boot Mode: %u", ESP.getBootMode());
+  debugA("CPU Frequency: %u MHz", ESP.getCpuFreqMHz());
+  debugA("Reset reason: %s", ESP.getResetReason().c_str());
+}
+
+void RemoteDebug_printWifiInfo()
+{
+}

Software/ChainLube/src/rmtdbghelp.h

@@ -0,0 +1,2 @@
+const char helpCmd[] = "sysinfo - System Info\r\n"
+                       "netinfo - WiFi Info\r\n";

Software/ChainLube/src/webui.cpp

@@ -0,0 +1,172 @@
+#include <Arduino.h>
+#include <ESPUI.h>
+
+uint16_t button1;
+uint16_t switchOne;
+uint16_t status;
+
+void initWebUI();
+
+void numberCall( Control* sender, int type ) {
+  Serial.println( sender->value );
+}
+
+void textCall( Control* sender, int type ) {
+  Serial.print("Text: ID: ");
+  Serial.print(sender->id);
+  Serial.print(", Value: ");
+  Serial.println( sender->value );}
+
+void slider( Control* sender, int type ) {
+  Serial.print("Slider: ID: ");
+  Serial.print(sender->id);
+  Serial.print(", Value: ");
+  Serial.println( sender->value );}
+
+void buttonCallback( Control* sender, int type ) {
+  switch ( type ) {
+    case B_DOWN:
+      Serial.println( "Button DOWN" );
+      break;
+
+    case B_UP:
+      Serial.println( "Button UP" );
+      break;
+  }
+}
+
+void buttonExample( Control* sender, int type ) {
+  switch ( type ) {
+    case B_DOWN:
+      Serial.println( "Status: Start" );
+      ESPUI.updateControlValue( status, "Start" );
+    
+      ESPUI.getControl( button1 )->color = ControlColor::Carrot;
+      ESPUI.updateControl( button1 );
+      break;
+
+    case B_UP:
+      Serial.println( "Status: Stop" );
+      ESPUI.updateControlValue( status, "Stop" );
+   
+      ESPUI.getControl( button1 )->color = ControlColor::Peterriver;
+      ESPUI.updateControl( button1 );
+      break;
+  }
+}
+
+void padExample( Control* sender, int value ) {
+  switch ( value ) {
+    case P_LEFT_DOWN:
+      Serial.print( "left down" );
+      break;
+
+    case P_LEFT_UP:
+      Serial.print( "left up" );
+      break;
+
+    case P_RIGHT_DOWN:
+      Serial.print( "right down" );
+      break;
+
+    case P_RIGHT_UP:
+      Serial.print( "right up" );
+      break;
+
+    case P_FOR_DOWN:
+      Serial.print( "for down" );
+      break;
+
+    case P_FOR_UP:
+      Serial.print( "for up" );
+      break;
+
+    case P_BACK_DOWN:
+      Serial.print( "back down" );
+      break;
+
+    case P_BACK_UP:
+      Serial.print( "back up" );
+      break;
+
+    case P_CENTER_DOWN:
+      Serial.print( "center down" );
+      break;
+
+    case P_CENTER_UP:
+      Serial.print( "center up" );
+      break;
+  }
+
+  Serial.print( " " );
+  Serial.println( sender->id );
+}
+
+void switchExample( Control* sender, int value ) {
+  switch ( value ) {
+    case S_ACTIVE:
+      Serial.print( "Active:" );
+      break;
+
+    case S_INACTIVE:
+      Serial.print( "Inactive" );
+      break;
+  }
+
+  Serial.print( " " );
+  Serial.println( sender->id );
+}
+
+void selectExample( Control* sender, int value ) {
+  Serial.print("Select: ID: ");
+  Serial.print(sender->id);
+  Serial.print(", Value: ");
+  Serial.println( sender->value );
+}
+
+void otherSwitchExample( Control* sender, int value ) {
+  switch ( value ) {
+    case S_ACTIVE:
+      Serial.print( "Active:" );
+      break;
+
+    case S_INACTIVE:
+      Serial.print( "Inactive" );
+      break;
+  }
+
+  Serial.print( " " );
+  Serial.println( sender->id );
+}
+
+void initWebUI (void){
+
+  uint16_t tab1 = ESPUI.addControl( ControlType::Tab, "Settings 1", "Settings 1" );
+  uint16_t tab2 = ESPUI.addControl( ControlType::Tab, "Settings 2", "Settings 2" );
+  uint16_t tab3 = ESPUI.addControl( ControlType::Tab, "Settings 3", "Settings 3" );
+
+  // shown above all tabs
+  status = ESPUI.addControl( ControlType::Label, "Status:", "Stop", ControlColor::Turquoise );
+
+  uint16_t select1 = ESPUI.addControl( ControlType::Select, "Select:", "", ControlColor::Alizarin, tab1, &selectExample );
+  ESPUI.addControl( ControlType::Option, "Option1", "Opt1", ControlColor::Alizarin, select1 );
+  ESPUI.addControl( ControlType::Option, "Option2", "Opt2", ControlColor::Alizarin, select1 );
+  ESPUI.addControl( ControlType::Option, "Option3", "Opt3", ControlColor::Alizarin, select1 );
+  
+  ESPUI.addControl( ControlType::Text, "Text Test:", "a Text Field", ControlColor::Alizarin, tab1, &textCall );
+
+  // tabbed controls
+  ESPUI.addControl( ControlType::Label, "Millis:", "0", ControlColor::Emerald, tab1 );
+  button1 = ESPUI.addControl( ControlType::Button, "Push Button", "Press", ControlColor::Peterriver, tab1, &buttonCallback );
+  ESPUI.addControl( ControlType::Button, "Other Button", "Press", ControlColor::Wetasphalt, tab1, &buttonExample );
+  ESPUI.addControl( ControlType::PadWithCenter, "Pad with center", "", ControlColor::Sunflower, tab2, &padExample );
+  ESPUI.addControl( ControlType::Pad, "Pad without center", "", ControlColor::Carrot, tab3, &padExample );
+  switchOne = ESPUI.addControl( ControlType::Switcher, "Switch one", "", ControlColor::Alizarin, tab3, &switchExample );
+  ESPUI.addControl( ControlType::Switcher, "Switch two", "", ControlColor::None, tab3, &otherSwitchExample );
+  ESPUI.addControl( ControlType::Slider, "Slider one", "30", ControlColor::Alizarin, tab1, &slider );
+  ESPUI.addControl( ControlType::Slider, "Slider two", "100", ControlColor::Alizarin, tab3, &slider );
+  ESPUI.addControl( ControlType::Number, "Number:", "50", ControlColor::Alizarin, tab3, &numberCall );
+
+  ESPUI.begin("ESPUI Control");
+}
+

Software/ChainLube/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

Software/ChainLube/wifi_credentials.example.ini

@@ -0,0 +1,5 @@
+[common]
+build_flags =
+  -DWIFI_SSID='"Wifi-SSID"'
+  -DWIFI_PASSWORD='"Wifi-Password"'
+  -DADMIN_PASS='"adminpass"'