souko/Kettenoeler
1
0
Fork 0
Code Issues Pull Requests Releases 4 Wiki Activity

Base Software System

Browse Source
This commit is contained in:
Marcel Peterkau
2022-01-07 21:02:27 +01:00
parent 79aa3cc1a5
commit 4bffdf932e
13 changed files with 999 additions and 449 deletions
Download Patch File Download Diff File Expand all files Collapse all files

27
Software/ChainLube/src/common.h Normal file
View File

@@ -0,0 +1,27 @@
#ifndef _COMMON_H_
#define _COMMON_H_
#define GPIO_BUTTON 14
#define GPIO_LED D6
#define GPIO_TRIGGER 2
#define GPIO_PUMP 0
#ifndef HOST_NAME
#define HOST_NAME "ChainLube_%06X" // Use printf-Formatting - Chip-ID (uin32_t) will be added
#endif
#ifndef OTA_DELAY
#define OTA_DELAY 50 // ticks -> 10ms / tick
#endif
#ifndef ADMIN_PASS
#error "You need to define ADMIN_PASS for OTA-Update"
#endif
#ifndef WIFI_PASSWORD
#error "You must define an WIFI_PASSWORD for OTA-Update"
#endif
#ifndef WIFI_SSID
#error "You must define an WIFI_SSID for OTA-Update"
#endif
#endif

164
Software/ChainLube/src/main.cpp Normal file
View File

@@ -0,0 +1,164 @@
#include <Arduino.h>
#include <Wire.h>
#include <U8g2lib.h>
#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>
#include <ESP8266mDNS.h>
#include <ArduinoOTA.h>
#include <RemoteDebug.h>
#include <FastLED.h>
#include "common.h"
#include "rmtdbghelp.h"
const char *ssid = WIFI_SSID;
const char *password = WIFI_PASSWORD;
#ifdef DEBUG
const bool debug_flag = true;
#else
const bool debug_flag = false;
#endif
bool startSetupMode = false;
char DeviceName[33];
U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(-1);
RemoteDebug Debug;
ESP8266WiFiMulti wifiMulti;
// Function-Prototypes
String IpAddress2String(const IPAddress &ipAddress);
void processCmdRemoteDebug();
void RemotDebug_printSystemInfo();
void RemoteDebug_printWifiInfo();
CRGB leds[1];
void setup()
{
system_update_cpu_freq(SYS_CPU_80MHZ);
snprintf(DeviceName, 32, HOST_NAME, ESP.getChipId());
WiFi.mode(WIFI_OFF);
WiFi.persistent(false);
Serial.begin(115200);
Serial.setDebugOutput(true);
Serial.println("Souko's ChainOiler Mk1");
Serial.println(DeviceName);
u8x8.begin();
u8x8.setFont(u8x8_font_chroma48medium8_r);
pinMode(GPIO_TRIGGER, INPUT_PULLUP);
pinMode(GPIO_BUTTON, INPUT_PULLUP);
pinMode(GPIO_PUMP, OUTPUT);
WiFi.mode(WIFI_STA);
WiFi.setHostname(DeviceName);
wifiMulti.addAP(WIFI_SSID, WIFI_PASSWORD);
Serial.println("Connecting Wifi...");
if (wifiMulti.run() == WL_CONNECTED)
{
Serial.println("");
Serial.println("WiFi connected");
Serial.println("IP address: ");
Serial.print(WiFi.localIP());
}
if (MDNS.begin(DeviceName))
MDNS.addService("telnet", "tcp", 23);
Debug.begin(DeviceName); // Initialize the WiFi server
Debug.setResetCmdEnabled(true); // Enable the reset command
Debug.showProfiler(true); // Profiler (Good to measure times, to optimize codes)
Debug.showColors(true); // Colors
Debug.setHelpProjectsCmds(helpCmd);
Debug.setCallBackProjectCmds(&processCmdRemoteDebug);
ArduinoOTA.setPort(8266);
ArduinoOTA.setHostname(DeviceName);
ArduinoOTA.setPassword(ADMIN_PASS);
ArduinoOTA.onStart([]()
{
u8x8.clearDisplay();
u8x8.drawString(0, 0, "OTA-Update");
u8x8.refreshDisplay(); });
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total)
{
static bool refreshed = false;
if (!refreshed)
{
u8x8.clearDisplay();
refreshed = true;
u8x8.drawString(0, 0, "OTA Upload");
}
uint32_t percent = progress / (total / 100);
u8x8.setCursor(0, 1);
u8x8.printf("%d %%", percent);
u8x8.refreshDisplay(); });
ArduinoOTA.onEnd([]()
{
u8x8.clearDisplay();
u8x8.drawString(0, 0, "OTA-Restart");
u8x8.refreshDisplay(); });
ArduinoOTA.begin();
u8x8.clearDisplay();
u8x8.drawString(4, 4, "Souko's");
u8x8.drawString(1, 5, "ChainLube Mk1");
u8x8.refreshDisplay();
FastLED.addLeds<WS2811, GPIO_LED, GRB>(leds, 1); // GRB ordering is assumed
}
void loop()
{
leds[0] = digitalRead(GPIO_BUTTON) ? CRGB::Green : CRGB::Red;
FastLED.show();
ArduinoOTA.handle();
Debug.handle();
yield();
}
String IpAddress2String(const IPAddress &ipAddress)
{
return String(ipAddress[0]) + String(".") +
String(ipAddress[1]) + String(".") +
String(ipAddress[2]) + String(".") +
String(ipAddress[3]);
}
void processCmdRemoteDebug()
{
String lastCmd = Debug.getLastCommand();
if (lastCmd == "sysinfo")
RemotDebug_printSystemInfo();
else if (lastCmd == "netinfo")
RemoteDebug_printWifiInfo();
}
void RemotDebug_printSystemInfo()
{
debugA("Souko's ChainOiler Mk1");
debugA("Hostname: %s", DeviceName);
debugA("Sdk version: %s", ESP.getSdkVersion());
debugA("Core Version: %s", ESP.getCoreVersion().c_str());
debugA("Boot Version: %u", ESP.getBootVersion());
debugA("Boot Mode: %u", ESP.getBootMode());
debugA("CPU Frequency: %u MHz", ESP.getCpuFreqMHz());
debugA("Reset reason: %s", ESP.getResetReason().c_str());
}
void RemoteDebug_printWifiInfo()
{
}

2
Software/ChainLube/src/rmtdbghelp.h Normal file
View File

@@ -0,0 +1,2 @@
const char helpCmd[] = "sysinfo - System Info\r\n"
"netinfo - WiFi Info\r\n";

172
Software/ChainLube/src/webui.cpp Normal file
View File

@@ -0,0 +1,172 @@
#include <Arduino.h>
#include <ESPUI.h>
uint16_t button1;
uint16_t switchOne;
uint16_t status;
void initWebUI();
void numberCall( Control* sender, int type ) {
Serial.println( sender->value );
}
void textCall( Control* sender, int type ) {
Serial.print("Text: ID: ");
Serial.print(sender->id);
Serial.print(", Value: ");
Serial.println( sender->value );}
void slider( Control* sender, int type ) {
Serial.print("Slider: ID: ");
Serial.print(sender->id);
Serial.print(", Value: ");
Serial.println( sender->value );}
void buttonCallback( Control* sender, int type ) {
switch ( type ) {
case B_DOWN:
Serial.println( "Button DOWN" );
break;
case B_UP:
Serial.println( "Button UP" );
break;
}
}
void buttonExample( Control* sender, int type ) {
switch ( type ) {
case B_DOWN:
Serial.println( "Status: Start" );
ESPUI.updateControlValue( status, "Start" );
ESPUI.getControl( button1 )->color = ControlColor::Carrot;
ESPUI.updateControl( button1 );
break;
case B_UP:
Serial.println( "Status: Stop" );
ESPUI.updateControlValue( status, "Stop" );
ESPUI.getControl( button1 )->color = ControlColor::Peterriver;
ESPUI.updateControl( button1 );
break;
}
}
void padExample( Control* sender, int value ) {
switch ( value ) {
case P_LEFT_DOWN:
Serial.print( "left down" );
break;
case P_LEFT_UP:
Serial.print( "left up" );
break;
case P_RIGHT_DOWN:
Serial.print( "right down" );
break;
case P_RIGHT_UP:
Serial.print( "right up" );
break;
case P_FOR_DOWN:
Serial.print( "for down" );
break;
case P_FOR_UP:
Serial.print( "for up" );
break;
case P_BACK_DOWN:
Serial.print( "back down" );
break;
case P_BACK_UP:
Serial.print( "back up" );
break;
case P_CENTER_DOWN:
Serial.print( "center down" );
break;
case P_CENTER_UP:
Serial.print( "center up" );
break;
}
Serial.print( " " );
Serial.println( sender->id );
}
void switchExample( Control* sender, int value ) {
switch ( value ) {
case S_ACTIVE:
Serial.print( "Active:" );
break;
case S_INACTIVE:
Serial.print( "Inactive" );
break;
}
Serial.print( " " );
Serial.println( sender->id );
}
void selectExample( Control* sender, int value ) {
Serial.print("Select: ID: ");
Serial.print(sender->id);
Serial.print(", Value: ");
Serial.println( sender->value );
}
void otherSwitchExample( Control* sender, int value ) {
switch ( value ) {
case S_ACTIVE:
Serial.print( "Active:" );
break;
case S_INACTIVE:
Serial.print( "Inactive" );
break;
}
Serial.print( " " );
Serial.println( sender->id );
}
void initWebUI (void){
uint16_t tab1 = ESPUI.addControl( ControlType::Tab, "Settings 1", "Settings 1" );
uint16_t tab2 = ESPUI.addControl( ControlType::Tab, "Settings 2", "Settings 2" );
uint16_t tab3 = ESPUI.addControl( ControlType::Tab, "Settings 3", "Settings 3" );
// shown above all tabs
status = ESPUI.addControl( ControlType::Label, "Status:", "Stop", ControlColor::Turquoise );
uint16_t select1 = ESPUI.addControl( ControlType::Select, "Select:", "", ControlColor::Alizarin, tab1, &selectExample );
ESPUI.addControl( ControlType::Option, "Option1", "Opt1", ControlColor::Alizarin, select1 );
ESPUI.addControl( ControlType::Option, "Option2", "Opt2", ControlColor::Alizarin, select1 );
ESPUI.addControl( ControlType::Option, "Option3", "Opt3", ControlColor::Alizarin, select1 );
ESPUI.addControl( ControlType::Text, "Text Test:", "a Text Field", ControlColor::Alizarin, tab1, &textCall );
// tabbed controls
ESPUI.addControl( ControlType::Label, "Millis:", "0", ControlColor::Emerald, tab1 );
button1 = ESPUI.addControl( ControlType::Button, "Push Button", "Press", ControlColor::Peterriver, tab1, &buttonCallback );
ESPUI.addControl( ControlType::Button, "Other Button", "Press", ControlColor::Wetasphalt, tab1, &buttonExample );
ESPUI.addControl( ControlType::PadWithCenter, "Pad with center", "", ControlColor::Sunflower, tab2, &padExample );
ESPUI.addControl( ControlType::Pad, "Pad without center", "", ControlColor::Carrot, tab3, &padExample );
switchOne = ESPUI.addControl( ControlType::Switcher, "Switch one", "", ControlColor::Alizarin, tab3, &switchExample );
ESPUI.addControl( ControlType::Switcher, "Switch two", "", ControlColor::None, tab3, &otherSwitchExample );
ESPUI.addControl( ControlType::Slider, "Slider one", "30", ControlColor::Alizarin, tab1, &slider );
ESPUI.addControl( ControlType::Slider, "Slider two", "100", ControlColor::Alizarin, tab3, &slider );
ESPUI.addControl( ControlType::Number, "Number:", "50", ControlColor::Alizarin, tab3, &numberCall );
ESPUI.begin("ESPUI Control");
}