Software/lib/EByte LoRa E220 library/LoRa_E220.cpp

@@ -274,7 +274,7 @@ bool LoRa_E220::begin(){
 
     this->serialDef.stream->setTimeout(100);
     Status status = setMode(MODE_0_NORMAL);
-    return status;
+    return status==E220_SUCCESS;
 }
 
 /*

Software/platformio.ini

@@ -26,14 +26,13 @@ upload_speed = 921600
 
 build_flags=
   !python git_rev_macro.py
-  -DATOMIC_FS_UPDATE
+  ;-DSERIAL_DEBUG
-  ;-DFEATURE_ENABLE_WIFI_CLIENT
+  ;-DWIFI_CLIENT
   ;-DCAPTIVE
   -DWIFI_AP_IP_GW=10,0,1,1
   -DADMIN_PASSWORD=${wifi_cred.admin_password}
   -DWIFI_SSID=${wifi_cred.wifi_ssid}
   -DWIFI_PASSWORD=${wifi_cred.wifi_password}
-  -DWIFI_AP_SSID=${wifi_cred.wifi_ap_ssid}
   -DWIFI_AP_PASSWORD=${wifi_cred.wifi_ap_password}
   -DDEVICE_NAME='"Dark Emergency Timer"'
   -DFACTION_1_NAME='"GOF"'

Software/src/common.h

@@ -13,7 +13,6 @@
 #define HOST_NAME "AirsoftTimer_%08X"
 
 #define SHUTDOWN_DELAY_MS 5000
-#define RESETABLE_AFTER_STARTUP_MS 30000
 
 #define GPIO_LORA_TX D3
 #define GPIO_LORA_RX D4
@@ -40,9 +39,6 @@
 #define I2C_POWER_ADDRESS 0x40
 #define I2C_EEPROM_ADDRESS 0x50
 
-#define SW_VERSION 1.0
-#define FLASH_FS_VERSION 1.0
-
 #ifndef OTA_DELAY
 #define OTA_DELAY 50 // ticks -> 10ms / tick
 #endif
@@ -56,10 +52,6 @@
 #ifndef WIFI_SSID
 #error "You must define an WIFI_SSID for OTA-Update"
 #endif
-#ifndef WIFI_AP_SSID
-#warning "No WIFI_AP_SSID defined. Using DeviceName"
-#define WIFI_AP_SSID DEVICE_NAME
-#endif
 #ifndef WIFI_AP_PASSWORD
 #error "You must define an WIFI_AP_PASSWORD for Standalone AP-Mode"
 #endif

Software/src/dtc.h

@@ -15,8 +15,6 @@ typedef enum DTCNums_e
   DTC_FLASHFS_ERROR,
   DTC_FLASHFS_VERSION_ERROR,
   DTC_EEPROM_CFG_SANITY,
-  DTC_NO_LORA_FOUND,
-  DTC_NO_BATMNON_FOUND,
   DTC_LAST_DTC
 } DTCNums_t;
 

Software/src/lora_net.cpp

@@ -5,62 +5,52 @@ LoRa_E220 e220ttl(GPIO_LORA_TX, GPIO_LORA_RX, GPIO_LORA_AUX, 3, 4); // Arduino R
 void printParameters(struct Configuration configuration);
 void printModuleInformation(struct ModuleInformation moduleInformation);
 
-bool InitLoRa(void (*MPinHelper)(int, int))
+void InitLoRa(void (*MPinHelper)(int, int))
 {
-    bool returnval;
-
     e220ttl.setMPins = MPinHelper;
-    returnval = e220ttl.begin();
+    e220ttl.begin();
 
-    if (returnval == true)
+    ResponseStructContainer c;
-    {
+    c = e220ttl.getConfiguration();
-        ResponseStructContainer c;
+    // It's important get configuration pointer before all other operation
-        c = e220ttl.getConfiguration();
+    Configuration configuration = *(Configuration *)c.data;
-        // It's important get configuration pointer before all other operation
+    Serial.println(c.status.getResponseDescription());
-        Configuration configuration = *(Configuration *)c.data;
+    Serial.println(c.status.code);
-        Serial.println(c.status.getResponseDescription());
-        Serial.println(c.status.code);
 
-        ResponseStructContainer cMi;
+    ResponseStructContainer cMi;
-        cMi = e220ttl.getModuleInformation();
+    cMi = e220ttl.getModuleInformation();
-        // It's important get information pointer before all other operation
+    // It's important get information pointer before all other operation
-        // ModuleInformation mi = *(ModuleInformation *)cMi.data;
+    // ModuleInformation mi = *(ModuleInformation *)cMi.data;
 
-        Serial.println(cMi.status.getResponseDescription());
+    Serial.println(cMi.status.getResponseDescription());
-        Serial.println(cMi.status.code);
+    Serial.println(cMi.status.code);
 
-        //	----------------------- DEFAULT TRANSPARENT WITH RSSI -----------------------
+    //	----------------------- DEFAULT TRANSPARENT WITH RSSI -----------------------
-        configuration.ADDL = 0x02;
+    configuration.ADDL = 0x02;
-        configuration.ADDH = 0x00;
+    configuration.ADDH = 0x00;
 
-        configuration.CHAN = 23;
+    configuration.CHAN = 23;
 
-        configuration.SPED.uartBaudRate = UART_BPS_9600;
+    configuration.SPED.uartBaudRate = UART_BPS_9600;
-        configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
+    configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
-        configuration.SPED.uartParity = MODE_00_8N1;
+    configuration.SPED.uartParity = MODE_00_8N1;
 
-        configuration.OPTION.subPacketSetting = SPS_200_00;
+    configuration.OPTION.subPacketSetting = SPS_200_00;
-        configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_ENABLED;
+    configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_ENABLED;
-        configuration.OPTION.transmissionPower = POWER_22;
+    configuration.OPTION.transmissionPower = POWER_22;
 
-        configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
+    configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
-        configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
+    configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
-        configuration.TRANSMISSION_MODE.enableLBT = LBT_ENABLED;
+    configuration.TRANSMISSION_MODE.enableLBT = LBT_ENABLED;
-        configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
+    configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
 
-        // Set configuration changed and set to not hold the configuration
+    // Set configuration changed and set to not hold the configuration
-        ResponseStatus rs = e220ttl.setConfiguration(configuration, WRITE_CFG_PWR_DWN_LOSE);
+    ResponseStatus rs = e220ttl.setConfiguration(configuration, WRITE_CFG_PWR_DWN_LOSE);
-        Serial.println(rs.getResponseDescription());
+    Serial.println(rs.getResponseDescription());
-        Serial.println(rs.code);
+    Serial.println(rs.code);
-        c.close();
+    c.close();
 
-        printParameters(configuration);
+    printParameters(configuration);
-    }
-    else
-    {
-        MaintainDTC(DTC_NO_LORA_FOUND, DTC_WARN, true);
-    }
-    return returnval;
 }
 
 void LoRa_Process()

Software/src/lora_net.h

@@ -14,7 +14,7 @@
 
 #define FREQUENCY_868
 
-bool InitLoRa(void (*MPinHelper)(int, int));
+void InitLoRa(void (*MPinHelper)(int, int));
 void LoRa_Process();
 void sendStatus_LoRa();
 

Software/src/main.cpp

@@ -22,14 +22,11 @@
 #ifdef WIFI_CLIENT
 #include <WiFiMulti.h>
 
-#ifdef FEATURE_ENABLE_WIFI_CLIENT
+const char *ssid = QUOTE(WIFI_SSID);
-#include <ESP8266WiFiMulti.h>
+const char *password = QUOTE(WIFI_PASSWORD);
-
-const char *ssid = QUOTE(WIFI_SSID_CLIENT);
-const char *password = QUOTE(WIFI_PASSWORD_CLIENT);
 const uint32_t connectTimeoutMs = 5000;
 
-ESP8266WiFiMulti wifiMulti;
+WiFiMulti wifiMulti;
 #endif
 
 PCF8574 i2c_io(I2C_IO_ADDRESS);
@@ -59,7 +56,7 @@ Ticker tmrInputGetter(tmrCallback_InputGetter, 250, 0, MILLIS);
 void tmrCallback_EEPROMCyclicPDS();
 Ticker tmrEEPROMCyclicPDS(tmrCallback_EEPROMCyclicPDS, 60000, 0, MILLIS);
 
-#ifdef FEATURE_ENABLE_WIFI_CLIENT
+#ifdef WIFI_CLIENT
 void tmrCallback_WiFiMaintainConnection();
 Ticker tmrWiFiMaintainConnection(tmrCallback_WiFiMaintainConnection, 1000, 0, MILLIS);
 #endif
@@ -120,22 +117,17 @@ void setup()
 		Serial.print("INA219 not Initialized\n");
 	}
 
-	if (InitLoRa(&setMPins_Helper))
+	InitLoRa(&setMPins_Helper);
-	{
+	tmrStatusSender.start();
-		Serial.printf("Initialized LoRa_Transceiver");
-		tmrStatusSender.start();
-	}
-	else
-	{
-		Serial.print("LoRa not Initialized\n");
-	}
 
-#ifdef FEATURE_ENABLE_WIFI_CLIENT
+#ifdef WIFI_CLIENT
 	WiFi.mode(WIFI_STA);
-	WiFi.setHostname(globals.DeviceName);
+	WiFi.setHostname(globals.DeviceName_ID);
-	wifiMulti.addAP(QUOTE(WIFI_SSID_CLIENT), QUOTE(WIFI_PASSWORD_CLIENT));
+	wifiMulti.addAP(QUOTE(WIFI_SSID), QUOTE(WIFI_PASSWORD));
-	WiFiMaintainConnectionTicker.start();
+	tmrWiFiMaintainConnection.start();
 #else
+	WiFi.mode(WIFI_AP);
+	WiFi.begin(QUOTE(DEVICE_NAME), QUOTE(WIFI_AP_PASSWORD));
 	WiFi.mode(WIFI_OFF);
 #endif
 
@@ -260,13 +252,13 @@ void SevenSeg_Output()
 			if (millis() % 3000 < 1500)
 				snprintf(sevenSegBuff, sizeof(sevenSegBuff), "%4d", globals.battery_level);
 			else
-				snprintf(sevenSegBuff, sizeof(sevenSegBuff), "%3d.%1d", (globals.loadvoltage_mV / 1000), ((globals.loadvoltage_mV % 1000) / 100));
+				snprintf(sevenSegBuff, sizeof(sevenSegBuff), "%2d.%1d", (globals.loadvoltage_mV / 1000), ((globals.loadvoltage_mV % 1000) / 100));
 
 			disp_FAC_1.setBrightness(1);
-			disp_FAC_1.display(" Bat");
+			disp_FAC_1.display(" BAT");
 
 			disp_FAC_2.setBrightness(1);
-			disp_FAC_2.display("low ");
+			disp_FAC_2.display("LOW ");
 
 			disp_FAC_3.setBrightness(1);
 			disp_FAC_3.display(String(sevenSegBuff));
@@ -428,38 +420,29 @@ void tmrCallback_WiFiMaintainConnection()
 	else
 	{
 		if (WiFiFailCount < WiFiFailMax)
-		{
 			WiFiFailCount++;
-		}
 		else
-		{
+			toggleWiFiAP(false);
-			debugV("WiFi not connected! - Start AP");
-			toggleWiFiAP();
-		}
 	}
 }
 #endif
 
 void toggleWiFiAP(boolean shutdown)
 {
-	if (WiFi.getMode() != WIFI_OFF)
+	if (WiFi.getMode() != WIFI_OFF && shutdown == true)
 	{
 		WiFi.mode(WIFI_OFF);
-		debugV("WiFi turned off");
+#ifdef WIFI_CLIENT
-#ifdef FEATURE_ENABLE_WIFI_CLIENT
+		tmrWiFiMaintainConnection.stop();
-		WiFiMaintainConnectionTicker.stop();
 #endif
 	}
-	else
+	else if (shutdown == false)
 	{
 		WiFi.mode(WIFI_AP);
 		WiFi.softAPConfig(IPAddress(WIFI_AP_IP_GW), IPAddress(WIFI_AP_IP_GW), IPAddress(255, 255, 255, 0));
-		WiFi.softAP(QUOTE(WIFI_AP_SSID), QUOTE(WIFI_AP_PASSWORD));
+		WiFi.softAP(globals.DeviceName_ID, QUOTE(WIFI_AP_PASSWORD));
-#ifdef FEATURE_ENABLE_WIFI_CLIENT
+#ifdef WIFI_CLIENT
-		WiFiMaintainConnectionTicker.stop();
+		tmrWiFiMaintainConnection.stop();
-		debugV("WiFi AP started, stopped Maintain-Timer");
-#else
-		debugV("WiFi AP started");
 #endif
 	}
 }
@@ -506,14 +489,24 @@ void ProcessKeyCombos(bool *btnState)
 	} keyStatus_t;
 
 	static keyStatus_t keyStatus_Fac1 = KEY_RELEASED;
+	static uint8_t keyCount_Fac1 = 0;
 	static keyStatus_t keyStatus_Fac2 = KEY_RELEASED;
 	static uint8_t keyCount_Fac2 = 0;
 	static keyStatus_t keyStatus_Fac3 = KEY_RELEASED;
-	static uint8_t keyCount_Fac3 = 0;
 
-	if (btnState[0] == FAC_1_TRG_PRESSED)
+	if (btnState[2] == FAC_3_TRG_PRESSED)
 	{
-		keyStatus_Fac1 = KEY_PRESSED;
+		keyStatus_Fac3 = KEY_PRESSED;
+
+		// Process FactionKey 1 ComboCounter
+		if (btnState[0] == FAC_1_TRG_PRESSED && keyStatus_Fac1 == KEY_RELEASED)
+		{
+			keyStatus_Fac1 = KEY_PRESSED;
+			keyCount_Fac1++;
+		}
+
+		if (btnState[0] != FAC_1_TRG_PRESSED)
+			keyStatus_Fac1 = KEY_RELEASED;
 
 		// Process FactionKey 2 ComboCounter
 		if (btnState[1] == FAC_2_TRG_PRESSED && keyStatus_Fac2 == KEY_RELEASED)
@@ -524,50 +517,22 @@ void ProcessKeyCombos(bool *btnState)
 
 		if (btnState[1] != FAC_2_TRG_PRESSED)
 			keyStatus_Fac2 = KEY_RELEASED;
-
-		// Process FactionKey 3 ComboCounter
-		if (btnState[2] == FAC_3_TRG_PRESSED && keyStatus_Fac3 == KEY_RELEASED)
-		{
-			keyStatus_Fac3 = KEY_PRESSED;
-			keyCount_Fac3++;
-		}
-
-		if (btnState[2] != FAC_3_TRG_PRESSED)
-			keyStatus_Fac3 = KEY_RELEASED;
 	}
 
-	if (btnState[0] != FAC_1_TRG_PRESSED && keyStatus_Fac1 == KEY_PRESSED)
+	if (btnState[2] != FAC_3_TRG_PRESSED && keyStatus_Fac3 == KEY_PRESSED)
 	{
-		if (keyCount_Fac2 > 0 || keyCount_Fac3 > 0)
+		if (keyCount_Fac1 > 0 || keyCount_Fac2 > 0)
-			Serial.printf("KeyCombo 2: %d | 3: %d\n", keyCount_Fac2, keyCount_Fac3);
+			Serial.printf("KeyCombo 1: %d | 2: %d\n", keyCount_Fac1, keyCount_Fac2);
 
-		if (keyCount_Fac2 == 2 && keyCount_Fac3 == 0)
+		if (keyCount_Fac1 == 2 && keyCount_Fac2 == 2)
 		{
 			Serial.println("KeyCombo: WiFi AP ON");
 			OverrideDisplay("NET ", 5000);
 			toggleWiFiAP(false);
 		}
-		else if (keyCount_Fac2 == 4 && keyCount_Fac3 == 0)
-		{
-			Serial.printf("KeyCombo: Reset Timer\n");
-			if (millis() < RESETABLE_AFTER_STARTUP_MS)
-			{
-				OverrideDisplay("RST ", 5000);
-				PersistenceData.faction_1_timer = 0;
-				PersistenceData.faction_2_timer = 0;
-				PersistenceData.faction_3_timer = 0;
-				PersistenceData.activeFaction = NONE;
-				globals.requestEEAction = EE_PDS_SAVE;
-			}
-			else
-			{
-				OverrideDisplay("ERR ", 5000);
-				Serial.printf("ERROR: only %d seconds after Startup!\n", RESETABLE_AFTER_STARTUP_MS / 1000);
-			}
-		}
 
+		keyCount_Fac1 = 0;
 		keyCount_Fac2 = 0;
-		keyCount_Fac3 = 0;
 		keyStatus_Fac1 = KEY_RELEASED;
 		keyStatus_Fac2 = KEY_RELEASED;
 		keyStatus_Fac3 = KEY_RELEASED;

Software/wifi_credentials.example.ini

@@ -1,5 +1,4 @@
 [wifi_cred]
-wifi_ap_ssid = wifi-ap-ssid
 wifi_ap_password = wifiappass
 wifi_ssid = wifi-ssid
 wifi_password = wifi-pass