updated FW Version Number

Software/data_src/version

@@ -1 +1 @@
-1.02
+1.04

Software/include/globals.h

@@ -45,6 +45,7 @@ typedef struct Globals_s
   bool hasDTC;
   int loadvoltage_mV = 0;
   int battery_level = 0;
+  bool timer_disabled = false;
 } Globals_t;
 
 extern Globals_t globals;
@@ -58,8 +59,8 @@ typedef struct Constants_s
 } Constants_t;
 
 const Constants_t constants PROGMEM = {
- 1,2,     // Firmware_Version
- 1,2,     // Required Flash Version
+ 1,5,     // Firmware_Version
+ 1,4,     // Required Flash Version
  GIT_REV  // Git-Hash-String
 };
 

Software/include/lora_net.h

@@ -2,10 +2,16 @@
 #define _LORA_NET_H_
 
 #include <Arduino.h>
+
+#ifdef LORA_FEATURE_ENABLED
 #include <LoRa_E220.h>
+#elif defined(FEATURE_ENABLE_UARTLORA)
+#include <SoftwareSerial.h>
+#endif
 
 // local includes
 #include "lora_messages.h"
+#include "debugger.h"
 #include "defaults.h"
 #include "config.h"
 #include "globals.h"

Software/include/sanitycheck.h

@@ -14,6 +14,9 @@
     #error "You must define an WIFI_AP_PASSWORD for Standalone AP-Mode"
 #endif
 
+#if defined(FEATURE_ENABLE_UARTLORA) && defined(FEATURE_ENABLE_LORA)
+    #error "You cannot enable LoRa and UART-Protocol at the same time!"
+#endif
 
 #ifdef FEATURE_ENABLE_WIFI_CLIENT
     #ifndef WIFI_CLIENT_PASSWORD

Software/platformio.ini

@@ -22,7 +22,7 @@ upload_speed = 921600
 ;upload_port = 10.0.1.48
 ;upload_protocol = espota
 ;upload_flags =  
-;   --auth=${wifi_cred.admin_password}
+;   --auth=${wifi_cred.ota_password}
 
 build_flags=
   !python git_rev_macro.py
@@ -30,8 +30,9 @@ build_flags=
   ;-DFEATURE_ENABLE_WIFI_CLIENT
   ;-DFEATURE_ENABLE_LORA
   ;-DCAPTIVE
+  -DFEATURE_ENABLE_UARTLORA
   -DWIFI_AP_IP_GW=10,0,0,1
-  -DADMIN_PASSWORD=${wifi_cred.admin_password}
+  -DADMIN_PASSWORD=${wifi_cred.ota_password}
   -DWIFI_CLIENT_SSID=${wifi_cred.wifi_client_ssid}
   -DWIFI_CLIENT_PASSWORD=${wifi_cred.wifi_client_password}
   -DWIFI_AP_SSID=${wifi_cred.wifi_ap_ssid}

Software/src/lora_net.cpp

@@ -1,13 +1,19 @@
 #include "lora_net.h"
 
+#ifdef FEATURE_ENABLE_LORA
 LoRa_E220 e220ttl(GPIO_LORA_TX, GPIO_LORA_RX, GPIO_LORA_AUX, 3, 4); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
-
 void printParameters(struct Configuration configuration);
 void printModuleInformation(struct ModuleInformation moduleInformation);
+#elif defined(FEATURE_ENABLE_UARTLORA)
+SoftwareSerial SerialLoRa(GPIO_LORA_RX, GPIO_LORA_TX); // RX, TX
+void Parse_LoRa_UartCommand(char input[], int size);
+#endif
 
 bool InitLoRa(void (*MPinHelper)(int, int))
 {
-    bool returnval;
+    bool returnval = false;
+
+#ifdef FEATURE_ENABLE_LORA
 
     e220ttl.setMPins = MPinHelper;
     returnval = e220ttl.begin();
@@ -60,11 +66,16 @@ bool InitLoRa(void (*MPinHelper)(int, int))
     {
         MaintainDTC(DTC_NO_LORA_FOUND, DTC_WARN, true);
     }
+#elif defined(FEATURE_ENABLE_UARTLORA)
+    SerialLoRa.begin(9600);
+    returnval = true;
+#endif
     return returnval;
 }
 
 void LoRa_Process()
 {
+#ifdef FEATURE_ENABLE_LORA
     if (e220ttl.available() > 1)
     {
         ResponseContainer rc = e220ttl.receiveMessageRSSI();
@@ -82,10 +93,45 @@ void LoRa_Process()
             Serial.println(rc.rssi, DEC);
         }
     }
+#elif defined(FEATURE_ENABLE_UARTLORA)
+
+    static char packageInput[32];
+    static bool packageRecieved = false;
+    static unsigned int bufferPtr = 0;
+    int recievedSize = 0;
+
+    while (SerialLoRa.available() && packageRecieved == false)
+    {
+        if (bufferPtr < sizeof(packageInput) - 1)
+        {
+            packageInput[bufferPtr] = SerialLoRa.read();
+            packageInput[bufferPtr + 1] = 0; // always terminate String
+
+            if (packageInput[bufferPtr] == '\n')
+            {
+                packageRecieved = true;
+                recievedSize = bufferPtr;
+                bufferPtr = 0;
+                Debug_pushMessage("Got LoRa UART: %s\n", packageInput);
+            }
+            else if ((packageInput[bufferPtr] >= 0x30) || (packageInput[bufferPtr] <= 0x5A)) // only accept Numbers, UpperCase-Letters and some special chars
+            {
+                bufferPtr++;
+            }
+        }
+    }
+
+    if (packageRecieved) {
+        Parse_LoRa_UartCommand(packageInput, recievedSize);
+        packageRecieved = false;
+    }
+
+#endif
 }
 
 void sendStatus_LoRa()
 {
+#ifdef FEATURE_ENABLE_LORA
     struct
     {
         MessageType_t type = "STATUS";
@@ -101,8 +147,25 @@ void sendStatus_LoRa()
 
     ResponseStatus rs = e220ttl.sendFixedMessage(0xFF, 0xFF, 23, (byte *)&sendStatus, sizeof(sendStatus));
     Serial.println(rs.getResponseDescription());
+
+#elif defined(FEATURE_ENABLE_UARTLORA)
+
+    SerialLoRa.print(PersistenceData.faction_1_timer);
+    SerialLoRa.write(";");
+    SerialLoRa.print(PersistenceData.faction_2_timer);
+    SerialLoRa.write(";");
+    SerialLoRa.print(PersistenceData.faction_3_timer);
+    SerialLoRa.write(";");
+    SerialLoRa.print(PersistenceData.activeFaction);
+    SerialLoRa.write(";");
+    SerialLoRa.print(globals.battery_level);
+    SerialLoRa.write('\n');
+
+#endif
 }
 
+#ifdef FEATURE_ENABLE_LORA
+
 void printParameters(struct Configuration configuration)
 {
     Serial.println("----------------------------------------");
@@ -169,3 +232,91 @@ void printParameters(struct Configuration configuration)
 
     Serial.println("----------------------------------------");
 }
+#endif
+
+#ifdef FEATURE_ENABLE_UARTLORA
+void Parse_LoRa_UartCommand(char input[], int size)
+{
+
+    Debug_pushMessage("Start parsing, size: %d", size);
+    char delimiter[] = ";";
+    char *ptr;
+    char command[8];
+    char value[8];
+
+    ptr = strtok(input, delimiter);
+
+    ptr = strtok(input, delimiter);
+
+    while (ptr != NULL)
+    {
+        strncpy(command, ptr, sizeof(command) - 1); // Platz für Nullterminator lassen
+        command[sizeof(command) - 1] = '\0'; // Nullterminator setzen
+
+        ptr = strtok(NULL, delimiter);
+
+        if (ptr != NULL)
+        {
+            strncpy(value, ptr, sizeof(value) - 1); // Platz für Nullterminator lassen
+            value[sizeof(value) - 1] = '\0'; // Nullterminator setzen
+        }
+        else
+        {
+            // Wenn ptr NULL ist, setze value auf leeren String
+            value[0] = '\0';
+        }
+
+        // Hier kannst du den Wert und das Kommando verarbeiten
+        Debug_pushMessage("Command: %s, Value: %s", command, value);
+    }
+
+    Debug_pushMessage("Parsed LoRa UART Command:  %s Value: %s\n", command, value);
+
+    if (!strcmp(command, "ENABLE"))
+    {
+        globals.timer_disabled = false;
+        Debug_pushMessage("Enabled by LoRa");
+    }
+    else if (!strcmp(command, "DISABLE"))
+    {
+        globals.timer_disabled = true;
+        Debug_pushMessage("Disabled by LoRa");
+    }
+    else if (!strcmp(command, "RESET"))
+    {
+        PersistenceData.activeFaction = NONE;
+        PersistenceData.faction_1_timer = 0;
+        PersistenceData.faction_2_timer = 0;
+        PersistenceData.faction_3_timer = 0;
+        Debug_pushMessage("Reset by LoRa");
+    }
+    else if (!strcmp(command, "TMRSTP"))
+    {
+        PersistenceData.activeFaction = NONE;
+    }
+    else if (!strcmp(command, "TMR1"))
+    {
+        PersistenceData.faction_1_timer = atol(value);
+    }
+    else if (!strcmp(command, "TMR2"))
+    {
+        PersistenceData.faction_2_timer = atol(value);
+    }
+    else if (!strcmp(command, "TMR3"))
+    {
+        PersistenceData.faction_3_timer = atol(value);
+    }
+    else if (!strcmp(command, "EFAC1"))
+    {
+        PersistenceData.activeFaction = FACTION_1;
+    }
+    else if (!strcmp(command, "EFAC2"))
+    {
+        PersistenceData.activeFaction = FACTION_2;
+    }
+    else if (!strcmp(command, "EFAC3"))
+    {
+        PersistenceData.activeFaction = FACTION_3;
+    }
+}
+#endif

Software/src/main.cpp

@@ -19,7 +19,7 @@
 #include "globals.h"
 #include "dtc.h"
 #include "debugger.h"
-#ifdef FEATURE_ENABLE_LORA
+#if defined(FEATURE_ENABLE_LORA) || defined(FEATURE_ENABLE_UARTLORA)
 #include "lora_net.h"
 #endif
 
@@ -49,7 +49,7 @@ void OverrideDisplay(uint32_t time, const char *message1, const char *message2,
 void initGlobals();
 void maintainSysStat();
 
-#ifdef FEATURE_ENABLE_LORA
+#if defined(FEATURE_ENABLE_UARTLORA) || defined(FEATURE_ENABLE_LORA)
 void setMPins_Helper(int pin, int status);
 void tmrCallback_StatusSender();
 Ticker tmrStatusSender(tmrCallback_StatusSender, 30000, 0, MILLIS);
@@ -72,7 +72,7 @@ Ticker tmrWiFiMaintainConnection(tmrCallback_WiFiMaintainConnection, 1000, 0, MI
 uint32_t DisplayOverrideFlag = 0;
 char DisplayOverrideValue[3][5] = {0};
 
-#ifdef FEATURE_ENABLE_LORA
+#if defined(FEATURE_ENABLE_UARTLORA) || defined(FEATURE_ENABLE_LORA)
 void setMPins_Helper(int pin, int status)
 {
 	i2c_io.write(pin, status);
@@ -119,7 +119,7 @@ void setup()
 		Serial.print("INA219 not Initialized\n");
 	}
 
-#ifdef FEATURE_ENABLE_LORA
+#if defined(FEATURE_ENABLE_UARTLORA) || defined(FEATURE_ENABLE_LORA)
 	if (InitLoRa(&setMPins_Helper))
 	{
 		Serial.print("Initialized LoRa_Transceiver\n");
@@ -229,9 +229,9 @@ void loop()
 	DTC_Process();
 	Debug_Process();
 
-#ifdef FEATURE_ENABLE_LORA
-	tmrStatusSender.update();
+#if defined(FEATURE_ENABLE_LORA) || defined(FEATURE_ENABLE_UARTLORA)
 	LoRa_Process();
+	tmrStatusSender.update();
 #endif
 
 #ifdef CAPTIVE
@@ -308,6 +308,9 @@ void SevenSeg_Output()
 
 void tmrCallback_FactionTicker()
 {
+	if (globals.timer_disabled == true)
+		PersistenceData.activeFaction = NONE;
+
 	switch (PersistenceData.activeFaction)
 	{
 	case FACTION_1:
@@ -349,7 +352,7 @@ void tmrCallback_InputGetter()
 		return;
 	}
 
-	if (btnState[0] == FAC_1_TRG_PRESSED)
+	if (btnState[0] == FAC_1_TRG_PRESSED && globals.timer_disabled != true)
 	{
 		if (PersistenceData.activeFaction != FACTION_1)
 		{
@@ -359,7 +362,7 @@ void tmrCallback_InputGetter()
 		PersistenceData.activeFaction = FACTION_1;
 	}
 
-	if (btnState[1] == FAC_2_TRG_PRESSED)
+	if (btnState[1] == FAC_2_TRG_PRESSED && globals.timer_disabled != true)
 	{
 		if (PersistenceData.activeFaction != FACTION_2)
 		{
@@ -369,7 +372,7 @@ void tmrCallback_InputGetter()
 		PersistenceData.activeFaction = FACTION_2;
 	}
 
-	if (btnState[2] == FAC_3_TRG_PRESSED)
+	if (btnState[2] == FAC_3_TRG_PRESSED && globals.timer_disabled != true)
 	{
 		if (PersistenceData.activeFaction != FACTION_3)
 		{
@@ -380,7 +383,7 @@ void tmrCallback_InputGetter()
 	}
 }
 
-#ifdef FEATURE_ENABLE_LORA
+#if defined(FEATURE_ENABLE_LORA) || defined(FEATURE_ENABLE_UARTLORA)
 void tmrCallback_StatusSender()
 {
 	sendStatus_LoRa();

Software/wifi_credentials.example.ini

@@ -1,6 +1,6 @@
 [wifi_cred]
 wifi_ap_ssid = wifi-ap-ssid
 wifi_ap_password = wifiappass
-wifi_ssid = wifi-ssid
-wifi_password = wifi-pass
-admin_password = ota-password
+wifi_client_ssid = wifi-ssid
+wifi_client_password = wifi-pass
+ota_password = ota-password