Airsoft/DarkEmergency-Timer
1
0
Fork 0
Code Issues Pull Requests Releases 9 Wiki Activity

migrated lot of stuff from Chainoiler-Project

Browse Source
This commit is contained in:
Marcel Peterkau
2023-02-20 13:51:54 +01:00
parent 8884e995ca
commit ae29e23812
11 changed files with 546 additions and 301 deletions
Download Patch File Download Diff File Expand all files Collapse all files

161
Software/src/lora_net.cpp Normal file
View File

@@ -0,0 +1,161 @@
#include "lora_net.h"
LoRa_E220 e220ttl(GPIO_LORA_TX, GPIO_LORA_RX, GPIO_LORA_AUX, 3, 4); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
void printParameters(struct Configuration configuration);
void printModuleInformation(struct ModuleInformation moduleInformation);
void InitLoRa(void (*MPinHelper)(int, int))
{
e220ttl.setMPins = MPinHelper;
e220ttl.begin();
ResponseStructContainer c;
c = e220ttl.getConfiguration();
// It's important get configuration pointer before all other operation
Configuration configuration = *(Configuration *)c.data;
Serial.println(c.status.getResponseDescription());
Serial.println(c.status.code);
ResponseStructContainer cMi;
cMi = e220ttl.getModuleInformation();
// It's important get information pointer before all other operation
// ModuleInformation mi = *(ModuleInformation *)cMi.data;
Serial.println(cMi.status.getResponseDescription());
Serial.println(cMi.status.code);
// ----------------------- DEFAULT TRANSPARENT WITH RSSI -----------------------
configuration.ADDL = 0x02;
configuration.ADDH = 0x00;
configuration.CHAN = 23;
configuration.SPED.uartBaudRate = UART_BPS_9600;
configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
configuration.SPED.uartParity = MODE_00_8N1;
configuration.OPTION.subPacketSetting = SPS_200_00;
configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_ENABLED;
configuration.OPTION.transmissionPower = POWER_22;
configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
configuration.TRANSMISSION_MODE.enableLBT = LBT_ENABLED;
configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// Set configuration changed and set to not hold the configuration
ResponseStatus rs = e220ttl.setConfiguration(configuration, WRITE_CFG_PWR_DWN_LOSE);
Serial.println(rs.getResponseDescription());
Serial.println(rs.code);
c.close();
printParameters(configuration);
}
void LoRa_Process()
{
if (e220ttl.available() > 1)
{
ResponseContainer rc = e220ttl.receiveMessageRSSI();
// Is something goes wrong print error
if (rc.status.code != 1)
{
Serial.println(rc.status.getResponseDescription());
}
else
{
// Print the data received
Serial.println(rc.status.getResponseDescription());
Serial.println(rc.data);
Serial.print("RSSI: ");
Serial.println(rc.rssi, DEC);
}
}
}
void sendStatus_LoRa()
{
struct
{
MessageType_t type = "STATUS";
MessageStatus_t status;
} __attribute__((packed)) sendStatus;
sendStatus.status.nodeid = 0x0002;
sendStatus.status.millis = millis();
sendStatus.status.faction_active = 1;
sendStatus.status.faction_1_timer = 0xBBBBBBBB;
sendStatus.status.faction_2_timer = 0xCCCCCCCC;
sendStatus.status.faction_3_timer = 0xDDDDDDDD;
ResponseStatus rs = e220ttl.sendFixedMessage(0xFF, 0xFF, 23, (byte *)&sendStatus, sizeof(sendStatus));
Serial.println(rs.getResponseDescription());
}
void printParameters(struct Configuration configuration)
{
Serial.println("----------------------------------------");
Serial.print(F("HEAD : "));
Serial.print(configuration.COMMAND, HEX);
Serial.print(" ");
Serial.print(configuration.STARTING_ADDRESS, HEX);
Serial.print(" ");
Serial.println(configuration.LENGHT, HEX);
Serial.println(F(" "));
Serial.print(F("AddH : "));
Serial.println(configuration.ADDH, HEX);
Serial.print(F("AddL : "));
Serial.println(configuration.ADDL, HEX);
Serial.println(F(" "));
Serial.print(F("Chan : "));
Serial.print(configuration.CHAN, DEC);
Serial.print(" -> ");
Serial.println(configuration.getChannelDescription());
Serial.println(F(" "));
Serial.print(F("SpeedParityBit : "));
Serial.print(configuration.SPED.uartParity, BIN);
Serial.print(" -> ");
Serial.println(configuration.SPED.getUARTParityDescription());
Serial.print(F("SpeedUARTDatte : "));
Serial.print(configuration.SPED.uartBaudRate, BIN);
Serial.print(" -> ");
Serial.println(configuration.SPED.getUARTBaudRateDescription());
Serial.print(F("SpeedAirDataRate : "));
Serial.print(configuration.SPED.airDataRate, BIN);
Serial.print(" -> ");
Serial.println(configuration.SPED.getAirDataRateDescription());
Serial.println(F(" "));
Serial.print(F("OptionSubPacketSett: "));
Serial.print(configuration.OPTION.subPacketSetting, BIN);
Serial.print(" -> ");
Serial.println(configuration.OPTION.getSubPacketSetting());
Serial.print(F("OptionTranPower : "));
Serial.print(configuration.OPTION.transmissionPower, BIN);
Serial.print(" -> ");
Serial.println(configuration.OPTION.getTransmissionPowerDescription());
Serial.print(F("OptionRSSIAmbientNo: "));
Serial.print(configuration.OPTION.RSSIAmbientNoise, BIN);
Serial.print(" -> ");
Serial.println(configuration.OPTION.getRSSIAmbientNoiseEnable());
Serial.println(F(" "));
Serial.print(F("TransModeWORPeriod : "));
Serial.print(configuration.TRANSMISSION_MODE.WORPeriod, BIN);
Serial.print(" -> ");
Serial.println(configuration.TRANSMISSION_MODE.getWORPeriodByParamsDescription());
Serial.print(F("TransModeEnableLBT : "));
Serial.print(configuration.TRANSMISSION_MODE.enableLBT, BIN);
Serial.print(" -> ");
Serial.println(configuration.TRANSMISSION_MODE.getLBTEnableByteDescription());
Serial.print(F("TransModeEnableRSSI: "));
Serial.print(configuration.TRANSMISSION_MODE.enableRSSI, BIN);
Serial.print(" -> ");
Serial.println(configuration.TRANSMISSION_MODE.getRSSIEnableByteDescription());
Serial.print(F("TransModeFixedTrans: "));
Serial.print(configuration.TRANSMISSION_MODE.fixedTransmission, BIN);
Serial.print(" -> ");
Serial.println(configuration.TRANSMISSION_MODE.getFixedTransmissionDescription());
Serial.println("----------------------------------------");
}