Airsoft/DarkEmergency-Timer
1
0
Fork 0
Code Issues Pull Requests Releases 9 Wiki Activity

Some LoRa-stuff

Browse Source
This commit is contained in:
Marcel Peterkau
2023-04-12 22:47:17 +02:00
parent 53928a93b0
commit 4d0a9918ce
4 changed files with 48 additions and 36 deletions
Download Patch File Download Diff File Expand all files Collapse all files

78
Software/src/lora_net.cpp
View File

@@ -5,52 +5,62 @@ LoRa_E220 e220ttl(GPIO_LORA_TX, GPIO_LORA_RX, GPIO_LORA_AUX, 3, 4); // Arduino R
void printParameters(struct Configuration configuration);
void printModuleInformation(struct ModuleInformation moduleInformation);
void InitLoRa(void (*MPinHelper)(int, int))
bool InitLoRa(void (*MPinHelper)(int, int))
{
bool returnval;
e220ttl.setMPins = MPinHelper;
e220ttl.begin();
returnval = e220ttl.begin();
ResponseStructContainer c;
c = e220ttl.getConfiguration();
// It's important get configuration pointer before all other operation
Configuration configuration = *(Configuration *)c.data;
Serial.println(c.status.getResponseDescription());
Serial.println(c.status.code);
if (returnval == true)
{
ResponseStructContainer c;
c = e220ttl.getConfiguration();
// It's important get configuration pointer before all other operation
Configuration configuration = *(Configuration *)c.data;
Serial.println(c.status.getResponseDescription());
Serial.println(c.status.code);
ResponseStructContainer cMi;
cMi = e220ttl.getModuleInformation();
// It's important get information pointer before all other operation
// ModuleInformation mi = *(ModuleInformation *)cMi.data;
ResponseStructContainer cMi;
cMi = e220ttl.getModuleInformation();
// It's important get information pointer before all other operation
// ModuleInformation mi = *(ModuleInformation *)cMi.data;
Serial.println(cMi.status.getResponseDescription());
Serial.println(cMi.status.code);
Serial.println(cMi.status.getResponseDescription());
Serial.println(cMi.status.code);
// ----------------------- DEFAULT TRANSPARENT WITH RSSI -----------------------
configuration.ADDL = 0x02;
configuration.ADDH = 0x00;
// ----------------------- DEFAULT TRANSPARENT WITH RSSI -----------------------
configuration.ADDL = 0x02;
configuration.ADDH = 0x00;
configuration.CHAN = 23;
configuration.CHAN = 23;
configuration.SPED.uartBaudRate = UART_BPS_9600;
configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
configuration.SPED.uartParity = MODE_00_8N1;
configuration.SPED.uartBaudRate = UART_BPS_9600;
configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
configuration.SPED.uartParity = MODE_00_8N1;
configuration.OPTION.subPacketSetting = SPS_200_00;
configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_ENABLED;
configuration.OPTION.transmissionPower = POWER_22;
configuration.OPTION.subPacketSetting = SPS_200_00;
configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_ENABLED;
configuration.OPTION.transmissionPower = POWER_22;
configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
configuration.TRANSMISSION_MODE.enableLBT = LBT_ENABLED;
configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
configuration.TRANSMISSION_MODE.enableLBT = LBT_ENABLED;
configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// Set configuration changed and set to not hold the configuration
ResponseStatus rs = e220ttl.setConfiguration(configuration, WRITE_CFG_PWR_DWN_LOSE);
Serial.println(rs.getResponseDescription());
Serial.println(rs.code);
c.close();
// Set configuration changed and set to not hold the configuration
ResponseStatus rs = e220ttl.setConfiguration(configuration, WRITE_CFG_PWR_DWN_LOSE);
Serial.println(rs.getResponseDescription());
Serial.println(rs.code);
c.close();
printParameters(configuration);
printParameters(configuration);
}
else
{
MaintainDTC(DTC_NO_LORA_FOUND, DTC_WARN, true);
}
return returnval;
}
void LoRa_Process()