Airsoft/DarkEmergency-Timer
1
0
Fork 0
Code Issues Pull Requests Releases 10 Wiki Activity

Updated to hiabuto.net Faction Timer PCB V1.0

Browse Source
This commit is contained in:
Marcel Peterkau
2023-02-13 22:59:42 +01:00
parent 0b95cff140
commit 3ee276c189
31 changed files with 5807 additions and 518 deletions
Download Patch File Download Diff File Expand all files Collapse all files

417
Software/lib/EByte LoRa E220 library/examples/01_setConfiguration/01_setConfiguration.ino Normal file
View File

@@ -0,0 +1,417 @@
/*
* LoRa E220
* Set configuration.
*
* You must uncommend the correct constructor.
*
* by Renzo Mischianti <https://www.mischianti.org>
*
* https://www.mischianti.org
*
* E220 ----- WeMos D1 mini ----- esp32 ----- Arduino Nano 33 IoT ----- Arduino MKR ----- Raspberry Pi Pico ----- stm32 ----- ArduinoUNO
* M0 ----- D7 (or 3.3v) ----- 19 (or 3.3v) ----- 4 (or 3.3v) ----- 2 (or 3.3v) ----- 10 (or 3.3v) ----- PB0 (or 3.3v) ----- 7 Volt div (or 3.3v)
* M1 ----- D6 (or 3.3v) ----- 21 (or 3.3v) ----- 6 (or 3.3v) ----- 4 (or 3.3v) ----- 11 (or 3.3v) ----- PB10 (or 3.3v) ----- 6 Volt div (or 3.3v)
* TX ----- D3 (PullUP) ----- TX2 (PullUP) ----- TX1 (PullUP) ----- 14 (PullUP) ----- 8 (PullUP) ----- PA2 TX2 (PullUP) ----- 4 (PullUP)
* RX ----- D4 (PullUP) ----- RX2 (PullUP) ----- RX1 (PullUP) ----- 13 (PullUP) ----- 9 (PullUP) ----- PA3 RX2 (PullUP) ----- 5 Volt div (PullUP)
* AUX ----- D5 (PullUP) ----- 18 (PullUP) ----- 2 (PullUP) ----- 0 (PullUP) ----- 2 (PullUP) ----- PA0 (PullUP) ----- 3 (PullUP)
* VCC ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v ----- 3.3v/5v
* GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND ----- GND
*
*/
#include "Arduino.h"
#include "LoRa_E220.h"
// ---------- esp8266 pins --------------
//LoRa_E220 e220ttl(RX, TX, AUX, M0, M1); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(D3, D4, D5, D7, D6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(D2, D3); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(D2, D3); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, D5, D7, D6); // AUX M0 M1
// -------------------------------------
// ---------- Arduino pins --------------
LoRa_E220 e220ttl(4, 5, 3, 7, 6); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX AUX M0 M1
//LoRa_E220 e220ttl(4, 5); // Config without connect AUX and M0 M1
//#include <SoftwareSerial.h>
//SoftwareSerial mySerial(4, 5); // Arduino RX <-- e220 TX, Arduino TX --> e220 RX
//LoRa_E220 e220ttl(&mySerial, 3, 7, 6); // AUX M0 M1
// -------------------------------------
// ------------- Arduino Nano 33 IoT -------------
// LoRa_E220 e220ttl(&Serial1, 2, 4, 6); // RX AUX M0 M1
// -------------------------------------------------
// ------------- Arduino MKR WiFi 1010 -------------
// LoRa_E220 e220ttl(&Serial1, 0, 2, 4); // RX AUX M0 M1
// -------------------------------------------------
// ---------- esp32 pins --------------
// LoRa_E220 e220ttl(&Serial2, 15, 21, 19); // RX AUX M0 M1
//LoRa_E220 e220ttl(&Serial2, 22, 4, 18, 21, 19, UART_BPS_RATE_9600); // esp32 RX <-- e220 TX, esp32 TX --> e220 RX AUX M0 M1
// -------------------------------------
// ---------- Raspberry PI Pico pins --------------
// LoRa_E220 e220ttl(&Serial2, 2, 10, 11); // RX AUX M0 M1
// -------------------------------------
// ---------------- STM32 --------------------
//HardwareSerial Serial2(USART2); // PA3 (RX) PA2 (TX)
//LoRa_E220 e220ttl(&Serial2, PA0, PB0, PB10); // RX AUX M0 M1
// -------------------------------------------------
void printParameters(struct Configuration configuration);
void printModuleInformation(struct ModuleInformation moduleInformation);
void setup() {
Serial.begin(9600);
while(!Serial){};
delay(500);
Serial.println();
// Startup all pins and UART
e220ttl.begin();
ResponseStructContainer c;
c = e220ttl.getConfiguration();
// It's important get configuration pointer before all other operation
Configuration configuration = *(Configuration*) c.data;
Serial.println(c.status.getResponseDescription());
Serial.println(c.status.code);
printParameters(configuration);
// ----------------------- DEFAULT TRANSPARENT -----------------------
configuration.ADDL = 0x03; // First part of address
configuration.ADDH = 0x00; // Second part
configuration.CHAN = 23; // Communication channel
configuration.SPED.uartBaudRate = UART_BPS_9600; // Serial baud rate
configuration.SPED.airDataRate = AIR_DATA_RATE_010_24; // Air baud rate
configuration.SPED.uartParity = MODE_00_8N1; // Parity bit
configuration.OPTION.subPacketSetting = SPS_200_00; // Packet size
configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED; // Need to send special command
configuration.OPTION.transmissionPower = POWER_22; // Device power
configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED; // Enable RSSI info
configuration.TRANSMISSION_MODE.fixedTransmission = FT_TRANSPARENT_TRANSMISSION; // Enable repeater mode
configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED; // Check interference
configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011; // WOR timing
// ----------------------- DEFAULT TRANSPARENT WITH RSSI -----------------------
// configuration.ADDL = 0x03;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_TRANSPARENT_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- FIXED SENDER -----------------------
// configuration.ADDL = 0x02;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
//
// ----------------------- FIXED RECEIVER -----------------------
// configuration.ADDL = 0x03;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- FIXED SENDER RSSI -----------------------
// configuration.ADDL = 0x02;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
//
// ----------------------- FIXED RECEIVER RSSI -----------------------
// configuration.ADDL = 0x03;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
//
// ----------------------- WOR SENDER -----------------------
// configuration.ADDL = 0x02;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
//
// ----------------------- WOR RECEIVER -----------------------
// configuration.ADDL = 0x03;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE 1 -----------------------
// configuration.ADDL = 0x04;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE 2 -----------------------
// configuration.ADDL = 0x05;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE 3 -----------------------
// configuration.ADDL = 0x06;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE RSSI 1 -----------------------
// configuration.ADDL = 0x04;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE RSSI 2 -----------------------
// configuration.ADDL = 0x05;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- BROADCAST MESSAGE RSSI 3 -----------------------
// configuration.ADDL = 0x06;
// configuration.ADDH = 0x00;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_ENABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// ----------------------- MONITORING -----------------------
// configuration.ADDL = BROADCAST_ADDRESS;
// configuration.ADDH = BROADCAST_ADDRESS;
//
// configuration.CHAN = 23;
//
// configuration.SPED.uartBaudRate = UART_BPS_9600;
// configuration.SPED.airDataRate = AIR_DATA_RATE_010_24;
// configuration.SPED.uartParity = MODE_00_8N1;
//
// configuration.OPTION.subPacketSetting = SPS_200_00;
// configuration.OPTION.RSSIAmbientNoise = RSSI_AMBIENT_NOISE_DISABLED;
// configuration.OPTION.transmissionPower = POWER_22;
//
// configuration.TRANSMISSION_MODE.enableRSSI = RSSI_DISABLED;
// configuration.TRANSMISSION_MODE.fixedTransmission = FT_FIXED_TRANSMISSION;
// configuration.TRANSMISSION_MODE.enableLBT = LBT_DISABLED;
// configuration.TRANSMISSION_MODE.WORPeriod = WOR_2000_011;
// Set configuration changed and set to not hold the configuration
ResponseStatus rs = e220ttl.setConfiguration(configuration, WRITE_CFG_PWR_DWN_SAVE);
Serial.println(rs.getResponseDescription());
Serial.println(rs.code);
c = e220ttl.getConfiguration();
// It's important get configuration pointer before all other operation
configuration = *(Configuration*) c.data;
Serial.println(c.status.getResponseDescription());
Serial.println(c.status.code);
printParameters(configuration);
c.close();
}
void loop() {
}
void printParameters(struct Configuration configuration) {
DEBUG_PRINTLN("----------------------------------------");
DEBUG_PRINT(F("HEAD : ")); DEBUG_PRINT(configuration.COMMAND, HEX);DEBUG_PRINT(" ");DEBUG_PRINT(configuration.STARTING_ADDRESS, HEX);DEBUG_PRINT(" ");DEBUG_PRINTLN(configuration.LENGHT, HEX);
DEBUG_PRINTLN(F(" "));
DEBUG_PRINT(F("AddH : ")); DEBUG_PRINTLN(configuration.ADDH, HEX);
DEBUG_PRINT(F("AddL : ")); DEBUG_PRINTLN(configuration.ADDL, HEX);
DEBUG_PRINTLN(F(" "));
DEBUG_PRINT(F("Chan : ")); DEBUG_PRINT(configuration.CHAN, DEC); DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.getChannelDescription());
DEBUG_PRINTLN(F(" "));
DEBUG_PRINT(F("SpeedParityBit : ")); DEBUG_PRINT(configuration.SPED.uartParity, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.SPED.getUARTParityDescription());
DEBUG_PRINT(F("SpeedUARTDatte : ")); DEBUG_PRINT(configuration.SPED.uartBaudRate, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.SPED.getUARTBaudRateDescription());
DEBUG_PRINT(F("SpeedAirDataRate : ")); DEBUG_PRINT(configuration.SPED.airDataRate, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.SPED.getAirDataRateDescription());
DEBUG_PRINTLN(F(" "));
DEBUG_PRINT(F("OptionSubPacketSett: ")); DEBUG_PRINT(configuration.OPTION.subPacketSetting, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.OPTION.getSubPacketSetting());
DEBUG_PRINT(F("OptionTranPower : ")); DEBUG_PRINT(configuration.OPTION.transmissionPower, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.OPTION.getTransmissionPowerDescription());
DEBUG_PRINT(F("OptionRSSIAmbientNo: ")); DEBUG_PRINT(configuration.OPTION.RSSIAmbientNoise, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.OPTION.getRSSIAmbientNoiseEnable());
DEBUG_PRINTLN(F(" "));
DEBUG_PRINT(F("TransModeWORPeriod : ")); DEBUG_PRINT(configuration.TRANSMISSION_MODE.WORPeriod, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getWORPeriodByParamsDescription());
DEBUG_PRINT(F("TransModeEnableLBT : ")); DEBUG_PRINT(configuration.TRANSMISSION_MODE.enableLBT, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getLBTEnableByteDescription());
DEBUG_PRINT(F("TransModeEnableRSSI: ")); DEBUG_PRINT(configuration.TRANSMISSION_MODE.enableRSSI, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getRSSIEnableByteDescription());
DEBUG_PRINT(F("TransModeFixedTrans: ")); DEBUG_PRINT(configuration.TRANSMISSION_MODE.fixedTransmission, BIN);DEBUG_PRINT(" -> "); DEBUG_PRINTLN(configuration.TRANSMISSION_MODE.getFixedTransmissionDescription());
DEBUG_PRINTLN("----------------------------------------");
}
void printModuleInformation(struct ModuleInformation moduleInformation) {
Serial.println("----------------------------------------");
DEBUG_PRINT(F("HEAD: ")); DEBUG_PRINT(moduleInformation.COMMAND, HEX);DEBUG_PRINT(" ");DEBUG_PRINT(moduleInformation.STARTING_ADDRESS, HEX);DEBUG_PRINT(" ");DEBUG_PRINTLN(moduleInformation.LENGHT, DEC);
Serial.print(F("Model no.: ")); Serial.println(moduleInformation.model, HEX);
Serial.print(F("Version : ")); Serial.println(moduleInformation.version, HEX);
Serial.print(F("Features : ")); Serial.println(moduleInformation.features, HEX);
Serial.println("----------------------------------------");
}